The state of the connection stays active in pool, when there is an exception while executing a query or stored procedure through c#.
The Npgsql version that I am using is 4.1.7.
Here is the code that I am trying to execute.
NpgsqlCommand cmd = null;
NpgsqlDataAdapter sda = null;
NpgsqlConnection conn = null;
try {
string sql = "a_test";
conn = new NpgsqlConnection("Server=localhost;Port=5432;Username=admin;Password=test;Database=majordb;SearchPath=dbs;CommandTimeout=300;MaxPoolSize=500;Connection Idle Lifetime=180;Connection Pruning Interval=5;");
cmd = new NpgsqlCommand(sql);
cmd.CommandType = CommandType.StoredProcedure;
sda = new NpgsqlDataAdapter(cmd);
cmd.Connection = conn;
sda.Fill(dataTable);
}
catch (Exception e) {
//log
}
finally {
if(null != sda)
{
try
{
sda.Dispose();
}
catch (Exception)
{
}
}
try
{
cmd.Connection.Close();
cmd.Connection.Dispose();
}
catch (Exception)
{
}
try
{
cmd.Dispose();
}
catch (Exception)
{
}
}
If the above code executes properly without any exception, the connection state in pool goes to idle, which is correct. But if an exception occurs while executing, like below:
"Npgsql.NpgsqlException (0x80004005): Exception while reading from stream --->
System.IO.IOException: Unable to read data from the transport connection: A connection attempt
failed because the connected party did not properly respond after a period of time, or established
connection failed because connected host has failed to respond."
The connection state in pool shows as active for about 5 mins or so, even though the close/dispose methods are called in finally block. This means the close/dispose did not properly executed by Npgsql. If the program keeps the connection state in pool active for every connection ran within 5 mins, then there can be an issue with MaxPoolSize error.
I wanted to see the connection state to idle, even when there is an exception. How do I do this.
Please note: I am not looking for a solution to the exception that I listed above. I am looking for a solution where the connection state is changed to idle from active when there is an exception while executing the above code.
To know if the connection state is active or not I used the following query:
SELECT
pid,
usename,
application_name,
datname,
client_addr,
rank() over (partition by client_addr order by backend_start ASC) as rank,
state,
state_change,
current_timestamp,
query,
query_start,
backend_start,
FROM
pg_stat_activity
WHERE
pid <> pg_backend_pid( )
AND
application_name !~ '(?:psql)|(?:pgAdmin.+)'
AND
datname = current_database()
AND
usename = current_user
Any help is really appreciated.
I have an error like this
lock wait timeout exceeded try restarting transaction
Maybe I didn't understand it. But I've a solution if I set CommandTimeout=1000 or something higher. I didn't try it in production yet. But I'd like to hear any opinion on this.
// 40 lines of command.Parameters here
command.Parameters.AddWithValue("sample1", sam1);
command.Parameters.AddWithValue("sample2", sam2);
command.Parameters.AddWithValue("sample3", sam2);
try
{
command.ExecuteNonQuery();
}
catch (MySqlException mex)
{
I was receiving "lock wait timeout exceeded try restarting transaction" intermittently. Then I started wrapping everything in transactions and I stopped receiving those errors. This should prevent table locks from remaining after the query is executed.
(Assuming "conn" is a MySqlConnection, "iLevel" is the isolation level you want to use, and "query" contains your query as a string)
int rowCount = 0; // In case you want the number of rows affected
try
{
if (conn.State != ConnectionState.Open)
conn.Open();
MySqlCommand command = new MySqlCommand(query, conn);
using(var transaction = conn.BeginTransaction(iLevel))
{
command.Transaction = transaction;
command.CommandTimeout = int.MaxValue;
// Set parameters etc...
try
{
rowCount = command.ExecuteNonQuery();
transaction.Commit();
}
catch(Exception ex)
{
transaction.Rollback();
// Handle query exception...
}
}
}
catch(Exception ex)
{
// Handle general exception...
}
You could try (just for testing purposes) set transaction isolation level =
"READ COMMITTED" and if this fails try set to "READ UNCOMMITTED"
MySql reference
check for dead lock:
"SHOW ENGINE INNODB STATUS" from the MySQL Command line client (not a
query browser) will give you info on deadlocks.
