I am building a LINQ query, which will have comparisons attached to the 'where' section (the number of these comparisons depends on the user's selections).
In the code-behind, I want something like this:
var builtQuery =
from q in dc.Leads
join sr in dc.SalesReps on q.SalesRepID equals sr.SalesRepID
join co in dc.Companies on q.CompanyID equals co.CompanyID
join or in dc.Origins on q.OriginID equals or.OriginID
join pr in dc.Products on q.ProductID equals pr.ProductID
where
Here, in between the 'from' and 'select' parts, I will add a number of comparisons (depending on the user's selection of checkboxes).
And Finally:
select new { q.Ref, sr.Rep, q.Deposit, q.Sale, q.Title, q.Names, q.Surname, q.HomePhone, q.WorkPhone, q.Mobile, q.Address, q.Suburb, q.County, q.Postcode, co.CompanyName, or.OriginName, pr.ProductName, q.Telemarket, q.Entered };
In PHP (using MySQL) I could simply concatenate a number of strings, which make up the query. But, in c#/LINQ To SQL, the query is not a string and so I have no idea how to do this...There were a couple similar questions on SO, but they're not quite the same thing.
Any ideas??
Thanks!
I would do it in the following way
var intermediateQuery=
from q in dc.Leads
join sr in dc.SalesReps on q.SalesRepID equals sr.SalesRepID
join co in dc.Companies on q.CompanyID equals co.CompanyID
join or in dc.Origins on q.OriginID equals or.OriginID
join pr in dc.Products on q.ProductID equals pr.ProductID
select new { q.Ref, sr.Rep, q.Deposit, q.Sale, q.Title, q.Names, q.Surname, q.HomePhone, q.WorkPhone, q.Mobile, q.Address, q.Suburb, q.County, q.Postcode, co.CompanyName, or.OriginName, pr.ProductName, q.Telemarket, q.Entered };
and then add some filters considering user input
if(SomeUserProductFilter)
{
var result = intermediateQuery.Where(p=>p.ProductName = 'UserProductName');
}
Do not be afraid that this approach will retrieve all data and than filters it in memory. LINQ sends query to database only when you call ToList(), ToArray() or use result in foreach loop
Related
I have a SQL query which includes a left join and a group by- so far so good- my trouble arises from one of the join conditions not being a straight "equals to" and I'm lost where to go with LINQ.
I know multiple join conditions usually involves creating a couple of anonymous objects and comparing them, but when I add an "equal to" and "a greater" than into the mix, I've no idea how that applies.
Here's what I'd like the query to look like if I had invented LINQ, but I know the "and" in my join condition is invalid;
var query =
from csp in db.ChatSessionPersons
join cm in db.ChatMessages on
csp.ChatSessionId equals cm.ChatSessionId
and cm.Id > csp.LastReadChatMessageId
// (i know these should be the other way round,
// but for readability I present them like this!)
into j1
from j2 in j1.DefaultIfEmpty()
group j2 by csp.ChatSessionId into grouped
select new {
ChatSessionId = grouped.Key,
UnreadCount = grouped.Count(t => t.Id != null)};
Any ideas anyone?
You can convert the non-equality condition to a lambda Where on the group join result.
var query = from csp in db.ChatSessionPersons
join cm in db.ChatMessages on csp.ChatSessionId equals cm.ChatSessionId into cmj
select new {
ChatSessionId = csp.ChatSessionId,
UnreadCount = cmj.Where(cm => cm.Id > csp.LastReadChatMessageId).Count()
};
NOTE: I modified the query a bit to remove the group by which isn't needed if you are using a group join that has already grouped the matching results, and to remove the left join DefaultIfEmpty which also isn't needed when processing a group join with something like Count, unless you wanted to return an UnreadCount of 1 when there are no matches, in which case you should put DefaultIfEmpty() before Count().
Of course, you could use query comprehension in the sub-query:
var query = from csp in db.ChatSessionPersons
join cm in db.ChatMessages on csp.ChatSessionId equals cm.ChatSessionId into cmj
select new {
ChatSessionId = csp.ChatSessionId,
UnreadCount = (from cm in cmj where cm.Id > csp.LastReadChatMessageId select cm).Count()
};
I have the following SQL query. I would like to know how to write the same query in LINQ and C#.
select ph.Id,p.Id as projInfoId, ph.Title, ph.AdditionalHours, ph.AdditionalCost,
ph.InsertDate, ph.InsertBy, ph.LastUpdateDate, ph.LastUpdateBy, ph.TeamId,
ph.ProjInfoId
from tblTeamType t
join ProjInformation p on t.team_id = p.teamId
join projProject pj on p.projectId=pj.projectId
inner join ProjInfoAdditionalHrs ph on p.teamId = ph.teamId and p.Id = ph.proJinfoid
I think it is easier to translate SQL using query comprehension syntax instead of lambda syntax.
General rules:
Translate inner queries into separate query variables
Translate SQL phrases in LINQ phrase order
Use table aliases as range variables, or if none, create range
variables from table names abbreviations
Translate IN to Contains
Translate SQL functions such as DISTINCT or SUM into function calls
on the entire query.
