I am looking into publishing some service status updates on Twitter using Tweetinvi, which seems like a good library for doing that sort of thing, but I am just starting out looking into this so using it is not set in stone.
However, one thing my research has not yielded yet, is an obvious way to handle Twitter authentication in what is essentially a headless service. I have created an app with Twitter, so I have my consumer key and secret, and I can do the "app only" auth to request user info, get their followers etc., but of course I have no right to publish tweets.
So my ambition is (once this is out of beta) to create a proper twitter account, somehow have the service authenticate towards that account, and then publish status updates from the general service at defined intervals. It is a fairly simple idea.
Of course, I can do something like the PIN based authentication mentioned here:
https://github.com/linvi/tweetinvi/wiki/Authentication
I can run that manually, get the PIN code, and proceed with the workflow. But will this require reauthentication at regular intervals, or will it basically be valid "forever"? I am looking for a way to make this as automatic as possible, and having to redo the auth every x hours is a huge dent in this dream, if not a showstopper.
Of course I will have the password for the twitter account used to publish statuses, but I don't see a way to do a good old fashioned login without manual user intervention - what options do I have?
This behavior is by design. Twitter uses OAuth, which is a protocol with the purpose of allowing a user to authorize an application. This is good for the user because otherwise, you or anyone else can perform actions on their behalf without them knowing.
With that in mind, the only way to do this is to have the user explicitly authorize your app. Here's an example of how to do this with LINQ to Twitter, which I wrote, using ASP.NET MVC. When the user visit's your page, you can have a button that re-directs them to the OAuthController below to the BeginAsync action.
using System;
using System.Configuration;
using System.Linq;
using System.Threading.Tasks;
using System.Web.Mvc;
using LinqToTwitter;
namespace MvcDemo.Controllers
{
public class OAuthController : AsyncController
{
public ActionResult Index()
{
return View();
}
public async Task<ActionResult> BeginAsync()
{
//var auth = new MvcSignInAuthorizer
var auth = new MvcAuthorizer
{
CredentialStore = new SessionStateCredentialStore
{
ConsumerKey = ConfigurationManager.AppSettings["consumerKey"],
ConsumerSecret = ConfigurationManager.AppSettings["consumerSecret"]
}
};
string twitterCallbackUrl = Request.Url.ToString().Replace("Begin", "Complete");
return await auth.BeginAuthorizationAsync(new Uri(twitterCallbackUrl));
}
public async Task<ActionResult> CompleteAsync()
{
var auth = new MvcAuthorizer
{
CredentialStore = new SessionStateCredentialStore()
};
await auth.CompleteAuthorizeAsync(Request.Url);
// This is how you access credentials after authorization.
// The oauthToken and oauthTokenSecret do not expire.
// You can use the userID to associate the credentials with the user.
// You can save credentials any way you want - database,
// isolated storage, etc. - it's up to you.
// You can retrieve and load all 4 credentials on subsequent
// queries to avoid the need to re-authorize.
// When you've loaded all 4 credentials, LINQ to Twitter will let
// you make queries without re-authorizing.
//
//var credentials = auth.CredentialStore;
//string oauthToken = credentials.OAuthToken;
//string oauthTokenSecret = credentials.OAuthTokenSecret;
//string screenName = credentials.ScreenName;
//ulong userID = credentials.UserID;
//
return RedirectToAction("Index", "Home");
}
}
}
After the user authorizes your application, Twitter redirects them back to the CompleteAsync method. Notice the comments on how to extract values from the auth.CredentialStore. Save those in your DB and then retrieve them in your service to make calls on the user's behalf.
Those credentials don't change, but the user can possibly de-authorize your application at some time in the future - at which time you'll need to get them to authorize again. You can get the entire sample code at the LINQ to Twitter ASP.NET Samples page.
Related
I've been developing an Angular app with .NET Core backend (services). The task is to enable an integrated authentication, i.e. make it work with the local user seamlessly, so I login to my (connected to a local AD) machine once and the web application lets me in without the necessity to login a second time. We've been working with Identity Server 4 and intended to implement this scenario using it.
