I want the date and the name from the select query which if I run as normal query I get the results but i when I try to get the results in C# all I get is count=0. Can anyone tell me what wrong am I doing?
Here is the C# code
private List<CertificationSummary> GetLastAccessData (string taskOwner)
{
List<CertificationSummary> lastAccessedResult = new List<CertificationSummary>();
string connectionString = SqlPlusHelper.GetConnectionStringByName("MetricRepositoryDefault");
using (SqlConnection connection = new SqlConnection(connectionString))
{
SqlParameter[] sqlParams = new SqlParameter[1];
sqlParams[0] = new SqlParameter("#taskOwner", SqlDbType.NVarChar);
sqlParams[0].Value = taskOwner;
connection.Open();
SqlCommand cmd = connection.CreateCommand();
cmd.CommandType = CommandType.StoredProcedure;
cmd.CommandText = "GetLastAccessedCertificationData";
cmd.Parameters.AddRange(sqlParams);
cmd.ExecuteNonQuery();
}
return lastAccessedResult;
}
And here is the stored procedure:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[GetLastAccessedCertificationData]
(#taskOwner nvarchar(255))
AS
BEGIN
DECLARE #name nvarchar(100)
DECLARE #lastAccessedDate [datetime]
SELECT #name = Name
FROM CertificationReviewCycles
INNER JOIN UserReviewCycleAccess ON CertificationReviewCycles.CertificationReviewCycleID = UserReviewCycleAccess.LastAccessedReviewCycleID
WHERE USERID = #taskOwner
SELECT #lastAccessedDate = LastAccessedDate
FROM UserReviewCycleAccess
WHERE UserID = #taskOwner
CREATE TABLE #tempTable
(
name [nvarchar](255) NULL,
[LastAccessedDate] [datetime] NULL,
)
INSERT INTO #tempTable VALUES (#name, #lastAccessedDate)
SELECT TOP(1) name, LastAccessedDate
FROM #tempTable
END
GO
You are returning lastAccessedResult which is has just been set to new List<CertificationSummary>(). This list has no items, so it has a count of 0.
Use ExecuteReader instead of ExecuteNonQuery and you can then read the data returned and store them into your lastAccessedResult list.
Read here for more info.
ExecuteNonQuery will not return results, and should only be used when you don't expect rows back. This is common for UPDATE statements.
Since you're interested in reading the rows returned by the stored procedure, use ExecuteReader, e.g var reader = cmd.ExecuteReader();
See here for more:
https://learn.microsoft.com/en-us/dotnet/api/system.data.sqlclient.sqldatareader?view=dotnet-plat-ext-3.1
You're using ExecuteNonQuery, which discards any grids from the query. You need to use ExecuteReader to consume grids, but it is a lot of mess and ceremony - the API is verbose. Frankly, I'd recommend a tool like "Dapper" (freely available on NuGet), then this becomes just
private List<CertificationSummary> GetLastAccessData (string taskOwner)
{
string connectionString = SqlPlusHelper.GetConnectionStringByName("MetricRepositoryDefault");
using var connection = new SqlConnection(connectionString);
return connection.Query<CertificationSummary>(
"GetLastAccessedCertificationData",
new { taskOwner }, // <== parameters
commandType: CommandType.StoredProcedure).AsList();
}
What I need:
In PLS/SQL on an Oracle DB, create a stored procedure or function with parameters, which given a declared table of , where is a ROW of a table (with all the fields), returns the resultset following the conditions given in the parameters. After, I need to call them from Microsoft Entity Framework with edmx file.
Basically the need is to being able to provide a quick report of the table contents into a pdf, matching some filters, with an oracle db.
The mantainer must be able, provided a script I give, to create and add new reports, so this needs to be dynamic.
Here's what I've got so far:
CREATE OR REPLACE type THETABLEIWANTTYPE as table of THETABLEIWANT%TYPE
create function
SCHEMA.THETABLEIWANT_FUNCTION(PARAM_GR in number default 1)
return THETABLEIWANTTYPE
PIPELINED
as
result_table THETABLEIWANTTYPE
begin
SELECT S.id, S.idg, S.sta, S.tab
Bulk collect into result_table
from SCHEMA.THETABLEIWANT S
WHERE IDGR = PARAM_GR
IF result_table.count > 0 THEN
for i in result_table.FIRST .. result_table.LAST loop
pipe row (result_table(i))
end loop
end if
return
end;
But it's not working. It gives errors.
