I am trying to close the app by clicking one button but it's not working.
this is my code.
private void buttonclose_Click(object sender, EventArgs e)
{
Application.Exit();
}
Like #Dialecticus said, it could be that you never registered the event handler. In your form designer, when you double click the button it will register the click event for you automatically. If you didn't do that and your code was just copy/pasted you would have to go into the events to "wire" them yourself.
If that's not your issue, you could try using Environment.Exit() or this.Close() instead.
Use this Code, it will diffidently work
private void btnExit_Click(object sender, EventArgs e)
{
this.Close();
}
Related
I have a .NET Control with an WebBrowser in it.
This Control is used in my Application in a Form.
So if I close this Form or the whole Application or if I do anything that my WebBrowser is going to be closed I need to fire an event.
Ive tried it like this, but the if function does not works in the way I want it:
private void webBrowser1_VisibleChanged(object sender, EventArgs e)
{
if (!webBrowser1.Visible)
{
MessageBox.Show("Hi");
}
}
Any ideas?
Thanks
this code for after you closed the form....
private void webBrowser1_FormClosed(object sender, FormClosedEventArgs e)
{
MessageBox.Show("WebBrowser Closed");
}
this code for asking permission to do something while closing...
private void frmReader_FormClosing(object sender, FormClosingEventArgs e)
{
MessageBox.Show("Are you sure want to close the WebBrowser?");
}
Only the form knows when it's being closed. A way to accomplish this is to have your control find its containing form using Control.FindForm(), register handlers for the form's closing events (e.g. during initialization), and raise new events from the control.
I have been developing a windows form application and ran into a problem.
After trying various things (Listed below) I have come to seek your knowledge to help point me in the right direction.
I have replicated a much simpler version of my program:
As you can see, I have two textboxes. I want to be able to click on the textbox on the bottom (textbox1) and call some form of an event, in this case, for simplicity, pop up a message box.
I have been through the events listed here:
https://msdn.microsoft.com/en-us/library/system.windows.forms.textbox_events(v=vs.110).aspx
And implemented them into my code as I expected one of them to work. However, this is not the case.
private void textBox1_TextChanged(object sender, EventArgs e)
{
MessageBox.Show("TextBox Entered");
}
//Above - Will pop message box when text entered.
private void textBox1_GotFocus(object sender, EventArgs e)
{
MessageBox.Show("TextBox Entered");
}
private void textBox1_Enter(object sender, EventArgs e)
{
MessageBox.Show("TextBox Entered");
}
private void textBox1_Click(object sender, EventArgs e)
{
MessageBox.Show("TextBox Entered");
}
Does anybody know what I am missing? I presume what I am trying to achieve is actually possible?
Kind Regards,
B.
Ensure the event is subscribed to the methods you have written. You can do this in the design view using the Events tab of the property window (looks like a lightning bolt). As mentioned by others, a double click in the events window will generate the event's method for you, and subscribe to it automatically.
Another way is to subscribe directly using code; you could write this in the form constructor for example:
textBox1.TextChanged += textBox1_TextChanged;
I program in Visual Studio 2013 C#.
I want to have a functionality to disable for short time a button.
I tried button.Enabled=false, but I see that when I click it during it is disabled then the click action starts right after I get that button enabled in other place of the program.
How to clear that event or block them when button is disabled?
Best regards,
Krzysztof
for disable button click.
button1.Click -= button1_Click; // here button1_Click is your event name
for enable button click.
button1.Click += button1_Click; // here button1_Click is your event name
This is the extremely simple way that I found on the internet and it works.
Disable the button(s)
Run whatever is needed to be performed on the procedure
Run this command Application.DoEvent();. This command enqueues all the click events (as many as the user clicked) and ignore/dispose them
Enable the button(s) at the end
Good Luck
Can't you just check for button's state before executing commands in the method?
For example:
void Click(object sender, EventArgs e)
{
if(!(sender as Button).Enabled)
return;
//other statements
}
Try
YourButton.Attributes.Add("onClick", "");
To remove its onClick altogether.
and then
YourButton.Attributes.Add("onClick", "YourButton_Click");
To add it again.
But your program shouldn't execute the Click when you say it does. It's likely there's something wrong in your code's logic.
