Im really trying to learn regex so here it goes.
I would really like to get all words in a string which do not have a "/" on either side.
For example, I need to do this to:
"Hello Great /World/"
I need to have the results:
"Hello"
"Great"
is this possible in regex, if so, how do I do it? I think i would like the results to be stored in a string array :)
Thank you
Just use this regular expression \b(?<!/)\w+(?!/)\b:
var str = "Hello Great /World/ /I/ am great too";
var words = Regex.Matches(str, #"\b(?<!/)\w+(?!/)\b")
.Cast<Match>()
.Select(m=>m.Value)
.ToArray();
This will get you:
Hello
Great
am
great
too
var newstr = Regex.Replace("Hello Great /World/", #"/(\w+?)/", "");
If you realy want an array of strings
var words = Regex.Matches(newstr, #"\w+")
.Cast<Match>()
.Select(m => m.Value)
.ToArray();
I would first split the string into the array, then filter out matching words. This solution might also be cleaner than a big regexp, because you can spot the requirements for "word" and the filter better.
The big regexp solution would be something like word boundary - not a slash - many no-whitespaces - not a slash - word boundary.
I would use a regex replace to replace all /[a-zA-Z]/ with '' (nothing) then get all words
Try this one : (Click here for a demo)
(\s(?<!/)([A-Za-z]+)(?!/))|((?<!/)([A-Za-z]+)(?!/)\s)
Using this example excerpt:
The /character/ "_" (underscore/under-strike) can be /used/ in /variable/ names /in/ many /programming/ /languages/, while the /character/ "/" (slash/stroke/solidus) is typically not allowed.
...this expression matches any string of letters, numbers, underscores, or apostrophes (fairly typical idea of a "word" in English) that does not have a / character both before and after it - wrapped with a "/"
\b([\w']+)\b(?<=(?<!/)\1|\1(?!/))
...and is the purest form, using only one character class to define "word" characters. It matches the example as follows:
Matched Not Matched
------------- -------------
The character
_ used
underscore variable
under in
strike programming
can languages
be character
in stroke
names
many
while
the
slash
solidus
is
typically
not
allowed
If excluding /stroke/, is not desired, then adding a bit to the end limitation will allow it, depending upon how you want to define the beginning of a "next" word:
\b([\w']+)\b(?<=(?<!/)\1|\1(?!/([^\w]))).
changes (?!/) to (?!/([^\w])), which allows /something/ if it does have a letter, number, or underscore immediately after it. This would move stroke from the "Not Matched" to the "Matched" list, above.
note: \w matches uppercase or lowercase letters, numbers and the underscore character
If you want to alter your concept for "word" from the above, simply exchange the characters and shorthand character classes contained in the [\w'] part of the expression to something like [a-zA-Z'] to exclude digits or [\w'-] to include hyphens, which would capture under-strike as a single match, rather than two separate matches:
\b([\w'-]+)\b(?<=(?<!/)\1|\1(?!/([^\w])))
IMPORTANT ALTERNATIVE!!! (I think)
I just thought of an alternative to Matching any words that are not wrapped with / symbols: simply consume all of these symbols and words that are surrounded in them (splitting). This has a few benefits: no lookaround means this could be used in more contexts (JavaScript does not support lookbehind and some flavors of regex don't support lookaround at all) while increasing efficiency; also, using a split expression means a direct result of a String array:
string input = "The /character/ "_" (underscore/under-strike) can be..."; //etc...
string[] resultsArray = Regex.Split(input, #"([^\w'-]+?(/[\w]+/)?)+");
voila!
Related
Imagine a string that contains special characters like $§%%,., numbers and letters.
I want to receive the letter and number junks of an arbitrary string as an array of strings.
