I'm a web developer building my first production grade console application (C# .NET 4.0). I have a question about creating a settings file that the user can edit before running the console app (to customize output folder paths, etc).
I'm a little confused -- when I publish my console application and install it (by clicking on on the generated setup.exe file in my target publish folder), all I get is an entry to my start menu. Nothing gets installed to C:\Windows\Programs, and there doesn't seem to be anywhere else on my system that files get installed to. Essentially, I'm just trying to find the app.config xml file so that I can edit it after the program has been installed. (btw, when I click on the start menu entry, the program executes properly).
Is what I'm trying to do possible?
For a clickonce deployment, the files will be installed under the profile of the user who installed the application (by default).
For windows XP this should be:
C:\Documents and Settings\username\LocalSettings\Apps...
For Windows 7 (and Vista?) this should be:
C:\users\username\AppData\Local\Apps...
An installation program for your software is a separate piece of software.
You can definitely make one but when you compile your console app it doesn't create an installation executable. It just makes it's own executable. You can copy that executable alone and run it. If you need more resources to go along with it and therefore decide you want an installation program, you have lots of options.
The two that spring to mind in this case though, are setting your project to use "ClickOnce" from the project properties, or adding a "Setup and Deployment" project to your solution from the "Other project types" section of the add project dialog box.
Related
I have a very simple Windows Forms application (not the one with the .NET Framework) and I want to make an installer for it. The problem is that whenever I'm trying to run the installed application, it displays an error saying that it requires .NET Core to run, even if it's already installed. I tried including everything from the project output folder, including .exe and .dll files, but that doesn't seem to work. Here's how installer project files look like.
Please check out my nanny-level teaching！
Environment：
1.Add Enxtention:
2.Install Microsoft Visual Studio Installer Project：
3.Closs the ide to start installing:
4.Create a setup project:
5.Modify the information as needed:
6.Right click Setup (Application Folder) > add > file > (all the file)：
7.Then create a shortcut, cut it to User Desktop and, after creating a shortcut, put it in User Program:
8.Build：
8.Install and run:
Now I have a completed program, that needs to be deployed with some files. I would like to ask, if it is possible to deploy the program without the use of ClickOnce or other external tools, with the minimum amount of required files?
The program will run on a server, and will be updated locally, but since the program is installed per user, does that mean if I log in to the server with my user, a person that uses the direct path to the program will not find it? It also makes maintaining the program slightly more annoying, because when changes come, the current maintainer will have to always navigate to the xyz folder to edit one config file. How do I publish the program without ClickOnce or other tools?
Your options include:
Click once (which you don't want)
Visual Studio installer Projects
WiX Toolset
Other installers ...
Write an installer on your own (wouldn't recommend)
Just put the exe (and other needed files) in some directory and launch the program
Put the exe on a shared location and launch from there
You can redistribute as a set of files. However I would not recommend this approach. You force the person who deploys your program :
Choose location for the files
Remember this location when time to uninstall comes.
Handle updates and version management
Restore program functionality if any of the required files will get damaged.
You can use VS Setup project template, here's tutorial
Alternatively you can use free Wix installer, it has a bit of a learning curve but provides much more power to the developer.
You can do perMachine install both with VS setup project and with wix.
I wrote a fairly simple application with C#/.NET and can't figure out a good way to publish it. It's a sort of a "tool" that users would only run once, or run every few months. Because of this, I'm hoping that there is a way I could deploy it where it wouldn't need installing to run (it could just be run by double-clicking an EXE file straight after downloading).
However, it still needs (somehow) to include the correct version of .NET, libraries, etc. so it will run correctly. I know this is included when using ClickOnce, but that still installs the application onto the user's computer.
Is there a way this can be done?
EDIT - \bin\Debug
myAppName.application
myAppName.exe
myAppName.exe.config
myAppName.exe.manifest
myAppName.pdb
myAppName.vshost.application
myAppName.vshost.exe
myAppName.vshost.exe.config
myAppName.vshost.exe.manifest
extraLibrary.dll
as well as two folders
app.publish
Resources
It is possible and is deceptively easy:
"Publish" the application (to, say, some folder on drive C), either from menu Build or from the project's properties → Publish. This will create an installer for a ClickOnce application.
But instead of using the produced installer, find the produced files (the EXE file and the .config, .manifest, and .application files, along with any DLL files, etc.) - they are all in the same folder and typically in the bin\Debug folder below the project file (.csproj).
