silently execute a MSI package from C# - c#

Newbie question, let me try and make this as clear as possible. I have a program that needs to silently execute a msi package (well multiple but that's not the problem)
The MSI packages are contained in a folder located in the same directory as my program. I've given it a simple name of "InstallFiles" for the time being.
I'm not keen on using the full path name eg. C:\my program\another directory\another directory etc because it'll be put on multiple PC's, old and new, in which case the drive letter can change. So far I have:
install.StartInfo.FileName = "msiexec";
install.StartInfo.Arguments = "/i F:\\InstallFiles\\JRE.msi";
install.Start();
install.WaitForExit();
However, when its launched it only gives me the Windows Installer switch information and then terminates, how do I get it to run and how would I go about changing the file path?

use with the following switch:
/q[n|b|r|f]
Sets user interface level
n - No UI
b - Basic UI
r - Reduced UI
Check http://msdn.microsoft.com/en-us/library/windows/desktop/aa367988%28v=vs.85%29.aspx for detailed commandline options.

The executing of .msi file should be like .exe file that here is your answer : https://stackoverflow.com/a/12436300/359170
start the application with this code :
Process.Start("yourfile.msi");
and it don't need the full path, it adds current directory to the file name you written there.
But
System.IO.Directory.GetCurrentDirectory();
gets the current executed file directory. And you can get the file path by adding just the name of the file to it like this :
string path = System.IO.Directory.GetCurrentDirectory() + "\\yourfile.msi";

Related

Program crashes when run not from own directory

A basic question:
I have a C# Windows application which runs fine when executed from its own directory, by typing
program1.exe
but when I execute it from another directory giving full path like
d:/progs/myprog/program1.exe
it crashes. And I really need to do it this way :)
I suppose it is connected to reading some files by the program which are in the same directory. My suspected line is:
using (XmlReader OdczytywaczXML = XmlReader.Create(#"config.xml"))
Can it be the problem? I wouldn't like to give full paths to files as I'd like my program to work anywhere just by copying the files.
Oh, and I have no idea how to simulate such condition (running from another directory) while debugging - is it possible?
You should detect your program location and construct full path to config.xml in this case, for example:
var filePath = Path.Combine(
Path.GetDirectoryName(Assembly.GetEntryAssembly().Location),
#"config.xml");
To simulate condition, go to project properties, page "Debug" and set Working Directory.
This is surely the problem. You can add directory information on that line. In WinForms you can use Application.StartupPath for example.
In General you can use System.Reflection.Assembly.GetExecutingAssembly().Location
The issue is that the Working Directory isn't the same when you just execute it from the command-line. You'll want to safeguard this:
var path = Path.Combine(Assembly.GetExecutingAssembly().Location, "config.xml");
using (XmlReader OdczytywaczXML = XmlReader.Create(path))
The Location property will do the following for you:
Gets the full path or UNC location of the loaded file that contains the manifest.
One thing to note here is that if you added a shortcut to the Desktop and set the Working Directory, before changing the code, you would find the application runs fine. Do that first to verify the fix worked.