A good solution seems to be the use of regex, but I don't know how to express [numbers and letters]
// example
"abc" = {"abc"};
"ab .c" = {"ab", "c"}
"ab123,cd2, ,,%&$§56" = {"ab123", "cd2", "56"}
// try
string input = "jdahs32455$§&%$§df233§$fd";
string[] output = input.Split(Regex("makejunksfromstring"));
To extract chunks of 1 or more letters/digits you may use
[A-Za-z0-9]+ # ASCII only letters/digits
[\p{L}0-9]+ # Any Unicode letters and ASCII only digits
[\p{L}\p{N}]+ # Any Unicode letters/digits
See a regex demo.
C# usage:
string[] output = Regex.Matches(input, #"[\p{L}\p{N}]+").Cast<Match>().Select(x => x.Value).ToArray();
Yes, regex is indeed a good solution for this.
And in fact, to just match all standard words in the input sequence, this is all you need:
(\w+)
Let me quickly explain
\w matches any word character and is equivalent to [a-zA-Z0-9_] - matching a through z or A through Z or 0-9 or _, you might wanna go with [a-zA-Z0-9] instead to avoid that underscore.
Wrapping an expression in () means that you want to capture that part as a group.
The + means that you want sequences of 1 or more of the preceding characters.
Refer to a regular expression cheat sheet to see all the possibilities, such as
https://cheatography.com/davechild/cheat-sheets/regular-expressions/
Or any that you find online.
Also there are tools available to quickly test out your regular expressions, such as
https://regex101.com/ (quite well visualised matching)
or http://regexstorm.net/tester specifically for .NET
I have this regular expression :
string[] values = Regex
.Matches(mystring4, #"([\w-[\d]][\w\s-[\d]]+)|([0-9]+)")
.OfType<Match>()
.Select(match => match.Value.Trim())
.ToArray();
This regular expression turns this string :
MY LIMITED COMPANY (52100000 / 58447000)";
To these strings :
MY LIMITED COMPANY - 52100000 - 58447000
This also works on non-English characters.
But there is one problem, when I have this string : MY. LIMITED. COMPANY. , it splits that too. I don't want that. I don't want that regular expression to work on dots. How can I do that? Thanks.
You may add the dot after each \w in your pattern, and I also suggest removing unnecessary ( and ):
string[] values = Regex
.Matches("MY. LIMITED. COMPANY. (52100000 / 58447000)", #"[\w.-[\d]][\w.\s-[\d]]+|[0-9]+")
.OfType<Match>()
.Select(match => match.Value.Trim())
.ToArray();
foreach (var s in values)
Console.WriteLine(s);
See the C# demo
Pattern:
[\w.-[\d]] - one Unicode letter or underscore ([\w-[\d]]) or a dot (.)
[\w.\s-[\d]]+ - 1 or more (due to + quantifier at the end) characters that are either Unicode letters or underscore, ., or whitespace (\s)
| - or
[0-9]+ - one or more ASCII-only digits
I'd simplify the expression. What if the names in the front include numbers? Not that my solution doesn't exactly mimic the original expression. It will allow numbers in the name part.
Let's start from the beginning:
To match words all you need is a sequence of word characters:
\w+
This will match any alphanumerical characters including underscores (_).
Considering you want the possibility of the word ending with a dot, you can add it and make it optional (one or zero matches):
\w+\.?
Note the escape to make it an actual character rather than a character class "any character".
To match another potential word following, we now simply duplicate this match, add a white space before, and once again make it optional using the * quantifier:
\w+\.?(?:\w+\.?)*
In case you haven't seen a group starting with ?: is a non-matching group. In essence this works like a usual group, but won't save a matching group in your results.
And that's it already. This pattern will split your demo string as expected. Of course there could be other possible characters not being covered by this.
You can see the results of this matching online here and also play around with it.
To test your regular expressions (and to learn them), I'd really recommend you using a tool such as http://regex101.com
It has an input mask allowing you to provide your pattern and your target string. On the right hand side it will first explain the pattern to you (to see if it's indeed what you had in mind) and below it will show all the groups matched. Just keep in mind it actually uses slightly different flavors of regular expressions, but this shouldn't matter for such simple patterns. (I'm not affiliated with that site, just consider it really useful.)