Running CREATE TYPE I get:
Compilation errors for TYPE SCHEMA.THETABLEIWANT
Error: PLS-00329: schema-level type has illegal reference to
SCHEMA.THETABLEIWANT
The mantainer will launch the script creating a TYPE of the row of the table I need, then the function should return a table with the records.
Then calling it from Entity Framework I should be able to execute it like I'm calling a normal select from my table, IE:
``_dbContext.THETABLEIWANT.Where(x => x.IDGR = Param_gr).ToList();
The problem is that mantainers should be able to generate new kind of reports with any select inside without the need of my intervention on the software code.
Any hint?
It's ok also to bulk all the select result into a temp table but it has to be dynamic as column will be changing
I ended up to write a PLS/SQL procedure that returns a cursor and managing it from C# code with Oracle.ManagedDataAccess Library.
Here's the procedure, for anyone interested:
CREATE OR REPLACE PROCEDURE SCHEMA.PROC_NAME(
PARAM_1 VARCHAR2,
RESULT OUT SYS_REFCURSOR)
IS
BEGIN
OPEN RESULT FOR
SELECT A, V, C AS MY_ALIAS from SCHEMA.TABLE WHERE FIELD = PARAM_1 AND FIELD_2 = 'X';
END;
And here's the C# code for calling and getting the result:
OracleConnection conn = new OracleConnection("CONNECTIONSTRING");
try
{
if (conn.State != ConnectionState.Open)
conn.Open();
List<OracleParameter> parametri = new List<OracleParameter>()
{
new OracleParameter
{
ParameterName = nameof(filter.PARAM_1),
Direction = ParameterDirection.Input,
OracleDbType = OracleDbType.NVarchar2,
Value = filter.PARAM_1
}
};
OracleCommand cmd = conn.CreateCommand();
cmd.Parameters.AddRange(parametri.ToArray());
OracleParameter cursor = cmd.Parameters.Add(
new OracleParameter
{
ParameterName = "RESULT",
Direction = ParameterDirection.Output,
OracleDbType = OracleDbType.RefCursor
}
);
cmd.CommandText = procedureName;
cmd.CommandType = CommandType.StoredProcedure;
cmd.ExecuteNonQuery();
using (OracleDataReader reader = ((OracleRefCursor)cursor.Value).GetDataReader())
{
if (reader.HasRows)
while (reader.Read())
{
//Iterate the result set
}
}
}
catch(Exception ex)
{
//Manage exception
}
I have this code:
string insertSql =
"INSERT INTO aspnet_GameProfiles(UserId,GameId) VALUES(#UserId, #GameId)";
using (SqlConnection myConnection = new SqlConnection(myConnectionString))
{
myConnection.Open();
SqlCommand myCommand = new SqlCommand(insertSql, myConnection);
myCommand.Parameters.AddWithValue("#UserId", newUserId);
myCommand.Parameters.AddWithValue("#GameId", newGameId);
myCommand.ExecuteNonQuery();
myConnection.Close();
}
When I insert into this table, I have an auto_increment int primary key column called GamesProfileId, how can i get the last inserted one after this so I can use that id to insert into another table?
For SQL Server 2005+, if there is no insert trigger, then change the insert statement (all one line, split for clarity here) to this
INSERT INTO aspnet_GameProfiles(UserId,GameId)
OUTPUT INSERTED.ID
VALUES(#UserId, #GameId)
For SQL Server 2000, or if there is an insert trigger:
INSERT INTO aspnet_GameProfiles(UserId,GameId)
VALUES(#UserId, #GameId);
SELECT SCOPE_IDENTITY()
And then
Int32 newId = (Int32) myCommand.ExecuteScalar();
You can create a SqlCommand with CommandText equal to
INSERT INTO aspnet_GameProfiles(UserId, GameId) OUTPUT INSERTED.ID VALUES(#UserId, #GameId)
and execute int id = (int)command.ExecuteScalar.