There is a little documentation on the official website concerning the Windows Authentication (e.g. against Active directory): http://docs.identityserver.io/en/latest/topics/windows.html but it doesn't explain much. As per my info, to make this scenario work the browser utilizes either Kerberos or NTLM. Neither of them is mentioned in the IS4 docs. I'm lacking the understanding of how the local credentials are getting picked up and how IS4 'knows' the user belongs to AD? How I can make sure only the users from a specific domain have access to my app?
I found some working stuff here https://github.com/damienbod/AspNetCoreWindowsAuth but questions remain the same. Even though I was able to get to the app with my local account I don't understand the flow.
I expect the user utilizing the app in the local network to log-in to the app without entering the login/password (once he's already logged in to the Windows). Is this something achievable?
Identity Server is intended to serve as an Identity Provider, if you need to talk with your AD you should see the Federation Gateway architecture they propose using the IAuthenticationSchemeProvider. Where Identity Server acts as an endpoint and talks with your AD.
This is the link:
http://docs.identityserver.io/en/latest/topics/federation_gateway.html
You have the control to programmatically reach your AD and pass the correct credentials to get the authentication. That step should be done in your Identity Server. After you get authenticated you should get redirected to your application again.
About your last question, the answer is yes, if you have your website hosted on an intranet and you have the access to your AD, you don't need to capture your credentials as user input, you can programmatically reach the AD as I said.
Bellow is the code I use to connect with my active directory
On the ExternalController class, you get when you use IdentityServer, you have this:(I don't remember at the top of my head how much I changed from the original code, but you should get the idea)
/// <summary>
/// initiate roundtrip to external authentication provider
/// </summary>
[HttpGet]
public async Task<IActionResult> Challenge(string provider, string returnUrl)
{
if (string.IsNullOrEmpty(returnUrl)) returnUrl = "~/";
// validate returnUrl - either it is a valid OIDC URL or back to a local page
if (Url.IsLocalUrl(returnUrl) == false && _interaction.IsValidReturnUrl(returnUrl) == false)
{
// user might have clicked on a malicious link - should be logged
throw new Exception("invalid return URL");
}
if (AccountOptions.WindowsAuthenticationSchemeName == provider)
{
// windows authentication needs special handling
return await ProcessWindowsLoginAsync(returnUrl);
}
else
{
// start challenge and roundtrip the return URL and scheme
var props = new AuthenticationProperties
{
RedirectUri = Url.Action(nameof(Callback)),
Items =
{
{ "returnUrl", returnUrl },
{ "scheme", provider },
}
};
return Challenge(props, provider);
}
}
private async Task<IActionResult> ProcessWindowsLoginAsync(string returnUrl)
{
// see if windows auth has already been requested and succeeded
var result = await HttpContext.AuthenticateAsync(AccountOptions.WindowsAuthenticationSchemeName);
if (result?.Principal is WindowsPrincipal wp)
{
// we will issue the external cookie and then redirect the
// user back to the external callback, in essence, testing windows
// auth the same as any other external authentication mechanism
var props = new AuthenticationProperties()
{
RedirectUri = Url.Action("Callback"),
Items =
{
{ "returnUrl", returnUrl },
{ "scheme", AccountOptions.WindowsAuthenticationSchemeName },
}
};
var id = new ClaimsIdentity(AccountOptions.WindowsAuthenticationSchemeName);
id.AddClaim(new Claim(JwtClaimTypes.Subject, wp.Identity.Name));
id.AddClaim(new Claim(JwtClaimTypes.Name, wp.Identity.Name));
// add the groups as claims -- be careful if the number of groups is too large
if (AccountOptions.IncludeWindowsGroups)
{
var wi = wp.Identity as WindowsIdentity;
var groups = wi.Groups.Translate(typeof(NTAccount));
var roles = groups.Select(x => new Claim(JwtClaimTypes.Role, x.Value));
id.AddClaims(roles);
}
await HttpContext.SignInAsync(
IdentityServer4.IdentityServerConstants.ExternalCookieAuthenticationScheme,
new ClaimsPrincipal(id),
props);
return Redirect(props.RedirectUri);
}
else
{
// trigger windows auth
// since windows auth don't support the redirect uri,
// this URL is re-triggered when we call challenge
return Challenge(AccountOptions.WindowsAuthenticationSchemeName);
}
}
If you want to use Azure AD, I would recommend you to read this article:
https://damienbod.com/2019/05/17/updating-microsoft-account-logins-in-asp-net-core-with-openid-connect-and-azure-active-directory/
Not sure if it's what you want, but I would use the Active Directory Federation Services to configure an OAuth2 endpoint and obtain the user token in the .Net Core Web App.
