Ok sorry this might seem like a dumb question but I cannot figure this thing out :
I am trying to parse a string and simply want to check whether it only contains the following characters : '0123456789dD+ '
I have tried many things but just can't get to figure out the right regex to use!
Regex oReg = new Regex(#"[\d dD+]+");
oReg.IsMatch("e4");
will return true even though e is not allowed...
I've tried many strings, including Regex("[1234567890 dD+]+")...
It always works on Regex Pal but not in C#...
Please advise and again i apologize this seems like a very silly question
Try this:
#"^[0-9dD+ ]+$"
The ^ and $ at the beginning and end signify the beginning and end of the input string respectively. Thus between the beginning and then end only the stated characters are allowed. In your example, the regex matches if the string contains one of the characters even if it contains other characters as well.
#comments: Thanks, I fixed the missing + and space.
Oops, you forgot the boundaries, try:
Regex oReg = new Regex(#"^[0-9dD +]+$");
oReg.IsMatch("e4");
^ matches the begining of the text stream, $ matches the end.
It is matching the 4; you need ^ and $ to terminate the regex if you want a full match for the entire string - i.e.
Regex re = new Regex(#"^[\d dD+]+$");
Console.WriteLine(re.IsMatch("e4"));
Console.WriteLine(re.IsMatch("4"));
This is because regular expressions can also match parts of the input, in this case it just matches the "4" of "e4". If you want to match a whole line, you have to surround the regex with "^" (matches line start) and "$" (matches line end).
So to make your example work, you have to write is as follows:
Regex oReg = new Regex(#"^[\d dD+]+$");
oReg.IsMatch("e4");
I believe it's returning True because it's finding the 4. Nothing in the regex excludes the letter e from the results.
Another option is to invert everything, so it matches on characters you don't want to allow:
Regex oReg = new Regex(#"[^0-9dD+]");
!oReg.IsMatch("e4");
Related
I need a regex that will only find matches where the entire string matches my query.
For instance if I do a search for movies with the name "Red October" I only want to match on that exact title (case insensitive) but not match titles like "The Hunt For Red October". Not quite sure I know how to do this. Anyone know?
Thanks!
Try the following regular expression:
^Red October$
By default, regular expressions are case sensitive. The ^ marks the start of the matching text and $ the end.
Generally, and with default settings, ^ and $ anchors are a good way of ensuring that a regex matches an entire string.
A few caveats, though:
If you have alternation in your regex, be sure to enclose your regex in a non-capturing group before surrounding it with ^ and $:
^foo|bar$
is of course different from
^(?:foo|bar)$
Also, ^ and $ can take on a different meaning (start/end of line instead of start/end of string) if certain options are set. In text editors that support regular expressions, this is usually the default behaviour. In some languages, especially Ruby, this behaviour cannot even be switched off.
Therefore there is another set of anchors that are guaranteed to only match at the start/end of the entire string:
\A matches at the start of the string.
\Z matches at the end of the string or before a final line break.
\z matches at the very end of the string.
But not all languages support these anchors, most notably JavaScript.
I know that this may be a little late to answer this, but maybe it will come handy for someone else.
Simplest way:
var someString = "...";
var someRegex = "...";
var match = Regex.Match(someString , someRegex );
if(match.Success && match.Value.Length == someString.Length){
//pass
} else {
//fail
}
Use the ^ and $ modifiers to denote where the regex pattern sits relative to the start and end of the string:
Regex.Match("Red October", "^Red October$"); // pass
Regex.Match("The Hunt for Red October", "^Red October$"); // fail
You need to enclose your regex in ^ (start of string) and $ (end of string):
^Red October$
If the string may contain regex metasymbols (. { } ( ) $ etc), I propose to use
^\QYourString\E$
\Q starts quoting all the characters until \E.
Otherwise the regex can be unappropriate or even invalid.
If the language uses regex as string parameter (as I see in the example), double slash should be used:
^\\QYourString\\E$
Hope this tip helps somebody.
Sorry, but that's a little unclear.
From what i read, you want to do simple string compare. You don't need regex for that.
string myTest = "Red October";
bool isMatch = (myTest.ToLower() == "Red October".ToLower());
Console.WriteLine(isMatch);
isMatch = (myTest.ToLower() == "The Hunt for Red October".ToLower());
You can do it like this Exemple if i only want to catch one time the letter minus a in a string and it can be check with myRegex.IsMatch()
^[^e][e]{1}[^e]$
I need some help on a problem.