Create anonymous objects for multi-column grouping or joining
Using these rules, you should get something like:
var ans = from t in tblTeamType
join p in ProjInformation on t.team_id equals p.teamId
join pj in projProject on p.projectId equals pj.projectId
join ph in ProjInfoAdditionalHrs on new { p.teamId, p.Id } equals new { ph.teamId, ph.proJinfold }
select new {
ph.Id,
projInfoId = p.Id,
ph.Title,
ph.AdditionalHours,
ph.AdditionalCost,
ph.InsertDate,
ph.InsertBy,
ph.LastUpdateDate,
ph.LastUpdateBy,
ph.TeamId,
ph.ProjInfoId
};
My question got down voted and put on hold because it is not specific enough. Ill try to specify
Before linq I would do this query
sql="SELECT products.* FROM products INNER JOIN productaccess ON products.id=productaccess.productid"
Now with the entity framework and link I can do this
var products = (from lProducts in db.Products
join lProductAccess in db.ProductAccess on lProducts.ID equals lProductAccess.ProductID
select lProducts).ToList();
But what if I want the flexibilty to get all products or only get the accessible objects
In sql I can do this
sql="SELECT products.* FROM products "
if (useProductAccess) {
sql+=" INNER JOIN productaccess ON products.id=productaccess.productid"
}
In Linq I have to make a separate linq statement.
if (useProductAccess) {
var productsFiltered = (from lProducts in db.Products
join lProductAccess in db.ProductAccess on lProducts.ID equals lProductAccess.ProductID
select lProducts).ToList();
} else {
var productsAll = (from lProducts in db.Products select lProducts).ToList();
}
Now, I could just get all the lProducts and then filter it in an additional linq statement with lProductAccess but then I am using an unnecessary large amount of data.
Is it an option to use:
var productsAccecible = (from lProductAccess in db.ProductAccess where lProductAccess.CustID==custID select lProductAccess).toArray();
var products = (from lProducts in db.Products
where (useProductAccess ?
productsAccessible.Contains(lProducts.ID)
: true)
select lProducts).ToList();
Linq provider will not know how to transform the ternary operator (? and :) in a valid sql, you could try this:
var query = db.Products;
if (useProductAccess)
query = query.Where(p => productsAccessible.Contains(p.ID));
var result = query.ToList();
I used the express profiler to see how the linq statement is translated into sql. It shows that the
productsAccessible.Contains(lProducts.ID)
part gets translated as
products.id in (comma seperated list of values)
My conclusion is it will work fine.
Are there possible drawbacks
Sure - it may produce an inefficient query, or it may not even work.
One thing to note is that your conditional operator won't compile; you can't return a bool and an int from the ternary operator.
Maybe you mean:
var products = (from lProducts in db.Products
where (useProductAccess ?
productsAccessible.Contains(lProducts.ID)
: true)
select lProducts).ToList();
or build your query up using method syntax and only add the where clause if necessary.
I have a form with some indexes based on a document type.
I want to build my linq-to-sql query based on those index. The user might fill just some indexes or all of then.
I would need somenthing like that
Gedi.Models.OperacoesModel.indexMatrix[] IndexMatrixArr = (from a in context.sistema_Documentos
join b in context.sistema_Indexacao on a.id equals b.idDocumento
join c in context.sistema_Indexes on a.idDocType equals c.id
join d in context.sistema_DocType_Index on c.id equals d.docTypeId
where d.docTypeId == idTipo and "BUILT STRING"
orderby b.idIndice ascending
select new Gedi.Models.OperacoesModel.indexMatrix {
idDocumento = a.id,
idIndice = b.idIndice,
valor = b.valor
}).Distinct().ToArray();
This built string should be buit early in the code something like
field1 == a and field2 == b
Is this possible?
Your goal is to create expression dynamicaly, as far as I can see. And there are no way just to put string in linq query and make it work in simple linq world - that's the bad news. But I also have a good news for you - there are some way exist to create your query dynamicaly:expression tree, dynamic LINQ.
var result = from R in db.Clients.Where(clientWhere)
join RA in db.ClientAgencies on R.SysID equals RA.SysID
join A in db.Agencies.Where(agencyWhere) on RA.AgencyID equals A.AgencyID
join AC in db.AdCommittees on A.AgencyID equals AC.AgencyID into temp
from x in temp.DefaultIfEmpty().Distinct()
select new {R,RA,x};
If user enters CommitteeID this is what I do, but I feel there has to be a better way.
var query = (from R in result
where R.x.CommitteeID == params.CommitteeID
select R.R).Distinct();
return query;
Is there a better way?
How are you using the data. The joins could be hurting you depending on what you're trying to achieve (which is very difficult for us to view without context of your data structures).
I can't fault the linq other than to say that you appear to have a log of data being joined which you may or may not need.
The other problem I have is that you will execute the query when you call DefaultIfEmpty(). This means to do your filter you may hit the database again to calculate it's result.
Could you provide some info on your DB Schema and what you are trying to get from your query?
If you're not using your intermediate query for anything else, I would flip it (filter by committeeID first):
Client GetCommitteeClient(int committeeID)
{
return (
from AC in db.AdCommittees
where AC.CommitteeID == committeeID
join A in db.Agencies.Where(agencyWhere) on AC.AgencyID equals A.AgencyID
join RA in db.ClientAgencies on A.AgencyID equals RA.AgencyID
join R in db.Clients.Where(clientWhere) on RA.SysID equals R.SysID
select R
).SingleOrDefault();
}