Isn't NTLM authentication support limited on non Microsoft browsers?
OAuth2 have the advantage of using only standard technologies.
One way to do it is to have 2 instances of the app deployed.
The first one is configured to use Windows Authentication and the other one uses IS4.
ex:
yoursite.internal.com
yoursite.com
Your local DNS should redirect traffic internally from yoursite.com to yoursite.internal.com
yoursite.internal.com will be the one configured to use AD authentication. You should have a flag in your appsettings.json to indicate if this instance is a AD auth or IS4 auth.
The downside of this solution is that you have to deploy 2 instances
Background
I am wanting to write a small, personal web app in .NET Core 1.1 to interact with YouTube and make some things easier for me to do and I am following the tutorials/samples in Google's YouTube documentation. Sounds simple enough, right? ;)
Authenticating with Google's APIs seems impossible! I have done the following:
Created an account in the Google Developer Console
Created a new project in the Google Developer Console
Created a Web Application OAuth Client ID and added my Web App debug URI to the list of approved redirect URIs
Saved the json file provided after generating the OAuth Client ID to my system
In my application, my debug server url is set (and when my application launches in debug, it's using the url I set which is http://127.0.0.1:60077).
However, when I attempt to authenticate with Google's APIs, I recieve the following error:
That’s an error.
Error: redirect_uri_mismatch
The redirect URI in the request, http://127.0.0.1:63354/authorize/,
does not match the ones authorized for the OAuth client.
Problem
So now, for the problem. The only thing I can find when searching for a solution for this is people that say
just put the redirect URI in your approved redirect URIs
Unfortunately, the issue is that every single time my code attempts to authenticate with Google's APIs, the redirect URI it is using changes (the port changes even though I set a static port in the project's properties). I cannot seem to find a way to get it to use a static port. Any help or information would be awesome!
NOTE: Please don't say things like "why don't you just do it this other way that doesn't answer your question at all".
The code
client_id.json
{
"web": {
"client_id": "[MY_CLIENT_ID]",
"project_id": "[MY_PROJECT_ID]",
"auth_uri": "https://accounts.google.com/o/oauth2/auth",
"token_uri": "https://accounts.google.com/o/oauth2/token",
"auth_provider_x509_cert_url": "https://www.googleapis.com/oauth2/v1/certs",
"client_secret": "[MY_CLIENT_SECRET]",
"redirect_uris": [
"http://127.0.0.1:60077/authorize/"
]
}
}
Method That Is Attempting to Use API
public async Task<IActionResult> Test()
{
string ClientIdPath = #"C:\Path\To\My\client_id.json";
UserCredential credential;
using (var stream = new FileStream(ClientIdPath, FileMode.Open, FileAccess.Read))
{
credential = await GoogleWebAuthorizationBroker.AuthorizeAsync(
GoogleClientSecrets.Load(stream).Secrets,
new[] { YouTubeService.Scope.YoutubeReadonly },
"user",
CancellationToken.None,
new FileDataStore(this.GetType().ToString())
);
}
var youtubeService = new YouTubeService(new BaseClientService.Initializer()
{
HttpClientInitializer = credential,
ApplicationName = this.GetType().ToString()
});
var channelsListRequest = youtubeService.Channels.List("contentDetails");
channelsListRequest.Mine = true;
// Retrieve the contentDetails part of the channel resource for the authenticated user's channel.
var channelsListResponse = await channelsListRequest.ExecuteAsync();
return Ok(channelsListResponse);
}
Project Properties
The Original Answer works, but it is NOT the best way to do this for an ASP.NET Web Application. See the update below for a better way to handle the flow for an ASP.NET Web Application.
