Is there any event in C# that fires when the form STOPS being moved. Not while its moving.
If there is no event for it, is there a way of doing it with WndProc?
The ResizeEnd event fires after a move ends. Perhaps you could use that.
This is not a failsafe solution, but it's pure .NET and it's dead simple. Add a timer to your form, set it to a relatively short delay (100-150 ms seemed OK for me). Add the following code for the Form.LocationChanged and Timer.Tick events:
private void Form_LocationChanged(object sender, EventArgs e)
{
if (this.Text != "Moving")
{
this.Text = "Moving";
}
tmrStoppedMoving.Start();
}
private void Timer_Tick(object sender, EventArgs e)
{
tmrStoppedMoving.Start();
this.Text = "Stopped";
}
If you want more exact handling (knowing exactly when the mouse button is release in the title bar and such) you will probably need to dive into monitoring windows messages.
I had the same problem with a user control, but it does not have the ResizeEnd event. The solution, which worked is to override the WndProc method and listen for EXITSIZEMOVE.
See example here
Just set a flag to true when onmove events are fired. If a mouseup event happens and the flag is true, the form stopped being moved.
I admit this probably won't work in the case of a user moving a form via the keyboard, but that's pretty rare.
I tested ResizeChanged event, and it works fine, however I don't know relation between move and resize, but it works for me
Related
Is there an event for panel that is equivalent to form event Shown?
I had a few couple of panel switching within a form which will never be closed.
However i couldn't find anything close to an event like Shown which is used in form.
The closes i had is Paint event. However i only wish to update the panel once every time it is shown.
Form.Shown is not raised every time the form is shown, rather it Occurs whenever the form is first displayed. This being said, there is no Panel.Shown event, and no event which is raised "whenever a panel is first displayed".
You can simulate this behavior with the Panel.Paint event, using a flag to keep track of whether it's been "shown" once before. This will make it behave similar to Form.Shown.
private bool panel1Painted = false;
private void panel1_Paint(object sender, PaintEventArgs e)
{
if (!panel1Painted)
{
// do your shown stuff here
panel1Painted = true;
}
}
To keep in the spirit of Form.Shown, you may want to reset the flag if the Panel is reconstructed. This is not the same as shown.
You could listen on the VisibleChanged event and only act on when visibility = true.
https://msdn.microsoft.com/en-us/library/system.windows.forms.panel_events%28v=vs.110%29.aspx?f=255&MSPPError=-2147217396
You could also experiment with the Enter and Invalidated events to see if these give you the results you want.
Or if disabling the panel when leaving it is an option, you might be able to use the EnabledChanged event in your toolbox.
My small windows form application has two radio buttons, and initially neither is checked. Until one of them is checked, the "Go" button should be disabled.
I found a very simple way to obtain this, but I'm not sure if I'm setting myself up for a random crash.
I added a timer component, enabled it, and in the Tick event:
private void timer1_Tick(object sender, EventArgs e)
{
bool canGo = (_usRadioButton.Checked || _intlRadioButton.Checked);
if (_goButton.Enabled != canGo)
{
_goButton.Enabled = canGo;
}
}
I know there are other ways to do this, I'm just curious if this way is valid or if I'm going to have an end user throwing exceptions when the timer is firing at the same time the form is updating the Checked property on one of the checkboxes?
If I understood you correctly, you already know about the CheckedChanged event, and are only asking about conflicts in your code. So:
As far as I know it's not multithreading, and there's no danger. The Tick event will actually not fire at the same time the computer is updating the Checked state.
If you place traces in Form.Load and Timer.Tick:
private void Form_Load(object sender, EventArgs e)
{
Console.WriteLine("Form_Load/Thread.CurrentThread.ManagedThreadId=" + Thread.CurrentThread.ManagedThreadId);
}
private void timer1_Tick(object sender, EventArgs e)
{
Console.WriteLine("timer1_Tick/Thread.CurrentThread.ManagedThreadId=" + Thread.CurrentThread.ManagedThreadId);
}
The results show:
Form_Load/Thread.CurrentThread.ManagedThreadId=9
timer1_Tick/Thread.CurrentThread.ManagedThreadId=9
A better solution is to subscribed to the CheckedChanged event of your radio buttons and then enable the "Go" button in that event handler.
