I've encountered an error deploying a site to a server. When trying to load the home page, or access authentication on the new site in IIS, I get the error:
Config Error: This configuration section cannot be used at this path.
This happens when the section is locked at a parent level. Locking is
either by default (overrideModeDefault="Deny"), or set explicitly by a
location tag with overrideMode="Deny" or the legacy
allowOverride="false".
More detail can be found here, in Scenario 7 matches my hex error code.
The solution given on the linked site above is to set Allow for overrideModeDefault in the section mentioned in my error, in the applicationHost.config file. In my case, under Security in system.webServer. But if I look at the applicationHost.config on my local computer, where the site is properly deployed already, that section is set to Deny.
If this solution is correct, how is my local instance running just fine with the same web.config? According to my applicationHost.config, that section should be locked, but it's not. I'd prefer to not change the applicationHost.config file, because there are many other sites running on that server. Is there another solution?
I had the same problem. Don't remember where I found it on the web, but here is what I did:
Click "Start button"
in the search box, enter "Turn windows features on or off"
in the features window, Click: "Internet Information Services"
Click: "World Wide Web Services"
Click: "Application Development Features"
Check (enable) the features. I checked all but CGI.
btw, I'm using Windows 7. Many comments over the years have certified this works all the way up to Windows 10 and Server 2019, as well.
You could also use the IIS Manager to edit those settings.
Care of this Learn IIS article:
Using the Feature Delegation from the root of IIS:
You can then control each of machine-level read/write permissions, which will otherwise give you the overrideMode="Deny" errors.
For Windows Server 2012 and IIS 8, the procedure is similar.
The Web Server (IIS) and Application Server should be installed, and you should also have the optional Web Server (IIS) Support under Application Server.
Browse to “C:\Windows\System32\inetsrv\config” (you will need administrator rights here)
Open applicationHost.config
Note: In IISExpress and Visual Studio 2015 the applicationHost.config is stored in $(solutionDir).vs\config\applicationhost.config
Find the section that showed up in the “config source” part of the error message page. For me this has typically been “modules” or “handlers”
Change the overrideModeDefault attribute to be Allow
So the whole line now looks like:
<section name="modules" allowDefinition="MachineToApplication" overrideModeDefault="Allow" />
After saving the file, the page loaded up fine in my browser.
Warning:
Editing applicationHost.config on 64-bit Windows
You need to unlock handlers. This can be done using following cmd command:
%windir%\system32\inetsrv\appcmd.exe unlock config -section:system.webServer/handlers
Maybe another info for people that are getting this error on IIS 8, in my case was on Microsoft Server 2012 platform. I had spend couple of hours battling with other errors that bubbled up after executing appcmd. In the end I was able to fix it by removing Web Server Role and installing it again.
1. Open "Turn windows features on or off" by: WinKey+ R => "optionalfeatures" => OK
Enable those features under "Application Development Features"
Tested on Win 10 - But probably will work on other windows versions as well.
I ran these two commands from an elevated command prompt:
%windir%/system32/inetsrv/appcmd unlock config /section:anonymousAuthentication
%windir%/system32/inetsrv/appcmd unlock config /section:windowsAuthentication
As per my answer to this similar issue;
Try unlocking the relevant IIS configuration settings at server level, as follows:
Open IIS Manager
Select the server in the Connections pane
Open Configuration Editor in the main pane
In the Sections drop down, select the section to unlock, e.g. system.webServer > defaultPath
Click Unlock Attribute in the right pane
Repeat for any other settings which you need to unlock
Restart IIS (optional) - Select the server in the Conncetions pane, click Restart in the Actions pane
This Did the trick for me, for IIS 8 Windows server 2012 R2
Go to "Turn on Features"
Then go to all default setting , Next, Next, Next etc..
Then, select as shown below,
Then reset IIS (optional) but do it safer side.
This is an additional solution as its a generic problem everyone have different of problem and thus different solution. Cheers!
The best option is to Change Application Settings from the Custom Site Delegation
Open IIS and from the root select Feature Delegation and then select Application Settings and from the right sidebar select Read/Write
On Windows Server 2012 with IIS 8 I have solved this by enabling ASP.NET 4.5 feature:
and then following ken's answer.
To fix this open up the IIS Express applicationhost.config. This file is stored at C:\Users[your user name]\Documents\IISExpress\config\applicationhost.config
Update for VS2015+: config file location is $(solutionDir).vs\config\applicationhost.config
Look for the following lines
<section name="windowsAuthentication" overrideModeDefault="Deny" />
<section name="anonymousAuthentication" overrideModeDefault="Deny" />
<add name="WindowsAuthenticationModule" lockItem="true" />
<add name="AnonymousAuthenticationModule" lockItem="true" />
Change those lines to
<section name="windowsAuthentication" overrideModeDefault="Allow" />
<section name="anonymousAuthentication" overrideModeDefault="Allow" />
<add name="WindowsAuthenticationModule" lockItem="false" />
<add name="AnonymousAuthenticationModule" lockItem="false" />
Save it and refresh Asp.net Page.
