So I have a simple configuration class PubsubSettings:
public class PubSubSettings
{
public string ProjectId { get; set; }
public string TopicId { get; set; }
public int PartnerId { get; set; }
public string SubscriptionId { get; set; }
}
I have previously only had one of these configured in my appsettings.json but now I want to be able to handle an arbitrary number of them.
I have another class, PubSub, that I usually inject an IOptions<PubSubSettings> into. And this, in turn, gets injected into my Worker class.
services.Configure<PubSubSettings>(configuration.GetSection(nameof(PubSubSettings)));
...
services.AddHostedService<Worker>();
So, what I want to do now, is add a new Worker as a hosted service for each entry in my AppSettings PubSubSettings section and inject the relevant IOptions<PubSubSettings> into each of these (along with the standard ILogger).
So in essence, I'd like this config block:
"PubsubSettings": [
{
"ProjectId": "project1",
"TopicId": "topic",
"PartnerId": 1,
"SubscriptionId": "sub1"
},
{
"ProjectId": "project2",
"TopicId": "topic2",
"PartnerId": 2,
"SubscriptionId": "sub2"
}
]
To end up with two hosted services being created, one with the first set of options and the other with the second.
I've seen a few questions looking for similar things but nothing I could find quite lined up with this so I'm a bit stumped. Any ideas?
The solution is Dotnet 5.
So from what I've been able to find, there's no way to do this out-of-the box.
However, This can be done manually using a combination of ActivatorUtilities and Configuration.Bind().
private void CreateWorkers(IServiceCollection services, IConfigurationRoot configuration)
{
List<PubSubSettings> pubsubSettings = new();
configuration.Bind(nameof(PubSubSettings), pubsubSettings);
foreach (PubSubSettings setting in pubsubSettings)
{
services.AddSingleton<IHostedService>(s => ActivatorUtilities.CreateInstance<Worker>(s, ActivatorUtilities.CreateInstance<PubSub.PubSub>(s, setting)));
}
}
Essentially, you can use Bind to get the configuration objects from the JSON. Then you can manually construct the Worker for the call to AddHostedService using CreateInstance.
Two calls are needed in this case, one to generate the PubSub for the worker (in which we pass the setting parameter) and the other to generate the Worker itself.
ActivatorUtilities essentially injects everything you need for the object except the parameters you've provided.
We need to use .AddSingleton<IHostedService> because of the way that the framework checks for dupes with AddHostedService().
Maybe you could try creating a class only for the object and let the PubSubSettings class only for the array:
public class PubSubSettings
{
public PubSubObject[] PubSubs { get; set; }
}
public class PubSubObject
{
public string ProjectId { get; set; }
public string TopicId { get; set; }
public int PartnerId { get; set; }
public string SubscriptionId { get; set; }
}
Then in the startup class you should use Bind to get the current value of the array to create a Worker for each PubSub:
PubSubSettings settings = new PubSubSettings();
Configuration.GetSection(nameof(PubSubSettings)).Bind(settings);
...
foreach(PubSubObject item in settings.PubSubs)
{
services.AddHostedService<Worker>();
}
Then in the PubSub class you need to search the PartnerId inside the Array.
Or you could follow the approach described in the section Named options support using IConfigureNamedOptions in the Microsoft docs: Options pattern in ASP.NET Core
Related
I currently have a class with around 40 dependency injection. It is a hard to maintain and unit test. I am not sure a good way around.
The code is done for any type of application process that is needed to process (New License, License Renewal, Student Registration, ...), there are around 80 different types applications and what sections are associated with each application type is determined by a database table.
