image.save method is not save image GDI+ error occured - c#

string ServerUploadFolder = HttpContext.Current.Server.MapPath("~/Uploads/" + value.PhysicalFileName);
MultipartFormDataStreamProvider streamProvider = new MultipartFormDataStreamProvider(ServerUploadFolder);
Image img = Image.FromFile(ServerUploadFolder);
var bmp = new Bitmap(img.Width, img.Height);
using (Graphics gfx = Graphics.FromImage(bmp))
{
gfx.Clear(Color.White);
gfx.DrawImage(img, 0, 0, img.Width, img.Height);
}
bmp.RotateFlip(RotateFlipType.Rotate90FlipNone);
string imagePath = value.FileUrl.Replace(Path.GetFileName(value.FileUrl), Path.GetFileName(value.FileUrl));
bmp.Save(imagePath,img.RawFormat);
In this Save Method There are Problem Occured GDI+ Error .
I Have Tried Many Solutions but that is not worked.
I am rotate image with 90's degree and after it is rotate it is save in database.


In may case the image file already exists in system drive, so app throws the error "A Generic error occured in GDI+".
Verify that the folder must already exist where image is to be saved.
Verify that the file must not exist in the path with the same name.


The GDI+ error you're receiving is generic and could refer to any one of a number of different issues. Try the following and see how you get on:
If your image is based on a stream, ensure that it is still open when you do the Save operation. Also, make sure permissions are correct on the destination folder, i.e. that Write permission is enabled.
Finally, here's some example code which worked for me:
// Path to source file
string inputPath = Server.MapPath(#"~\Content\somefile.jpg");
// Create an image from the file
using (Image img = Bitmap.FromFile(inputPath))
{
// Rotate the image 90 degrees
img.RotateFlip(RotateFlipType.Rotate90FlipNone);
// Path to destination file
string outputPath = Server.MapPath(#"~\Content\rotated" +
System.IO.Path.GetExtension(inputPath));
// Delete the destination file if it already exists
if (System.IO.File.Exists(outputPath))
{
System.IO.File.Delete(outputPath);
}
// Save the rotated image in the same ImageFormat as the source
img.Save(outputPath, img.RawFormat);
}

Related

.NET saving screenshots results in exception "A generic error occurred in GDI+" [duplicate]

I am working on to upload and save a thumbnail copy of that image in a thumbnail folder.
I am using following link:
http://weblogs.asp.net/markmcdonnell/archive/2008/03/09/resize-image-before-uploading-to-server.aspx
but
newBMP.Save(directory + "tn_" + filename);
is causing exception "A generic error occurred in GDI+."
I have tried to give permission on folder, also tried to use a new separate bmp object when saving.
Edit:
protected void ResizeAndSave(PropBannerImage objPropBannerImage)
{
// Create a bitmap of the content of the fileUpload control in memory
Bitmap originalBMP = new Bitmap(fuImage.FileContent);
// Calculate the new image dimensions
int origWidth = originalBMP.Width;
int origHeight = originalBMP.Height;
int sngRatio = origWidth / origHeight;
int thumbWidth = 100;
int thumbHeight = thumbWidth / sngRatio;
int bannerWidth = 100;
int bannerHeight = bannerWidth / sngRatio;
// Create a new bitmap which will hold the previous resized bitmap
Bitmap thumbBMP = new Bitmap(originalBMP, thumbWidth, thumbHeight);
Bitmap bannerBMP = new Bitmap(originalBMP, bannerWidth, bannerHeight);
// Create a graphic based on the new bitmap
Graphics oGraphics = Graphics.FromImage(thumbBMP);
// Set the properties for the new graphic file
oGraphics.SmoothingMode = SmoothingMode.AntiAlias; oGraphics.InterpolationMode = InterpolationMode.HighQualityBicubic;
// Draw the new graphic based on the resized bitmap
oGraphics.DrawImage(originalBMP, 0, 0, thumbWidth, thumbHeight);
Bitmap newBitmap = new Bitmap(thumbBMP);
thumbBMP.Dispose();
thumbBMP = null;
// Save the new graphic file to the server
newBitmap.Save("~/image/thumbs/" + "t" + objPropBannerImage.ImageId, ImageFormat.Jpeg);
oGraphics = Graphics.FromImage(bannerBMP);
// Set the properties for the new graphic file
oGraphics.SmoothingMode = SmoothingMode.AntiAlias; oGraphics.InterpolationMode = InterpolationMode.HighQualityBicubic;
// Draw the new graphic based on the resized bitmap
oGraphics.DrawImage(originalBMP, 0, 0, bannerWidth, bannerHeight);
// Save the new graphic file to the server
bannerBMP.Save("~/image/" + objPropBannerImage.ImageId + ".jpg");
// Once finished with the bitmap objects, we deallocate them.
originalBMP.Dispose();
bannerBMP.Dispose();
oGraphics.Dispose();
}