This MSDN article will give you some additional techniques.
string insertSql =
"INSERT INTO aspnet_GameProfiles(UserId,GameId) VALUES(#UserId, #GameId)SELECT SCOPE_IDENTITY()";
int primaryKey;
using (SqlConnection myConnection = new SqlConnection(myConnectionString))
{
myConnection.Open();
SqlCommand myCommand = new SqlCommand(insertSql, myConnection);
myCommand.Parameters.AddWithValue("#UserId", newUserId);
myCommand.Parameters.AddWithValue("#GameId", newGameId);
primaryKey = Convert.ToInt32(myCommand.ExecuteScalar());
myConnection.Close();
}
This will work.
I had the same need and found this answer ..
This creates a record in the company table (comp), it the grabs the auto ID created on the company table and drops that into a Staff table (staff) so the 2 tables can be linked, MANY staff to ONE company. It works on my SQL 2008 DB, should work on SQL 2005 and above.
===========================
CREATE PROCEDURE [dbo].[InsertNewCompanyAndStaffDetails]
#comp_name varchar(55) = 'Big Company',
#comp_regno nchar(8) = '12345678',
#comp_email nvarchar(50) = 'no1#home.com',
#recID INT OUTPUT
-- The '#recID' is used to hold the Company auto generated ID number that we are about to grab
AS
Begin
SET NOCOUNT ON
DECLARE #tableVar TABLE (tempID INT)
-- The line above is used to create a tempory table to hold the auto generated ID number for later use. It has only one field 'tempID' and its type INT is the same as the '#recID'.
INSERT INTO comp(comp_name, comp_regno, comp_email)
OUTPUT inserted.comp_id INTO #tableVar
-- The 'OUTPUT inserted.' line above is used to grab data out of any field in the record it is creating right now. This data we want is the ID autonumber. So make sure it says the correct field name for your table, mine is 'comp_id'. This is then dropped into the tempory table we created earlier.
VALUES (#comp_name, #comp_regno, #comp_email)
SET #recID = (SELECT tempID FROM #tableVar)
-- The line above is used to search the tempory table we created earlier where the ID we need is saved. Since there is only one record in this tempory table, and only one field, it will only select the ID number you need and drop it into '#recID'. '#recID' now has the ID number you want and you can use it how you want like i have used it below.
INSERT INTO staff(Staff_comp_id)
VALUES (#recID)
End
-- So there you go. You can actually grab what ever you want in the 'OUTPUT inserted.WhatEverFieldNameYouWant' line and create what fields you want in your tempory table and access it to use how ever you want.
I was looking for something like this for ages, with this detailed break down, I hope this helps.
In pure SQL the main statement kools like:
INSERT INTO [simbs] ([En]) OUTPUT INSERTED.[ID] VALUES ('en')
Square brackets defines the table simbs and then the columns En and ID, round brackets defines the enumeration of columns to be initiated and then the values for the columns, in my case one column and one value. The apostrophes enclose a string
I will explain you my approach:
It might be not easy to understand but i hope useful to get the big picture around using the last inserted id. Of course there are alternative easier approaches. But I have reasons to keep mine. Associated functions are not included, just their names and parameter names.
I use this method for medical artificial intelligence
The method check if the wanted string exist in the central table (1). If the wanted string is not in the central table "simbs", or if duplicates are allowed, the wanted string is added to the central table "simbs" (2). The last inseerted id is used to create associated table (3).