In fact I search to check for an image type by the hexadecimal code.
string JpgHex = "FF-D8-FF-E0-xx-xx-4A-46-49-46-00";
Then I have a condition on
string.StartsWith(pngHex).
The problem is that the "x" characters presents in my "JpgHex" string can be whatever I want.
I think I need a regex to check that but I don't know how!!
Thanks a lot!
I'm not quite clear what exactly you want to do, but the dot '.' character represents any character in Regex.
So the regex "^FF-D8-FF-E0-..-..-4A-46-49-46-00" will probably do the trick. '^' = Start of input.
If you want to allow only hex chars you can use "^FF-D8-FF-E0-[0-9A-F]{2}-[0-9A-F]{2}-4A-46-49-46-00".
Like I said, I'd need a better idea of what pattern you need to match.
Here are some examples:
Regex rgx =
new Regex(#"^FF-D8-FF-E0-[a-zA-Z0-9]{2}-[a-zA-Z0-9]{2}-4A-46-49-46-00$");
rgx.IsMatch(pngHex); // is match will return a bool.
I use [a-zA-Z0-9]{2} to denote two instances of a character, caps or small or a number. So the above regex would match :
FF-D8-FF-E0-aa-zZ-4A-46-49-46-00
FF-D8-FF-E0-11-22-4A-46-49-46-00
.. etc
Based on your need change the regex accordingly so for capitals and numbers only you change to [A-Z0-9]. The {2} denotes two occurrences.
The ^ denotes the string should start with FF and $ means the string should end with 00.
Lets say you wanted to only match two numbers, so you would use \d{2}, the whole thing would look like this:
Regex rgx = new Regex(#"^FF-D8-FF-E0-\d{2}-\d{2}-4A-46-49-46-00$");
rgx.IsMatch(pngHex);
How do I know of these magical characters? Simple, there are docs everywhere. See this MSDN page for some basic regex patterns. This page shows some quantifiers, those are things like match one or more or match only one.
Cheat-sheets also come in handy.
A regex would help you; you can use the following tool to help you test and learn: -
http://derekslager.com/blog/posts/2007/09/a-better-dotnet-regular-expression-tester.ashx
I recommend you have a play because then you'll learn!
To simply match any character in place of the x, the following should work: -
"^FF-D8-FF-E0-..-..-4A-46-49-46-00$"
In C#, it would be something like this: -
var test = "FF-D8-FF-E0-AB-CD-4A-46-49-46-00";
var foo = new Regex("^FF-D8-FF-E0-..-..-4A-46-49-46-00$");
if (foo.IsMatch(test))
{
// Do magic
}
You will need to read up on regular expressions to understand some of the characters that may not look familiar, i.e. ^ and $. See http://www.regular-expressions.info/
I have a string which is formatted like this: $20,$40,$AA,$FF. Basically, hex numbers and they can be of many bytes. I want to check if a string is in the above format, so I tried something like this:
string a = "$20,$30,$40";
Regex reg = new Regex(#"$[0-9a-fA-F],");
if (a.StartsWith(string.Format("{0}{1}", reg, reg)))
MessageBox.Show("A");
It doesn't seem to work though, is there anything I'm missing?
$ is a special character in regular expressions and means end of string. That regex won't match anything at all since you're specifying stuff after the string end. Escape the $ character like
"\$[0-9a-fA-F]{2},"
Anyway AFAIK this will not work with your string since it doesn't end with an ",". You might try:
"^(\$[0-9a-fA-F]{2},?)+$"
You can even simplify the regex by using case-insensitive regex matching:
Regex reg = new Regex(#"^(\$[0-9A-F]{2},?)+$", RegexOptions.IgnoreCase);
EDIT: corrected to match exactly 2 hexadecimal digits.
EDIT: maybe you should write your regex checking like:
if (Regex.IsMatch(a,#"^(\$[0-9A-F]{2},?)+$",RegexOptions.IgnoreCase))
{
// Do whatever
}
I think you are missing a quantifier:
"\$[0-9a-fA-F]+,"
For the problem with the comma at the end, I would simply append one at the end to keep the regex as simple as possible. But this is just the way I would do it.
There are 3 things that need to be changed:
Need to escape your $ symbol as it represents end of line.
\$
Need to tweak your regex pattern to match the entire string instead of parts.
