Imagine the following scenario in a Xamarin solution:
Assembly A (PCL):
public abstract class MyBaseClass
{
public MyBaseClass()
{
[...]
}
[...]
}
Assembly B (3rd Party Library):
public class SomeLibClass
{
[...]
public void MethodThatCreatesClass(Type classType){
[...]
//I want to allow this to work
var obj = Activator.CreateInstance(classType);
[...]
}
[...]
}
Assembly C (Main project):
public class ClassImplA:MyBaseClass{
[...]
}
public class ClassImplA:MyBaseClass{
[...]
}
public class TheProblem{
public void AnExample(){
[...]
//I want to block these instantiations for this Assembly and any other with subclasses of MyBaseClass
var obj1 = new ClassImplA()
var obj2 = new ClassImplB()
[...]
}
}
How can I prevent the subclasses from being instantiated on their own assembly and allow them only on the super class and the 3rd Party Library (using Activator.CreateInstance)?
Attempt 1
I though I could make the base class with an internal constructor but then, I saw how silly that was because the subclasses wouldn't be able to inherit the constructor and so they wouldn't be able to inherit from the superclass.
Attempt 2
I tried using Assembly.GetCallingAssembly on the base class, but that is not available on PCL projects. The solution I found was to call it through reflection but it also didn't work since the result of that on the base class would be the Assembly C for both cases (and I think that's because who calls the constructor of MyBaseClass is indeed the default constructors of ClassImplA and ClassImplB for both cases).
Any other idea of how to do this? Or am I missing something here?
Update
The idea is to have the the PCL assembly abstract the main project (and some other projects) from offline synchronization.
Given that, my PCL uses its own DB for caching and what I want is to provide only a single instance for each record of the DB (so that when a property changes, all assigned variables will have that value and I can ensure that since no one on the main project will be able to create those classes and they will be provided to the variables by a manager class which will handle the single instantions).
Since I'm using SQLite-net for that and since it requires each instance to have an empty constructor, I need a way to only allow the SQLite and the PCL assemblies to create those subclasses declared on the main project(s) assembly(ies)
Update 2
I have no problem if the solution to this can be bypassed with Reflection because my main focus is to prevent people of doing new ClassImplA on the main project by simple mistake. However if possible I would like to have that so that stuff like JsonConvert.DeserializeObject<ClassImplA> would in fact fail with an exception.
I may be wrong but none of the access modifiers will allow you to express such constraints - they restrict what other entities can see, but once they see it, they can use it.
You may try to use StackTrace class inside the base class's constructor to check who is calling it:
public class Base
{
public Base()
{
Console.WriteLine(
new StackTrace()
.GetFrame(1)
.GetMethod()
.DeclaringType
.Assembly
.FullName);
}
}
public class Derived : Base
{
public Derived() { }
}
With a bit of special cases handling it will probably work with Activator class , but isn't the best solution for obvious reasons (reflection, error-prone string/assembly handling).
Or you may use some dependency that is required to do anything of substance, and that dependency can only be provided by your main assembly:
public interface ICritical
{
// Required to do any real job
IntPtr CriticalHandle { get; }
}
public class Base
{
public Base(ICritical critical)
{
if (!(critical is MyOnlyTrueImplementation))
throw ...
}
}
public class Derived : Base
{
// They can't have a constructor without ICritical and you can check that you are getting you own ICritical implementation.
public Derived(ICritical critical) : base(critical)
{ }
}
Well, other assemblies may provide their implementations of ICritical, but yours is the only one that will do any good.
Don't try to prevent entity creation - make it impossible to use entities created in improper way.
Assuming that you can control all classes that produce and consume such entities, you can make sure that only properly created entities can be used.
It can be a primitive entity tracking mechanism, or even some dynamic proxy wrapping
public class Context : IDisposable
{
private HashSet<Object> _entities;
public TEntity Create<TEntity>()
{
var entity = ThirdPartyLib.Create(typeof(TEntity));
_entities.Add(entity);
return entity;
}
public void Save<TEntity>(TEntity entity)
{
if (!_entities.Contains(entity))
throw new InvalidOperationException();
...;
}
}
It won't help to prevent all errors, but any attempt to persist "illegal" entities will blow up in the face, clearly indicating that one is doing something wrong.