Deadlocks can also be caused by uncommitted transactions (usually
program bugs) and the person who is running the uncommitted
transaction will not see the problem as they will be working fine
(through their data will not be committed). Quote from here
I am getting a timeout error thrown. How can I increase the amount of time before the transaction times out?
Database dbSvc = DatabaseFactory.CreateDatabase();
//use one connection
using (DbConnection conn = dbSvc.CreateConnection())
{
conn.Open();
DbTransaction transaction = conn.BeginTransaction();
try
{
....
}
catch (Exception ex)
{
transaction.Rollback();
ret.IsSuccess = false;
ret.ExceptionInfo = ex;
}
finally
{
ret.InvoiceInfo = invoiceOut;
}
Thanks!
If you are using ADO.Net add timeout property to your connection string. Increase accordingly until it no longer times out, but generally if you are adding a timeout property you should be looking at your db and analyzing weaknesses such as lack of indexes this can be done via analyzing your queries via the sql profilier.
I have this code that calls the stored procedure to 'insert' data to tables in SQL.
using (SqlConnection connection = new SqlConnection(Global_Variables.DBcon))
{
SqlCommand cmd = new SqlCommand("sp_WinApps_Import_ERData", connection);
cmd.CommandType = CommandType.StoredProcedure;
connection.Open();
try
{
cmd.ExecuteNonQuery();
Console.WriteLine("file imported!");
}
catch (SqlException ex)
{
Console.WriteLine("BATCH ID ALREADY EXISTS!" + ex.Message );
}
finally
{
connection.Close();
}
}
but the problem is, it doesn't catch the error in the 'try-catch method' i dont know why but my code is correct.
The Error says: "Violation of UNIQUE KEY constraint 'Cons_BatchID'. Cannot insert duplicate key in object 'dbo.tbl_WinApps_FileHeader'.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
The statement has been terminated."
I solved it guys. Go to Debug > Exceptions and i just 'unchecked thrown checkbox' in Common Language Runtime Exceptions
I got following error once in my application.
This SQLTransaction has completed; it is no longer usable
Stack Trace is attached below – It says about Zombie Check and Rollback.
What is the mistake in the code?
Note: This error came only once.
UPDATE
From MSDN - SqlTransaction.Rollback Method
A Rollback generates an InvalidOperationException if the connection is terminated or if the transaction has already been rolled back on the server.
From Zombie check on Transaction - Error
One of the most frequent reasons I have seen this error showing up in various applications is, sharing SqlConnection across our application.
CODE
public int SaveUserLogOnInfo(int empID)
{
int? sessionID = null;
using (SqlConnection connection = new SqlConnection(connectionString))
{
connection.Open();
SqlTransaction transaction = null;
try
{
transaction = connection.BeginTransaction();
sessionID = GetSessionIDForAssociate(connection, empID, transaction);
//Other Code
//Commit
transaction.Commit();
}
catch
{
//Rollback
if (transaction != null)
{
transaction.Rollback();
transaction.Dispose();
transaction = null;
}
//Throw exception
throw;
}
finally
{
if (transaction != null)
{
transaction.Dispose();
}
}
}
return Convert.ToInt32(sessionID,CultureInfo.InvariantCulture);
}
Stack Trace
REFERENCE:
What is zombie transaction?
Zombie check on Transaction - Error
SqlTransaction has completed
http://forums.asp.net/t/1579684.aspx/1
"This SqlTransaction has completed; it is no longer usable."... configuration error?
dotnet.sys-con.com - SqlClient Connection Pooling Exposed
Thread abort leaves zombie transactions and broken SqlConnection
You should leave some of the work to compiler, to wrap that in a try/catch/finally for you.
Also, you should expect that Rollback can occasionally throw an exception, if a problem occurs in Commit stage, or if a connection to server breaks. For that reason you should wrap it in a try/catch.
try
{
transaction.Rollback();
}
catch (Exception ex2)
{
// This catch block will handle any errors that may have occurred
// on the server that would cause the rollback to fail, such as
// a closed connection.
Console.WriteLine("Rollback Exception Type: {0}", ex2.GetType());
Console.WriteLine(" Message: {0}", ex2.Message);
}
This is copied exactly from MSDN documentation page for Rollback method.