^(\$[0-9a-fA-F]{2},+)+\$[0-9a-fA-F]{2}$
Need to change your code to use Regex.IsMatch.
string a = "$20,$30,$40";
if (Regex.IsMatch(a,#"^(\$[0-9a-fA-F]{2},+)+\$[0-9a-fA-F]{2}$",RegexOptions.IgnoreCase))
MessageBox.Show("A");
PS:
If the input string has white space like a tab or a space in between, then this regex will need to be modified. In such cases, you have to use "\s" at the right positions. For example, if you have white space around the commas like
string a = "$20 ,$30, $40";
then you need to tweak your RegEx this way:
^(\$[0-9a-fA-F]{2}\s*,+\s*)+\$[0-9a-fA-F]{2}\s*$
References:
C# Regex Testers
A Better .NET Regular Expression Tester
RegexHero tester
about Regex.IsMatch (instead of using Match)
MSDN Regex.isMatch
Usage example
C# Regular Expression Cheat Sheet
Old answer below (Ignore):
Try this:
"\$[0-9a-fA-F]{2}?[,]{0,1}"
You might also want to add a repeat modifier to your set such that it becomes;
"\$[0-9a-fA-F]+,"
I need a regex that will only find matches where the entire string matches my query.
For instance if I do a search for movies with the name "Red October" I only want to match on that exact title (case insensitive) but not match titles like "The Hunt For Red October". Not quite sure I know how to do this. Anyone know?
Thanks!
Try the following regular expression:
^Red October$
By default, regular expressions are case sensitive. The ^ marks the start of the matching text and $ the end.
Generally, and with default settings, ^ and $ anchors are a good way of ensuring that a regex matches an entire string.
A few caveats, though:
If you have alternation in your regex, be sure to enclose your regex in a non-capturing group before surrounding it with ^ and $:
^foo|bar$
is of course different from
^(?:foo|bar)$
Also, ^ and $ can take on a different meaning (start/end of line instead of start/end of string) if certain options are set. In text editors that support regular expressions, this is usually the default behaviour. In some languages, especially Ruby, this behaviour cannot even be switched off.
Therefore there is another set of anchors that are guaranteed to only match at the start/end of the entire string:
\A matches at the start of the string.
\Z matches at the end of the string or before a final line break.
\z matches at the very end of the string.
But not all languages support these anchors, most notably JavaScript.
I know that this may be a little late to answer this, but maybe it will come handy for someone else.
Simplest way:
var someString = "...";
var someRegex = "...";
var match = Regex.Match(someString , someRegex );
if(match.Success && match.Value.Length == someString.Length){
//pass
} else {
//fail
}
Use the ^ and $ modifiers to denote where the regex pattern sits relative to the start and end of the string:
Regex.Match("Red October", "^Red October$"); // pass
Regex.Match("The Hunt for Red October", "^Red October$"); // fail
You need to enclose your regex in ^ (start of string) and $ (end of string):
^Red October$
If the string may contain regex metasymbols (. { } ( ) $ etc), I propose to use
^\QYourString\E$
\Q starts quoting all the characters until \E.
Otherwise the regex can be unappropriate or even invalid.
If the language uses regex as string parameter (as I see in the example), double slash should be used:
^\\QYourString\\E$
Hope this tip helps somebody.
Sorry, but that's a little unclear.
From what i read, you want to do simple string compare. You don't need regex for that.
string myTest = "Red October";
bool isMatch = (myTest.ToLower() == "Red October".ToLower());
Console.WriteLine(isMatch);
isMatch = (myTest.ToLower() == "The Hunt for Red October".ToLower());
You can do it like this Exemple if i only want to catch one time the letter minus a in a string and it can be check with myRegex.IsMatch()
^[^e][e]{1}[^e]$
I am trying to make a regex that matches all occurrences of words that are at the start of a line and begin with #.
For example in:
#region #like
#hey
It would match #region and #hey.
This is what I have right now:
^#\w*
I apologize for posting this question. I'm sure it has a very simple answer, but I have been unable to find it. I admit that I am a regex noob.
What you've got should work, depending on what flags you pass for RegexOptions. You need to make sure you pass RegexOptions.Multiline:
var matches = Regex.Matches(input, #"^#\w*", RegexOptions.Multiline);
See the documentation I linked to above:
Multiline Multiline mode. Changes the meaning of ^ and $ so they match at the beginning and end, respectively, of any line, and not just the beginning and end of the entire string.
The regex looks fine, make sure you're using a verbatim string literal (# prefix) to define your regex, i.e. #"^#\w*" otherwise the backslash will be treated as an escape sequence.
Use this regex
^#.+?\b
.+ will ensure at least one character after # and \b indicates word boundry. ? adds non-greediness to the + operator so as to avoid matching whole string #region #like