Just document it as a system particularity and leave it as it is.
One can't always create a non-leaky abstraction (actually one basically never can). And in this case it seems that solving this problem is either nontrivial, or bad for performance, or both at the same time.
So instead of brooding on those issues, we can just document that all entities should be created through the special classes. Directly instantiated objects are not guaranteed to work correctly with the rest of the system.
It may look bad, but take, for example, Entity Framework with its gotchas in Lazy-Loading, proxy objects, detached entities and so on. And that is a well-known mature library.
I don't argue that you shouldn't try something better, but that is still an option you can always resort to.
I'm trying to get into the habit of coding to an interface rather than an implementation and whilst in most cases I can see the reasoning there are a few where I struggle.
Take this really simple example:
public interface IAuditLog
{
void AddLog(string log);
}
public class AuditLog : IAuditLog
{
public void AddLog(string log)
{
//implementation
}
}
To call the audit log class:
public partial class AuditLogPage : System.Web.UI.Page
{
protected void btnAddLog_Click(object sender, EventArgs e)
{
IAuditLog objAuditLog = new AuditLog();
objAuditLog.AddLog("test log");
}
}
I still have to use AuditLog when instantiating, so what's the point? If the AddLog method signature changes i'm still going to have to go through all my pages that use it and amend the code. Am I missing the point?
Thanks for any help in advance,
Wilky.
In the example if you switched out FileAuditLogger() with DatabaseAuditLogger() or EventLogAuditLogger() you can switch implementations without having to rewrite your code.
Typically you'd use an IoC container (Autofac, StructureMap, Unity, etc.) to automatically wire up the object instantiation. So instead of calling new AuditLog() you would call IoC.Container.Resolve<IAuditLog>()
Let me know if you'd like more information.
Let imagine that there there are two AuditLog classes
class AuditLogToDatabase : IAuditLog // writes to database
and another is
class AuditLogToFile : IAuditLog // writes to file
like
protected void btnAddLog_Click(object sender, EventArgs e)
{
IAuditLog objAuditLog = AuditLogFactory.GetAuditLog();
objAuditLog.AddLog("test log");
}
now you can inject any class based on some configuration at run time without changing the actual implementation
This doesn't necessarily mean that you have to actually use a C# interface. An interface in OOP terms is the publicly visible façade of an API. It's a contract and externally visible results of operations should be specified. How exactly it works beneath the surface should be irrelevant so that you can swap out the implementation at any time.
Of course, in that regard an interface is a method of being able to use different implementations, but so is an abstract base class or even a non-abstract class others can derive from.
But more to the exact point of your question: Of course, when instantiating a class its type must be known, but you don't necessarily have to create the class instance there. You could set an IAuditLog from the outside or get it via a factory class, etc. where you wouldn't know, at that exact point in the code, what exact type you're getting (except that it's compatible with IAuditLog).
This is actually useful when you create the AuditLog instance from a method say like a Factory method and you have more than one AuditLogXXX classes derived from the IAuditLog interface.
So, instead of using this code:
IAuditLog objAuditLog = new AuditLog();
You would actually use this code when you program to an interface:
IAuditLog objAuditLog = LogFactory.GetAuditLog(); //This call is programmed to an interface
where GetAuditLog() is an interface typed method defined on the LogFactory class as below:
class LogFactory
{
public IAuditLog GetAuditLog() // This method is programmed to an interface
{
//Some logic to make a choice to return appropriate AuditLogXXX instance from the factory
}
}
I have a question concerning holding common code in a base class and having the derived class call it, even though the derived class's trigger method has been dispatched from the base. So, base->derived->base type call stack.
Is the following look OK, or does it smell? I have numbered the flow steps...
public abstract class LayerSuperType
{
public void DoSomething() // 1) Initial call from client
{
ImplementThis(); // 2) Polymorphic dispatch
}
protected abstract void ImplementThis();
protected void SomeCommonMethodToSaveOnDuplication(string key) // 4)
{
Configuration config = GetConfiguration(key);
}
}
public class DerivedOne : LayerSuperType
{
protected virtual void ImplementThis() // 2)
{
SomeCommonMethodToSaveOnDuplication("whatever"); // 3) Call method in base
}
}
public class DerivedTwo : LayerSuperType
{
protected virtual void ImplementThis() // 2)
{
SomeCommonMethodToSaveOnDuplication("something else"); // 3) Call method in base
}
}
That looks absolutely fine. Perfect example of why you'd use an abstract class over an interface. It's a bit like a strategy pattern and I have used this fairly regularly and successfully.