Get access to program's own directory

this is a very simple issue.
Note: I am sure people have found and posted this same issue somewhere but I can't figure out the correct search terms to find it.
Okay, so here is my issue.
Let's say my program is stored at C:\Program Files (x86)\MyProgram\Program.exe.
Now in the program, it basically does
Directory.CreateDirectory(Application.StartUpPath + "\\Files")
So basically, this would create a directory called Files in the same folder as the program itself.
Assume that I have to create the folder in that location, so using a different location is not an option.
So the real problem is, if its located in the c:\Program Files directory, my program gets "access denied" when I try to create the folder.
So how can I get something like this to work without forcing the user to run it as an admin?
If it's in Windows 7, if UAC is elevate, you won't be able to modify anything in c:\Program Files without rooting yourself via 'run as administrator'.
And since windows is a multi-user operating system, storing anything user-specific there is a recipe for disaster.
The right place for your program to put its data is in the appropriate special folder, which you can get/create via either
// user-specific application data is stored here
string userSpecificAppDataDirectory = Environment.GetFolderPath(
SpecialFolder.ApplicationData ,
SpecialFolderOption.Create
) ;
// application data common to all users is stored here
string commonAppDataDirectory = Environment.GetFolderPath(
SpecialFolder.CommonApplicationData ,
SpecialFolderOption.Create
) ;
or one of the other Environment.GetFolderPath() overloads.
In modern operating system the folder C:\program files (x86) is write protected by the OS. You can't create sub folders here without using an administrative account (and also in that case you will be asked to confirm this action unless you disable UAC). So the correct way to follow is to create your data folder in another place. The best option is the CommonApplicationData folder extracted using:
Environment.GetFolderPath(Environment.SpecialFolder.CommonApplicationData)
or the SpecialFolder.ApplicationData enum if your data should be differentiated by the current user of the application, or the SpecialFolder.MyDocuments if these files are produced by your user and need to be opened freely by other programs (or need to be included in a backup)
After you get the special folder provided by the OS to store application data remember to create a subfolder for your application and the other subfolders as required by your requirements
// In Win7 this usually resolves to C:\ProgramData, but do not use this folder
string appCommon = Environment.GetFolderPath(Environment.SpecialFolder.CommonApplicationData);
// This resolves to C:\programdata\your_app_name\files
string appData = Path.Combine(appCommon, "your_app_name", "files");
// This will create all directories in the specified path one by one....
if(!Directory.Exists(appData)) Directory.CreateDirectory(appData);
You could try creating any files or folders you need during your installation procedure. I am not sure what success you would find if using a third party install creator, but my understanding is that items added via the Application Files... button in the Publish tab of the Project Properties section in Visual Studio then have access privileges kind of inherently granted for use by the application.

Finding Install path of a program

I am new to C# and I have made a simple Windows Forms Application that basically updates the persons files for a game.
They have to manually move and delete certain folders just to change version every time. I have successfully accomplished this.
However before I start giving it out I really should improve it. I know I need to change the name of the processes and remove my descriptions ETC.
I have stumbled onto an error and instead of me taking a guess I think it is best to get an opinion from a more experienced person about how to do this.
I am going to use Inno Setup to make the installer for my application, this way I can be sure it will go into their program files 32 and 64 bit. So I know this will be in program files.
So now I am wondering if I have done this the correct way or not? I was using this format to find their program files:
string programFilesFolder = Environment.GetEnvironmentVariable("PROGRAMFILES(X86)") ?? Environment.GetFolderPath(Environment.SpecialFolder.ProgramFiles);
However, would this work on all windows systems(XP, Vista, Win7, Win8) and is it completely accurate? I was going to use the above, and then use this:
string PATCHSELECTOR = Path.Combine(programFiles, #"PATCH SELECTOR");
if (Directory.Exists(PATCHSELECTOR))
{
string GamereliteFolder = Path.Combine(programFiles, #"GAMERELITE~1");
if (Directory.Exists(GamereliteFolder))
And then I move the files using the string method. If the file exists it is deleted before I copy the file over from PATCH SELECTOR to GAMERELITE.
Also will windows XP support using the .exe with an assembly resource embedded which is making the program need to be ran as administrator? I previously was making the assembly work through UAC however that wouldnt always work if they have UAC off or if it is XP so I thought I would try the admin assembly instead.
Can anyone possibly give me some insight, ideas or links?
For executables (not sure for websites & web application) this returns the directory where the executable lives (it's actually the base path where the framework will probe for Assemblies to load, 99% of the the that's the same thing).
System.AppDomain.CurrentDomain.BaseDirectory
This method works for any executable located in a folder which is defined in the windows PATH variable:
private string LocateEXE(String fileName)
{
string path = Environment.GetEnvironmentVariable("path");
string[] folders = path.Split(';');
foreach (var folder in folders)
{
if (File.Exists(Path.Combine(folder, fileName)))
{
return Path.Combine(folder, fileName);
}
}
return String.Empty;
}
Usage:
string pathToEXE = LocateEXE("Example.exe");
Reference:
how to find the execution path of a installed software
How can I get another application's installation path programmatically?
Couple things:
Among the already stated answers, Assembly.GetExecutingAssembly().Location will also give you the full file path of the currently "executing" Assembly. (Alternatively, GetCurrentAssembly)
If I'm reading your question correctly, you're trying to find both your own location as well as another application's. I would highly recommend seeing if the other application has a registry key that specifies the exact location - it'll make your copy step WAY more stable.