When either a Bitmap object or an Image object is constructed from a
file, the file remains locked for the lifetime of the object. As a
result, you cannot change an image and save it back to the same file
where it originated.
http://support.microsoft.com/?id=814675
A generic error occurred in GDI+, JPEG Image to MemoryStream
Image.Save(..) throws a GDI+ exception because the memory stream is closed
http://alperguc.blogspot.in/2008/11/c-generic-error-occurred-in-gdi.html
EDIT:
just writing from memory...
save to an 'intermediary' memory stream, that should work
e.g. try this one - replace
Bitmap newBitmap = new Bitmap(thumbBMP);
thumbBMP.Dispose();
thumbBMP = null;
newBitmap.Save("~/image/thumbs/" + "t" + objPropBannerImage.ImageId, ImageFormat.Jpeg);
with something like:
string outputFileName = "...";
using (MemoryStream memory = new MemoryStream())
{
using (FileStream fs = new FileStream(outputFileName, FileMode.Create, FileAccess.ReadWrite))
{
thumbBMP.Save(memory, ImageFormat.Jpeg);
byte[] bytes = memory.ToArray();
fs.Write(bytes, 0, bytes.Length);
}
}

This error message is displayed if the path you pass to Bitmap.Save() is invalid (folder doesn't exist etc).

// Once finished with the bitmap objects, we deallocate them.
originalBMP.Dispose();
bannerBMP.Dispose();
oGraphics.Dispose();
This is a programming style that you'll regret sooner or later. Sooner is knocking on the door, you forgot one. You are not disposing newBitmap. Which keeps a lock on the file until the garbage collector runs. If it doesn't run then the second time you try to save to the same file you'll get the klaboom. GDI+ exceptions are too miserable to give a good diagnostic so serious head-scratching ensues. Beyond the thousands of googlable posts that mention this mistake.
Always favor using the using statement. Which never forgets to dispose an object, even if the code throws an exception.
using (var newBitmap = new Bitmap(thumbBMP)) {
newBitmap.Save("~/image/thumbs/" + "t" + objPropBannerImage.ImageId, ImageFormat.Jpeg);
}
Albeit that it is very unclear why you even create a new bitmap, saving thumbBMP should already be good enough. Anyhoo, give the rest of your disposable objects the same using love.

In my case the bitmap image file already existed in the system drive, so my app threw the error "A Generic error occured in GDI+".
Verify that the destination folder exists
Verify that there isn't already a file with the same name in the destination folder

Check your folder's permission where the image is saved
Right cLick on folder then go :
Properties > Security > Edit > Add-- select "everyone" and check Allow "Full Control"

I was facing the same issue A generic error occurred in GDI+ on saving while working on MVC app, I was getting this error because I was writing wrong path to save image, I corrected saving path and it worked fine for me.
img1.Save(Server.MapPath("/Upload/test.png", System.Drawing.Imaging.ImageFormat.Png);
--Above code need one change, as you need to put close brackets on Server.MapPath() method after writing its param.
Like this-
img1.Save(Server.MapPath("/Upload/test.png"), System.Drawing.Imaging.ImageFormat.Png);