As an alternative, to directly use C#'s regex parser, you can also try this Regex Tester. This works in a similar way, although doesn't include any explanations, which might be not as ideal for someone just getting started.
I'm looking for a regular expression to extract a string from a file name
eg if filename format is "anythingatallanylength_123_TESTNAME.docx", I'm interested in extracting "TESTNAME" ... probably fixed length of 8. (btw, 123 can be any three digit number)
I think I can use regex match ...
".*_[0-9][0-9][0-9]_[A-Z][A-Z][A-Z][A-Z][A-Z][A-Z][A-Z][A-Z].docx$"
However this matches the whole thing. How can I just get "TESTNAME"?
Thanks
Use parenthesis to match a specific piece of the whole regex.
You can also use the curly braces to specify counts of matching characters, and \d for [0-9].
In C#:
var myRegex = new Regex(#"*._\d{3}_([A-Za-z]{8})\.docx$");
Now "TESTNAME" or whatever your 8 letter piece is will be found in the captures collection of your regex after using it.
Also note, there will be a performance overhead for look-ahead and look-behind, as presented in some other solutions.
You can use a look-behind and a look-ahead to check parts without matching them:
(?<=_[0-9]{3}_)[A-Z]{8}(?=\.docx$)
Note that this is case-sensitive, you may want to use other character classes and/or quantifiers to fit your exact pattern.
In your file name format "anythingatallanylength_123_TESTNAME.docx", the pattern you are trying to match is a string before .docx and the underscore _. Keeping the thing in mind that any _ before doesn't get matched I came up with following solution.
Regex: (?<=_)[A-Za-z]*(?=\.docx$)
Flags used:
g global search
m multi-line search.
Explanation:
(?<=_) checks if there is an underscore before the file name.
(?=\.docx$) checks for extension at the end.
[A-Za-z]* checks the required match.
Regex101 Demo
Thanks to #Lucero #noob #JamesFaix I came up with ...
#"(?<=.*[0-9]{3})[A-Z]{8}(?=.docx$)"
So a look behind (in brackets, starting with ?<=) for anything (ie zero or more any char (denoted by "." ) followed by an underscore, followed by thee numerics, followed by underscore. Thats the end of the look behind. Now to match what I need (eight letters). Finally, the look ahead (in brackets, starting with ?=), which is the .docx
Nice work, fellas. Thunderbirds are go.
I have a string "myname 18-may 1234" and I want only "myname" from whole string using a regex.
I tried using the \b(^[a-zA-Z]*)\b regex and that gave me "myname" as a result.
But when the string changes to "1234 myname 18-may" the regex does not return "myname". Please suggest the correct way to select only "myname" whole word.
Is it also possible - given the string in
"1234 myname 18-may" format - to get myname only, not may?
UPDATE
Judging by your feedback to your other question you might need
(?<!\p{L})\p{L}+(?!\p{L})
ORIGINAL ANSWER
I have come up with a lighter regex that relies on the specific nature of your data (just a couple of words in the string, only one is whole word):
\b(?<!-)\p{L}+\b
See demo
Or even a more restrictive regex that finds a match only between (white)spaces and string start/end:
(?<=^|\s)\p{L}+(?=\s|$)
The following regex is context-dependent:
\p{L}+(?=\s+\d{1,2}-\p{L}{3}\b)
See demo
This will match only the word myname.
The regex means:
\p{L}+ - Match 1 or more Unicode letters...
(?=\s+\d{1,2}-\p{L}{3}\b) - until it finds 1 or more whitespaces (\s+) followed with 1 or 2 digits, followed with a hyphen and 3 Unicode letters (\p{L}{3}) which is a whole word (\b). This construction is a positive look-ahead that only checks if something can be found after the current position in the string, but it does not "consume" text.