Make sure that what the class doing is still dealing with one 'concern' though, only doing one task. If your base class does repository access but the objects are representing documents, don't put the functionality in the base class, use a separate repository pattern/object.
Looks like a very simplified Template Method Pattern where your sub-classes do some specific kinds of things at the right points in the implementation of your algorithm, but the overall flow is directed by a method on the base class. You've also provided some services to your sub-classes in the form of base class methods; that's ok too as long as you're good as far as SOLID goes.
Why not public abstract void DoSomething() and forget about ImplementThis() altogether?
The only reason I can see to leave ImplementThis() is if you want to maintain a consistent interface with DoSomething() which later on down the road will allow the signature of ImplementThis() to change without a breaking change to callers.
I agree that you should maintain a single concern with the class's responsibility but from an overall OOP perspective this looks fine to me. I've done similar on many occasions.
It does smell a little that SomeCommonMethodToSaveOnDuplication is being called in two different ways. It seems to be doing two unrelated things. Why not have two methods?
Closed. This question is opinion-based. It is not currently accepting answers.
Want to improve this question? Update the question so it can be answered with facts and citations by editing this post.
Closed 5 years ago.
Improve this question
The C++ friend keyword allows a class A to designate class B as its friend. This allows Class B to access the private/protected members of class A.
I've never read anything as to why this was left out of C# (and VB.NET). Most answers to this earlier StackOverflow question seem to be saying it is a useful part of C++ and there are good reasons to use it. In my experience I'd have to agree.
Another question seems to me to be really asking how to do something similar to friend in a C# application. While the answers generally revolve around nested classes, it doesn't seem quite as elegant as using the friend keyword.
The original Design Patterns book uses it regularly throughout its examples.
So in summary, why is friend missing from C#, and what is the "best practice" way (or ways) of simulating it in C#?
(By the way, the internal keyword is not the same thing, it allows all classes within the entire assembly to access internal members, while friend allows you to give a certain class complete access to exactly one other class)
On a side note.
Using friend is not about violating the encapsulation, but on the contrary it's about enforcing it. Like accessors+mutators, operators overloading, public inheritance, downcasting, etc., it's often misused, but it does not mean the keyword has no, or worse, a bad purpose.
See Konrad Rudolph's message in the other thread, or if you prefer see the relevant entry in the C++ FAQ.
Having friends in programming is more-or-less considered "dirty" and easy to abuse. It breaks the relationships between classes and undermines some fundamental attributes of an OO language.
That being said, it is a nice feature and I've used it plenty of times myself in C++; and would like to use it in C# too. But I bet because of C#'s "pure" OOness (compared to C++'s pseudo OOness) MS decided that because Java has no friend keyword C# shouldn't either (just kidding ;))
On a serious note: internal is not as good as friend but it does get the job done. Remember that it is rare that you will be distributing your code to 3rd party developers not through a DLL; so as long as you and your team know about the internal classes and their use you should be fine.
EDIT Let me clarify how the friend keyword undermines OOP.
Private and protected variables and methods are perhaps one of the most important part of OOP. The idea that objects can hold data or logic that only they can use allows you to write your implementation of functionality independent of your environment - and that your environment cannot alter state information that it is not suited to handle. By using friend you are coupling two classes' implementations together - which is much worse then if you just coupled their interface.
For info, another related-but-not-quite-the-same thing in .NET is [InternalsVisibleTo], which lets an assembly designate another assembly (such as a unit test assembly) that (effectively) has "internal" access to types/members in the original assembly.
In fact, C# gives possibility to get same behavior in pure OOP way without special words - it's private interfaces.
As far as question What is the C# equivalent of friend? was marked as duplicate to this article and no one there propose really good realization - I will show answer on both question here.
Main idea was taking from here: What is a private interface?