In our case on IIS 8 we found the error was produced when attempting to view Authentication" for a site, when:
The server Feature Delegation marked as "Authentication - Windows" = "Read Only"
The site had a web.config that explicitly referenced windows authentication; e.g.,
Marking the site Feature Delegation "Authentication - Windows" = "Read/Write", the error went away. It appears that, with the feature marked "Read Only", the web.config is not allowed to reference it at all even to disable it, as this apparently constitutes a write.
Seems that with IIS Express and VS 2015, there's a copy of the applicationHost.config file at $(solutionDir).vs\config\applicationhost.config so you'll need to make changes there. See this link: http://digitaldrummerj.me/iis-express-windows-authentication/
Make sure these lines are changed per below:
<section name="windowsAuthentication" overrideModeDefault="Allow" />
<section name="anonymousAuthentication" overrideModeDefault="Allow" />
<add name="WindowsAuthenticationModule" lockItem="false" />
<add name="AnonymousAuthenticationModule" lockItem="false" />
In my case it was that on server was not enabled "HTTP Activation" under .NET Framework Features. So for Windows Server 2012 the solution which worked for me was:
Server Manager -> Add roles and features -> Features -> make sure that under .NET Framework of version you want to use is checked "HTTP Activation"
The Powershell way of enabling the features (Windows Server 2012 +) - trim as needed:
Install-WindowsFeature NET-Framework-Core
Install-WindowsFeature Web-Server -IncludeAllSubFeature
Install-WindowsFeature NET-Framework-Features -IncludeAllSubFeature
Install-WindowsFeature NET-Framework-45-ASPNET -IncludeAllSubFeature
Install-WindowsFeature Application-Server -IncludeAllSubFeature
Install-WindowsFeature MSMQ -IncludeAllSubFeature
Install-WindowsFeature WAS -IncludeAllSubFeature
The error says that the configuration section is locked at the parent level.
So it will not be directly 1 config file which will resolve the issue,
we need to go through the hierarchy of the config files to see the inheritance
Check the below link to go through the File hierarchy and inheritance in IIS
https://msdn.microsoft.com/en-us/library/ms178685.aspx
So you need to check for the app config settings in the below order
ApplicationHost.config in C:windows\system32\inetsrv\config. Change the overrideModeDefault attribute to be Allow.
ApplicationName.config or web.config in the applications directory
Web.config in the root directory.
Web.config in the specific website (My issue was found at this place).
Web.config of the root web (server's configuration)
machine.config of the machine (Root's web.config and machine.config can be found at - systemroot\MicrosoftNET\Framework\versionNumber\CONFIG\Machine.config)
Go carefully through all these configs in the order of 1 to 6 and you should find it.
I noticed one answer that was similar, but in my case I used the IIS Configured Editor to find the section I wanted to "unlock".
Then I copied the path and used it in my automation to unlock it prior to changing the sections I wanted to edit.
. "$($env:windir)\system32\inetsrv\appcmd" unlock config -section:system.webServer/security/authentication/windowsAuthentication
. "$($env:windir)\system32\inetsrv\appcmd" unlock config -section:system.webServer/security/authentication/anonymousAuthentication
I needed to change the SSL settings on a subfolder when i got this nice message. In my case following action helped me out.
Opened C:\Windows\System32\inetsrv\config\applicationHost.config
And changed the value from overrideModeDefault="Deny" to "Allow"
<sectionGroup name="system.webServer">
...
<sectionGroup name="security">
<section name="access" overrideModeDefault="Allow" />
</sectionGroup>
In my case, I got this error because I was operating on the wrong configuration file.
I was doing this:
Configuration config = serverManager.GetWebConfiguration(websiteName);
ConfigurationSection serverRuntimeSection = config.GetSection("system.webServer/serverRuntime");
serverRuntimeSection["alternateHostName"] = hostname;
instead of the correct code:
Configuration config = serverManager.GetApplicationHostConfiguration();
ConfigurationSection serverRuntimeSection = configApp.GetSection("system.webServer/serverRuntime", websiteName);
serverRuntimeSection["alternateHostName"] = hostname;
in other words, I was trying to operate on the website's web.config instead of the global file C:\Windows\System32\inetsrv\config\applicationHost.config, which has a section (or can have a section) for the website. The setting I was trying to change exists only in the applicationHost.config file.
In my case, it was something else.
When I loaded the solution in a new version of Visual Studio, VS apparently created a new project-specific applicationhost.config file:
MySolutionDir\.vs\config\applicationhost.config
It started using the settings from the new config, instead of my already customized global IIS Express settings.
(\Users\%USER%\Documents\IISExpress\config\applicationhost.config)
In my case this was the setting that needed to be set. Of course it could be something else for you:
<section name="ipSecurity" overrideModeDefault="Allow" />
Received this same issue after installing IIS 7 on Vista Home Premium. To correct error I changed the following values located in the applicationHost.config file located in Windows\system32\inetsrv.