public List<int[]> CreateSymbolByName(string SymbolName, bool AcceptDuplicates)
{
if (! AcceptDuplicates) // check if "AcceptDuplicates" flag is set
{
List<int[]> ExistentSymbols = GetSymbolsByName(SymbolName, 0, 10); // create a list of int arrays with existent records
if (ExistentSymbols.Count > 0) return ExistentSymbols; //(1) return existent records because creation of duplicates is not allowed
}
List<int[]> ResultedSymbols = new List<int[]>(); // prepare a empty list
int[] symbolPosition = { 0, 0, 0, 0 }; // prepare a neutral position for the new symbol
try // If SQL will fail, the code will continue with catch statement
{
//DEFAULT und NULL sind nicht als explizite Identitätswerte zulässig
string commandString = "INSERT INTO [simbs] ([En]) OUTPUT INSERTED.ID VALUES ('" + SymbolName + "') "; // Insert in table "simbs" on column "En" the value stored by variable "SymbolName"
SqlCommand mySqlCommand = new SqlCommand(commandString, SqlServerConnection); // initialize the query environment
SqlDataReader myReader = mySqlCommand.ExecuteReader(); // last inserted ID is recieved as any resultset on the first column of the first row
int LastInsertedId = 0; // this value will be changed if insertion suceede
while (myReader.Read()) // read from resultset
{
if (myReader.GetInt32(0) > -1)
{
int[] symbolID = new int[] { 0, 0, 0, 0 };
LastInsertedId = myReader.GetInt32(0); // (2) GET LAST INSERTED ID
symbolID[0] = LastInsertedId ; // Use of last inserted id
if (symbolID[0] != 0 || symbolID[1] != 0) // if last inserted id succeded
{
ResultedSymbols.Add(symbolID);
}
}
}
myReader.Close();
if (SqlTrace) SQLView.Log(mySqlCommand.CommandText); // Log the text of the command
if (LastInsertedId > 0) // if insertion of the new row in the table was successful
{
string commandString2 = "UPDATE [simbs] SET [IR] = [ID] WHERE [ID] = " + LastInsertedId + " ;"; // update the table by giving to another row the value of the last inserted id
SqlCommand mySqlCommand2 = new SqlCommand(commandString2, SqlServerConnection);
mySqlCommand2.ExecuteNonQuery();
symbolPosition[0] = LastInsertedId; // mark the position of the new inserted symbol
ResultedSymbols.Add(symbolPosition); // add the new record to the results collection
}
}
catch (SqlException retrieveSymbolIndexException) // this is executed only if there were errors in the try block
{
Console.WriteLine("Error: {0}", retrieveSymbolIndexException.ToString()); // user is informed about the error
}
CreateSymbolTable(LastInsertedId); //(3) // Create new table based on the last inserted id
if (MyResultsTrace) SQLView.LogResult(LastInsertedId); // log the action
return ResultedSymbols; // return the list containing this new record
}
I tried the above but they didn't work, i found this thought, that works a just fine for me.
var ContactID = db.GetLastInsertId();
Its less code and i easy to put in.
Hope this helps someone.
You can also use a call to SCOPE_IDENTITY in SQL Server.
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Linq;
using System.Text;
using System.Windows.Forms;
using System.Data.SqlClient;
namespace DBDemo2
{
public partial class Form1 : Form
{
string connectionString = "Database=company;Uid=sa;Pwd=mypassword";
System.Data.SqlClient.SqlConnection connection;
System.Data.SqlClient.SqlCommand command;
SqlParameter idparam = new SqlParameter("#eid", SqlDbType.Int, 0);
SqlParameter nameparam = new SqlParameter("#name", SqlDbType.NChar, 20);
SqlParameter addrparam = new SqlParameter("#addr", SqlDbType.NChar, 10);
public Form1()
{
InitializeComponent();
connection = new System.Data.SqlClient.SqlConnection(connectionString);
connection.Open();
command = new System.Data.SqlClient.SqlCommand(null, connection);
command.CommandText = "insert into employee(ename, city) values(#name, #addr);select SCOPE_IDENTITY();";
command.Parameters.Add(nameparam);
command.Parameters.Add(addrparam);
command.Prepare();
}
private void Form1_Load(object sender, EventArgs e)
{
}
private void buttonSave_Click(object sender, EventArgs e)
{
try
{
int id = Int32.Parse(textBoxID.Text);
String name = textBoxName.Text;
String address = textBoxAddress.Text;
command.Parameters[0].Value = name;
command.Parameters[1].Value = address;
SqlDataReader reader = command.ExecuteReader();
if (reader.HasRows)
{
reader.Read();
int nid = Convert.ToInt32(reader[0]);
MessageBox.Show("ID : " + nid);
}
/*int af = command.ExecuteNonQuery();
MessageBox.Show(command.Parameters["ID"].Value.ToString());
*/
}
catch (NullReferenceException ne)
{
MessageBox.Show("Error is : " + ne.StackTrace);
}
catch (Exception ee)
{
MessageBox.Show("Error is : " + ee.StackTrace);
}
}
private void buttonSave_Leave(object sender, EventArgs e)
{
}
private void Form1_Leave(object sender, EventArgs e)
{
connection.Close();
}
}
}
There are all sorts of ways to get the Last Inserted ID but the easiest way I have found is by simply retrieving it from the TableAdapter in the DataSet like so:
<Your DataTable Class> tblData = new <Your DataTable Class>();
<Your Table Adapter Class> tblAdpt = new <Your Table Adapter Class>();
/*** Initialize and update Table Data Here ***/
/*** Make sure to call the EndEdit() method ***/
/*** of any Binding Sources before update ***/
<YourBindingSource>.EndEdit();
//Update the Dataset
tblAdpt.Update(tblData);
//Get the New ID from the Table Adapter
long newID = tblAdpt.Adapter.InsertCommand.LastInsertedId;
Hope this Helps ...