GDI+ exceptions occured due to below points
Folder access issue
Missing properties of images
If folder issue - please provide access to application
If Missing properties then use below code
Code 1
using (Bitmap bmp = new Bitmap(webStream))
{
using (Bitmap newImage = new Bitmap(bmp))
{
newImage.Save("c:\temp\test.jpg", ImageFormat.Jpeg);
}
}
Code 2
using (Bitmap bmp = new Bitmap(webStream))
{
using (Bitmap newImage = new Bitmap(bmp))
{
newImage.SetResolution(bmp.HorizontalResolution, bmp.VerticalResolution);
Rectangle lockedRect = new Rectangle(0, 0, bmp.Width, bmp.Height);
BitmapData bmpData = newImage.LockBits(lockedRect, ImageLockMode.ReadWrite, bmp.PixelFormat);
bmpData.PixelFormat = bmp.PixelFormat;
newImage.UnlockBits(bmpData);
using (Graphics gr = Graphics.FromImage(newImage))
{
gr.SmoothingMode = SmoothingMode.HighQuality;
gr.InterpolationMode = InterpolationMode.HighQualityBicubic;
gr.PixelOffsetMode = PixelOffsetMode.HighQuality;
}
foreach (var item in bmp.PropertyItems)
{
newImage.SetPropertyItem(item);
}
newImage.Save("c:\temp\test.jpg", ImageFormat.Jpeg);
}
}
Different between code 1 and code 2
Code - 1 : it will just create image and can open it on normal image viewer
the image can't open in Photoshop
Image size will be double
Code - 2 : to open image in image edition tools use code
by using code 1 it just create images but it not assign image marks.

I always check/test these:
Does the path + filename contain illegal characters for the given filesystem?
Does the file already exist? (Bad)
Does the path already exist? (Good)
If the path is relative: am I expecting it in the right parent directory (mostly bin/Debug ;-) )?
Is the path writable for the program and as which user does it run? (Services can be tricky here!)
Does the full path really, really not contain illegal chars? (some unicode chars are close to invisible)
I never had any problems with Bitmap.Save() apart from this list.

I had a different issue with the same exception.
In short:
Make sure that the Bitmap's object Stream is not being disposed before calling .Save .
Full story:
There was a method that returned a Bitmap object, built from a MemoryStream in the following way:
private Bitmap getImage(byte[] imageBinaryData){
.
.
.
Bitmap image;
using (var stream = new MemoryStream(imageBinaryData))
{
image = new Bitmap(stream);
}
return image;
}
then someone used the returned image to save it as a file
image.Save(path);
The problem was that the original stream was already disposed when trying to save the image, throwing the GDI+ exeption.
A fix to this problem was to return the Bitmap without disposing the stream itself but the returned Bitmap object.
private Bitmap getImage(byte[] imageBinaryData){
.
.
.
Bitmap image;
var stream = new MemoryStream(imageBinaryData))
image = new Bitmap(stream);
return image;
}
then:
using (var image = getImage(binData))
{
image.Save(path);
}

I got it working using FileStream, get help from these
http://alperguc.blogspot.in/2008/11/c-generic-error-occurred-in-gdi.html
http://csharpdotnetfreak.blogspot.com/2010/02/resize-image-upload-ms-sql-database.html
System.Drawing.Image imageToBeResized = System.Drawing.Image.FromStream(fuImage.PostedFile.InputStream);
int imageHeight = imageToBeResized.Height;
int imageWidth = imageToBeResized.Width;
int maxHeight = 240;
int maxWidth = 320;
imageHeight = (imageHeight * maxWidth) / imageWidth;
imageWidth = maxWidth;
if (imageHeight > maxHeight)
{
imageWidth = (imageWidth * maxHeight) / imageHeight;
imageHeight = maxHeight;
}
Bitmap bitmap = new Bitmap(imageToBeResized, imageWidth, imageHeight);
System.IO.MemoryStream stream = new MemoryStream();
bitmap.Save(stream, System.Drawing.Imaging.ImageFormat.Jpeg);
stream.Position = 0;
byte[] image = new byte[stream.Length + 1];
stream.Read(image, 0, image.Length);
System.IO.FileStream fs
= new System.IO.FileStream(Server.MapPath("~/image/a.jpg"), System.IO.FileMode.Create
, System.IO.FileAccess.ReadWrite);
fs.Write(image, 0, image.Length);

For me it was a permission problem. Somebody removed write permissions on the folder for the user account under which the application was running.

Create folder path image/thumbs on your hard disk => Problem solved!