Original Answer
So, I figured this out. The issue is that Google thinks of a web app as a JavaScript based web application and NOT a web app with server side processing. Thus, you CANNOT create a Web Application OAuth Client ID in the Google Developer Console for a server based web application.
The solution is to select the type Other when creating an OAuth Client ID in the Google Developer Console. This will have Google treat it as an installed application and NOT a JavaScript application, thus not requiring a redirect URI to handle the callback.
It's somewhat confusing as Google's documentation for .NET tells you to create a Web App OAuth Client ID.
Feb 16, 2018 Updated Better Answer:
I wanted to provide an update to this answer. Though, what I said above works, this is NOT the best way to implement the OAuth workflow for a ASP.NET solution. There is a better way which actually uses a proper OAuth 2.0 flow. Google's documentation is terrible in regards to this (especially for .NET), so I'll provide a simple implementation example here. The sample is using ASP.NET core, but it's easily adapted to the full .NET framework :)
Note: Google does have a Google.Apis.Auth.MVC package to help simplifiy this OAuth 2.0 flow, but unfortunately it's coupled to a specific MVC implementation and does not work for ASP.NET Core or Web API. So, I wouldn't use it. The example I'll be giving will work for ALL ASP.NET applications. This same code flow can be used for any of the Google APIs you've enabled as it's dependent on the scopes you are requesting.
Also, I am assuming you have your application set up in your Google Developer dashboard. That is to say that you have created an application, enabled the necessary YouTube APIs, created a Web Application Client, and set your allowed redirect urls properly.
The flow will work like this:
The user clicks a button (e.g. Add YouTube)
The View calls a method on the Controller to obtain an Authorization URL
On the controller method, we ask Google to give us an Authorization URL based on our client credentials (the ones created in the Google Developer Dashboard) and provide Google with a Redirect URL for our application (this Redirect URL must be in your list of accepted Redirect URLs for your Google Application)
Google gives us back an Authorization URL
We redirect the user to that Authorization URL
User grants our application access
Google gives our application back a special access code using the Redirect URL we provided Google on the request
We use that access code to get the Oauth tokens for the user
We save the Oauth tokens for the user
You need the following NuGet Packages
Google.Apis
Google.Apis.Auth
Google.Apis.Core
Google.apis.YouTube.v3
The Model
public class ExampleModel
{
public bool UserHasYoutubeToken { get; set; }
}
The Controller
public class ExampleController : Controller
{
// I'm assuming you have some sort of service that can read users from and update users to your database
private IUserService userService;
public ExampleController(IUserService userService)
{
this.userService = userService;
}
public async Task<IActionResult> Index()
{
var userId = // Get your user's ID however you get it
// I'm assuming you have some way of knowing if a user has an access token for YouTube or not
var userHasToken = this.userService.UserHasYoutubeToken(userId);
var model = new ExampleModel { UserHasYoutubeToken = userHasToken }
return View(model);
}
// This is a method we'll use to obtain the authorization code flow
private AuthorizationCodeFlow GetGoogleAuthorizationCodeFlow(params string[] scopes)
{
var clientIdPath = #"C:\Path\To\My\client_id.json";
using (var fileStream = new FileStream(clientIdPath, FileMode.Open, FileAccess.Read))
{
var clientSecrets = GoogleClientSecrets.Load(stream).Secrets;
var initializer = new GoogleAuthorizationCodeFlow.Initializer { ClientSecrets = clientSecrets, Scopes = scopes };
var googleAuthorizationCodeFlow = new GoogleAuthorizationCodeFlow(initializer);
return googleAuthorizationCodeFlow;
}
}
// This is a route that your View will call (we'll call it using JQuery)
[HttpPost]
public async Task<string> GetAuthorizationUrl()
{
// First, we need to build a redirect url that Google will use to redirect back to the application after the user grants access
var protocol = Request.IsHttps ? "https" : "http";
var redirectUrl = $"{protocol}://{Request.Host}/{Url.Action(nameof(this.GetYoutubeAuthenticationToken)).TrimStart('/')}";
// Next, let's define the scopes we'll be accessing. We are requesting YouTubeForceSsl so we can manage a user's YouTube account.
