We Keep Coding

How to compare characters in C#

I'm trying to compare two characters in C#. The "==" operator does not work for strings, you have to use the .Equals() method. In the following code example I want to read each character in the input string, and output another string without spaces.
string inputName, outputName = null;
// read input name from file
foreach (char indexChar in inputName)
{
if (!indexChar.Equals(" "))
outputName += indexChar;
}
This does not work, the comparison always equals false, even when the input name has embedded spaces. I also tried using the overload method Equals(string, string), which did not work either. I'm assuming C# treats char variables as a string of length 1. Microsoft's documentation doesn't seem to mention comparing characters. Does anyone have a better method for comparing characters in a string?

" " is a string of length one; a char and a string never match; you want ' ', the space character:
if (indexChar != ' ')
However, if you're just trying to remove all spaces, it is probably easier to just do:
var outputName = inputName.Replace(" ", "");
This avoids allocating lots of intermediate strings.
Note also that the space character isn't the only whitespace character in unicode. If you need to deal with all whitespace characters, a regex may be a better option:
var outputName = Regex.Replace(inputName, #"\s", "");

You can use .CompareTo(char) to compare characters.
Example :
if('Z'.CompareTo('Z') == 0)
Console.WriteLine("Same character !");

Thanks for all the great suggestions. inputName.CompareTo(" ") is not the way to go for this example, you would still have to have a loop. I ended up using:
var outputName = Regex.Replace(inputName, #"\s", "")
which works, and it's only one line of code!

C# How may i replace \" with "

I am trying to replace \" in a string with ", how may i do that?
I've tried using replace but i could not find a way to do it.
Ex:
string line = "This is a \"sample\" "
string replaced = "This is a "sample" ".
Thanks.

Because quotes are used to start and end strings (they are a type of control character), you can't have a quote in the middle of a string because it would terminate the string
string replaced = "This is a "sample" ";
/*
You can see from the syntax highlighting (red) that the string is being
detected as <This is a > and <sample> is black meaning it is detected as
code (and will cause a syntax error)
*/
In order to put a quote in the middle of the string we escape it (escaping means to treat it as a character literal instead of a control character) using the escape character, which in C# is backslash.
string line = "This is a \"sample\"";
Console.WriteLine(line);
// Output: This is a "sample"
string literalLine = #"This is a ""sample""";
Console.WriteLine(literalLine);
// Output: This is a "sample"
The # symbol in C# means I want this to be a literal string (ignore control characters), however quotes still start and end strings so in order to print a quote in a literal string you write two of them "" (that's how the language is designed)

Case 1: If the value within the variable line is actually This is a \"sample\", then you could do line.Replace("\\\"", "\"").
If not:
\" is an escape sequence. it shows up as \" in the code, however when it compiles it would show up as " instead of the original \".
The reason for escaping quotes is because the compiler cannot identify whether the quote is within another quote or not. Let's see your example:
"This is a "sample" "
is this This is a as one group, then an unknown token sample, then another quote ? or This is a "sample" all within a quote? We can take a guess by looking at the context, but compiler cannot. Hence, we use escape sequence to tell the compiler "I used this double quote character as a character, not the closing/opening of a string literal."
See Also: https://en.wikipedia.org/wiki/Escape_sequences_in_C

You may try something like this:
String str = "This is a \"sample\" ";
Console.WriteLine("Original string: {0}", str);
Console.WriteLine("Replaced: {0}", str.Replace('\"', '"'));