I used below logic while saving a .png format. This is to ensure the file is already existing or not.. if exist then saving it by adding 1 in the filename
Bitmap btImage = new Bitmap("D:\\Oldfoldername\\filename.png");
string path="D:\\Newfoldername\\filename.png";
int Count=0;
if (System.IO.File.Exists(path))
{
do
{
path = "D:\\Newfoldername\\filename"+"_"+ ++Count + ".png";
} while (System.IO.File.Exists(path));
}
btImage.Save(path, System.Drawing.Imaging.ImageFormat.Png);

I encountered this error while trying to convert Tiff images to Jpeg. For me the issue stemmed from the tiff dimensions being too large. Anything up to around 62000 pixels was fine, anything above this size produced the error.

for me it was a path issue when saving the image.
int count = Directory.EnumerateFiles(System.Web.HttpContext.Current.Server.MapPath("~/images/savedimages"), "*").Count();
var img = Base64ToImage(imgRaw);
string path = "images/savedimages/upImages" + (count + 1) + ".png";
img.Save(Path.Combine(System.Web.HttpContext.Current.Server.MapPath(path)));
return path;
So I fixed it by adding the following forward slash
String path = "images/savedimages....
should be
String path = "/images/savedimages....
Hope that helps anyone stuck!

from msdn: public void Save (string filename); which is quite surprising to me because we dont just have to pass in the filename, we have to pass the filename along with the path for example: MyDirectory/MyImage.jpeg, here MyImage.jpeg does not actually exist yet, but our file will be saved with this name.
Another important point here is that if you are using Save() in a web application then use Server.MapPath() along with it which basically just returns the physical path for the virtual path which is passed in. Something like: image.Save(Server.MapPath("~/images/im111.jpeg"));

I use this solution
int G = 0;
private void toolStripMenuItem17_Click(object sender, EventArgs e)
{
Directory.CreateDirectory("picture");// هذه العملية للرسم بدون ان يحذف بقية الرسومات
G = G + 1;
FormScreen();
memoryImage1.Save("picture\\picture" + G.ToString() + ".jpg");
pictureBox1.Image = Image.FromFile("picture\\picture" + G.ToString() + ".jpg");
}

The code below solved my problem
pictureBox1.Image=myImage;
Bitmap bmp = new Bitmap(pictureBox1.Image);
bmp.Save("C:\\Users/super/Desktop/robin.jpg");

Displaying an Image from Azure Storage before downloading - C#

I'm writing a program that will allow the user to download selected images from Azure Blob Storage.
I have it working, however, currently, the images are downloaded to a file and then this file path is used to display the images. I want the images to be displayed and then allow the user to select which images can be downloaded.
Below is my code for downloading the images.
for (int i = 1; i<=dira.ListBlobs().Count(); i++)
{
try
{
CloudBlob blob = dira.GetBlobReference(i + ".png");
blob.DownloadToFile(localFilePath + "/" + i.ToString() + ".png", FileMode.Create);
// MessageBox.Show(i.ToString());
}
catch (StorageException ex)
{
}
}
Then my code for displaying the downloaded image is here:
pictureBox1.BackgroundImage= Image.FromFile(filePath + ".png");
How would I display the images before they have been downloaded?

As you said above, we can download them to memory.
Here is simple code for your reference:
CloudBlob blob = dira.GetBlobReference(i + ".png");
MemoryStream memoryStream = new MemoryStream();
blob.DownloadToStream(memoryStream);
pictureBox1.BackgroundImage = System.Drawing.Image.FromStream(memoryStream);

If you want to really save some network traffic (aka time to download) between PC and Blob storage all you have to do is create thumbnail in Azure.
I found a very nice and complete example how to do that.
Mechanism is pretty neat and 'cloudy'
Please bear in mind, that above could raise your Azure bill. As in other cases in this too you need to consider what are your priorities:
I need to be super quick and save network for my users -> create thumbnails in Azure
I want to save costs on my side and performance is not a concern -> download full sized image and create thumbnail on host

You can not show images without downloading it
But instead,
You should create a thumbnail image with your actual image so when you show the list to a user you can download thumbnails from the server and then actual images on user selection
you can create thumbnail using below code
public static System.Drawing.Bitmap ResizeImage(System.Drawing.Image image, int width, int height)
{
//a holder for the result
Bitmap result = new Bitmap(width, height);
//use a graphics object to draw the resized image into the bitmap
using (Graphics graphics = Graphics.FromImage(result))
{
//set the resize quality modes to high quality
graphics.CompositingQuality = System.Drawing.Drawing2D.CompositingQuality.HighQuality;
graphics.InterpolationMode = System.Drawing.Drawing2D.InterpolationMode.HighQualityBicubic;
graphics.SmoothingMode = System.Drawing.Drawing2D.SmoothingMode.HighQuality;
//draw the image into the target bitmap
graphics.DrawImage(image, 0, 0, result.Width, result.Height);
}
//return the resulting bitmap
return result;
}
Ref:- C# Creating thumbnail

