I am trying to connect to a Domino Session which works fine when testing in isolation, however as soon as I put it in a thread I run into problems.
This works fine when I put in a Unit test, so I know I can connect to the server fine.
NotesSession session = new NotesSession();
string DominoPassword = Helpers.GetConfigSetting("DominoPassword");
session.Initialize(DominoPassword);
However when I put this in a thread (want to be able to connect to Domino several times) I
get the following error
"{Unable to evaluate expression because the code is optimized or a native frame is on top of the call stack.}"
A couple of years ago I definitely got farther than this with testing of multi-threaded Domino Interop in C#. I don't recall seeing that error. It might be due to a difference between our respective dev/test environments. It's long enough ago, though, that I don't recall what my environments were when I ran my tests.
But whether or not the Domino objects are thread-safe remains an open question. See here. As far as I know, IBM has never said that they are. (Also, last time I checked, IBM said that the classes are not supported on Win64 platforms even in Win32 applications, so that might be entering into your problem.
Related
I apologize for the length of the question, but I believe it is difficult to understand the “why” without the background.
Background: I have two applications running in a Windows Embedded Standard 7 environment. They should be the only two applications running on the machine. One, called “Controller”, is written in C++ the other, “DBconnector”, is written in c#. This is not new code. It has been in active use and development for almost 20 years.
The purpose of the software is to run a manufacturing machine for producing parts. These machines are big and dangerous if the program crashes. Long ago, I discovered that if the network went down for some reason, all the threads in the application would stall – not just the network thread. This was disastrous since leaving the controller in a state with the wrong relays on in extremely rare circumstances could cause the machine to literally explode. Note: Several things have been added to the software and hardware to prevent this now. While this danger doesn’t really exist anymore, stability is still extremely important. I never want the operator to be stuck in a state where they can’t hit the reset button. My solution at the time was to move the networking tasks into a separate application. The OS was windows XP based at the time. I have no idea if the problem still exists in windows 10 since I really don’t want to rewrite hundreds of thousands of lines of code to try and merge the two programs now.
The development of the two programs diverged such that the one that controlled the machine, Controller, was designed for extreme stability and the other, DBconnector, was where dangerous things like networking and most file I/O happened. Communication between the two programs is facilitated using a memory mapped file that they both can access. I have no problem sharing window handles or process id’s or any other data that might be needed between the two programs.
Here is my question. How can I make the Controller application display the GUI of DBconnector? For example, I have started to add functionality to Controller that requires DBconnector to display the quality control sheets that are held on a web site on company servers. I want for an operator to be able to pull up the quality control sheet directly on the machine. The operator currently only interacts with the Controller application. I don’t want Controller to be able to access the network. Also, C# has some tools to make displaying a web page easy. It seems to me that the place to do this is DBconnector. The problem is that DBconnector runs in the background and cannot currently be seen or accessed by a user. So, the question is how to solve this.
First option I have tried is to tell DBconnector to come forward and put Controller in the background. Then, when the user is done, Controller comes back to the front. I have made this to work using some hacks, but it is inconsistent. The trick I used was to minimize and then maximize DBconnector which seems to bring it to the front most of the time and try to hold focus on one or the other. There still might be a way to do it this way, but it needs to be something that is consistent.
The second option is to run the DBconnector application inside of one of Controller’s windows. I have no idea how to do this. I thought about using ATL or COM, but I think these run as threads within Controllers process rather than as a separate application.
The third option I’ve considered is to create a window inside Controller that intercepts and passes all user input messages directly to Dbconnector using a windows message handle and takes a screenshot of DBconnector whenever the it is invalidated and passes it through the memory mapped file. Currently, this is what I am swaying towards.
Are there any suggestions on how to do the first and last option better, or how to do the second option at all, or another solution that I have missed? Keep in mind that our current hardware is running Windows Embedded Standard 7. The project is currently in visual studio 2015. The C++ window technology is MFC implemented using libraries originally from around 2003 I think. DBconnector is in .NET framework 4 in C#.
We run a Windows Forms application developed in C# in our company, and one problem is giving us headaches.