Zip that folder (leave out any *.vhost.* files and the app.publish folder (they are not needed), and the .pdb files unless you foresee debugging directly on your user's system (for example, by remote control)), and provide it to the users.
An added advantage is that, as a ClickOnce application, it does not require administrative privileges to run (if your application follows the normal guidelines for which folders to use for application data, etc.).
As for .NET, you can check for the minimum required version of .NET being installed (or at all) in the application (most users will already have it installed) and present a dialog with a link to the download page on the Microsoft website (or point to one of your pages that could redirect to the Microsoft page - this makes it more robust if the Microsoft URL change). As it is a small utility, you could target .NET 2.0 to reduce a user's probability to install .NET.
It works. We use this method during development and test to avoid constantly uninstalling and installing the application and still being quite close to how the final application will run.
First, you need to publish the file by:
BUILD -> PUBLISH or by right clicking project on Solution Explorer -> properties -> publish or select project in Solution Explorer and press Alt + Enter
NOTE: if you are using Visual Studio 2013 then in properties you have to go to BUILD and then you have to disable define DEBUG constant and define TRACE constant and you are ready to go.
Save your file to a particular folder.
Find the produced files (the EXE file and the .config, .manifest, and .application files, along with any DLL files, etc.) - they are all in the same folder and type in the bin\Debug folder below the project file (.csproj).
In Visual Studio they are in the Application Files folder and inside that, you just need the .exe and dll files.
(You have to delete ClickOnce and other files and then make this folder a zip file and distribute it.)
NOTE: The ClickOnce application does install the project to the system, but it has one advantage. You DO NOT require administrative privileges here to run (if your application follows the normal guidelines for which folders to use for application data, etc.).
I've just tried ClickOnce for the first time to deploy my SQL Server Compact application. I think this kind of deployment is very unprofessional:
The output setup is a folder including 3 objects, one folder named Application Files, a setup.exe and a .application file which I've never seen in a professional product setup package.
Plus, clicking setup.exe seems to help user install the application so quickly but user has no chance to select what location s/he wants to install the application. It's installed by default at somewhere in the target computer. And even I tried looking for its location after the installation, I couldn't find it.
The last, after the installation, there is a folder named "Microsoft" in All programs menu, and the installed application shortcut is located in there. I wonder why it is always Microsoft? I even tried editing my Company info in Assembly info through Project Properties window. The application shortcut is something strange when I can't find its target executable file in its properties window.
With all the above ClickOnce can bring to me, I consider it as a funny job for testing the application only not for publishing a commercial application.
Could you please correct me if there is any wrong in #1, #2, #3 and please give me a better solution for deployment, I'm interested in SQL server (service-based and file-based) application only?
Your help would be highly appreciated. Thanks.
A ClickOnce install is a per user "sandboxed" install, not a normal install you think about when installing normal applications. The .application file is used by the server as a manifest and to determine if it needs to update the install when clicked.
The reason you can't find setup.exe is because it isn't there. Once the files are installed, it isn't kept. The user isn't supposed to know where the files are, the system manages the location and updating of the app.
So, with all that, it appears you need a more normal install, not a ClickOnce. ClickOnce isn't intended to install services or other per machine files.
I have a C# project that I've written using the .NET 4 framework, I've created an installation project using the setup wizard within the solution, the problem is that once the program is installed and I launch it, a dialog appears saying that the program is being configured and then starts the program, why is this? Is it necessary? How can i prevent this from appearing or happening altogether?
UPDATE
I installed my application and launched the application from the .exe created in Program Files and a config window didn't appear and the app launched normally! How do i create a link to this shortcut without it showing the windows shown above? As i need to place a shortcut to the users startup folder.
This happens because Windows Installer detects missing resources. For example, some of the installed files were moved/removed/renamed or were installed per-user for another user account.
Here is an article with more details: http://setupanddeployment.com/general-installation-problems/preparing-install-popping/
You can use Event Viewer to determine which resource is causing this, like explained in the article I mentioned.
The MSI file has auto-repair enabled. I don't think VS has an option to turn it off.
The shortcut links generated don't actually link to the files they should. They link to an executable in appdata. When that file's opened, it runs the installer repair check silently and opens the configuring dialog while any repairs take place. For some reason the installer thinks that files installed with your program are being deleted / corrupted. Perhaps temporary or configuration files?
This link given in this question should fix it if that's the case, but it'll still be activated if the user hits Repair in Add/Remove programs.