Unable to Save .jpg file using Server.MapPath [duplicate]

I am working on to upload and save a thumbnail copy of that image in a thumbnail folder.
I am using following link:
http://weblogs.asp.net/markmcdonnell/archive/2008/03/09/resize-image-before-uploading-to-server.aspx
but
newBMP.Save(directory + "tn_" + filename);
is causing exception "A generic error occurred in GDI+."
I have tried to give permission on folder, also tried to use a new separate bmp object when saving.
Edit:
protected void ResizeAndSave(PropBannerImage objPropBannerImage)
{
// Create a bitmap of the content of the fileUpload control in memory
Bitmap originalBMP = new Bitmap(fuImage.FileContent);
// Calculate the new image dimensions
int origWidth = originalBMP.Width;
int origHeight = originalBMP.Height;
int sngRatio = origWidth / origHeight;
int thumbWidth = 100;
int thumbHeight = thumbWidth / sngRatio;
int bannerWidth = 100;
int bannerHeight = bannerWidth / sngRatio;
// Create a new bitmap which will hold the previous resized bitmap
Bitmap thumbBMP = new Bitmap(originalBMP, thumbWidth, thumbHeight);
Bitmap bannerBMP = new Bitmap(originalBMP, bannerWidth, bannerHeight);
// Create a graphic based on the new bitmap
Graphics oGraphics = Graphics.FromImage(thumbBMP);
// Set the properties for the new graphic file
oGraphics.SmoothingMode = SmoothingMode.AntiAlias; oGraphics.InterpolationMode = InterpolationMode.HighQualityBicubic;
// Draw the new graphic based on the resized bitmap
oGraphics.DrawImage(originalBMP, 0, 0, thumbWidth, thumbHeight);
Bitmap newBitmap = new Bitmap(thumbBMP);
thumbBMP.Dispose();
thumbBMP = null;
// Save the new graphic file to the server
newBitmap.Save("~/image/thumbs/" + "t" + objPropBannerImage.ImageId, ImageFormat.Jpeg);
oGraphics = Graphics.FromImage(bannerBMP);
// Set the properties for the new graphic file
oGraphics.SmoothingMode = SmoothingMode.AntiAlias; oGraphics.InterpolationMode = InterpolationMode.HighQualityBicubic;
// Draw the new graphic based on the resized bitmap
oGraphics.DrawImage(originalBMP, 0, 0, bannerWidth, bannerHeight);
// Save the new graphic file to the server
bannerBMP.Save("~/image/" + objPropBannerImage.ImageId + ".jpg");
// Once finished with the bitmap objects, we deallocate them.
originalBMP.Dispose();
bannerBMP.Dispose();
oGraphics.Dispose();
}

When either a Bitmap object or an Image object is constructed from a
file, the file remains locked for the lifetime of the object. As a
result, you cannot change an image and save it back to the same file
where it originated.
http://support.microsoft.com/?id=814675
A generic error occurred in GDI+, JPEG Image to MemoryStream
Image.Save(..) throws a GDI+ exception because the memory stream is closed
http://alperguc.blogspot.in/2008/11/c-generic-error-occurred-in-gdi.html
EDIT:
just writing from memory...
save to an 'intermediary' memory stream, that should work
e.g. try this one - replace
Bitmap newBitmap = new Bitmap(thumbBMP);
thumbBMP.Dispose();
thumbBMP = null;
newBitmap.Save("~/image/thumbs/" + "t" + objPropBannerImage.ImageId, ImageFormat.Jpeg);
with something like:
string outputFileName = "...";
using (MemoryStream memory = new MemoryStream())
{
using (FileStream fs = new FileStream(outputFileName, FileMode.Create, FileAccess.ReadWrite))
{
thumbBMP.Save(memory, ImageFormat.Jpeg);
byte[] bytes = memory.ToArray();
fs.Write(bytes, 0, bytes.Length);
}
}

This error message is displayed if the path you pass to Bitmap.Save() is invalid (folder doesn't exist etc).