Look at this code below, after click button2, button 1 is disabled. while button 1 is disabled, click button 1. After button 1 enable automatically after 5 seconds textBox1 update to "Update".
private void button1_Click(object sender, EventArgs e)
{
textBox1.Text = "Update";
}
private void button2_Click(object sender, EventArgs e)
{
button1.Enabled = false;
Thread.Sleep(5000);
button1.Enabled = true;
}
private void button3_Click(object sender, EventArgs e)
{
textBox1.Text = "";
}
btn.Visibility = Visibility.Collapsed;
You can try this.
ALL WRONG!
"button1_Click" is not the standard handler behind a button, so it cannot be removed. That is your own function.
YourButton.Attributes does not exist at all.
Nobody even mentioned "Web Forms".
Your description does not match the Windows Forms Button behavior.
The solution for the question you really asked is:
Use a usual Windows Forms Button or override the click event to check again if the button is enabled.
I am very new with the C# UserControl. I have problems with the event Leave. This is my situation: I would like to go from usercontrolA to userControlB. Before going to userControlB, usercontrolA_Leave event is called.
private void usercontrolA_Leave(object sender, EventArgs e)
{
MessageBox.Show("you are leaving.....");
}
After MessageBox is shown, the program will not proceed to my userControlB. HOWEVER when there is no MessageBox in the code, the program can proceed to userControlB.
private void usercontrolA_Leave(object sender, EventArgs e){//anything but MessageBox}
In my case, I need MessageBox.
I need MessageBox(or other thing) for me to decide whether staying or leaving.. .
msdn Control.Leave Event
I heard about setting set focusor lost focus. Is that possible to use this?
I hope you guys could understand what I have written. Thank you in advance.. :)
You will not be able to preserve mouse movements once a MessageBox is created. This is a modal box that comes up on top of the existing window and takes the focus away from the current form and interrupts the mouse.
Consider an option that does not interrupt the mouse, such as writing out to a textbox. Create a TextBox will the multi-line and scrollbar options enabled. Then write to it.
private void usercontrolA_Leave(object sender, EventArgs e)
{
textBox1.Append("you are leaving A...\r\n");
}
private void usercontrolB_Enter(object sender, EventArgs e)
{
textBox1.Append("you are entering B...\r\n");
}
I'm writing a Hangman program in C# and when I press a keyboard button I want the button on the form to be clicked. Where should I write this? In form1.load()?
No, you should select the Form on which you want the event to be triggered, then go to the properties pane, select the event tab and go down to KeyPress event, double click it and add some code.
Normaly something like this would do what you want, just google the KeyChar value to determine the keyPress you want to control, you can add more if statements:
private void Form1_KeyPress(object sender, KeyPressEventArgs e)
{
if (e.KeyChar == (char)13)
{
Button1.PerformClick();
}
//Other if statements if you want to keep an eye out for other keyPresses
}
[edit] I just remembered you might be also considering the shortcuts, in wich case the Button1.Text property should be marked &Button1, this way the "B" would be underlined and accept the alt+B shortcut to execute the button click event.
The & symbol is set before the letter you want for the shortcut, make sure you dont use the same letter for various buttons.
You wouldn't write the code in Form.Load() if you want it to happen in response to a keyboard event. That event occurs (and the code inside of it is executed) when your form first loads (appears on screen).
How about handling the KeyPress event and writing the code in that method, instead? Your form has one of those events, too.
Sample code:
private void Form1_KeyPress(object sender, KeyPressEventArgs e)
{
Button1.PerformClick();
}
The PerformClick method will generate a Click event for a Button control. You can handle that Click event in a similar way:
private void Button1_Click(object sender, EventArgs e)
{
// do something in response to the button being clicked
// ...
MessageBox.Show("Button clicked!");
}
If this event-handling stuff is confusing to you, make sure that you pick up a good book on programming in C# and/or the .NET Framework so that you learn it well. It's very important and not something to skip!
You have to enable KeyPreview property on the form, then you have to implements the KeyPress event directly on the form :
Form1.KeyPress +=new KeyPressEventHandler(Form1_KeyPress);
private void Form1_KeyPress(object sender, KeyPressEventArgs e) {
if(e.KeyCode == someKey) {
button1.performclick();
}
}
private void Form_KeyDown(object sender, KeyEventArgs e)
{
if(e.KeyCode == Keys.Left)
{
// Do your hang job
Button_Click(sender, EventArgs.Empty);
}
}
You need to subscribe to the events of interest and process them after. But before you need to read and study how to do that. It's a not a difficult issue in C#.
http://msdn.microsoft.com/en-us/library/ms171534.aspx
One time subscribed to the events create a function that you can call from button click and from keydown.