We Keep Coding

C# - trigger key down event for active control

I found command System.Windows.Forms.SendKeys.Send() for sending keypress some key. This function work if open external app like a notepad and set focus and I will be see that my Key printed in this text field. How do same but with key down event, System.Windows.Forms.SendKeys.SendDown("A");, for example?
I tried call in Timer this command System.Windows.Forms.SendKeys.Send() but have runtime error associated with very fast taped.

You can't use the SendKeys class for that, unfortunately. You will need to go to a lower level API.
Poking a window with a keydown message
In Windows, keyboard events are sent to windows and controls via the Windows message pump. A piece of code using PostMessage should do the trick:
[DllImport("user32.dll")]
static extern bool PostMessage(IntPtr hWnd, uint Msg, int wParam, int lParam);
const uint WM_KEYDOWN = 0x0100;
void SendKeyDownToProcess(string processName, System.Windows.Forms.Keys key)
{
Process p = Process.GetProcessesByName(processName).FirstOrDefault();
if (p != null)
{
PostMessage(p.MainWindowHandle, WM_KEYDOWN, (int)key, 0);
}
}
Note that the application receiving these events may not do anything with it until a corresponding WM_KEYUP is received. You can get other message constants from here.
Poking a control other than the main window
The above code will send a keydown to the "MainWindowHandle." If you need to send it to something else (e.g. the active control) you will need to call PostMessage with a handle other than p.MainWindowHandle. The question is... how do you get that handle?
This is actually very involved... you will need to temporarily attach your thread to the window's message input and poke it to figure out what the handle is. This can only work if the current thread exists in a Windows Forms application and has an active message loop.
An explanation can be found here, as well as this example:
using System.Runtime.InteropServices;
public partial class FormMain : Form
{
[DllImport("user32.dll")]
static extern IntPtr GetForegroundWindow();
[DllImport("user32.dll")]
static extern IntPtr GetWindowThreadProcessId(IntPtr hWnd, IntPtr ProcessId);
[DllImport("user32.dll")]
static extern IntPtr AttachThreadInput(IntPtr idAttach,
IntPtr idAttachTo, bool fAttach);
[DllImport("user32.dll")]
static extern IntPtr GetFocus();
public FormMain()
{
InitializeComponent();
}
private void timerUpdate_Tick(object sender, EventArgs e)
{
labelHandle.Text = "hWnd: " +
FocusedControlInActiveWindow().ToString();
}
private IntPtr FocusedControlInActiveWindow()
{
IntPtr activeWindowHandle = GetForegroundWindow();
IntPtr activeWindowThread =
GetWindowThreadProcessId(activeWindowHandle, IntPtr.Zero);
IntPtr thisWindowThread = GetWindowThreadProcessId(this.Handle, IntPtr.Zero);
AttachThreadInput(activeWindowThread, thisWindowThread, true);
IntPtr focusedControlHandle = GetFocus();
AttachThreadInput(activeWindowThread, thisWindowThread, false);
return focusedControlHandle;
}
}
The good news-- if SendKeys worked for you, then you might not need to do all this-- SendKeys also sends messages to the main window handle.

SendKeys to a specific program without it being in focus

I am trying to use sendkeys, but send it to a non focused program. For example, I want to use sendkeys to Notepad - Untitled, without it being focused. Sorry if it's unclear, I will elaborate. My current code is this:
string txt = Regex.Replace(richTextBox3.Text, "[+^%~()]", "{$0}");
System.Threading.Thread.Sleep(1000);
SendKeys.Send(txt + "{ENTER}");
If I use SendMessage, would anyone care to show me an example of what I should do? I don't find anything I found online very useful for my issue.

The following code I found from a previous SO answer. The PostMessage API will send a Windows message to a specific Windows handle. The code below will cause the key down event to fire for all instances of Internet Explorer, without giving focus, simulating that the F5 key was pressed. A list of additional key codes can be found here.
static class Program
{
const UInt32 WM_KEYDOWN = 0x0100;
const int VK_F5 = 0x74;
[DllImport("user32.dll")]
static extern bool PostMessage(IntPtr hWnd, UInt32 Msg, int wParam, int lParam);
[STAThread]
static void Main()
{
while(true)
{
Process [] processes = Process.GetProcessesByName("iexplore");
foreach(Process proc in processes)
PostMessage(proc.MainWindowHandle, WM_KEYDOWN, VK_F5, 0);
Thread.Sleep(5000);
}
}
}

