I have an xml and I want to append an attribute to each element in xml file.
IEnumerable<XElement> childList = from el in xml.Elements()
select el;
textBox1.Text = childList.ToString();
foreach (XElement el in childList)
{
el.Add(new XAttribute("Liczba_Potomkow", "dziesiec"));
textBox1.Text = el.ToString();
xml.Save("Employees.xml");
}
unfortunately, when I open the file only the first line seems to be affected. (only first elements gets new attribute). Why is so ?
I assume xml is an XDocument? If so, you're calling Elements() directly on the parent of the root element - so the only element it finds will be the root element itself.
If you want to do something for all elements in the document, you should use the Descendants() method.
Additionally, your query expression is pointless - you might as well just use xml.Elements() - and I really don't think you should be saving in a loop.
I think you just want:
foreach (var element in xml.Descendants())
{
element.Add(new XAttribute("Liczba_Potomkow", "dziesiec"));
}
xml.Save("Employees.xml");
Related
I have xml as follows:
<Reports>
<report>
<name>By Book</name>
<report_type>book</report_type>
<Object>Count Change</Object>
<Slicers detail="detail">
<Namespace>EOD</Namespace>
<BookNode>HighLevel</BookNode>
<DateFrom>T-2</DateFrom>
<DateTo>T-1</DateTo>
<System>NewSystem</System>
</Slicers>
</report>
</Reports>
I simply want to loop through the value of each element of the Xdocument (pref would be any element under Slicers) but to start with just all elements.
When I run the following:
var slicers = from c in config.Elements("Reports")
select c.Value ;
foreach (var xe in slicers)
{
Console.WriteLine(xe);
}
The output is a single line concatenating all the values together.
"By BookbookCount ChangeEODHighLevelT-2T-1NewSystem"
I want to loop through them one at a time, 'By Book' first, run some code then book etc etc.
I am sure this is simple, but cant get round it. I have tried foreach(Xelement in query) but same resulst
i would do it something like this;
XmlDocument doc = new XmlDocument();
doc.LoadXml(xml);
//load in your xml here
XmlNodeList xnList = doc.SelectNodes("nodeYou'reLookingFor");
//for getting just the splicers you could do "Reports/report/Slicers"
foreach (XmlNode node in xnList)
string namespace = node["Namespace"].InnerText;
//go through all your nodes here
you're creating a xmldoc, loading your xml into it, creating a list which holds each node in the list (at a specified Xpath), and then looping through each. in the loop you can do whatever you want by referencing
node["nodenamehere"].InnerText
I'm trying to traverse an XML document and select certain node attributes. The XML is dynamically generated.
<?xml version="1.0" encoding="ISO-8859-1"?>
<streams>
<stream>
<title>+23 (Panama)</title>
<info resolution="768x420" bitrate="1000kbps"/> ----- Need These
<swfUrl>http://www.freeetv.com/script/mediaplayer/player.swf</swfUrl>
<link>rtmp://200.75.216.156/live/</link>
<pageUrl>http://www.freeetv.com/</pageUrl>
<playpath>livestream</playpath>
<language>Music</language>
<advanced></advanced>
</stream>
</streams>
The code that I'm trying to use with zero luck and Visual Studio saying "No you're wrong. Try 600 more times" is
xDoc.Load("http://127.0.0.1/www/xml.php");
XmlNodeList nodes = xDoc.SelectNodes("/streams/stream");
foreach (XmlNode xn in nodes)
{
ListViewItem lvi = listView1.Items.Add(xn["title"].InnerText);
lvi.SubItems.Add(xn["swfUrl"].InnerText);
lvi.SubItems.Add(xn["link"].InnerText);
lvi.SubItems.Add(xn["pageUrl"].InnerText);
lvi.SubItems.Add(xn["playpath"].InnerText);
lvi.SubItems.Add(xn["language"].InnerText);
lvi.SubItems.Add(xn["advanced"].InnerText);
lvi.SubItems.Add(xn["//info/#resolution"].Value);
}
Please tell me oh wise ones what am I doing wrong?
If you want to select node's attribute using XPath you should use SelectSingleNode method, e.g.:
xn.SelectSingleNode("info/#resolution").Value
To select resolution attribute of your last node you need to use:
xn["info"].Attributes["resolution"].Value
Alternatively, you can try LINQ to XML for the same results (I find its API easier to use):
var doc = XDocument.Parse("http://127.0.0.1/www/xml.php");
foreach (var d in doc.Descendants("stream"))
{
ListViewItem lvi = listView1.Items.Add(d.Element("title").Value);
lvi.SubItems.Add(d.Element("swfUrl").Value);
// ...
vi.SubItems.Add(d.Element("info").Attribute("resolution").Value);
}
Here is an example of LINQ to XML to extract attributes from the entire document of a particular attribute name OR list of attribute names.
var xml = XElement.Parse("http://127.0.0.1/www/xml.php");
// find all attributes of a given name
var attributes = xml
.Descendants()
.Attributes("AttributeName")
// find all attributes of multiple names
var attributes = xml
.Descendants()
.Attributes()
.Where(a => ListOfAttribNames.Contains(a.Name.LocalName))
Replace:
lvi.SubItems.Add(xn["//info/#resolution"].Value);
with:
lvi.SubItems.Add(xn.SelectSingleNode("info/#resolution").Value);
I have a simple XML
<AllBands>
<Band>
<Beatles ID="1234" started="1962">greatest Band<![CDATA[lalala]]></Beatles>
<Last>1</Last>
<Salary>2</Salary>
</Band>
<Band>
<Doors ID="222" started="1968">regular Band<![CDATA[lalala]]></Doors>
<Last>1</Last>
<Salary>2</Salary>
</Band>
</AllBands>
However ,
when I want to reach the "Doors band" and to change its ID :
using (var stream = new StringReader(result))
{
XDocument xmlFile = XDocument.Load(stream);
var query = from c in xmlFile.Elements("Band")
select c;
...
query has no results
But
If I write xmlFile.Elements().Elements("Band") so it Does find it.
