I am trying to post to a facebook group via the graph api in c#.
https://developers.facebook.com/docs/graph-api/reference/v2.2/group/feed
According to the api I can post a message as well as a link to a url, here is my code to try and do this:
Uri result;
bool X = Uri.TryCreate(url, UriKind.Absolute, out result)
if(X){
// POST to group FB
dynamic fbInfo = fb.Post("/v2.2/" + "groupID" + "/feed", new
{
message = websiteDesc,
link = url
});
var fbInfoJson = fbInfo.ToString();
}
First i check that the url is absolute and if so proceed to post to the facebook group.
so far this code does post to the group but only the message and not the link.
How can I get it to post the link?
Also the api says that I can include a photo to the post but it must be a string, can i assume this is the url of the image?
Thanks in advance :)
I am not entirely sure, but the docs say "Either link or message must be supplied" so maybe you can only post a message OR a link. Definitely worth to try. It must be an absolute URL, of course. Same goes for the picture.
Posting in a group is pretty hard nowadays anyway, since you would need user_groups and publish_actions for that - and you will not get user_groups approved so you can´t use it for a public App. It will only work for users with a role in the App (Admin, Developer, Tester).
Related
I am trying to post on specific group of users on facebook such as (close friends, or family, or college friend...) and I used the code bellow.
code that I used:
1
FacebookClient fpost1 = new FacebookClient(access_token);
fpost1.Post("/1234567890/feed", new { message = "test post"});
note: access_token is working correctly when I am doing some job before this exception.
I put my friendlist id instead of 1234567890, that you can get it from graph .../me?fields=friendlists
it did not work and gave me this error "(OAuthException - #2) An unexpected error has occurred. Please retry your request later."
2
FacebookClient fpost1 = new FacebookClient(access_token);
fpost1.Post("/me/feed", new { message = "it is very cold.", to="1234567890"});
this one work, but it post to "only me" as target.
thank you
It looks to me that what you are doing here...
FacebookClient fpost1 = new FacebookClient(access_token);
fpost1.Post("/1234567890/feed", new { message = "test post"});
is wrong. Because I believe that 1234567890 is a user-id, right? Not a friendslist-id. According to the documentation this edge/endpoint signature goes like....
/{user-id}/feed
where user-id is obviously a user id. The documentation states that...
Most nodes in the Graph API have edges that can be published to (such as Photos or Posts). All Graph API publishing is done simply with an HTTP POST request to the relevant endpoint with any necesssary parameters included. For example, if you wanted to publish a post on behalf of someone, you would make an HTTP POST request as below:
POST graph.facebook.com
/{user-id}/feed?
message={message}&
access_token={access-token}
Notice that it says "On Behalf of Someone". My understanding is that you are publishing on behalf of someone and to do that, this someone must have requested an access_token through your application. In other words, if this user hasn't logged in to your app and generated a valid access token you cannot publish on his/her wall
POST graph.facebook.com
me/feed?message="hello"&privacy={"value": "CUSTOM", "allow": "1234567890"}
where the 1234567890 is one of friendlists id
I am trying to integrate paypal sandbox with my asp.net application ! I have integrated module and i have redirected to paypal sandbox site ! You can login to sandbox and make payment ! Paypal focus redirects to my return URL ! Now the problem is I don't know what paypal sandbox returns with 'return URL' and even I am new with sandbox so I don't know how to manage the redirected data ! Kindly Inform me ! Thank you !
I have tried to download demos ! But in demos most of uses their own dll ! They are not providing class definition so I am little bit confused !
At first, check the paypal docs which fields are returned. As Mr. Disappointment guessed, the data will probably be returned as form data in a HTTP POST request.
You can check the request and the data with fiddler.
To access form data within an ASP.NET app, you simply use the Request object:
var field = Request["fieldName"];
Log into your sandbox account, then click on Documentation --> Sample Code then click the Integration Wizard link to generate all the sample code that you need.
The return URL will have two URL Params:
token,
payerId
I am using MVC so my Controller Method signature looks like this:
public ActionResult PaypalOrderConfirmation(string token, string payerId)
but you could just use e.g. Request.QueryString("token"); //Is that right it's been a while...