Using WritePrivateProfileString to write path issue

I am using WritePrivateProfileString in c# (through DllImport) to store paths taken from textboxes on the interface. And the .ini file name is hardcoded in my application
string ini_file = ".\\config.ini";
However, when the file writing happens, the configuration file is written to the first path taken from the interface instead of writing it to the exe directory. Which is quite odd.
Debugging shows that the values are sent correctly to the WritePrivateProfileString but it still is written to the wrong location. Anyone knows why is that happenening?
I'd guess that something is changing the working directory of your process, most likely your code in the process. Note that the documentation has this to say:
If the lpFileName parameter does not contain a full path and file name for the file, WritePrivateProfileString searches the Windows directory for the file. If the file does not exist, this function creates the file in the Windows directory.
Now my guess is that this applies if you supply just a file name. Because your file name starts with . I believe that will force the function to start from the current working directory.
Having said all of that, and no matter what the cause of the problem is, you should use a fully-qualified path in order to make sure the file is written where you want it to be written. Whenever you want the file to go in a specific directory, it's always easiest to force that by using fully-qualified paths.
You can find the path to your executable using Application.ExecutablePath and then remove the file name part.
Another point to make is that the same directory as the executable may be a bad choice. If your program is installed under the Program Files directory then the directory which contains the executable will not be generally writeable. I think you should consider using a directory under in the user profile. Look for one of the Environment.SpecialFolder values.
Further to David Heffernan's answer - you can use
Path.GetDirectoryName(Application.ExecutablePath);
to safely get just the running application's folder part.
If you're in a dll rather than an executable, you can use
Path.GetDirectoryName(Assembly.GetAssembly(typeof(MyClass)).CodeBase);
Both require System.IO, and were originally posted here. Second example also requires System.Reflection).
Application data files are supposed to be written to the LocalApplicationData special folder.
string path = System.Environment.GetFolderPath(System.Environment.SpecialFolder.LocalApplicationData);
You typically will not have permissions to write into the Program Files folder etc.

Quick Question: How can I make sure the current directory is not changed because of OpenFileDialog?

say my application is installed in C:\programfiles\xyz\ I've some setting & other data files (*.dat files) in this directory too.
My application uses OpenFileDialog to open an image. Problem is that when ever user browses to some directory (say MyPictures) for an image. The current working directory of the application becomes that directory (MyPictures in this case).
After user inputs the image. I do some processing over it and save some values to imagedata.dat which will be located in the path where original application is installed.(C:\programfiles\xyz here )
In my code I'm just using FileStream("imagedata.dat",...,...) without any path prefix before the filename. Problem here is that application is crashing because it is searching for imagedata.dat in 'MyPictures\imagedata.dat'.
How can I avoid this?
You should be using absolute path names when saving data to files. The current working directory is controlled by the user, not by you (for example, if they launch your process from a shortcut then the working directory could've been changed before your process even starts up).
Also, you should never save anything under C:\Program Files during normal use. Doing this means your program needs to be running as an administrator, and unless you're doing administrator-y things then you should be able to run it as a regular user.
The correct thing to do in your case is to use the Environment.GetFolderPath() function to get the location of the ApplicationData folder and save your data under there. Just choose a sub-directory based on your application's name.
You could save it to GetCurrentDirectory then restore with SetCurrentDirectory. However, I agree wih codeka that using the appropriate GetFolderPath (probably ApplicationData, CommonApplicationData or LocalApplicationData) is a better solution.

Categories