// Once finished with the bitmap objects, we deallocate them.
originalBMP.Dispose();
bannerBMP.Dispose();
oGraphics.Dispose();
This is a programming style that you'll regret sooner or later. Sooner is knocking on the door, you forgot one. You are not disposing newBitmap. Which keeps a lock on the file until the garbage collector runs. If it doesn't run then the second time you try to save to the same file you'll get the klaboom. GDI+ exceptions are too miserable to give a good diagnostic so serious head-scratching ensues. Beyond the thousands of googlable posts that mention this mistake.
Always favor using the using statement. Which never forgets to dispose an object, even if the code throws an exception.
using (var newBitmap = new Bitmap(thumbBMP)) {
newBitmap.Save("~/image/thumbs/" + "t" + objPropBannerImage.ImageId, ImageFormat.Jpeg);
}
Albeit that it is very unclear why you even create a new bitmap, saving thumbBMP should already be good enough. Anyhoo, give the rest of your disposable objects the same using love.

In my case the bitmap image file already existed in the system drive, so my app threw the error "A Generic error occured in GDI+".
Verify that the destination folder exists
Verify that there isn't already a file with the same name in the destination folder

Check your folder's permission where the image is saved
Right cLick on folder then go :
Properties > Security > Edit > Add-- select "everyone" and check Allow "Full Control"

I was facing the same issue A generic error occurred in GDI+ on saving while working on MVC app, I was getting this error because I was writing wrong path to save image, I corrected saving path and it worked fine for me.
img1.Save(Server.MapPath("/Upload/test.png", System.Drawing.Imaging.ImageFormat.Png);
--Above code need one change, as you need to put close brackets on Server.MapPath() method after writing its param.
Like this-
img1.Save(Server.MapPath("/Upload/test.png"), System.Drawing.Imaging.ImageFormat.Png);

GDI+ exceptions occured due to below points
Folder access issue
Missing properties of images
If folder issue - please provide access to application
If Missing properties then use below code
Code 1
using (Bitmap bmp = new Bitmap(webStream))
{
using (Bitmap newImage = new Bitmap(bmp))
{
newImage.Save("c:\temp\test.jpg", ImageFormat.Jpeg);
}
}
Code 2
using (Bitmap bmp = new Bitmap(webStream))
{
using (Bitmap newImage = new Bitmap(bmp))
{
newImage.SetResolution(bmp.HorizontalResolution, bmp.VerticalResolution);
Rectangle lockedRect = new Rectangle(0, 0, bmp.Width, bmp.Height);
BitmapData bmpData = newImage.LockBits(lockedRect, ImageLockMode.ReadWrite, bmp.PixelFormat);
bmpData.PixelFormat = bmp.PixelFormat;
newImage.UnlockBits(bmpData);
using (Graphics gr = Graphics.FromImage(newImage))
{
gr.SmoothingMode = SmoothingMode.HighQuality;
gr.InterpolationMode = InterpolationMode.HighQualityBicubic;
gr.PixelOffsetMode = PixelOffsetMode.HighQuality;
}
foreach (var item in bmp.PropertyItems)
{
newImage.SetPropertyItem(item);
}
newImage.Save("c:\temp\test.jpg", ImageFormat.Jpeg);
}
}
Different between code 1 and code 2
Code - 1 : it will just create image and can open it on normal image viewer
the image can't open in Photoshop
Image size will be double
Code - 2 : to open image in image edition tools use code
by using code 1 it just create images but it not assign image marks.

I always check/test these:
Does the path + filename contain illegal characters for the given filesystem?
Does the file already exist? (Bad)
Does the path already exist? (Good)
If the path is relative: am I expecting it in the right parent directory (mostly bin/Debug ;-) )?
Is the path writable for the program and as which user does it run? (Services can be tricky here!)
Does the full path really, really not contain illegal chars? (some unicode chars are close to invisible)
I never had any problems with Bitmap.Save() apart from this list.