I have a class with all of the possible properties, there are a several more than listed but you should get the idea. Each the properties have their own set of properties that are basic data types or object pointing to other classes.
class Application
{
[JsonProperty(PropertyName = "accounting")]
public Accounting Accounting { get; set; }
[JsonProperty(PropertyName = "application")]
public Application Application { get; set; }
[JsonProperty(PropertyName = "applicationType")]
public ApplicationType ApplicationType { get; set; }
[JsonProperty(PropertyName = "document")]
public List<Attachment> Document { get; set; }
[JsonProperty(PropertyName = "employment")]
public List<Employment> Employment { get; set; }
[JsonProperty(PropertyName = "enrollment")]
public Enrollment Enrollment { get; set; }
[JsonProperty(PropertyName = "individualAddressContact")]
public IndividualAddressContact IndividualAddressContact { get; set; }
[JsonProperty(PropertyName = "instructors")]
public List<Instructor> Instructors { get; set; }
[JsonProperty(PropertyName = "license")]
public License License { get; set; }
[JsonProperty(PropertyName = "licenseRenewal")]
public LicenseRenewal LicenseRenewal { get; set; }
[JsonProperty(PropertyName = "MilitaryService")]
public List<MilitaryService> MilitaryService { get; set; }
[JsonProperty(PropertyName = "paymentDetail")]
public PaymentDetail PaymentDetail { get; set; }
[JsonProperty(PropertyName = "photo")]
public List<Attachment> Photo { get; set; }
[JsonProperty(PropertyName = "portal")]
public Portal Portal { get; set; }
[JsonProperty(PropertyName = "section")]
public List<Section> Section { get; set; }
[JsonProperty(PropertyName = "testingCalendar")]
public TestingCalendar TestingCalendar { get; set; }
[JsonProperty(PropertyName = "testingScore")]
public List<TestingScore> TestingScore { get; set; }
[JsonProperty(PropertyName = "USCitizen")]
public USCitizen USCitizen { get; set; }
}
So this class is sent/received to an Angular 10 front end using Web API's.
When an application is requested the sections and the different properties are initiated and if the application has be started the progress will be reloaded. So it is possible some of properties will be pulled from the database and sent to the Angular app.
So I have something such as
Load(applicationTypeId, applicationId)
{
Get the sections for the application type
For each section in the sections
switch sectionid
case Documents
Load all of the documents required for the application type and get any documents uploaded
case Accounting
Load the payment details, if no payment made calculate the payment
case IndividualAddressContact
Load the person name/address/contact and set a few defaults if the person hasn't started.
.....
next
}
Save()
{
Save the application
switch current section
case Documents
Save all of the documents for the application
case Accounting
Save the payment details for the application
case IndividualAddressContact
Save the person name/address/contact for the application
.....
get the next section
Update the application current section
}
I have put all of the items in the switch into their own classes but in the end I still have 1 point for serialization/deserialization and still end up with to many dependencies injected. Creating a unit test with over 40 dependencies seems hard to maintain and given I won't know which properties will/won't used until an application is requested and loaded from database. I am unsure how to get around the switch, without at some point and time having to have all of the dependencies injected into 1 class.
I would appreciate some ideas of how to get around this.
"I currently have a class with around 40 dependency injection..." - Oh my gosh!
"It is a hard to maintain and unit test..." - I don't doubt that in the least!
SUGGESTED REFACTORING:
Create a class that manages "Applications" (e.g. "ApplicationManager").
Create an abstract class "Application".
One advantage of "abstract class" over "interface" here that you can put "common code" in the abstract base class.
Create a concrete subclass for each "Application" : public class NewLicense : Application, public class LicenseRenewal : Application, etc. etc.
... AND ...
Use DI primarily for those "services" that each concrete class needs.
I'll bet the constructors for your individual concrete classes will only need to inject three or four services ... instead of 40. Who knows - maybe your base class won't need any DI at all.
This is actually a design we're actually using in one of our production systems. It's simple; it's robust; it's flexible. It's working well for us :)
I would recommend using convention over configuration principle, with the Service Locator.