I see that you're worried that you have a zombie transaction. In case you pasted, it doesn't sound like you have a problem. You're transaction has been completed, and you should no longer have anything to do with it. Remove references to it if you hold them, and forget about it.
From MSDN - SqlTransaction.Rollback Method
A Rollback generates an InvalidOperationException if the connection is terminated or if the transaction has already been rolled back on the server.
Rethrow a new exception to tell user that data may not have been saved, and ask her to refresh and review
Note: This error came only once.
then it is very hard to say much; it could be simply that the // Other Code etc simply took to long, and the entire thing got killed. Maybe your connection died, or an admin deliberately killed it because you were blocking.
What is the mistake in the code?
over-complicating it; it can be much simpler:
using (var connection = new SqlConnection(connectionString))
{
connection.Open();
using(var transaction = connection.BeginTransaction())
{
try
{
sessionID = GetSessionIDForAssociate(connection, empID, transaction);
//Other Code
transaction.Commit();
}
catch
{
transaction.Rollback();
throw;
}
}
}
much less code to get wrong.
I use code below can reproduce this error, I use 1000 tasks to execute Sql, after about 300 tasks Successfully Completed, lots of exception about timeout error start to occur on ExecuteNonQuery(),
then next error This SqlTransaction has completed will occur on transaction.RollBack(); and its call stack also contains ZombieCheck().
(If single program with 1000 tasks pressure not enough, you can execute multiple compiled exe file at the same time, or even use multi computers execute to one DataBase.)
So I guess one of the reason cause this error can be something wrong in Connection, then cause the transaction error happens as well.
Task[] tasks = new Task[1000];
for (int i = 0; i < 1000; i++)
{
int j = i;
tasks[i] = new Task(() =>
ExecuteSqlTransaction("YourConnectionString", j)
);
}
foreach (Task task in tasks)
{
task.Start();
}
/////////////
public void ExecuteSqlTransaction(string connectionString, int exeSqlCou)
{
using (SqlConnection connection = new SqlConnection(connectionString))
{
connection.Open();
SqlCommand command = connection.CreateCommand();
SqlTransaction transaction;
// Start a local transaction.
transaction = connection.BeginTransaction();
// Must assign both transaction object and connection
// to Command object for a pending local transaction
command.Connection = connection;
command.Transaction = transaction;
try
{
command.CommandText =
"select * from Employee";
command.ExecuteNonQuery();
// Attempt to commit the transaction.
transaction.Commit();
Console.WriteLine("Execute Sql to database."
+ exeSqlCou);
}
catch (Exception ex)
{
Console.WriteLine("Commit Exception Type: {0}", ex.GetType());
Console.WriteLine(" Message: {0}", ex.Message);
// Attempt to roll back the transaction.
try
{
transaction.Rollback();
}
catch (Exception ex2)
{
// This catch block will handle any errors that may have occurred
// on the server that would cause the rollback to fail, such as
// a closed connection.
Console.WriteLine("Rollback Exception Type: {0}", ex2.GetType());
Console.WriteLine(" Message: {0}", ex2.Message);
}
}
}
}
Besides I find if I commit twice sequentailly will invoke this exception as well.
transaction.Commit();
transaction.Commit();
Or if Connection Closed before commit also invoke this error.
connection.Close();
transaction.Commit();
Update:
I find it strange that I create another new table and insert 500 thousand data to it,
then use 100000 tasks with select * from newtable sql, running 5 programs at the same time, this time the Timeout Error occur, but when transaction.Rollback() it didn't invoke the SQLTransaction has completed error.
but if the Timeout Error occur, jump into the catch block, and in the catch block do transaction.Commit() again, the SQLTransaction has completed error will happen.
I have experienced this error once and i was stuck and unable to know what is going wrong. Actually i was deleting a record and in the Stored procedure i was not deleting its child and specially the delete statement in Stored Procedure was inside the Transaction boundary. I removed that transaction code from stored procedure and got rid of getting this Error of “This SqlTransaction has completed; it is no longer usable.”
This message is simply because that you wrote code that throws an exception after the transaction has been already committed successfully.Please try to check the code you wrote after the Commit method or you can handle it by using Try..Catch and finally Blocks :) .