Desired output : This is a sample
Given string : "This is a \"sample\""
The problem: you have escape characters protecting the double quotes from being interpreted. the \ escape character is an instruction to use a quotation mark literally instead of using it to indicate a break in the string. This means the actual string value is "This is a "sample"" when served as output.
The answer removing the \ may work, but it makes for smelly code because removing an escape character in this way can make it unclear what you intend and prevents you from escaping any character.
Removing the " might work, though it prevents use of any quotes and some IDEs might leave the escape character behind to ruin your day.
We want one specific target, the quotes around "sample".
string sample = "This is a \"sample\"";
List<string> sampleArray = sample.Split(' ').ToList(); // samplearray is now split into ["This", "is", "a", "\"sample\""]
var x = sampleArray.FirstOrDefault(t => t == "\"sample\""); //isolate our needed value
if (x != null) //prevent a null reference in case something went wrong and samplearray wasnt as expected
{
var index = sampleArray.IndexOf(x); //get the location of the value we just picked
x = x.Replace("\"", string.Empty); //replace chars
sampleArray[index] = x; //assign new value to the list
}
return String.Join(" ", sampleArray); //return the string joined together with spaces.

Try this:
string line="This is a \"sample\" " ;
replaced =line.Replace(#"\", "");

Replace Unicode character "�" with a space

I'm a doing an massive uploading of information from a .csv file and I need replace this character non ASCII "�" for a normal space, " ".
The character "�" corresponds to "\uFFFD" for C, C++, and Java, which it seems that it is called REPLACEMENT CHARACTER. There are others, such as spaces type like U+FEFF, U+205F, U+200B, U+180E, and U+202F in the C# official documentation.
I'm trying do the replace this way:
public string Errors = "";
public void test(){
string textFromCsvCell = "";
string validCharacters = "^[0-9A-Za-z().:%-/ ]+$";
textFromCsvCell = "This is my text from csv file"; //All spaces aren't normal space " "
string cleaned = textFromCsvCell.Replace("\uFFFD", "\"")
if (Regex.IsMatch(cleaned, validCharacters ))
//All code for insert
else
Errors=cleaned;
//print Errors
}
The test method shows me this text:
"This is my�texto from csv file"
I try some solutions too:
Trying solution 1: Using Trim
Regex.Replace(value.Trim(), #"[^\S\r\n]+", " ");
Try solution 2: Using Replace
System.Text.RegularExpressions.Regex.Replace(str, #"\s+", " ");
Try solution 3: Using Trim
String.Trim(new char[]{'\uFEFF', '\u200B'});
Try solution 4: Add [\S\r\n] to validCharacters
string validCharacters = "^[\S\r\n0-9A-Za-z().:%-/ ]+$";
Nothing works.
How can I replace it?
Sources:
Unicode Character 'REPLACEMENT CHARACTER' (U+FFFD)
Trying to replace all white space with a single space
Strip the byte order mark from string in C#
Remove extra whitespaces, but keep new lines using a regular expression in C#
EDITED
This is the original string:
"SYSTEM OF MONITORING CONTINUES OF GLUCOSE"
in 0x... notation
SYSTEM OF0xA0MONITORING CONTINUES OF GLUCOSE
Solution
Go to the Unicode code converter. Look at the conversions and do the replace.
In my case, I do a simple replace:
string value = "SYSTEM OF MONITORING CONTINUES OF GLUCOSE";
//value contains non-breaking whitespace
//value is "SYSTEM OF�MONITORING CONTINUES OF GLUCOSE"
string cleaned = "";
string pattern = #"[^\u0000-\u007F]+";
string replacement = " ";
Regex rgx = new Regex(pattern);
cleaned = rgx.Replace(value, replacement);
if (Regex.IsMatch(cleaned,"^[0-9A-Za-z().:<>%-/ ]+$"){
//all code for insert
else
//Error messages
This expression represents all possible spaces: space, tab, page break, line break and carriage return
[ \f\n\r\t\v​\u00a0\u1680​\u180e\u2000​\u2001\u2002​\u2003\u2004​\u2005\u2006​\u2007\u2008​\u2009\u200a​\u2028\u2029​​\u202f\u205f​\u3000]
References
Regular expressions (MDN)