var scopes = new[] { YouTubeService.Scope.YoutubeForceSsl };
// Now, let's grab the AuthorizationCodeFlow that will generate a unique authorization URL to redirect our user to
var googleAuthorizationCodeFlow = this.GetGoogleAuthorizationCodeFlow(scopes);
var codeRequestUrl = googleAuthorizationCodeFlow.CreateAuthorizationCodeRequest(redirectUrl);
codeRequestUrl.ResponseType = "code";
// Build the url
var authorizationUrl = codeRequestUrl.Build();
// Give it back to our caller for the redirect
return authorizationUrl;
}
public async Task<IActionResult> GetYoutubeAuthenticationToken([FromQuery] string code)
{
if(string.IsNullOrEmpty(code))
{
/*
This means the user canceled and did not grant us access. In this case, there will be a query parameter
on the request URL called 'error' that will have the error message. You can handle this case however.
Here, we'll just not do anything, but you should write code to handle this case however your application
needs to.
*/
}
// The userId is the ID of the user as it relates to YOUR application (NOT their Youtube Id).
// This is the User ID that you assigned them whenever they signed up or however you uniquely identify people using your application
var userId = // Get your user's ID however you do (whether it's on a claim or you have it stored in session or somewhere else)
// We need to build the same redirect url again. Google uses this for validaiton I think...? Not sure what it's used for
// at this stage, I just know we need it :)
var protocol = Request.IsHttps ? "https" : "http";
var redirectUrl = $"{protocol}://{Request.Host}/{Url.Action(nameof(this.GetYoutubeAuthenticationToken)).TrimStart('/')}";
// Now, let's ask Youtube for our OAuth token that will let us do awesome things for the user
var scopes = new[] { YouTubeService.Scope.YoutubeForceSsl };
var googleAuthorizationCodeFlow = this.GetYoutubeAuthorizationCodeFlow(scopes);
var token = await googleAuthorizationCodeFlow.ExchangeCodeForTokenAsync(userId, code, redirectUrl, CancellationToken.None);
// Now, you need to store this token in rlation to your user. So, however you save your user data, just make sure you
// save the token for your user. This is the token you'll use to build up the UserCredentials needed to act on behalf
// of the user.
var tokenJson = JsonConvert.SerializeObject(token);
await this.userService.SaveUserToken(userId, tokenJson);
// Now that we've got access to the user's YouTube account, let's get back
// to our application :)
return RedirectToAction(nameof(this.Index));
}
}
The View
#using YourApplication.Controllers
#model YourApplication.Models.ExampleModel
<div>
#if(Model.UserHasYoutubeToken)
{
<p>YAY! We have access to your YouTube account!</p>
}
else
{
<button id="addYoutube">Add YouTube</button>
}
</div>
<script>
$(document).ready(function () {
var addYoutubeUrl = '#Url.Action(nameof(ExampleController.GetAuthorizationUrl))';
// When the user clicks the 'Add YouTube' button, we'll call the server
// to get the Authorization URL Google built for us, then redirect the
// user to it.
$('#addYoutube').click(function () {
$.post(addYoutubeUrl, function (result) {
if (result) {
window.location.href = result;
}
});
});
});
</script>
As referred here, you need to specify a fix port for the ASP.NET development server like How to fix a port number in asp.NET development server and add this url with the fix port to the allowed urls. Also as stated in this thread, when your browser redirects the user to Google's oAuth page, you should be passing as a parameter the redirect URI you want Google's server to return to with the token response.
I noticed that there is easy non-programmatic way around.
If you have typical monotlith application built in typical MS convention(so not compatible with 12factor and typical DDD) there is an option to tell your Proxy WWW server to rewrite all requests from HTTP to HTTPS so even if you have set up Web App on http://localhost:5000 and then added in Google API url like: http://your.domain.net/sigin-google, it will work perfectly and it is not that bas because it is much safer to set up main WWW to rewrite all to HTTPS.