I had a different issue with the same exception.
In short:
Make sure that the Bitmap's object Stream is not being disposed before calling .Save .
Full story:
There was a method that returned a Bitmap object, built from a MemoryStream in the following way:
private Bitmap getImage(byte[] imageBinaryData){
.
.
.
Bitmap image;
using (var stream = new MemoryStream(imageBinaryData))
{
image = new Bitmap(stream);
}
return image;
}
then someone used the returned image to save it as a file
image.Save(path);
The problem was that the original stream was already disposed when trying to save the image, throwing the GDI+ exeption.
A fix to this problem was to return the Bitmap without disposing the stream itself but the returned Bitmap object.
private Bitmap getImage(byte[] imageBinaryData){
.
.
.
Bitmap image;
var stream = new MemoryStream(imageBinaryData))
image = new Bitmap(stream);
return image;
}
then:
using (var image = getImage(binData))
{
image.Save(path);
}

I got it working using FileStream, get help from these
http://alperguc.blogspot.in/2008/11/c-generic-error-occurred-in-gdi.html
http://csharpdotnetfreak.blogspot.com/2010/02/resize-image-upload-ms-sql-database.html
System.Drawing.Image imageToBeResized = System.Drawing.Image.FromStream(fuImage.PostedFile.InputStream);
int imageHeight = imageToBeResized.Height;
int imageWidth = imageToBeResized.Width;
int maxHeight = 240;
int maxWidth = 320;
imageHeight = (imageHeight * maxWidth) / imageWidth;
imageWidth = maxWidth;
if (imageHeight > maxHeight)
{
imageWidth = (imageWidth * maxHeight) / imageHeight;
imageHeight = maxHeight;
}
Bitmap bitmap = new Bitmap(imageToBeResized, imageWidth, imageHeight);
System.IO.MemoryStream stream = new MemoryStream();
bitmap.Save(stream, System.Drawing.Imaging.ImageFormat.Jpeg);
stream.Position = 0;
byte[] image = new byte[stream.Length + 1];
stream.Read(image, 0, image.Length);
System.IO.FileStream fs
= new System.IO.FileStream(Server.MapPath("~/image/a.jpg"), System.IO.FileMode.Create
, System.IO.FileAccess.ReadWrite);
fs.Write(image, 0, image.Length);

For me it was a permission problem. Somebody removed write permissions on the folder for the user account under which the application was running.

Create folder path image/thumbs on your hard disk => Problem solved!

I used below logic while saving a .png format. This is to ensure the file is already existing or not.. if exist then saving it by adding 1 in the filename
Bitmap btImage = new Bitmap("D:\\Oldfoldername\\filename.png");
string path="D:\\Newfoldername\\filename.png";
int Count=0;
if (System.IO.File.Exists(path))
{
do
{
path = "D:\\Newfoldername\\filename"+"_"+ ++Count + ".png";
} while (System.IO.File.Exists(path));
}
btImage.Save(path, System.Drawing.Imaging.ImageFormat.Png);

I encountered this error while trying to convert Tiff images to Jpeg. For me the issue stemmed from the tiff dimensions being too large. Anything up to around 62000 pixels was fine, anything above this size produced the error.

for me it was a path issue when saving the image.
int count = Directory.EnumerateFiles(System.Web.HttpContext.Current.Server.MapPath("~/images/savedimages"), "*").Count();
var img = Base64ToImage(imgRaw);
string path = "images/savedimages/upImages" + (count + 1) + ".png";
img.Save(Path.Combine(System.Web.HttpContext.Current.Server.MapPath(path)));
return path;
So I fixed it by adding the following forward slash
String path = "images/savedimages....
should be
String path = "/images/savedimages....
Hope that helps anyone stuck!

from msdn: public void Save (string filename); which is quite surprising to me because we dont just have to pass in the filename, we have to pass the filename along with the path for example: MyDirectory/MyImage.jpeg, here MyImage.jpeg does not actually exist yet, but our file will be saved with this name.
Another important point here is that if you are using Save() in a web application then use Server.MapPath() along with it which basically just returns the physical path for the virtual path which is passed in. Something like: image.Save(Server.MapPath("~/images/im111.jpeg"));

I use this solution
int G = 0;
private void toolStripMenuItem17_Click(object sender, EventArgs e)
{
Directory.CreateDirectory("picture");// هذه العملية للرسم بدون ان يحذف بقية الرسومات
G = G + 1;
FormScreen();
memoryImage1.Save("picture\\picture" + G.ToString() + ".jpg");
pictureBox1.Image = Image.FromFile("picture\\picture" + G.ToString() + ".jpg");
}

The code below solved my problem
pictureBox1.Image=myImage;
Bitmap bmp = new Bitmap(pictureBox1.Image);
bmp.Save("C:\\Users/super/Desktop/robin.jpg");

How can I open a bitmap file , change it and then save it?