Declare something like IApplicationHandler interface in your program, e.g.
public interface IApplicationQueryHandler
{
Application Populate(Application application);
}
public interface IApplicationSaveHandler
{
Bool Save(Application application);
}
Then, write pieces of your code, with dependencies and such, e.g.
public class AccountingApplicationQueryHandler : IApplicationQueryHandler
{
public Application Populate(Application application) {
//// Load the payment details, if no payment made calculate the payment
return application;
}
}
public class AccountingApplicationSaveHandler : IApplicationSaveHandler
{
public Bool Save(Application application) {
//// Save the payment details for the application
return true; // this just flags for validation
}
}
// repeat for all other properties
Then in your controller, do something like
public class ApplicationController: Controller
{
public readonly IServiceProvider _serviceProvider;
public ApplicationController(IServiceProvider sp) {
_serviceProvider = sp;
}
public Application Load(string applicationTypeId, string applicationId)
{
var application = new Application(); // or get from db or whatever
var queryHandlers = _serviceProvider.GetServices(typeof(IApplicationQueryHandler));
foreach(var handler in queryHandlers) {
application = handler.Populate(application);
}
return application;
}
[HttpPost]
public bool Save(Application application)
{
var result = true;
var saveHandlers = _serviceProvider.GetServices(typeof(IApplicationSaveHandler));
foreach(var handler in queryHandlers) {
result = handler. Save(application);
}
return result;
}
}
You would need to register your handlers, which you can do e.g. like so:
var queryHandlers = Assembly.GetAssembly(typeof(IApplicationQueryHandler)).GetExportedTypes()
.Where(x => x.GetInterfaces().Any(y => y == typeof(IApplicationQueryHandler)));
foreach(queryHandler in queryHandlers) {
services.AddTransient(typeof(IApplicationQueryHandler), queryHandler);
}
// repeat the same for IApplicationSaveHandler
Now finally, you can write unit tests for part of the code like so
[TestClass]
public class AccountingApplicationQueryHandlerTests
{
[TestMethod]
public void TestPopulate()
{
// arrange
var application = new Application();
var handler = new AccountingApplicationQueryHandler(); // inject mocks here
// act
var result = handler.Populate(application);
// Assert
Assert.AreEqual(result. PaymentDetail, "whatever");
}
}
And you can test that your controller calls the right things by mocking IServiceProvider and injecting that with a couple of dummy handlers to confirm they are called correctly.
Following zaitsman's answer you also could create AggregatedApplicationQueryHandler and AggregatedApplicationSaveHandler and pass collection of concrete implementation of IApplicationQueryHandler and IApplicationSaveHandler to its constructor.
Then you don't need foreach loop inside controller(you loop over handlers inside aggregated handler) and always have only one handler passed to controller. Passing its by constructor parameter shouldn't be so much painful.
You also could create facade over some small services and aggregate theirs functions into one bigger facade service.
I'm trying to load some settings from the appsettings file and I've got a small issue with the way lists are loaded when using the options pattern. Suppose I've got the following classes (for loading the settings):
public class Application {
public string Name { get; set; } = "";
public IEnumerable<string> Roles { get; set; } = new[] {""};
public Application ToApplicationWithoutPass() =>
new Application {
Name = Name,
Username = Username,
Roles = Roles.ToList()
};
}
public class Applications {
public IEnumerable<Application> AppList { get; set; } = new List<Application>();
}
And here is what the settings that are defined on the appsetings file look like:
"Applications": {
"AppList": [
{
"Name": "SraWebuserAdmin",
"Roles": [ "SraEntitiesWriters", "SraEntitiesReaders", "SraEntitiesLoginAccess" ]
},
...
Here are the entries from the DI setup which is done on the ConfigureServices method:
services.Configure<Applications>(options => Configuration.GetSection("Applications").Bind(options));
services.AddScoped<IApplicationAccessVerifier, ApplicationAccessVerifier>();
And, finally, here's the constructor of the ApplicationAccessVerifier class:
public ApplicationAccessVerifier(IOptionsSnapshot<Applications> applicationOptions) {
_applicationOptions = applicationOptions;
}
Now, the question: if I don't initialize the AppList property,
public class Applications {
public IEnumerable<Application> AppList { get; set; }
}
then the settings are loaded correctly.