It is not very good practice I guess however it makes sense and does the job.
I've struggled with this issue for hours in a .net Core application. What finally fixed it for me was, in the Google developers console, to create and use a credential for "Desktop app" instead of a "Web application".
Yeah!! Using credentials of desktop app instead of web app worked for me fine. It took me more than 2 days to figure out this problem. The main problem is that google auth library dose not adding or supporting http://localhost:8000 as redirect uri for web app creds but credentials of desktop app fixed that issue. Cause its supporting http://___ connection instead of https: connection for redirect uri
I'm developing an app for iOS and Android that uses Facebook to login. The users will login on their phones using their Facebook credentials and I use Facebook's GraphAPI to authenticate them. I do not want to store their email/password unless I absolutely have to.
After authentication, I can get a myriad of information from Facebook but the one that's of most interest to my question is the access token's authorization token.
Since my app has a server side component, I also need to validate that this access token is valid on the server side (so given the access token and the Facebook user id, i should be able to validate this client), otherwise the entirety of using Facebook to authenticate users is pointless as I would need to also store username/password of the users myself.
My thought was to send the userId and the access token via SSL to my server and then use a library to validate that these tokens are valid and the user is indeed who it says it is in order to proceed with DB access and everything else server related.
I am however having a hard time finding a library in .NET that does not use ASP.NET.
Is there any library out there that can do this simple validation (given an authorization token and a user id, tell me if the user is logged in to Facebook and if so, how long the token is valid for) that does not need to inject 20 different DLLs and does not rely on ASP.NET?
I've had a look at DotNetOpenAuth but (1) it seems to need quite a few DLLs to operate which is kind of fine on its own although not ideal and (2) it seems to rely on ASP.NET and microsoft libraries that I would strongly like to avoid.
I'm running my server on Mono and would ideally like to avoid doing anything with ASP.NET since they have proven to be very unstable in the past.
Many thanks,
You might want to try a service like https://oauth.io/home which handles that oAUth stuff for you. According to the docs once you set it up you can simply use rest to make authenticated calls. http://docs.oauth.io/#simple-server-side-authorization
Ok I found an easy way to do it.
First, I downloaded their .Net library from NuGet:
<package id="Facebook" version="7.0.6" targetFramework="net40" />
Then here's the process in order to authenticate users.
Step 1
Get the server's Access Token (this has to be done once at the startup of the service)
var client = new FacebookClient
{
AppId = appId, // get this from developer.facebook
AppSecret = appSecret, // get this from developer.facebook
};
dynamic appTokenQueryResponse = client.Get("oauth/access_token"
, new
{
client_id = appId,
client_secret = appSecret,
grant_type = "client_credentials"
});
_appAccessToken = appTokenQueryResponse.access_token;
Step 2
With the server access token, We're able to make the appropriate calls into the API in order to make sure the token is valid.
private FacebookAuthorizationResponse AuthorizeUser(FacebookClient client, string userId, string accessToken)
{
dynamic expirationToken = client.Get("debug_token", new
{
input_token = accessToken,
access_token = _appAccessToken
});
DateTime expiresAt = DateTimeConvertor.FromUnixTime(expirationToken.data.expires_at);
bool isValid = expirationToken.data.is_valid;
if (!isValid)
{
return new FacebookAuthorizationResponse
{
IsAuthorized = false,
};
}
dynamic response = client.Get(userId, new
{
access_token = accessToken,
fields = "id,name"
});
return new FacebookAuthorizationResponse
{
IsAuthorized = isValid,
ExpiresAt = expiresAt,
Name = response.name
};
}
Where
public class FacebookAuthorizationResponse
{
public bool IsAuthorized { get; set; }
public DateTime ExpiresAt { get; set; }
public string Name { get; set; }
}
I have set a spreadsheet to public which I assume would mean a user shouldn't need authorization to access and make changes to it, I should only need to provide my client id and secret? (I'm the only person who will be using this app and the spreadsheet is on my own Google account which is also the owner of the app)
I went through the documentation here: https://developers.google.com/google-apps/spreadsheets/?hl=en
My code works perfectly - it basically just updates a single cell in a spreadsheet with a function and then returns the value of that cell.
