We Keep Coding

can't get text from clipboard | c#

It doesn't show me anything inside the logBox, it just stays blank
namespace Clipboard_Logger
{
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
backgroundWorker1.RunWorkerAsync();
}
private void textBox1_TextChanged(object sender, EventArgs e)
{
logBox.SelectionStart = logBox.TextLength;
logBox.ScrollToCaret();
}
private void backgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
{
while (true)
{
if (Clipboard.ContainsText(TextDataFormat.Text))
logBox.Text = logBox.Text + Clipboard.GetText(TextDataFormat.Text) + "\r\n";
}
}
}
}

You are using a background thread ( BackGroundWorker.DoWork ) to access controls on the UI thread. Controls can only be accessed from the UI thread.
Try adding a BackGroundWorker.ProgressChanged event and access your control from that. ProgressChanged runs from the UI thread.
Edit from your comment:
No, that's not what I meant, your're creating a new backgroundworker, you should use the existing one, like this:
private void backgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
{
backgroundWorker1.WorkerReportsProgress = true;
backgroundWorker1.ReportProgress(1);
}
Also, you need to copy text to the clipboard.

How to run a windows form from a backgroundworker runnig through another backgroundworker?

this is the simplified plan for a solution:
for some reasons i need to run a windows form through a backgroundworker that is runnig by another backgroundworker, when the new windows form loads, the older backgroundworker must pause. i write the code like this :
creating a class with name : temp
public class temp
{
static public BackgroundWorker backgroundWorker1 = new BackgroundWorker() { WorkerSupportsCancellation = true };
static public EventWaitHandle ew = new EventWaitHandle(false, EventResetMode.ManualReset);
static public BackgroundWorker back = new BackgroundWorker() { WorkerSupportsCancellation = true };
}
the codes for form1 are :
namespace WindowsFormsApplication1
{
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
private void Form1_Load(object sender, EventArgs e)
{
Control.CheckForIllegalCrossThreadCalls = false;
temp.backgroundWorker1.DoWork += new DoWorkEventHandler(backgroundWorker1_DoWork);
temp.back.DoWork += new DoWorkEventHandler(back_DoWork);
}
void back_DoWork(object sender, DoWorkEventArgs e)
{
Form2 f = new Form2();
f.Show();
}
private void button1_Click(object sender, EventArgs e)
{
temp.backgroundWorker1.RunWorkerAsync();
}
private void backgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
{
temp.back.RunWorkerAsync();
if (temp.backgroundWorker1.CancellationPending)
temp.ew.WaitOne();
}
}
}
and the codes of form2 goes here :
namespace WindowsFormsApplication1
{
public partial class Form2 : Form
{
public Form2()
{
InitializeComponent();
}
private void Form2_Load(object sender, EventArgs e)
{
temp.backgroundWorker1.CancelAsync();
temp.ew.Reset();
}
}
}
by clicking the button1 from form1 the temp.backgroundworker1 runs and then in the DoWork of temp.backgroundworker1, the temp.back runs and then FORM2 LOADS BUT THE FORM2 HANGS AND BECOMES USELESS AND YOU CANNOT USE THAT ANY MORE.
where did i wrong ?
the whole plan that i'm going to execute is :
we have a For loop that processes every row of a DataGridView.
each time in a certain point, another windowsform opens
and it stops the loop until the user inserts the information and then click on OK button, the windowsform closes and the loop keep on working. i dont know what to do.......
even if i dont cancel working of the temp.backgroundworker in form2load like the code below, the Form2 is useless
private void Form2_Load(object sender, EventArgs e)
{
}

Do not use any UI operation in the work thread (DoWork method). Maybe that's why you set the CheckForIllegalCrossThreadCalls property, but your app will not work properly just suppresses the error when the debugger is attached.
See my answer here for the correct usage of the BackgroundWorker (that is about canceling but you can see the operations in UI and worker thread).
In this particular case what you can use a similar volatile bool to sign the UI thread that the form can be shown. Or, if you want to send different messages between the threads, use a ConcurrentQueue<T> to write and read messages:
public partial class Form1 : Form
{
private enum Message
{
ShowForm2,
SuspendWork,
ResumeWork,
FinishWorker1
// ... and whatever you want
}
private Timer timer;
private ConcurrentQueue<Message> messagesToUI = new ConcurrentQueue<Message>();
private ConcurrentQueue<Message> messagesToWorker = new ConcurrentQueue<Message>();
public Form1()
{
InitializeComponent();
timer = new Timer(this);
timer.Interval = 10;
timer.Tick += PollUIMessages;
timer.Enabled = true;
}
void PollUIMessages(object sender, EventArgs e)
{
// do we have a new message?
Message message;
if (messagesToUI.TryDequeue(out message))
{
switch (message)
{
case Message.ShowForm2:
Form2 f = new Form2();
f.Show();
// todo: in Form2.Close add a Resume message to the messagesToWorker
break;
// ... process other messages
}
}
}
void back_DoWork(object sender, DoWorkEventArgs e)
{
// Here you are in the worker thread. You can send a message to the
// UI thread like this:
messagesToUI.Enqueue(Message.ShowForm2);
bool isWorking = true;
// and here you can poll the messages to the worker thread
while (true)
{
Message message;
if (!messagesToWorker.TryDequeue(out message))
{
// no message: idle or work
if (isWorking)
DoSomeWork(); // do whatever you want
else
Thread.CurrentThread.Sleep(10);
continue;
}
switch (message)
{
case Message.FinishWorker1:
// finishing the worker: jumping out
return;
case Message.SuspendWork:
isWorking = false;
break;
case Message.ResumeWork:
isWorking = true;
break;
}
}
}