Let's say, we need some class which could manage instances of another classes and call some special methods on them. We don't want to give possibility to call this methods to any other classes. This is exactly same thing what friend c++ keyword do in c++ world.
I think good example in real practice could be Full State Machine pattern where some controller update current state object and switch to another state object when necessary.
You could:
The easiest and worst way to make Update() method public - hope
everyone understand why it's bad.
Next way is to mark it as internal. It's good enough if you put your
classes to another assembly but even then each class in that assembly
could call each internal method.
Use private/protected interface - and I followed this way.
Controller.cs
public class Controller
{
private interface IState
{
void Update();
}
public class StateBase : IState
{
void IState.Update() { }
}
public Controller()
{
//it's only way call Update is to cast obj to IState
IState obj = new StateBase();
obj.Update();
}
}
Program.cs
class Program
{
static void Main(string[] args)
{
//it's impossible to write Controller.IState p = new Controller.StateBase();
//Controller.IState is hidden
var p = new Controller.StateBase();
//p.Update(); //is not accessible
}
}
Well, what about inheritance?
We need to use technique described in Since explicit interface member implementations cannot be declared virtual and mark IState as protected to give possibility to derive from Controller too.
Controller.cs
public class Controller
{
protected interface IState
{
void Update();
}
public class StateBase : IState
{
void IState.Update() { OnUpdate(); }
protected virtual void OnUpdate()
{
Console.WriteLine("StateBase.OnUpdate()");
}
}
public Controller()
{
IState obj = new PlayerIdleState();
obj.Update();
}
}
PlayerIdleState.cs
public class PlayerIdleState: Controller.StateBase
{
protected override void OnUpdate()
{
base.OnUpdate();
Console.WriteLine("PlayerIdleState.OnUpdate()");
}
}
And finally example how to test class Controller throw inheritance:
ControllerTest.cs
class ControllerTest: Controller
{
public ControllerTest()
{
IState testObj = new PlayerIdleState();
testObj.Update();
}
}
Hope I cover all cases and my answer was useful.
You should be able to accomplish the same sorts of things that "friend" is used for in C++ by using interfaces in C#. It requires you to explicitly define which members are being passed between the two classes, which is extra work but may also make the code easier to understand.
If somebody has an example of a reasonable use of "friend" that cannot be simulated using interfaces, please share it! I'd like to better understand the differences between C++ and C#.
With friend a C++ designer has precise control over whom the private* members are exposed to. But, he's forced to expose every one of the private members.
With internal a C# designer has precise control over the set of private members he’s exposing. Obviously, he can expose just a single private member. But, it will get exposed to all classes in the assembly.
Typically, a designer desires to expose only a few private methods to selected few other classes. For example, in a class factory pattern it may be desired that class C1 is instantiated only by class factory CF1. Therefore class C1 may have a protected constructor and a friend class factory CF1.
As you can see, we have 2 dimensions along which encapsulation can be breached. friend breaches it along one dimension, internal does it along the other. Which one is a worse breach in the encapsulation concept? Hard to say. But it would be nice to have both friend and internal available. Furthermore, a good addition to these two would be the 3rd type of keyword, which would be used on member-by-member basis (like internal) and specifies the target class (like friend).
* For brevity I will use "private" instead of "private and/or protected".
- Nick
You can get close to C++ "friend" with the C# keyword "internal".
Friend is extremely useful when writing unit test.
Whilst that comes at a cost of polluting your class declaration slightly, it's also a compiler-enforced reminder of what tests actually might care about the internal state of the class.
A very useful and clean idiom I've found is when I have factory classes, making them friends of the items they create which have a protected constructor. More specifically, this was when I had a single factory responsible for creating matching rendering objects for report writer objects, rendering to a given environment. In this case you have a single point of knowledge about the relationship between the report-writer classes (things like picture blocks, layout bands, page headers etc.) and their matching rendering objects.
C# is missing the "friend" keyword for the same reason its missing deterministic destruction. Changing conventions makes people feel smart, as if their new ways are superior to someone else' old ways. It's all about pride.
Saying that "friend classes are bad" is as short-sighted as other unqualified statements like "don't use gotos" or "Linux is better than Windows".