Then you need to "Commit the payment"
NVPCodec nvpCodec = new NVPCodec();
string returnMessage;
bool success = PayPal.CommitPayment(someTotal, token, payerId, out nvpCodec, out returnMessage);
//----------------------------------------------------------------------------//
public static bool CommitPayment(decimal finalPaymentAmount, string token, string payerId, out NVPCodec nvpCodec, out string returnMessage)
{
nvpCodec = new NVPCodec();
returnMessage = "";
bool success = new NVPAPICaller().ConfirmPayment(finalPaymentAmount.ToString(), token, payerId, ref nvpCodec, ref returnMessage);
return success;
}
I will go have another look on paypal for the download code and add it to this post if I find it.
I'm developing an asp.net MVC 3 Facebook app and I am trying to post a message to my wall. Here is my code:
FacebookWebClient client = new FacebookWebClient();
// Post to user's wall
var postparameters = new Dictionary<string, object>();
postparameters["message"] = "Hello world!";
postparameters["name"] = "This is a name";
postparameters["link"] = "http://thisisalink.com;
postparameters["description"] = "This is a description";
var result = client.Post("/me/feed", postparameters);
I can get the access token using client.AccessToken, so I'm assuming I don't have to set it anywhere. This code produces no errors and for the result I get an ID. However, when I bring up my Facebook, I see nothing on my wall nor in my news feed. I'm not sure what I'm missing. I've looked at related questions here at StackOverflow, but I see no reports/questions similar to mine. I've also tried changing the code based on what I've seen in other posts, but to no avail. I also checked my Facebook account settings and I see my application listed with permission to post to my wall. I also tried posting a message to my wall via the Graph API explorer and I'm getting the same result. I get an ID in return, but when I check my Facebook account I see nothing. At been at this for a couple of days. Any help would be greatly appreciated.
Thanks in advance.
[EDIT]
I wonder if something is wrong with my app generated access_token. Using this access_token, as I mentioned in my post, I get the same result using the Graph API explorer. An ID is returned, but no message on my wall. However, if I give the Graph API explorer permission to post to my wall and use its own generated access_token, I can successfully post a message using the explorer. Here's the FB login button code:
<div>
<h1>Login using Facebook</h1>
<p><fb:login-button perms="user_location, publish_stream, email"></fb:login-button></p>
</div>
Basically you need to add an additional parameter into your post parameters.
args["access_token"] = account.access_token;
this is the token of the specific page.
I wont repeat the code, follow here for example: Post On Facebook Page As Page Not As Admin User Using Facebook C# SDK
(second answer)
Did you request right App permissions to Facebook in your action method?
Try: [CanvasAuthorize(Permissions = "user_location, publish_stream, email")]
Did you append the access_token to the URL? See example here. It's also documented here (see Using the Access Token).
/me/feed?access_token=<access_token>
with one small change, your code works fine for me. you have to pass the users auth token into the constructor like this...
var client = new FacebookClient(accessToken);
// Post to user's wall
var postparameters = new Dictionary<string, object>();
postparameters["message"] = "Hello world!";
postparameters["name"] = "This is a name";
postparameters["link"] = "http://thisisalink.com;
postparameters["description"] = "This is a description";
var result = client.Post("/me/feed", postparameters);
this method works for me, although i am not sure which facebook sdk you are using.
i'm using http://facebooksdk.net/ its quite good so if you're not using it i would recommend it
I have tried migrating my app to the OAuth 2.0 routine. I am having trouble getting the access_token from the cookie set by the JavaScript API. I decode the information in the cookie, but instead of an access_token and the user information I get a code. This seems like a rather weird change.
Is there any workaround for this, because it seems that you can't get your code exchanged to an access_token when you haven't specified a redirect_uri when you acquired the code.
I have considered just taking the access_token from the response in the JavaScript API and storing it in a cookie, but that kinda defeats the whole purpose of the extended security and I wanted to ask if there was a proper way to do it.