Background Worker loading screen in Winforms

I have a Form where one can Sign In and it could take a while till the data gets loaded into the Form. So I wanted to create a seperate Form (loadScreen.cs) with a Progress Bar when the Form is loading. I tried this in the loadScreen.cs Form:
private void Form1_Load(object sender, EventArgs e)
{
worker = new BackgroundWorker();
worker.WorkerReportsProgress = true;
worker.WorkerSupportsCancellation = true;
worker.DoWork += new DoWorkEventHandler(worker_DoWork);
worker.ProgressChanged +=
new ProgressChangedEventHandler(worker_ProgressChanged);
worker.RunWorkerCompleted +=
new RunWorkerCompletedEventHandler(worker_RunWorkerCompleted);
}
void worker_DoWork(object sender, DoWorkEventArgs e)
{
int percentFinished = (int)e.Argument;
while (!worker.CancellationPending && percentFinished < 100)
{
percentFinished++;
worker.ReportProgress(percentFinished);
System.Threading.Thread.Sleep(50);
}
e.Result = percentFinished;
}
void worker_ProgressChanged(object sender, ProgressChangedEventArgs e)
{
progressBar1.Value = e.ProgressPercentage;
}
void worker_RunWorkerCompleted(object sender, RunWorkerCompletedEventArgs e)
{
this.Close();
}
I've read that the worker_DoWork method should have the code which takes longer to load. I don't know how to handle this since my button is in Form1. When it's clicked then I go to another class with
private void signIn_Click(object sender, EventArgs e)
{
var logIn = new LogIn(this);
logIn.checkUserInput(this);
}
and there I execute the operations which load certain things. How to connect everything? I need help!

I'm actually in the process of creating a general-purpose dialogue for this sort of thing. It's not going to be ready in time to be of use to you but I would suggest that you go along similar lines. Create your "Loading" dialogue so that it accepts a delegate and invokes it in the DoWork event handler. The main form can then contain a method that does the work and you can pass a delegate for that method to the dialogue. I'll post a very basic example.
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
private DataTable table;
private void button1_Click(object sender, EventArgs e)
{
var work = new Action(GetData);
using (var f2 = new Form2(work))
{
f2.ShowDialog();
this.dataGridView1.DataSource = this.table;
}
}
private void GetData()
{
this.table = new DataTable();
using (var adapter = new SqlDataAdapter("SELECT * FROM MyTable", "connectionstring here"))
{
adapter.Fill(table);
}
}
}
public partial class Form2 : Form
{
private Action work;
public Form2(Action work)
{
InitializeComponent();
this.work = work;
}
private void Form2_Load(object sender, EventArgs e)
{
this.backgroundWorker1.RunWorkerAsync();
}
private void backgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
{
this.work();
}
private void backgroundWorker1_RunWorkerCompleted(object sender, RunWorkerCompletedEventArgs e)
{
this.DialogResult = DialogResult.OK;
}
}
Note that there's no real way to measure progress when using a data adapter so you could only really display a marquee progress bar in this case.

Updating Windows Forms GUI while code is running

I've run into some problems while using progress bars in Windows Forms. Say I have an algorithm with ten parts that runs on a button click. After each part, I'd want to update a progress bar on the form to 10% further along. However, when code is running, the Windows Form will not respond or update.
What is the correct do show progress on a form while code is running?

You need to use a BackgroundWorker.
A nice example can be found here: http://www.dotnetperls.com/progressbar
using System.ComponentModel;
using System.Threading;
using System.Windows.Forms;
namespace WindowsFormsApplication1
{
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
private void Form1_Load(object sender, System.EventArgs e)
{
// Start the BackgroundWorker.
backgroundWorker1.RunWorkerAsync();
}
private void backgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
{
for (int i = 1; i <= 100; i++)
{
// Wait 100 milliseconds.
Thread.Sleep(100);
// Report progress.
backgroundWorker1.ReportProgress(i);
}
}
private void backgroundWorker1_ProgressChanged(object sender, ProgressChangedEventArgs e)
{
// Change the value of the ProgressBar to the BackgroundWorker progress.
progressBar1.Value = e.ProgressPercentage;
// Set the text.
this.Text = e.ProgressPercentage.ToString();
}
}
}
Or you can use something like:
private void StartButtonClick(object sender, EventArgs e)
{
var t1 = new Thread(() => ProgressBar(value));
t1.Start();
}
private void ProgressBar(value1)
{
ProgressBar.BeginInvoke(new MethodInvoker(delegate
{
ProgresBar.Value++
}));
}