What is the problem ?
Is the full path from the Root needed ?
And if so , Why did it work without specify AllBands ?
Does the XDocument Navigation require me to know the full level structure down to the required element ?
Elements() will only check direct children - which in the first case is the root element, in the second case children of the root element, hence you get a match in the second case. If you just want any matching descendant use Descendants() instead:
var query = from c in xmlFile.Descendants("Band") select c;
Also I would suggest you re-structure your Xml: The band name should be an attribute or element value, not the element name itself - this makes querying (and schema validation for that matter) much harder, i.e. something like this:
<Band>
<BandProperties Name ="Doors" ID="222" started="1968" />
<Description>regular Band<![CDATA[lalala]]></Description>
<Last>1</Last>
<Salary>2</Salary>
</Band>
You can do it this way:
xml.Descendants().SingleOrDefault(p => p.Name.LocalName == "Name of the node to find")
where xml is a XDocument.
Be aware that the property Name returns an object that has a LocalName and a Namespace. That's why you have to use Name.LocalName if you want to compare by name.
You should use Root to refer to the root element:
xmlFile.Root.Elements("Band")
If you want to find elements anywhere in the document use Descendants instead:
xmlFile.Descendants("Band")
The problem is that Elements only takes the direct child elements of whatever you call it on. If you want all descendants, use the Descendants method:
var query = from c in xmlFile.Descendants("Band")
My experience when working with large & complicated XML files is that sometimes neither Elements nor Descendants seem to work in retrieving a specific Element (and I still do not know why).
In such cases, I found that a much safer option is to manually search for the Element, as described by the following MSDN post:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/3d457c3b-292c-49e1-9fd4-9b6a950f9010/how-to-get-tag-name-of-xml-by-using-xdocument?forum=csharpgeneral
In short, you can create a GetElement function:
private XElement GetElement(XDocument doc,string elementName)
{
foreach (XNode node in doc.DescendantNodes())
{
if (node is XElement)
{
XElement element = (XElement)node;
if (element.Name.LocalName.Equals(elementName))
return element;
}
}
return null;
}
Which you can then call like this:
XElement element = GetElement(doc,"Band");
Note that this will return null if no matching element is found.
The Elements() method returns an IEnumerable<XElement> containing all child elements of the current node. For an XDocument, that collection only contains the Root element. Therefore the following is required:
var query = from c in xmlFile.Root.Elements("Band")
select c;
Sebastian's answer was the only answer that worked for me while examining a xaml document. If, like me, you'd like a list of all the elements then the method would look a lot like Sebastian's answer above but just returning a list...
private static List<XElement> GetElements(XDocument doc, string elementName)
{
List<XElement> elements = new List<XElement>();
foreach (XNode node in doc.DescendantNodes())
{
if (node is XElement)
{
XElement element = (XElement)node;
if (element.Name.LocalName.Equals(elementName))
elements.Add(element);
}
}
return elements;
}
Call it thus:
var elements = GetElements(xamlFile, "Band");
or in the case of my xaml doc where I wanted all the TextBlocks, call it thus:
var elements = GetElements(xamlFile, "TextBlock");
How to get a value of XElement without getting child elements?
An example:
<?xml version="1.0" ?>
<someNode>
someValue
<child>1</child>
<child>2</child>
</someNode>
If i use XElement.Value for <someNode> I get "somevalue<child>1</child><child>2<child>" string but I want to get only "somevalue" without "<child>1</child><child>2<child>" substring.
You can do it slightly more simply than using Descendants - the Nodes method only returns the direct child nodes:
XElement element = XElement.Parse(
#"<someNode>somevalue<child>1</child><child>2</child></someNode>");
var firstTextValue = element.Nodes().OfType<XText>().First().Value;
Note that this will work even in the case where the child elements came before the text node, like this:
XElement element = XElement.Parse(
#"<someNode><child>1</child><child>2</child>some value</someNode>");
var firstTextValue = element.Nodes().OfType<XText>().First().Value;
There is no direct way. You'll have to iterate and select. For instance:
var doc = XDocument.Parse(
#"<someNode>somevalue<child>1</child><child>2</child></someNode>");
var textNodes = from node in doc.DescendantNodes()
where node is XText
select (XText)node;
foreach (var textNode in textNodes)
{
Console.WriteLine(textNode.Value);
}
I think what you want would be the first descendant node, so something like:
var value = XElement.Descendents.First().Value;
Where XElement is the element representing your <someNode> element.
You can specifically ask for the first text element (which is "somevalue"), so you could also do:
var value = XElement.Descendents.OfType<XText>().First().Value;
I would like to traverse every element and attribute in an xml and grab the name an value without knowing the names of the elements in advance. I even have a book on linq to xml with C# and it only tells me how to query to get the value of elements when I already know the name of the element.
The code below only gives me the most high level element information. I need to also reach all of the descending elements.
XElement reportElements = null;
reportElements = XElement.Load(filePathName.ToString());
foreach (XElement xe in reportElements.Elements())
{
MessageBox.Show(xe.ToString());
}
Elements only walks one level; Descendants walks the entire DOM for elements, and you can then (per-element) check the attributes:
foreach (var el in doc.Descendants()) {
Console.WriteLine(el.Name);
foreach (var attrib in el.Attributes()) {
Console.WriteLine("> " + attrib.Name + " = " + attrib.Value);
}
}
You should try:
reportElements.Descendants()