However, if I initialized it like I've shown (making sure the filed wrapper by the property is initialized with an empty list), then the settings won't be copied to the AppList.
I find this strange since simple properties (ex.: Name on the Application class) aren't affected by the same issue.
Can anyone tell me why this happens or point me to an official documentation about it?
I am using standard configuration pattern for ASP.NET Core applications and I can not bind configuration to my class as it has construtor with parameters.
In appsettings.json I included desired config:
"MyServiceConfig": {
"Identity": {
"Version": "1.0",
"ComplicatedUri": {
"Scheme": "http",
"Authority": "localhost",
"Path": "SuperService"
}
}
},
My config class and it's dependencies look like that:
public class MyServiceConfig
{
public MyIdentity Identity { get; set; }
}
public class MyIdentity
{
public string IdentityName { get; set; }
public string Version { get; set; }
public MyComplicatedUri ComplicatedProperty { get; set; }
public MyIdentity(string version, MyComplicatedUri complicatedProperty)
{
Version = version;
ComplicatedProperty = complicatedProperty;
IdentityName = complicatedProperty.Path;
}
}
public class MyComplicatedUri
{
public string Scheme { get; set; }
public string Authority { get; set; }
public string Path { get; set; }
}
I have already tried code like that:
private MyServiceConfig GetMyConfig(IConfiguration configuration)
{
var config = new MyServiceConfig();
configuration.GetSection("MyServiceConfig").Bind(config);
return config;
}
It throws exception:
'Cannot create instance of type 'MyIdentity' because it is missing
a public parameterless constructor.'
That behaviour can make sense in some cases but in that particular one not so much. Mappings could be straightforward - by property names which have public setters or by constructor parameter names.
Another idea would be adding converter in AddJsonOptions in Startup class for my types - IConfiguration.Bind could infer how to construct it but I also tried that with no success.
Have you encoutered similar problems and found some reasonable solution to that?
Edit: Adding parameterless constructor will work of course, but sometimes I need to deal with some classes from external packages I'd like to use as parts of my config class so let's assume we can not modify them. I'd like to avoid adding new types for mapping only as well. Ideally I'd like to force ASP.NET Core engine to use existing constructor with parameters and by parameter name map with json properties - which currently is not working.
You should just add a default constructor in MyIdentity class.
.bind() binds the configuration into the object using the default constructor.
So, add the required default constructor in your MyIdentity class and it will be fine.
public MyIdentity(){}
Also, you can use Options.
In ConfigureServices, add the following:
services.AddOptions();
services.ConfigureOptions<MyServiceConfig>();
and then use dependency injection to initialize it.
In addition, use your own JsonConverter
I want a service I can inject - or in my example get with GetService - that contains settings from my appsettings.json file.
The appsettings.json fragment looks like this:
"ExternalInterfaces": [
{
"Name": "name1",
"BaseUrl": "https://www.baseurl1.svc"
},
{
"Name": "name2",
"BaseUrl": "https://www.baseurl2.svc"
}
]
To do this I have the following interfaces:
using System.Collections.Generic;
namespace Infrastructure.Settings
{
public interface IExternalInterfaceSettingsCollection
{
IReadOnlyCollection<IExternalInterfaceSettings> Settings { get; set; }
}
}
namespace Infrastructure.Settings
{
public interface IExternalInterfaceSettings
{
string Name { get; set; }
string BaseUrl { get; set; }
}
}
and the following corresponding classes:
using System.Collections.Generic;
namespace Infrastructure.Settings
{
public class ExternalInterfaceSettingsCollection : IExternalInterfaceSettingsCollection
{
public IReadOnlyCollection<IExternalInterfaceSettings> Settings { get; set; }
}
}
namespace Infrastructure.Settings
{
public class ExternalInterfaceSettings : IExternalInterfaceSettings
{
const string DefaultName = "newExternalInterface";
const string DefaultBaseUrl = "";
public string Name { get; set; } = DefaultName;
public string BaseUrl { get; set; } = DefaultBaseUrl;
}
}
And in my Startup.cs I have this (definitely gets called with no exceptions):
services.Configure<IExternalInterfaceSettingsCollection>(settings => _configuration.GetSection("ExternalInterfaces").Bind(settings));
and this is then consumed as follows:
var externalInterfaceConfiguration = app.ApplicationServices.GetService<ExternalInterfaceSettingsCollection>();
var Setting1BaseUrl = externalInterfaceConfiguration.Settings
.SingleOrDefault(s => s.Name == "name1")?.BaseUrl;
However, in the last 3 lines, externalInterfaceConfiguration is always null.