The issue is, I don't want to have to keep authorizing through the webpage. Is it possible to skip the need to authorize? Or at least authorize through code automatically instead of manually doing it through a webpage?
using Google.GData.Client;
using Google.GData.Spreadsheets;
namespace Spreadsheet{
class Program{
static void Main(){
OAuth2Parameters parameters = new OAuth2Parameters();
parameters.ClientId = "client-id-here";
parameters.ClientSecret = "client-secret-here";
parameters.RedirectUri = "urn:ietf:wg:oauth:2.0:oob"; //I'm not even sure what this is, I assume it's only necessary for web based applications
parameters.Scope = "https://spreadsheets.google.com/feeds https://docs.google.com/feeds";
//This is where the user is required to navigate to a page and retrieve access code
string authorizationUrl = OAuthUtil.CreateOAuth2AuthorizationUrl(parameters);
parameters.AccessCode = Console.ReadLine();
OAuthUtil.GetAccessToken(parameters);
string accessToken = parameters.AccessToken;
GOAuth2RequestFactory requestFactory =
new GOAuth2RequestFactory(null, "Spreadsheet", parameters);
SpreadsheetsService service = new SpreadsheetsService("Spreadsheet");
service.RequestFactory = requestFactory;
//spreadsheet related code here..
}
}
}
Where is this script running? The code sample you are using tries to get a token every time you run it. You have two options
If this code runs on a server and it can store the refresh token securely then, manually get a refresh token and change the script to just get a new access token (using that refresh token) to do the update.
Change to using a service account. Service accounts are built to handle these kind of use cases. You get a service account and in the spreadsheet give access to service account (share with it) and using service account you make a request to get an access token that you can use.
I'd like to be able to authenticate myself (my profile, not just my app) on my own web application using the Facebook C# SDK. Using the Graph API, I can get an access token, but that token does not seem to work properly with the Facebook C# as it seems to be stateless.
The error that is thrown is:
(OAuthException) An active access token must be used to query information about the current user.
I've poked around the Facebook C# SDK and documentation and most of the info I'm seeing is to redirect users to a login page which is not what I'm looking for.
Does anyone have a good sample of auto-logging in myself so I can pull up my own information?
TIA
When you say "yourself" do you mean the app or your actual facebook user?
If it's just your app, you can get an access token by POSTing to this URL:
https://graph.facebook.com/oauth/access_token?grant_type=client_credentials&client_id=APP_ID_HERE&client_secret=APP_SECRET_HERE
You can use this access token to perform actions on behalf of your users if they have authorized your app to do so.
I had the same problem where the access token didn't include the session part. Please check out my answer to this similar question - exchange code for token facebook-c#-sdk.
Here's a sample from my Home controller
[CanvasAuthorize]
public ActionResult Index()
{
var app = new FacebookClient(new Authorizer().Session.AccessToken);
dynamic me = app.Get("me");
ViewBag.Firstname = me.first_name;
ViewBag.Lastname = me.last_name;
return View();
}
Edit
Now I understand the question better. What about this?
var auth = new Authorizer(FacebookContext.Current.AppId, FacebookContext.Current.AppSecret, HttpContext);
auth.Authorize();
From the documentation:
public bool Authorize()
Member of Facebook.Web.Authorizer
Summary:
Authorizes the user if the user is not logged in or the application does not have all the sepcified permissions.
Returns:
Return true if the user is authenticated and the application has all the specified permissions.
I dont know if this will work for you:
using Facebook.Web;
using Facebook;
using System.Dynamic;
var auth = new CanvasAuthorizer { Permissions = new[] { "user_about_me"} };
if (auth.Authorize())
{
}
and include this in the aspx:
<input type="hidden" name="signed_request" value="<%: Request.Params["signed_request"]%>"/>
good luck !!