I am trying to open a bitmap file and then change it and save it, but I am getting some error. The code is as follow:
var tempFileNamePath = Path.Combine(workingDirectory, fileName);
Bitmap image = new Bitmap(tempFileNamePath);
var newImage = (Bitmap)image.Clone();
image.Dispose();
newImage.EnhanceImage();
newImage.Save(tempFileNamePath, System.Drawing.Imaging.ImageFormat.Jpeg);
newImage.Dispose();
But it fails to save the file with error: A generic error happens in GDI+
Any thought of why tis is happening?

Bitmap.Clone() doesn't do what you hope it does. It is a shallow copy, it still uses the pixel data of the original image. So disposing the original image doesn't release the lock on the file.
To get a deep copy use the Bitmap(Image) constructor:
Bitmap newImage = null;
using (var image = new Bitmap(tempFileNamePath)) {
newImage = new Bitmap(image);
}
Renaming the original file would be cheap alternative that uses less memory, favor this when the image is large:
newImage.EnhanceImage();
var tmpname = tempFileNamePath + ".bak";
System.IO.File.Delete(tmpname);
System.IO.File.Move(tempFileNamePath, tmpname);
try {
newImage.Save(tempFileNamePath, System.Drawing.Imaging.ImageFormat.Jpeg);
}
catch {
System.IO.File.Move(tmpname, tempFileNamePath);
throw;
}
finally {
newImage.Dispose();
}
System.IO.File.Delete(tmpname);

The action can't be completed because the file is open in IIS Worker Process

I am uploading a image for a user & saving it on a specified location. The code is working fine in normal scenario i.e. user selects a image & save it, it works.
Challenge occurs when user selects a image( probably wrong image due to mistake) & don't save it, but again selects a new image & then saves it.
This scenario gives me the error :
"The process cannot access the file because it is being used by another process."
When I try to delete image from the location at the time of error, file can't be deleted with message:
"The action can't be completed because the file is open in IIS Worker Process
Close the file and try again."
Code is like this:
try
{
if (!Directory.Exists(folder))
Directory.CreateDirectory(folder);
msf = new MemoryStream();
bytes=FileUpload1.FileBytes;
msf.Write(bytes, 0, bytes.Length);
using (FileStream stream = new FileStream(folder + "/" + filename, FileMode.Create, FileAccess.ReadWrite, FileShare.ReadWrite))
{
//converting any graphic file type to jpeg format
Image img = Image.FromStream(msf);
img.Save(stream, System.Drawing.Imaging.ImageFormat.Jpeg);
msf.WriteTo(stream);
IsuploadSuccess = true;
img.Dispose();
}
}
catch
{
IsuploadSuccess = false;
}
finally
{
if (msf != null)
{
msf.Close();
msf.Dispose();
}
}
I have tried adding "FileAccess.ReadWrite" & "FileShare.ReadWrite" in file stream, but doesn't work either with all options in File stream.
Please help...

Instead of getting solution of problem, I finally change approach to get rid to source of challenge. I change file name with UserID (unique) appended with CurrentDateTime converted to string & store it to temp folder until user save the change. This forms a different file each time for the challenge scenario. After save each file in temp folder created by the user (preceded by unique userid) is deleted & last changes are saved to respective directory.

I had this problem and took me few hours to figure it out.
I my case the Bitmap new(path) had locked the file. I had to dispose of it before exiting the using block.
However it is the method by which I debugged it is important.
My approach in pinpointing the source of the problem was to open the folder where the image was saved and tracing the code line by line. After each line I deleted the file and did Ctrl+Z to put it back. If it gave an error when I tried to delete it, then that is the line that locked it. So I got to that line within 5 min.
using (MemoryStream memoryStream = new())
{
if (System.IO.File.Exists(path))
{
using(Bitmap bitmap = new(path)) <-- this solved it
{
ImageConverter imageConverter = new();
bitmap.Save(memoryStream, ImageFormat.Bmp);
bytes = memoryStream.ToArray();
}
}
}

Categories