After inserting any row you can get last inserted id by below line of query.
INSERT INTO aspnet_GameProfiles(UserId,GameId)
VALUES(#UserId, #GameId);
SELECT ##IDENTITY
If you're using executeScalar:
cmd.ExecuteScalar();
result_id=cmd.LastInsertedId.ToString();
Maybe this answer helps as well as my database seems to have no column specified as "IDENTITY" (which is needed for "SELECT SCOPE_IDENTITY()" or "##IDENTITY" calls). Also my "ID" column was of type "binary(16)" so I needed to convert the output like stated below:
string returnId = BitConverter.ToString((byte[])cmd.ExecuteScalar()).Replace("-", "");
// skip the replace if you handle the hyphen otherwise
Use SELECT SCOPE_IDENTITY() in query
After this:
INSERT INTO aspnet_GameProfiles(UserId, GameId) OUTPUT INSERTED.ID VALUES(#UserId, #GameId)
Execute this
int id = (int)command.ExecuteScalar;
It will work
INSERT INTO aspnet_GameProfiles(UserId,GameId) VALUES(#UserId, #GameId)";
then you can just access to the last id by ordering the table in desc way.
SELECT TOP 1 UserId FROM aspnet_GameProfiles ORDER BY UserId DESC.
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
CREATE PROC [dbo].[spCountNewLastIDAnyTableRows]
(
#PassedTableName as NVarchar(255),
#PassedColumnName as NVarchar(225)
)
AS
BEGIN
DECLARE #ActualTableName AS NVarchar(255)
DECLARE #ActualColumnName as NVarchar(225)
SELECT #ActualTableName = QUOTENAME( TABLE_NAME )
FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_NAME = #PassedTableName
SELECT #ActualColumnName = QUOTENAME( COLUMN_NAME )
FROM INFORMATION_SCHEMA.COLUMNS
WHERE COLUMN_NAME = #PassedColumnName
DECLARE #sql AS NVARCHAR(MAX)
SELECT #sql = 'select MAX('+ #ActualColumnName + ') + 1 as LASTID' + ' FROM ' + #ActualTableName
EXEC(#SQL)
END
MySql Procedure Code:
CREATE DEFINER=`root`#`localhost` PROCEDURE `USP_CreateCliente`(IN nome_cliente VARCHAR(45))
BEGIN
Select 20;
INSERT INTO clienti ( nome_cliente )
VALUES ( nome_cliente );
Select id_cliente from clienti;
END
C# code in the controller page:
ClienteInfo CI = new ClienteInfo();
DboUser objdbo = new DboUser();
int id_cliente = 0;
CI.nome_cliente = txtNomeCliente.Text;
id_cliente = objdbo.CreateClienteInfo(CI);
DboUser class:
public int CreateClienteInfo(ClienteInfo CI)
{
int result;
MySqlConnection conn = new MySqlConnection();
DbConnection db = new DbConnection();
conn = db.ConnessioneDb();
MySqlCommand cmd = new MySqlCommand(Costanti.StoredProcedures.USP_CreateCliente, conn);
cmd.CommandType = CommandType.StoredProcedure;
cmd.Parameters.AddWithValue("#nome_cliente", CI.nome_cliente);
result = cmd.ExecuteNonQuery();
conn.Close();
return result;
}
I want my C# code to retrieve the id of my customer after inserting it into the database, so I can save it to the session and retrieve it again later in a page that will print a document with the customer's informations.
My id_cliente returns 0, do you notice any syntax error?
Did I do something wrong?