It took me a while to figure it out for myself
Also here a usefull list of Virtual Key Codes
[DllImport("user32.dll")]
public static extern IntPtr FindWindow(string lpClassName, string lpWindowName);
[DllImport("user32.dll")]
public static extern bool PostMessage(int hWnd, uint Msg, int wParam, int lParam);
private void button1_Click(object sender, EventArgs e)
{
const int WM_SYSKEYDOWN = 0x0104;
const int VK_RETURN = 0x0D;
IntPtr WindowToFind = FindWindow(null, "Notepad - Untitled"); // Window Titel
PostMessage(WindowToFind, WM_SYSKEYDOWN, VK_RETURN, 0);
}

C# SendKeys to foreground window in Windows 7 not working

I'm trying to build a global hotkey application with C# in Visual Studio 2012 to run on Windows 7. I have everything working except the SendKeys are never showing in the application.
Here is the code I am using to send the keystrokes:
Updated to debug with GetFocusedWindow example.
StringBuilder className = new StringBuilder(256);
IntPtr hWnd = GetForegroundWindow();
GetClassName(hWnd, className, className.Capacity);
Debug.WriteLine("Foreground window: {0}={1}", hWnd.ToInt32().ToString("X"), className);
hWnd = GetFocusedWindow();
GetClassName(hWnd, className, className.Capacity);
Debug.WriteLine("Focused window: {0}={1}", hWnd.ToInt32().ToString("X"), className);
SendKeys.Send("Hello World");
When I debug the program, focus Notepad, and hit the hotkey I get the following debug message and the keystrokes are never inserted into Notepad:
Foreground Window: 4F02B6=Notepad
Focused Window: 1B6026A=WindowsForms10.Window.8.app.0.bf7d44_r11_ad1
How can I send keystrokes to the current foreground window?

Foreground windows doesn't necessary mean focused window. A child window of the top-level foreground window may have the focus, while you're sending keys to its parent.
Retrieving the focused child window from another process is a bit tricky. Try the following implementation of GetFocusedWindow, use it instead of GetForegroundWindow (untested):
static IntPtr GetFocusedWindow()
{
uint currentThread = GetCurrentThreadId();
IntPtr activeWindow = GetForegroundWindow();
uint activeProcess;
uint activeThread = GetWindowThreadProcessId(activeWindow, out activeProcess);
if (currentThread != activeThread)
AttachThreadInput(currentThread, activeThread, true);
try
{
return GetFocus();
}
finally
{
if (currentThread != activeThread)
AttachThreadInput(currentThread, activeThread, false);
}
}
[DllImport("kernel32.dll")]
static extern uint GetCurrentThreadId();
[DllImport("user32.dll")]
private static extern IntPtr GetForegroundWindow();
[DllImport("user32.dll")]
static extern IntPtr GetFocus();
[DllImport("user32.dll", SetLastError = true)]
static extern bool AttachThreadInput(uint idAttach, uint idAttachTo, bool fAttach);
[DllImport("user32.dll")]
static extern uint GetWindowThreadProcessId(IntPtr hWnd, out uint lpdwProcessId);
Updated to address the comment:
When I use this function it sets the focus to my application window.
It's hard to tell what's wrong on your side, the following works for me when the focus is inside Notepad:
private async void Form1_Load(object sender, EventArgs e)
{
var className = new StringBuilder(200);
while (true)
{
await Task.Delay(500);
IntPtr focused = GetFocusedWindow();
GetClassName(focused, className, className.Capacity);
var classNameStr = className.ToString();
this.Text = classNameStr;
if (classNameStr == "Edit")
SendKeys.Send("Hello!");
}
}

Capture Key press globally but suppress only for current app and child windows regardless of focus

I'm running into a weird problem.
I have a WinForms application that opens another program (billing system emulator), sets it as a child window and then disables it. This works fine, the user cannot send any keys to the that child window, and the winforms application does its thing, sending commands to the child window.
However, it's been discovered that pushing the shift or control, even if the winforms application doesn't have focus, causes an error in the billing system emulator as they aren't valid keys. Users have taken to not using the shift or control keys while the winforms app runs but that's obviously not a practical solution.
My attempted solution was:
Global keyboard hook to capture when those keys are pressed.
Overriding OnKeyDown in the winforms application to stop those keys.
That however still doesn't solve the problem of the shift and alt keys being sent to the child window when the winforms app is not in focus. I can stop shift and alt globally while the winforms app is running but I don't think that is valid. So I need to somehow in the global hook stop the keypress for the winforms app and its children but allow globally. Any ideas/thoughts?
This is my code.