The "friend" keyword combined with a proxy class is a great way to only expose certain parts of a class to specific other class(es). A proxy class can act as a trusted barrier against all other classes. "public" doesn't allow any such targeting, and using "protected" to get the effect with inheritance is awkward if there really is no conceptual "is a" relationship.
This is actually not an issue with C#. It's a fundamental limitation in IL. C# is limited by this, as is any other .Net language that seeks to be verifiable. This limitation also includes managed classes defined in C++/CLI (Spec section 20.5).
That being said I think that Nelson has a good explanation as to why this is a bad thing.
Stop making excuses for this limitation. friend is bad, but internal is good? they are the same thing, only that friend gives you more precise control over who is allowed to access and who isn't.
This is to enforce the encapsulation paradigm? so you have to write accessor methods and now what? how are you supposed to stop everyone (except the methods of class B) from calling these methods? you can't, because you can't control this either, because of missing "friend".
No programming language is perfect. C# is one of the best languages I've seen, but making silly excuses for missing features doesn't help anyone. In C++, I miss the easy event/delegate system, reflection (+automatic de/serialization) and foreach, but in C# I miss operator overloading (yeah, keep telling me that you didn't need it), default parameters, a const that cannot be circumvented, multiple inheritance (yeah, keep telling me that you didn't need it and interfaces were a sufficient replacement) and the ability to decide to delete an instance from memory (no, this is not horribly bad unless you are a tinkerer)
I will answer only "How" question.
There are so many answers here, however I would like to propose kind of "design pattern" to achieve that feature. I will use simple language mechanism, which includes:
Interfaces
Nested class
For example we have 2 main classes: Student and University. Student has GPA which only university allowed to access. Here is the code:
public interface IStudentFriend
{
Student Stu { get; set; }
double GetGPS();
}
public class Student
{
// this is private member that I expose to friend only
double GPS { get; set; }
public string Name { get; set; }
PrivateData privateData;
public Student(string name, double gps) => (GPS, Name, privateData) = (gps, name, new PrivateData(this);
// No one can instantiate this class, but Student
// Calling it is possible via the IStudentFriend interface
class PrivateData : IStudentFriend
{
public Student Stu { get; set; }
public PrivateData(Student stu) => Stu = stu;
public double GetGPS() => Stu.GPS;
}
// This is how I "mark" who is Students "friend"
public void RegisterFriend(University friend) => friend.Register(privateData);
}
public class University
{
var studentsFriends = new List<IStudentFriend>();
public void Register(IStudentFriend friendMethod) => studentsFriends.Add(friendMethod);
public void PrintAllStudentsGPS()
{
foreach (var stu in studentsFriends)
Console.WriteLine($"{stu.Stu.Name}: stu.GetGPS()");
}
}
public static void Main(string[] args)
{
var Technion = new University();
var Alex = new Student("Alex", 98);
var Jo = new Student("Jo", 91);
Alex.RegisterFriend(Technion);
Jo.RegisterFriend(Technion);
Technion.PrintAllStudentsGPS();
Console.ReadLine();
}
There is the InternalsVisibleToAttribute since .Net 3 but I suspect they only added it to cater to test assemblies after the rise of unit testing. I can't see many other reasons to use it.
It works at the assembly level but it does the job where internal doesn't; that is, where you want to distribute an assembly but want another non-distributed assembly to have privileged access to it.
Quite rightly they require the friend assembly to be strong keyed to avoid someone creating a pretend friend alongside your protected assembly.
I have read many smart comments about "friend" keyword & i agree what it is useful thing, but i think what "internal" keyword is less useful, & they both still bad for pure OO programming.
What we have? (saying about "friend" I also saying about "internal")
is using "friend" makes code less pure regarding to oo?
yes;
is not using "friend" makes code better?
no, we still need to make some private relationships between classes, & we can do it only if we break our beautiful encapsulation, so it also isn`t good, i can say what it even more evil than using "friend".
Using friend makes some local problems, not using it makes problems for code-library-users.
the common good solution for programming language i see like this:
// c++ style
class Foo {
public_for Bar:
void addBar(Bar *bar) { }
public:
private:
protected:
};
// c#
class Foo {
public_for Bar void addBar(Bar bar) { }
}
What do you think about it? I think it the most common & pure object-oriented solution. You can open access any method you choose to any class you want.