Could be that I am doing something wrong though, and if that is the case please tell me :)
EDIT
I am aware that the cookie holds a signed request, but according to the docs that signed request should hold the information I require like access_token and uid, but in my instance it only holds the code. That is basically the part I don't understand.
Turns out that (even though it is not documented) we need to exchange the code for an access_token ourselves. I think this is a total waste since that was the nice thing about the old cookie. It was fast and easy to get the access_token.
Anyway. To get the access_token from the new cookie you need to do the following:
public string ReturnAccessToken()
{
HttpCookie cookie = htc.Request.Cookies[string.Format("fbsr_{0}", facebookAppID)];
string jsoncode = System.Text.ASCIIEncoding.ASCII.GetString(FromBase64ForUrlString(cookie.Value.Split(new char[] { '.' })[1]));
JsonData data = JsonMapper.ToObject(jsoncode);
getAccessToken(data["code"].ToJson()
}
private string getAccessToken(string code)
{
//Notice the empty redirect_uri! And the replace on the code we get from the cookie.
string url = string.Format("https://graph.facebook.com/oauth/access_token?client_id={0}&redirect_uri={1}&client_secret={2}&code={3}", "YOUR_APP_ID", "", "YOUR_APP_SECRET", code.Replace("\"", ""));
System.Net.HttpWebRequest request = System.Net.WebRequest.Create(url) as System.Net.HttpWebRequest;
System.Net.HttpWebResponse response = null;
using (response = request.GetResponse() as System.Net.HttpWebResponse)
{
System.IO.StreamReader reader = new System.IO.StreamReader(response.GetResponseStream());
string retVal = reader.ReadToEnd();
return retVal;
}
}
public byte[] FromBase64ForUrlString(string base64ForUrlInput)
{
int padChars = (base64ForUrlInput.Length % 4) == 0 ? 0 : (4 - (base64ForUrlInput.Length % 4));
StringBuilder result = new StringBuilder(base64ForUrlInput, base64ForUrlInput.Length + padChars);
result.Append(String.Empty.PadRight(padChars, '='));
result.Replace('-', '+');
result.Replace('_', '/');
return Convert.FromBase64String(result.ToString());
}
This may seem a bit redundant, but I suppose you can store the access_token in a session variable. If you do this and iFrame the your app on Facebook you need to know that it will not work in IE 6, 7 and 8 if the user have set his browser privacy settings to medium. There is a workaround for this, but as it is not a part of this question I will not write it. If people really want it, write a comment and I will show it :)
-----------------------------------EDIT------------------------------------------
When using any of the old IE browsers you can't use cookies or session variables in pages that are Iframed in, like your pages on Facebook. This is a problem that can't really be solved sufficiently in coding. By sufficiently I mean that the solution is not nice. You need to set the p3p-header in your response. You can of course do this in coding for all the pages that you service, but the easiest solution (if you are using a .NET server to host your pages) is to set up a p3p policy for the IIS. A guide for this can be seen in http://support.microsoft.com/kb/324013. It shouldn't matter what you write in the p3p policy (if you check Facebooks own you can see that they use "We don't have a p3p policy), the important part is that there stands something. I have had troubles just using random text though, but if you use the text in the example there shouldn't be a problem :)
This took me forever to find out, so I hope someone can use it :D
Unfortunately I don't have the answer directly, but I do have a documentation bug that I filed against facebook in order to try to get the documentation there: http://bugs.developers.facebook.net/show_bug.cgi?id=20363
I have a similar problem that when I try to decode the signedRequest from the authResponse of FB.login, they payload contains something like:
{"algorithm":"HMAC-SHA256","code":"THE_CODE_HERE","issued_at":1315433244,"user_id":"THE_USER_ID"}
As you stated, the docs do talk about how to turn that code into an access_token. That appears to be in the "Server Side" documentation here: http://developers.facebook.com/docs/authentication/
If you grab the accessToken from FB.login you can get it from the js and cache it, but as you said, that isn't actually signed, and could relatively easily be faked.