I suggest use TPL for such operations as more standardized, lightweight, robust and extendable
See for ex.: http://blogs.msdn.com/b/pfxteam/archive/2010/10/15/10076552.aspx

updating gui from another class c#

hey i am new to c# plz help.
i am writing a program that sorts data in a file and it is a time consuming process so i thought that i should run it in a separate thread and since it has alot of step so i made a new class for it. the problem is that i want to show the progress in the main GUI and i know for that i have to use Invoke function but the problem is that the form control variables are not accessible it this class. what should i do ??????
sample code:
public class Sorter
{
private string _path;
public Sorter(string path)
{
_path = path;
}
public void StartSort()
{
try
{
processFiles(_path, "h4x0r"); // Just kidding
}
catch (Exception e)
{
MessageBox.Show("Error: " + e.ToString(), "Error", MessageBoxButtons.OK, MessageBoxIcon.Error);
}
}
private void processFiles(string Dir, string[] key)
{
/* sorting program */
}
and it is used as
public partial class Form1 : Form
{
Sorter sort;
public Form1()
{
InitializeComponent();
}
private void browseBtn_Click(object sender, EventArgs e)
{
if (folderBrowserDialog1.ShowDialog() == DialogResult.OK)
textBox1.Text = folderBrowserDialog1.SelectedPath;
}
private void startBtn_Click(object sender, EventArgs e)
{
if (startBtn.Text == "Start Sorting")
{
Thread worker = new Thread(new ThreadStart(delegate() {
sort = new Sorter(textBox1.Text);
sort.StartSort(); }));
worker.start();
}
else
MessageBox.Show("Cancel");//TODO: add cancelling code here
}
}
plz help..

Add an Event to your class that is doing the multi-threaded work, that triggers when the progress changes. Have your form subscribe to this event and update the progress bar.
Note ProgressEventArgs is a little class that inherits EventArgs and has an Integer for the progress.
// delegate to update progress
public delegate void ProgressChangedEventHandler(Object sender, ProgressEventArgs e);
// Event added to your worker class.
public event ProgressChangedEventHandler ProgressUpdateEvent
// Method to raise the event
public void UpdateProgress(object sender, ProgressEventArgs e)
{
ProgressChangedEventHandler handler;
lock (progressUpdateEventLock)
{
handler = progressUpdateEvent;
}
if (handler != null)
handler(sender, e);
}

I would recommend you read up on the BackgroundWorker class. It is exactly for the problem you are trying to solve and makes things a lot easier than doing manual threading yourself.
Brief Example
public Form1()
{
InitializeComponent();
backgroundWorker.WorkerReportsProgress = true;
backgroundWorker.WorkerSupportsCancellation = true;
backgroundWorker.ProgressChanged += new ProgressChangedEventHandler(backgroundWorker_ProgressChanged);
}
void backgroundWorker_ProgressChanged(object sender, ProgressChangedEventArgs e)
{
progressBar1.Value = e.ProgressPercentage;
}
private void btnStart_Click(object sender, EventArgs e)
{
if (!backgroundWorker.IsBusy)
backgroundWorker.RunWorkerAsync();
}
private void backgroundWorker_DoWork(object sender, DoWorkEventArgs e)
{
for (int i = 1; i < 101; ++i)
{
if (backgroundWorker.CancellationPending)
{
e.Cancel = true;
break;
}
else
{
//Sort Logic is in here.
Thread.Sleep(250);
backgroundWorker.ReportProgress(i);
}
}
}
private void btnCancel_Click(object sender, EventArgs e)
{
if (backgroundWorker.IsBusy && backgroundWorker.WorkerSupportsCancellation)
backgroundWorker.CancelAsync();
}

You could do something like this:
public delegate void StatusReporter(double progressPercentage);
public class MainClass
{
public void MainMethod()
{
Worker worker = new Worker(ReportProgress);
ThreadStart start = worker.DoWork;
Thread workThread = new Thread(start);
workThread.Start();
}
private void ReportProgress(double progressPercentage)
{
//Report here!!!
}
}
public class Worker
{
private readonly StatusReporter _reportProgress;
public Worker(StatusReporter reportProgress)
{
_reportProgress = reportProgress;
}
public void DoWork()
{
for (int i = 0; i < 100; i++ )
{
// WORK, WORK, WORK
_reportProgress(i);
}
}
}

There are a few option available to solve this sort of issue. In any case, you will have to fiddle with Invoke to get the UI to update.
You could...
...add an event that fires on your new class which your UI can listen to, and Invoke as applicable - you'd still need to pass the data to your worker class (by constructor, properties, method call, etc)
...keep the method as a method on your form, and pas that to start your new thread from (after all, a new thread doesn't have to be starting in a different class)
...change the access modifiers on your controls to be (say) internal such that any class within the same assembly can Invoke changes to the controls, or read from them.
...make your worker class a child of the form it needs to access - it can then see the privates of its parent, as long as it is passed a reference to the instance.