I'm clearly missing something, but I can't see what. Any clues?
You've registered IExternalInterfaceSettings, but you're attempting to retrieve ExternalInterfaceSettings. There's no such service in the collection, so the result is null (since you used GetService<T>). If you had used GetRequiredService<T> then an exception would have been thrown telling you as much.
Then, the options pattern is not meant to bind to interfaces. The whole idea is that you're binding to a POCO that represents a specific set of settings. If you want to use an interface, I suppose that's your prerogative, but it's not going to be applicable to the options configuration. In other words, you need the following instead:
services.Configure<ExternalInterfaceSettings>(Configuration.GetSection("ExternalInterfaces"));
(Note, the action overload with Bind is superfluous. You can just pass the config section directly.)
With that, you'll be able to request something like IOptions<ExternalInterfaceSettings>, but you still cannot get ExternalInterfaceSettings directly from the service collection. If you want that functionality, you'll need to add an additional service registration (which can utilize an interface, this time):
services.AddScoped<IExternalInterfaceSettings, ExternalInterfaceSettings>(p =>
p.GetRequiredService<IOptions<ExternalInterfaceSettings>>().Value);
I'm writing session manager class in .NET MVC 4 and I got stuck at the point of creating SqlConfiguration.
Here is one of the properties from the class:
public static MsSqlConfiguration SqlConfig { get; set; }
All working perfectly excluding the fact that I can manage sessions only from MS SQLServer.
I want to do something like this:
public static MsSqlConfiguration,SQLiteConfiguration SqlConfig { get; set; }
And I know it isn't possible so I don't know what to do.
Thanks.
You can create a class with these 2 properties and Use them. I know its very basic
class MyConfig
{
public static MsSqlConfiguration SqlConfig { get; set; }
public static SQLiteConfiguration SQLiteConfig { get; set; }
}
Use them like
public static MyConfig SqlConfig { get; set; }
What about a dictionary?
public static IReadOnlyDictionary<string, IPersistenceConfigurer> DbConfigurations =
new ReadOnlyDictionary<string, IPersistenceConfigurer>(
new Dictionary<string, IPersistenceConfigurer>
{
{ "azure", MsSqlConfiguration.MsSql2008
.ConnectionString("ConnectionString")
.Dialect<MsSqlAzure2008Dialect>()
.Driver<SqlAzureClientDriver>() },
{ "mssql", MsSqlConfiguration.MsSql2008
.ConnectionString("ConnectionString")
.Dialect<MsSql2008Dialect>() },
{ "sqlite", SQLiteConfiguration.Standard
.InMemory() },
// etc..
});
IPersistenceConfigurer is an interface that any database configuration must implement.
As it's a dictionary, you can always check if a database configuration is present by calling DbConfigurations.ContainsKey("mssql").
Another option is using a generic list of IPersistenceConfigurer (aka List<IPersistenceConfigurer>) and get a configuration using LINQ OfType<T> extension method as follows:
dbConfigs.OfType<MsSqlConfiguration >().Single()
...or
dbConfigs.Single(config => config is MsSqlConfiguration)
Another option, if you're using Dependency Injection and an IoC container such as Castle Windsor is to register a factory with the container that can provide an instance of IPersistenceConfigurer to any components that require it. This way you can register different components for the IPersistenceConfigurer service depending on which environment you are running in (as I assume that you only need one particular IPersistenceConfigurer for the application at any one time).