Using String.Replace:
Use a simple String.Replace().
I've assumed that the only characters you want to remove are the ones you've mentioned in the question: � and you want to replace them by a normal space.
string text = "imp�ortant";
string cleaned = text.Replace('\u00ef', ' ')
.Replace('\u00bf', ' ')
.Replace('\u00bd', ' ');
// Returns 'imp ortant'
Or using Regex.Replace:
string cleaned = Regex.Replace(text, "[\u00ef\u00bf\u00bd]", " ");
// Returns 'imp ortant'
Try it out: Dotnet Fiddle

Define a range of ASCII characters, and replace anything that is not within that range.
We want to find only Unicode characters, so we will match on a Unicode character and replace.
Regex.Replace("This is my te\uFFFDxt from csv file", #"[^\u0000-\u007F]+", " ")
The above pattern will match anything that is not ^ in the set [ ] of this range \u0000-\u007F (ASCII characters (everything past \u007F is Unicode)) and replace it with a space.
Result
This is my te xt from csv file
You can adjust the range provided \u0000-\u007F as needed to expand the range of allowed characters to suit your needs.

If you just want ASCII then try the following:
var ascii = new ASCIIEncoding();
byte[] encodedBytes = ascii.GetBytes(text);
var cleaned = ascii.GetString(encodedBytes).Replace("?", " ");

conversion of special character string

i am using a web service and result is coming like this
" methew wade watto"
then I've tried with string.replace():
jsona = jsona.Replace(#"", "");
but the problem is i am unable to replace special character's like " this in my replace statement, How can I replace " from the input string? and what are the other options of replacing the string other then this?

In c#, The # symbol means to read that string literally, and don't
interpret control characters otherwise. whereas \ followed by a
character that is not recognized as an escaped character, matches that
character.
So you have to use \" to represent " in .Replace() instead for #
I think you have to try something like this:
string jsonInput = "\"methew wade watto\""; // be the input
string replacedQuotes = jsonInput.Replace("\"", "");
Working example

You need to escape the " with \ , right now, you are just saying to replace empty string with empty string:
jsona= jsona.Replace("\"","");
Now this will replace the " sign in your string with empty string.
Output:
methew wade watto

Use a backslash to determine special character
string = string.Replace("\"", "");

String Manipulation using C#

Using C# we can do string check like if string.contains() method, e.g.:
string test = "Microsoft";
if (test.Contains("i"))
test = test.Replace("i","a");
This is fine. But what if I want to replace a string which contains " symbol to be replaced.
I want to achieve this:
"<html><head>
I want to remove the " symbol present in check so that the result would be:
<html><head>

The " character can also be replaced, just like any other:
test = test.Replace("\"","");
Also, note that you don't have to test if the character exists : your test.Contains("i") could be removed since the .Replace() method won't do anything (no replace, no error thrown) if the character doesn't exist inside the string.

To include a quote symbol in a string, you need to escape it, using a backslash. In your example, you want to use something lik this:
if (test.Contains("\""))

There are two ways to include a '"' character in a string literal. All the answers so far have used the c-style way:
var quotation = "Parting is such sweet sorrow";
var howSweetIsIt = quotation + " that I shall say \"good-night\" till it be morrow.";
In some contexts (especially for users experienced with Visual Basic), the verbatim string literal may be easier to read. A verbatim string literal begins with an # sign, and the only character that requires escaping is the quotation mark -- all other characters are included verbatim (hence the name). Significantly, the method of escaping the quotation mark is different: rather than preceding it with a backslash, it must be doubled:
var howSweetIsIt = quotation + " that I shall say ""good-night"" till it be morrow.";

string SymbolString = "Micro\"so\"ft";
The string above use scape char \ to insert " between the characters
string Result = SymbolString.Replace("\"", string.Empty);
With the following replace I replace the character "" for empty.
This is what you try to achieve?

if (check.Contains("\"")
output = check.Replace("\"", "");

output = check.Replace("\"", "");
Just remember to use "\"" for the quote sign as the backslash is an escape character.

if (str.Contains("\""))
{
str = str.Replace("\"", "");
}