I suspect it has something to do with the C# compilation model -- building IL the JIT compiling that at runtime. i.e.: the same reason that C# generics are fundamentally different to C++ generics.
you can keep it private and use reflection to call functions. Test framework can do this if you ask it to test a private function
I used to regularly use friend, and I don't think it's any violation of OOP or a sign of any design flaw. There are several places where it is the most efficient means to the proper end with the least amount of code.
One concrete example is when creating interface assemblies that provide a communications interface to some other software. Generally there are a few heavyweight classes that handle the complexity of the protocol and peer peculiarities, and provide a relatively simple connect/read/write/forward/disconnect model involving passing messages and notifications between the client app and the assembly. Those messages / notifications need to be wrapped in classes. The attributes generally need to be manipulated by the protocol software as it is their creator, but a lot of stuff has to remain read-only to the outside world.
It's just plain silly to declare that it's a violation of OOP for the protocol / "creator" class to have intimate access to all of the created classes -- the creator class has had to bit munge every bit of data on the way up. What I've found most important is to minimize all the BS extra lines of code the "OOP for OOP's Sake" model usually leads to. Extra spaghetti just makes more bugs.
Do people know that you can apply the internal keyword at the attribute, property, and method level? It's not just for the top level class declaration (though most examples seem to show that.)
If you have a C++ class that uses the friend keyword, and want to emulate that in a C# class:
1. declare the C# class public
2. declare all the attributes/properties/methods that are protected in C++ and thus accessible to friends as internal in C#
3. create read only properties for public access to all internal attributes and properties
I agree it's not 100% the same as friend, and unit test is a very valuable example of the need of something like friend (as is protocol analyzer logging code). However internal provides the exposure to the classes you want to have exposure, and [InternalVisibleTo()] handles the rest -- seems like it was born specifically for unit test.
As far as friend "being better because you can explicitely control which classes have access" -- what in heck are a bunch of suspect evil classes doing in the same assembly in the first place? Partition your assemblies!
The friendship may be simulated by separating interfaces and implementations. The idea is: "Require a concrete instance but restrict construction access of that instance".
For example
interface IFriend { }
class Friend : IFriend
{
public static IFriend New() { return new Friend(); }
private Friend() { }
private void CallTheBody()
{
var body = new Body();
body.ItsMeYourFriend(this);
}
}
class Body
{
public void ItsMeYourFriend(Friend onlyAccess) { }
}
In spite of the fact that ItsMeYourFriend() is public only Friend class can access it, since no one else can possibly get a concrete instance of the Friend class. It has a private constructor, while the factory New() method returns an interface.
See my article Friends and internal interface members at no cost with coding to interfaces for details.
Some have suggested that things can get out of control by using friend. I would agree, but that doesn't lessen its usefulness. I'm not certain that friend necessarily hurts the OO paradigm any more than making all your class members public. Certainly the language will allow you to make all your members public, but it is a disciplined programmer that avoids that type of design pattern. Likewise a disciplined programmer would reserve the use of friend for specific cases where it makes sense. I feel internal exposes too much in some cases. Why expose a class or method to everything in the assembly?
I have an ASP.NET page that inherits my own base page, that in turn inherits System.Web.UI.Page. In this page, I have some code that handles end-user error reporting for the application in a protected method
ReportError("Uh Oh!");
Now, I have a user control that is contained in the page. I want the user control to be able to call the error reporting methods in the page.
MyBasePage bp = Page as MyBasePage;
bp.ReportError("Uh Oh");
It can't do that if the ReportError method is protected. I can make it internal, but it is exposed to any code in the assembly. I just want it exposed to the UI elements that are part of the current page (including child controls). More specifically, I want my base control class to define the exact same error reporting methods, and simply call methods in the base page.
protected void ReportError(string str) {
MyBasePage bp = Page as MyBasePage;
bp.ReportError(str);
}
I believe that something like friend could be useful and implemented in the language without making the language less "OO" like, perhaps as attributes, so that you can have classes or methods be friends to specific classes or methods, allowing the developer to provide very specific access. Perhaps something like...(pseudo code)
[Friend(B)]
class A {
AMethod() { }
[Friend(C)]
ACMethod() { }
}
class B {
BMethod() { A.AMethod() }
}
class C {
CMethod() { A.ACMethod() }
}
In the case of my previous example perhaps have something like the following (one can argue semantics, but I'm just trying to get the idea across):
class BasePage {
[Friend(BaseControl.ReportError(string)]
protected void ReportError(string str) { }
}
class BaseControl {
protected void ReportError(string str) {
MyBasePage bp = Page as MyBasePage;
bp.ReportError(str);
}
}
As I see it, the friend concept has no more risk to it than making things public, or creating public methods or properties to access members. If anything friend allows another level of granularity in accessibility of data and allows you to narrow that accessibility rather than broadening it with internal or public.