I don't think there's a good answer for your scenario... =\
Here's a hack you can try. It will "release" Control/Shift if they are down, then you send your message afterwards:
[DllImport("user32.dll", CharSet = CharSet.Auto, ExactSpelling = true, CallingConvention = CallingConvention.Winapi)]
public static extern void keybd_event(byte bVk, byte bScan, int dwFlags, int extraInfo);
[DllImport("user32.dll")]
static extern short MapVirtualKey(int wCode, int wMapType);
private void button1_Click(object sender, EventArgs e)
{
if ((Control.ModifierKeys & Keys.Shift) == Keys.Shift)
{
keybd_event((int)Keys.ShiftKey, (byte)MapVirtualKey((int)Keys.ShiftKey, 0), 2, 0); // Shift Up
}
if ((Control.ModifierKeys & Keys.Control) == Keys.Control)
{
keybd_event((int)Keys.ControlKey, (byte)MapVirtualKey((int)Keys.ControlKey, 0), 2, 0); // Control Up
}
// ... now try sending your message ...
}
This obviously isn't foolproof.

I took a look at the only constructor of the globalKeyboardHook and looks like it is designed only for global hook. You can add another overload to hook into the current running module only like this:
class globalKeyboardHook {
[DllImport("kernel32")]
private static extern int GetCurrentThreadId();
[DllImport("user32")]
private static extern IntPtr SetWindowsHookEx(int hookType, KeyBoardProc proc, IntPtr moduleHandle, int threadId);
[DllImport("user32")]
private static extern int CallNextHookEx(IntPtr hHook, int nCode, IntPtr wParam, IntPtr lParam);
public globalKeyboardHook(bool currentModuleOnly){
if(currentModuleOnly){
proc = KeyBoardCallback;
//WH_KEYBOARD = 0x2
hhook = SetWindowsHookEx(2, proc, IntPtr.Zero, GetCurrentThreadId());
} else hook();
}
public delegate int KeyBoardProc(int nCode, IntPtr wParam, IntPtr lParam);
public int KeyBoardCallback(int nCode, IntPtr wParam, IntPtr lParam) {
if (nCode >= 0) {
Keys key = (Keys)wParam;
var lp = lParam.ToInt64();
//your own handling with the key
if ((lp >> 31) == 0)//Key down
{
//your own code ...
} else { //Key up
//your own code ...
}
}
return CallNextHookEx(hHook, nCode, wParam, lParam);
}
KeyBoardProc proc;
//other code ...
}
//then use the new overload constructor instead of the parameterless constructor:
globalHook = new globalKeyboardHook(true);
NOTE: You can implement your own KeyDown and KeyUp event based on what I posted above (the comment your own code ...). After some searching I understand that the WH_KEYBOARD_LL supports global hook only while the WH_KEYBOARD is for thread hook only. That should be what you want instead of the WH_KEYBOARD_LL.
BTW, I doubt that the IMessageFilter which can be registered/added by your application can be used in this case. It also supports a PreFilterMessage method helping you to intercept any key and mouse messages at the application-level. You should try searching on that, it's easy to follow.

How do you get a child window using its control ID?

I am new to WINAPI and have figured out how to send a message to another program. The program I am using however I would like to be able to have it click on a specific button. From what I have learned by viewing Spy++ windows handles change for the programs every time they are reloaded and so do the handles for their controls. The control ID stays the same. After two days of trying to figure it out I am here.
under SendMesssageA if I specify the current handle as viewable by Spy++ and use that and run the code it works fine and clicks the button on my external application. I am attempting to use GetDlgItem as I have read that I can get the handle for the control (child window) using it. I am doing something wrong however since no matter what I do it returns 0 or 'null'.
How can I get GetDlgItem to return the child control handle so that I may use it to sendmessage to click that control in the external application?
Thanks for your help an input ahead of time.
[DllImport("User32.dll")]
static extern bool SetForegroundWindow(IntPtr hWnd);
Process[] myProcess = Process.GetProcessesByName("program name here");
[DllImport("user32.dll", CharSet = CharSet.Auto)]
static extern int SendMessageA(IntPtr hwnd, int wMsg, int wParam, uint lParam);
[DllImport("user32.dll", CharSet = CharSet.Auto)]
public static extern IntPtr GetDlgItem(int hwnd, int childID);
public const int WM_LBUTTONDOWN = 0x0201;
public const int WM_LBUTTONUP = 0x0202;
public void SendClick()
{
IntPtr hwnd = myProcess[0].MainWindowHandle;
SetForegroundWindow(hwnd);
int intCID = 1389;
IntPtr ptrTest = GetDlgItem(hwnd, intCID);
SendKeys.SendWait(" ");
Thread.Sleep(1000);
SendKeys.SendWait("various text to be sent here");
Thread.Sleep(1000);
SendKeys.SendWait("{ENTER}");
Thread.Sleep(1000);
SendMessageA(ptrTest, WM_LBUTTONDOWN, WM_LBUTTONDOWN, 0);
}

I think you have to use the Win32 API to find the "receiving" application window, and then find a child window of that handle.
This is something I found googling Win32 API FindWindow
http://www.c-sharpcorner.com/UploadFile/shrijeetnair/win32api12062005005528AM/win32api.aspx