And you're right, this doesn't appear to have any of the useful information that's described here: developers.facebook.com/docs/authentication/signed_request/ (http removed since I don't have enough reputation points yet to post more than 2 links - sorry)
Perhaps you can vote up my bug? I'll post this link on that bug too.
fbsr_APP_ID cookie is actually a signed_request, check out facebook official docs how do you decode signed request verify signature and get the user information. You can look also at official php SDK source how they get access token from there.
You have to use the code to get the actual access_token.
Anybody know where I can find a simple example C# code example? Apparently really tough to find.
I'm just starting out, got my Developer key.
Initial (really noob question/presumption) - -Can (should/must) my solution be a web service client? No new libraries I need to install in .Net right?
Basically, as a test, I want to be able to securely present a single note from a private notebook in html similar to what the Everfort export in html looks like on a outside WebSite.
Many Thanks in Advance!
You should start by downloading our API ZIP from http://www.evernote.com/about/developer/api/. You'll find C# client sample code in /sample/csharp. This sample code demonstrates using the Evernote API from a desktop application that authenticates using username and password.
I am not sure if you ever got this working, but I was playing around with Evernote, OpenAuth and C# this morning and managed to get it all working. I have put together a blog post / library explaining the experience and outlining how to do it with MVC here - http://www.shaunmccarthy.com/evernote-oauth-csharp/ - it uses the AsyncOAuth library: https://github.com/neuecc/AsyncOAuth
I wrote a wrapper around AsyncOAuth that you might find useful here: https://github.com/shaunmccarthy/AsyncOAuth.Evernote.Simple
One prickly thing to be aware of - the Evernote Endpoints (/oauth and /OAuth.action) are case sensitive
// Download the library from https://github.com/shaunmccarthy/AsyncOAuth.Evernote.Simple
// Configure the Authorizer with the URL of the Evernote service,
// your key, and your secret.
var EvernoteAuthorizer = new EvernoteAuthorizer(
"https://sandbox.evernote.com",
"slyrp-1234", // Not my real id / secret :)
"7acafe123456badb123");
// First of all, get a request token from Evernote - this causes a
// webrequest from your server to Evernote.
// The callBackUrl is the URL you want the user to return to once
// they validate the app
var requestToken = EvernoteAuthorizer.GetRequestToken(callBackUrl);
// Persist this token, as we are going to redirect the user to
// Evernote to Authorize this app
Session["RequestToken"] = requestToken;
// Generate the Evernote URL that we will redirect the user to in
// order to
var callForwardUrl = EvernoteAuthorizer.BuildAuthorizeUrl(requestToken);
// Redirect the user (e.g. MVC)
return Redirect(callForwardUrl);
// ... Once the user authroizes the app, they get redirected to callBackUrl
// where we parse the request parameter oauth_validator and finally get
// our credentials
// null = they didn't authorize us
var credentials = EvernoteAuthorizer.ParseAccessToken(
Request.QueryString["oauth_verifier"],
Session["RequestToken"] as RequestToken);
// Example of how to use the credential with Evernote SDK
var noteStoreUrl = EvernoteCredentials.NotebookUrl;
var noteStoreTransport = new THttpClient(new Uri(noteStoreUrl));
var noteStoreProtocol = new TBinaryProtocol(noteStoreTransport);
var noteStore = new NoteStore.Client(noteStoreProtocol);
List<Notebook> notebooks = client.listNotebooks(EvernoteCredentials.AuthToken);
http://weblogs.asp.net/psteele/archive/2010/08/06/edamlibrary-evernote-library-for-c.aspx might help. As the author states it just bundles some and fixes some. Haven't tried it myself but thought I'd mention for a possibly easier way to get started. Possibly.
This might help too...found it using the Way Back Machine since the original blog site was offline.
https://www.evernote.com/pub/bluecockatoo/Evernote_API#b=bb2451c9-b5ff-49bb-9686-2144d984c6ba&n=c30bc4eb-cca4-4a36-ad44-1e255eeb26dd
The original blog post: http://web.archive.org/web/20090203134615/http://macrolinz.com/macrolinz/index.php/2008/12/
Scroll down and find the post from December 26 - "Get it while it's hot..."