When we run the application from a local machine, in drive C:, for example, the application loads and runs fast. It's heavily database-based, which means it does a lot of queries to our MSSQL server, and it runs all queries in less than 1 second, while running from a local drive.
If we run the same application from a mapped network drive (not a UNC path, a M: mapped drive), it loads fast, but the queries takes ages to complete, and hardly we can see the result.
ClickOnce is not an option for us (due to reasons that are not subject to discussion here), and we have several other 3rd party applications that runs fast, loaded from the same mapped M: drive.
I did some research, and the closest question I could find is this one:
http://stackoverflow.duapp.com/questions/2554716/my-c-net-application-is-running-slower-when-the-exe-is-located-on-the-network
When I right-click the application there's no "unblock" option available, which tells me that there's no secondary stream attached to the file and it's "trusted" by the machine.
Also, I tried adding <loadFromRemoteSources enabled="true"/> in the .config file, but it caused no changes in the application performance so far.
The application is not signed, and the slowness happens with both debug and release versions of the application.
What are we doing wrong ?
PS: I'm still trying to pinpoint the exact command that's taking longer to work, but no luck so far.
EDIT: Adding new information. It seems that the problem wasn't the network "per se", but the fact that the application was doing a background task and failing because it was running from the network. This failure wasn't wrapped around a try-catch block, and was preventing the background task to return properly, creating a major delay on the application response.
That means it was our development bug, not Windows fault. Thanks for the answers, I'll vote to close this question.
I have recently found one scenario where exactly this was happening in .net winforms sql-server application.
On one machine, the application was lightning-fast, on another one, queries took seconds.
Second machine was configured to use VPN dialed via PPTP. The VPN was automatically reconnecting whenever the computer got online – even if the machine was in company network (where no VPN was needed). VPN auto-redial trick always seemed to be very useful... until I found that connection to the SQL server basically always went through the VPN because of this. Manually disconnecting the VPN instantly helped: responses got fast again.
I do not say this is definite solution in your case but this is one of things what causes almost unacceptable slowness of queries. I observed this first hand.
I have a large-ish Winforms application written in C# which is periodically unresponsive. The issue seems to occur once the application has been use for an hour or so. Exact timings are difficult to gather as users often go off to work on something selse, get back to it and find it has become unresponsive.
I think a memory leak can be ruled out as I'm not seeing excessive memory usage (I've asked users to send a screenshot of the task manager and memory usagage is the same as I would see when the application is runnning normally)
Similarly, CPU usage is normal (single digit %)
As I've so far been unable to recreate the issue on mydevelopment PC I am planning on sitting next to one of the affected users and mirror every action the user performs in order to recreate this. (I'll be setting up a laptop to RDP in to my main PC)
Recreating the issue is one thing, but I'll need to find out what is actually going on in the application.
Could anyone tell me if running in debug mode (through visual studio) will be sufficient or will I need to do something different?
I've searched through a few posts and I've seen mention of profiling software, however I'm not sure if this would only help with general performance issues or memory management issues.
Alternatively, if anyone has come across similar freezing issues then do you have any suggestions of the kind of causes for this?
Some technical details: Aplication is C#, compiled against .NET 3.5, winforms GUI. There are a few external libraries (most significant is ComponentFactory Krypton Suite). Data access is to a Microsoft SQL Server 2005 database. The solution contains 39 projects, I'm not sure if that might have something to do with it?
Any suggestions/pointers would be greatly appreciated.
The application is working much more reliably now, freezing issues still occur on occasion but nowhere near as often as before.
The issue appears to be related to the endpoint security (in this case, Cisco Security Agent) present in the environment I'm working in, application has been whitelisted and has has significantly rediced the instances of application hangs. The development system I work on does not have this endpoint security present, so it didn't show up in early stages of testing.
Thanks for all your feedback, I think there are still threading and garbage collection issues that need cleaning up, hopefully this should sort out the last few issues.
I am experiencing the exact same issue as a user reports on eggheadcafe, but don't know what steps to take after reading the following answer.:
Two problems you should chase down:
1. Why is the website leaking resources to the finalizers. That is
bad
2. What is Oracle code waiting on -- work with Oracle's support on it
This is the issue:
I have an intermittent problem with a
web site hosted on IIS6 (w2k3 sp2).