This will solve any timing problems you will encounter with this approach.
I'm not certain that it's safer, but you could also subscribe to the CheckedChanged event and use that handler code to enable the Go button. This would save you a timer that would have to run indefinitely.
How to capture mouse wheel on panel in C#?
I'm using WinForms
EDIT:
I try to do it on PictureBox now.
My code:
this.pictureBox1.MouseClick += new System.Windows.Forms.MouseEventHandler(this.pictureBox1_MouseClick);
this.pictureBox1.MouseWheel += new System.Windows.Forms.MouseEventHandler(this.pictureBox1_MouseClick);
private void pictureBox1_MouseClick(object sender, MouseEventArgs e)
{
MessageBox.Show("Click");
}
Clicking works. Wheelling doesn't.
Why?
If you can't see the "MouseWheel" event on a component, then you need to create it manually. Also, we need to focus that component, otherwise the "MouseWheel" event will not work for that component. I will show you how to create a "MouseWheel" event for "pictureBox1" and how it works.
INSIDE THE CONSTRUCTOR, create a mousewheel event on that component.
InitializeComponent();
this.pictureBox1.MouseWheel += pictureBox1_MouseWheel;
CREATE THE FUNCTION manually. According to my example, call it "pictureBox1_MouseWheel"
private void pictureBox1_MouseWheel(object sender, MouseEventArgs e)
{
//you can do anything here
}
CREATE a MouseHover event on that component (Go to properties in PicureBox1, select event, locate "MouseHover" and double-click the "MouseHover" event).
CALL "Focus()"; method inside that MouseHover event.
pictureBox1.Focus();
Now run the program.
Windows sends the WM_MOUSEWHEEL message to the control that has the focus. That won't be Panel, it is not a control that can get the focus. As soon as you put a control on the panel, say a button, then the button gets the focus and the message.
The button however has no use for the message, it's got nothing to scroll. Windows notices this and sends the message to the parent. That's the panel, now it will scroll.
You'll find code for a custom panel that can get the focus in this answer.
UPDATE: note that this behavior has changed in Windows 10. The new "Scroll inactive windows when I hover over them" option is turned on by default. The makes the mouse wheel behavior more consistent with the way it works in a browser or, say, an Office program. In this specific case the picturebox now will get the event. Watch out for this.
To wire it up manually...
this.panel1.MouseWheel += new System.Windows.Forms.MouseEventHandler(this.panel1_MouseWheel);
private void panel1_MouseWheel(object sender, System.Windows.Forms.MouseEventArgs e)
{
///process mouse event
}
Easier method is in visual studio click on panel, goto properties viewpanel, select events, locate and double click the "mousewheel" event.
In Winforms, this is achieved using the Control.MouseWheel event
Getting mousewheel events is tricky. The easiest way is using
this.MouseWheel += new System.Windows.Forms.MouseEventHandler(this.panel1_MouseWheel);
instead of
this.panel1.MouseWheel += new System.Windows.Forms.MouseEventHandler(this.panel1_MouseWheel);
This way the form gets the event instead of control. This way is easy but has one problem: you can use only one mousewheel event in your form.
If you have more than one control to get mousewheel event the best way is This answer by "Shehan Silva - weltZ"
I have this simple code, where when the user leaves the TextBox control, TreeView gets focused:
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
private void Form1_Load(object sender, EventArgs e)
{
this.treeView1.Nodes.Add("A");
this.treeView1.Nodes[0].Nodes.Add("A.A");
this.treeView1.Nodes.Add("B");
this.treeView1.Nodes[0].Nodes.Add("B.A");
}
private void textBox1_Leave(object sender, EventArgs e)
{
System.Diagnostics.Debug.WriteLine("Leave..");
this.treeView1.Focus();
}
}
If we execute this code the Leave event is fired twice:
Leave..
Leave..
But if we set focus to other control, only one Leave event is fired.
Is that a problem of the TreeView? Do you know any workaround? Should we report this to Microsoft?