Since the date may come before the string, you can add an alternation:
\p{L}+(?=[ ]+\d{1,2}-\p{L}{3}\b)|(?<=\d{1,2}-\p{L}{3}[ ]+)\p{L}+
See another demo
The (?<=\d{1,2}-\p{L}{3}\s+) is a look-behind that checks for the same thing (almost) as the look-ahead, but before the myname.
here is a solution without RegEx
string input = "myname 18-may 1234";
string result = input.Split(' ').Where(x => x.All(y => char.IsLetter(y))).FirstOrDefault();
Do a replace using this regex:
(\s*\d+\-.{3}\s*|\s*.{3}\-\d+\s*)|(\s*\d+\s*)
you will end up with just your name.
Demo
I would like to be able to match and then extract all substrings in the following string using regex in c#:
"2012-05-15 00:49:02 192.168.100.10 POST /Microsoft-Server-ActiveSync/default.eas User=nikced&DeviceId=ApplDNWGRKZQDTC0&DeviceType=iPhone&Cmd=Ping&Log=V121_Sst8_LdapC0_LdapL0_RpcC31_RpcL50_Hb3540_Erq1_Pk1728465481_S2_ 443 redcloud\nikced 94.234.170.42 Apple-iPhone4C1/902.179 200 0 64 3140491"
Since it's a logfile it the regex should be able to handle any line that is of a similar type.
In this case, the preferred output to a collection should be:
2012-05-15
00:49:02
192.168.100.10
/Microsoft-Server-ActiveSync/default.eas
User=nikced&DeviceId=ApplDNWGRKZQDTC0&DeviceType=iPhone&Cmd=Ping&Log=V121_Sst8_LdapC0_LdapL0_RpcC31_RpcL50_Hb3540_Erq1_Pk1728465481_S2_
443
redcloud\nikced
94.234.170.42
Apple-iPhone4C1/902.179
200
0
64
3140491
Appreciate any answer using C#, .net and Regex to extract the above substrings into a collection (MatchCollection preferred). All log lines follows the same format and pattern.
Incredibly complex regex incoming:
logFile.Split(' ');
This will give you an array that you can iterate through to retrieve all of the "lines" which are separated by a space
string[] lines = log.Split(' ');
You don't need to use a Regex. You can simply use String.Split Method, and specify space as separator:
string [] substrings = line.Split(new Char [] {' '});
If you need to identify the kind of each part, then you should specify what you need to find, and a regex can be created for it.
Anyway, if you really want to use a Regex, do this:
Regex re = new Regex (#"(?:(?<s>[^ ]+)(?: |$))*");
This will give you all the captures in the "s" group, when you call the Match method.
As the OP pointed out in a comment that the separator can be anything appart from a single space, then the possible separators should be included in the (?: |$) and the [^ ] parts of the expression. I.e. if space as well as tab are possible separators, replace that part with (?: |\t|$) and [^ \t]. If you need to accept more than one of those characters as separators, add a + after the () group:
(?:(?<s>[^ \t]+)(?: |\t|$)+)*
The fastest and most obvious way is to use String.Split:
string[] substrings = result = line->Split( nullptr, StringSplitOptions::RemoveEmptyEntries );
But if you insist on a MatchCollection then this will do what you want
MatchCollection ^ substrings = Regex.Matches(line, "\\S+")
Really, you just need to break this down into the parts.
First, the date. Will it always be in YYYY-MM-DD format? Could it be possible that it will be different based on region/culture settings?
(?<LogDate>dddd-dd-dd)
Next, you have the time. Same thing:
(?<LogTime>dd:dd:dd)
Next, I'm assuming this is the web method that was actually called? Not entirely sure, since you haven't really explained how the data is laid out. However, I'm assuming it's either going to be either POST or GET, so that's what we're going to do next...
(?<LogMethod>POST|GET)
Just do this for every part of the log line you're interested in, and you'll be set. IE:
(?<LogDate>dddd-dd-dd) (?<LogTime>dd:dd:dd) (?<LogMethod>POST|GET)...
If you want to anchor to the start/end of the line, be sure to use ^ and $ respectively. When you get the Matches, you can get the values from each group by indexing the Groups property with the named group (such as match.Groups["LogMethod"].Value). Good luck!