I appears to occur randomly to users
when they click on a hyperlink within
a page. The request is sent to the
web server but a response is never
returned. If the user tries to
navigate to another hyperlink they are
not able to (i.e. the web site appears
to hang for that user). Other users
of the website at the time are not
affected by this hang and if the user
with the problem opens a new http
session (closing IE and opening the
web site again) they no longer
experience the hang.
I've placed a debugger (IISState) on
the w3wp process with the following
output. Entries with "Thread is
waiting for a lock to be released.
Looking for lock owner." look like
they might be causing the issue. Can
anyone tell what lock the process is
waiting on?
Thanks
http://www.eggheadcafe.com/software/aspnet/33799697/session-hangs.aspx
In my case my .Net C# MVC application runs against a MySQL database for data and a MS SQL database for .Net membership.
I hope someone with more knowledge of IIS can help resolve this problem.
It sounds like you have a race condition in your database calls resulting in a deadlock at the database level. You may want to look at the settings you have in your application pool for database connections. Likely you will need to put some checks in somewhere or redefine procedures in order to reduce the likelihood of the race:
http://msdn.microsoft.com/en-us/library/ms178104.aspx
I would explain the experienced hang due to session serialization. Not the part about saving/loading it from some source, but that ASP.NET does not allow the same session to execute two parallel pages simultaneously, unless they execute with a readonly-session. The later is done either in the page directive, or in web.config, by setting EnableSessionState="ReadOnly".
Your problem still exists, this wont change that the first thread hangs. I would verify that your database connections are disposed correctly. However, you never mention any Oracle database in your question (only Mysql and SQL Server). Why are you using the Oracle drivers at all? (This seems like a valid place to start debugging.)
However, as stated by David Wang in his answer in your linked question, part two of your problem is a lock that's never released. You'll need support from Oracle (or their source code) to debug this further.
IIS hang is not something surprising. IISState is out of date, and you may use Debug Diag,
http://support.microsoft.com/kb/919791 (if CPU usage is high)
http://support.microsoft.com/kb/919792 (otherwise)
The hang dumps should tell you what is the root cause.
Microsoft support can help analyze the dumps, if you are not familiar with the tricks. http://support.microsoft.com
We have a 2 x Quad Core Xeon server with 8GB of RAM and Windows Server 2003 Enterprise installed on it. We installed our application server which is based on .NET Framework 3.5 on it. The server uses SQL Server 2005 as its database server.
When we installed the application server, it used to have ultra fast performance and everything was fine. Once we joined it into our domain, its performance decreased dramatically. For example a task that took 1 sec to complete, now takes about 30 sec. This is very strange since only .NET based applications' performance got this performance hit but the other applications still run at their normal speed.
Does anyone have any idea about why is this happening? Any help or suggestion is much appreciated.
Unfortunately, more is probably needed to answer your question. There are a host of possible reasons why this is occurring, and most of them involve your code.
Based on the symptom that you joined the domain and then things started causing trouble, I'd say you've got a lot of networking that you're doing that previously was able to be done locally on your machine and the latency is now actually causing trouble.
But that's a wild guess based on not nearly enough information.
I'd suggest you profile your code. Find out where the majority of your time is spent during execution and then post the code or a sanitized version of it here so we can help you optimize it.
I did find the answer to my question so i thought it might be good to share it here. The CLR want generate publisher evidence for assemblies with authenticode signature when it tries to load the assemblies. In our case CLR was trying to connect to clr.microsoft.com but our server's internet access was blocked so it caused huge delay whenever the application server tries to load a new assembly.
The following post describes how you can disable this feature:
Bypassing the Authenticode Signature Check on Startup
I'm going to make a guess here and think that you're talking about a web application. If this is correct, you might want to take a look at the application pools you have setup on the webserver. Your application might be getting confused about which pool to set itself in when it starts running.
Another thing to check might be your data connections and make sure that you're closing everything that's been opened.
The last thing, like Randolpho said, you're just really going to have to follow your code execution with some kind of profiler and see where things are getting tied up.
Good luck!