If you are working with C++ and you find your self using friend keyword, it is a very strong indication, that you have a design issue, because why the heck a class needs to access the private members of other class??
B.s.d.
It was stated that, friends hurts pure OOness. Which I agree.
It was also stated that friends help encapsulation, which I also agree.
I think friendship should be added to the OO methodology, but not quite as it in C++. I'd like to have some fields/methods that my friend class can access, but I'd NOT like them to access ALL my fields/methods. As in real life, I'd let my friends access my personal refrigerator but I'd not let them to access my bank account.
One can implement that as followed
class C1
{
private void MyMethod(double x, int i)
{
// some code
}
// the friend class would be able to call myMethod
public void MyMethod(FriendClass F, double x, int i)
{
this.MyMethod(x, i);
}
//my friend class wouldn't have access to this method
private void MyVeryPrivateMethod(string s)
{
// some code
}
}
class FriendClass
{
public void SomeMethod()
{
C1 c = new C1();
c.MyMethod(this, 5.5, 3);
}
}
That will of course generate a compiler warning, and will hurt the intellisense. But it will do the work.
On a side note, I think that a confident programmer should do the testing unit without accessing the private members. this is quite out of the scope, but try to read about TDD.
however, if you still want to do so (having c++ like friends) try something like
#if UNIT_TESTING
public
#else
private
#endif
double x;
so you write all your code without defining UNIT_TESTING and when you want to do the unit testing you add #define UNIT_TESTING to the first line of the file(and write all the code that do the unit testing under #if UNIT_TESTING). That should be handled carefully.
Since I think that unit testing is a bad example for the use of friends, I'd give an example why I think friends can be good. Suppose you have a breaking system (class). With use, the breaking system get worn out and need to get renovated. Now, you want that only a licensed mechanic would fix it. To make the example less trivial I'd say that the mechanic would use his personal (private) screwdriver to fix it. That's why mechanic class should be friend of breakingSystem class.
The friendship may also be simulated by using "agents" - some inner classes. Consider following example:
public class A // Class that contains private members
{
private class Accessor : B.BAgent // Implement accessor part of agent.
{
private A instance; // A instance for access to non-static members.
static Accessor()
{ // Init static accessors.
B.BAgent.ABuilder = Builder;
B.BAgent.PrivateStaticAccessor = StaticAccessor;
}
// Init non-static accessors.
internal override void PrivateMethodAccessor() { instance.SomePrivateMethod(); }
// Agent constructor for non-static members.
internal Accessor(A instance) { this.instance = instance; }
private static A Builder() { return new A(); }
private static void StaticAccessor() { A.PrivateStatic(); }
}
public A(B friend) { B.Friendship(new A.Accessor(this)); }
private A() { } // Private constructor that should be accessed only from B.
private void SomePrivateMethod() { } // Private method that should be accessible from B.
private static void PrivateStatic() { } // ... and static private method.
}
public class B
{
// Agent for accessing A.
internal abstract class BAgent
{
internal static Func<A> ABuilder; // Static members should be accessed only by delegates.
internal static Action PrivateStaticAccessor;
internal abstract void PrivateMethodAccessor(); // Non-static members may be accessed by delegates or by overrideable members.
}
internal static void Friendship(BAgent agent)
{
var a = BAgent.ABuilder(); // Access private constructor.
BAgent.PrivateStaticAccessor(); // Access private static method.
agent.PrivateMethodAccessor(); // Access private non-static member.
}
}
It could be alot simpler when used for access only to static members.
Benefits for such implementation is that all the types are declared in the inner scope of friendship classes and, unlike interfaces, it allows static members to be accessed.