I'm 90% sure it's a problem dealing with the stored precedure tough, cause the customer is inserted correctly
Change this line
result = cmd.ExecuteNonQuery();
to
result = Convert.ToInt32(cmd.ExecuteScalar());
but you should also change your stored procedure because it doesn't return the last id generated for you by the AUTO_INCREMENT column id_cliente
CREATE DEFINER=`root`#`localhost` PROCEDURE `USP_CreateCliente`(IN nome_cliente VARCHAR(45))
BEGIN
INSERT INTO clienti ( nome_cliente ) VALUES ( nome_cliente );
Select LAST_INSERT_ID();
END
In MySql, to get the generated auto_increment value, you could use LAST_INSERT_ID(), next, your C# code don't need to use ExecuteNonQuery, which returns just the number of rows that you have changed, added or deleted, but you use ExecuteScalar which returns the first column of the first row of the last SELECT command executed by your stored procedure. (It is the SELECT LAST_INSERT_ID())
Also, to complete the answer, you don't really need a stored procedure for this kind of simple work. The advantages should be minimal while the problems related to a different piece of software to maintain are self evident.
Your C# code could be (removed the usage of your DbConnection class because it is not clear what it does)
public int CreateClienteInfo(ClienteInfo CI)
{
int result;
string cmdText = #"INSERT INTO clienti ( nome_cliente ) VALUES ( nome_cliente );
Select LAST_INSERT_ID();";
using(MySqlConnection conn = new MySqlConnection(....connectionstring .....))
using(MySqlCommand cmd = new MySqlCommand(cmdText, conn);
{
conn.Open()
cmd.Parameters.AddWithValue("#nome_cliente", CI.nome_cliente);
result = Convert.ToInt32(cmd.ExecuteScalar())
return result;
}
}
Here you use the possibility to pass batch commands to your MySql engine, meaning two commandtexts with the same MySqlCommand separating them with the semicolon
I came across a problem while updating a typed DataTable that has a primary key column.
At some point in my code I fill DataTables (some of them have primary and foreign key columns) and then I insert the data of all DataTables in one transaction using DataAdapters and Update(). Because the typed DataTables do not allow the PrimaryKey table to be empty I insert some integer values in there. After calling Update() I expected the PK columns to be updated with the database PKs.
public void UpdateMethod(DbTransaction transaction)
{
DbDataAdapter dataAdapter = mDbProviderFactory.CreateDataAdapter();
using (DbCommand insertCommand = CreateCommand())
{
insertCommand.Connection = mDbConnection;
insertCommand.Transaction = transaction;
dataAdapter.InsertCommand = insertCommand;
dataAdapter.Update(dataTable);
}
// not sure if i need to do this:
dataTable.AcceptChanges();
// I would expect that databaseId is now the Id used in the database,
// but it is the original Id which I set while creating the row entry
databaseId = (int)dataTable.Rows[0]["Id"];
}
private DbCommand CreateCommand()
{
// Make command object.
DbCommand cmd = mDbProviderFactory.CreateCommand();
// add command input parameters
DbParameter parameter1 = mDbProviderFactory.CreateParameter();
parameter1.ParameterName = mDatabaseParameterPrefix + "someColumn";
parameter1.SourceColumn = "someColumn";
parameter1.Size = 255;
parameter1.DbType = DbType.String;
// Output parameter
DbParameter idParameter = mDbProviderFactory.CreateParameter();
idParameter.ParameterName = mDatabaseParameterPrefix + "ID";
idParameter.SourceColumn = "ID";
idParameter.Direction = ParameterDirection.InputOutput;
idParameter.DbType = DbType.Int32;
// setup sql command
cmd.Parameters.Add(parameter1);
cmd.Parameters.Add(idParameter)
cmd.CommandText = #"INSERT INTO [SomeTable] ([someColumn], ...) VALUES(#someColumn, ... ) SELECT CAST(SCOPE_IDENTITY() AS int) AS 'ID'";
cmd.UpdatedRowSource = UpdateRowSource.Both;
return cmd;
}
Thanks for any hints!
When you have a primary key set when you fill the datatable, it won't overwrite rows that already exist (however, if it comes across a matching primary key it may or may not update non-key elements depending on what your loadoption is set to)
You would have to clear your datatable first before you fill it I believe.
Solved it. The problem was the SQL statement: Instead of
INSERT INTO [SomeTable] ([someColumn], ...) VALUES(#someColumn, ... ) SELECT CAST(SCOPE_IDENTITY() AS int) AS 'ID'
It must be:
INSERT INTO [SomeTable] ([someColumn], ...) VALUES(#someColumn, ... ) SELECT #ID = SCOPE_IDENTITY()
Otherwise the value of the primary key is not assigned to the output parameter.