Thanks,
RG
this.treeView1.Focus();
Do not use the Focus() method in an event handler that's called because of a focusing event, like Leave. If you need to prevent a focus change then use the Validating event instead. Setting e.Cancel = true stops it.
But do note that this isn't very logical to do so for a TreeView, there isn't anything the user can do to alter the state of the control. You'll trap the user. Maybe that was the intention, do make sure the user can still close the window. If not then you might need the FormClosing event to force e.Cancel back to false.
Given that there is no code there to wire up the event I'm guessing you did it from the designer which means a line of code such as
textBox1.Leave += new EventHandler(textBox1_Leave);
will have been added to the Form1.designer.cs, check this file to ensure the line doesn't exist more than once as for each time this line is run you will get an event trigger, so if you run the line 3 times the Leave event will fire 3 times when you leave the textbox!
HTH
OneShot
using c# winforms vs2008
I've got a textbox on a form with a method being called from the textBox1_Leave event. The method takes the contents of the textbox in question and populates other textboxes based on the contents.
My problem is that is the user has focus on the text box then clicks the button to close the form (calling this.close) then the form does not close because the textbox leave event gets fired.
If the textbox does not have focus on form close then the form closes fine.
If however a user closes the form by clicking the little X close icon in the top corner the it closes fine all the time with out the textbox leave event being fired.
How can I duplicate the X close functionality so that I can always close the form without the textbox leave event being fired?
The simplest solution is going to be to check which control is actually focused before doing your post-processing - but you can't do it in the Leave handler, because the focus will still be on the text box at that point.
Instead, you need to move your logic to the LostFocus event, which is not in the designer. You'll have to wire it up at runtime:
public class Form1 : Form
{
public Form1()
{
InitializeComponent();
textBox1.LostFocus += new EventHandler(textBox1_LostFocus);
}
private void textBox1_LostFocus(object sender, EventArgs e)
{
if (closeButton.Focused)
return;
// Update the other text boxes here
}
}
The LostFocus event happens to fire after the new control receives focus.
Clarification - you might find that it works by putting this logic in the Leave event - if the focus is changed by the mouse. If the keyboard is used instead, you'll get the wrong behaviour. LostFocus is reliable in both cases - the focused control will always be the "new" control. This is documented on MSDN: Order of Events in Windows Forms.
Incidentally, the reason why you're not having this problem with the "red X" is that the X is not actually a control that can receive focus, it's part of the window. When the user clicks that, it's not causing the text box to lose focus, and therefore isn't causing the Leave event to fire.
Another approach:
Use the textbox's validating event instead of it's leave event, then change the button's CausesValidation property to false. You will also have to set the textbox to not cause validation in the button's click event so the validating event will not fire when the form is closing (thanks to #Powerlord for pointing this out).
private void button1_Click(object sender, EventArgs e)
{
this.textBox1.CausesValidation = false;
this.Close();
}
You could also handle the FormClosing event and make sure the e.Cancel argument does not get set to true by the validating events on the other controls on the form. I think they will be fired off before the FormClosing event.
private void MainForm_FormClosing(object sender, FormClosingEventArgs e)
{
if (e.CloseReason == CloseReason.UserClosing)
{
e.Cancel = false;
return;
}
}
you can check to see which control has just got focus.
private void textBox1_Leave(object sender, EventArgs e)
{
if (btnClose.Focused)
return;
// go from here
}
Just check if the form owning the textbox is disposing? If it's getting closed, it's disposing. If it's disposing you could simply end the pesky 'leave' event without doing anything. I didn't check it and forgive me, I'm choked on a project of my own so and I was searching myself, so I don't think I'll have time for that.
private void GuiltyTextBox_Leave(object sender, EventArgs e) {
Form formOwningTheTextBox=(Form)((Control)sender).TopLevelControl;
if (formOwningTheTextBox.Disposing || formOwningTheTextBox.IsDisposed) return;
.......
}
I just believe this is going to work with minimum effort and wanted to send a quick answer before I resume searching my own answer.
Write Following line of code in text box leave event on top
if me.closing then
return
end if