Change all of the following values located in section -->
<div mce_keep="true"><section name="handlers" overrideModeDefault="Deny" /> change this value from "Deny" to "Allow"</div>
<div mce_keep="true"><section name="modules" allowDefinition="MachineToApplication" overrideModeDefault="Deny" /> change this value from "Deny" to "Allow"</div>
Can You try this:
Go to application path where you're getting deny error, right click
Properties->Security tab
In that, change the permissions and check the checkbox read and write. Then it will work without any error hopefully.
For Windows Server 2008 and IIS 7, the procedure is similar.
please refer to this:
http://msdn.microsoft.com/en-us/library/vstudio/bb763178(v=vs.100).aspx
in add role service, u will see "Application Development Features"
Check (enable) the features. I checked all.
In my case I was getting this error when attempting to update the authentication settings in IIS also in addition to browsing. I was able to remove this error by removing the authentication setting from the web.config itself. Removing a problematic configuration section may be less invasive and preferable in some cases than changing the server roles and features too much:
Section Removed:
<security>
<authentication>
<windowsAuthentication enabled="true" />
</authentication>
</security>
I had the similar issue, but I used the following powershell script which helped me to achieve above steps in on button click.
#Install IIS
Import-Module ServerManager
Add-WindowsFeature Web-Server, Web-Asp-Net45, Web-Mgmt-Console, Web-Scripting-Tools, NET-WCF-HTTP-Activation45, Web-Windows-Auth
the list of features can be added or removed based on the requirement.
I had an issue where I was putting in the override = "Allow" values (mentioned here already)......but on a x64 bit system.......my 32 notepad++ was phantom saving them. Switching to Notepad (which is a 64bit application on a x64 bit O/S) allowed me to save the settings.
See :
http://dpotter.net/technical/2009/11/editing-applicationhostconfig-on-64-bit-windows/
The relevant text:
One of the problems I’m running down required that I view and possibly edit applicationHost.config. This file is located at %SystemRoot%\System32\inetsrv\config. Seems simple enough. I was able to find it from the command line easily, but when I went to load it in my favorite editor (Notepad++) I got a file not found error. Turns out that the System32 folder is redirected for 32-bit applications to SysWOW64. There appears to be no way to view the System32 folder using a 32-bit app. Go figure.
Fortunately, 64-bit versions of Windows ship with a 64-bit version of Notepad. As much as I dislike it, at least it works.
I had the same issue.
Resolved it by enabling Application Server feature. Restarted iis
after that.
This worked for me
Also in IIS 8 you can solve this problem by changing the server to IIS Express. Goto debug->Properties
In the Web select the server as IIS Express from the dropdown and then rebuild the solution
To make a change at Application Level (Web.Config):
Please remove the Trust Level from the web.config:
Actually I was getting this error when I was trying to host my Website on the Hosting Server where I don't have control on their Server. Removing the above line from my Application web.config solved my issue.
Recently, I deployed an MVC site builded in VS2013 into Azure. In fact, I have been done 4 deployments so far. The frist tree were deployed OK.
It was untel the last deployment when I'm getting an error saying: That the tag needs to be added in the web.config.
It's weird because while testin git locally I didn't get any error. Until, I deployed it to Azure.
This is the error I'm getting when running it in Azure:
Runtime Error
Description: An application error occurred on the server. The current custom error settings for this application prevent the details of the application error from being viewed remotely (for security reasons). It could, however, be viewed by browsers running on the local server machine.
Details: To enable the details of this specific error message to be viewable on remote machines, please create a <customErrors> tag within a "web.config" configuration file located in the root directory of the current web application. This <customErrors> tag should then have its "mode" attribute set to "Off".
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="Off"/>
</system.web>
</configuration>
Notes: The current error page you are seeing can be replaced by a custom error page by modifying the "defaultRedirect" attribute of the application's <customErrors> configuration tag to point to a custom error page URL.
<!-- Web.Config Configuration File -->
<configuration>
<system.web>
<customErrors mode="RemoteOnly" defaultRedirect="mycustompage.htm"/>
</system.web>
</configuration>
The changes that I did in this last deployment was to Add some columns using the First Code creation approach, as well as the data migration itself.
Again, locally all works OK. But, once it is in Azure it doesn't.
Any clue, helo, approach?
After spending time googling what's happening I found the solution. However, another problem came.
First of all, I put the tag in the web.config in order to see the errors.
Well, the thing here is that for some reason the Data Migration for the Code First was throwing an exception that was not caught. I added the following line of code in the Startup.Auth.cs file
OnException = context => {}
For more infor, visit: Why is [Owin] throwing a null exception on new project?
In that way, you can bypass the error. Now, if you want to know the exact error, then put:
OnException = (context =>{
throw context.Exception;
})
And you can see what was the error. Which in my case is: The model backing the context has changed since the database was created
I followed the solution for this link: The model backing the <Database> context has changed since the database was created
And it solve the problem in some way.
Since I added two new columns to the AspNetUser table, those new columns are not present in the Azure tables saying the the columns doesn't exists. Even I have those columns added locally. Still figure out how to solve this. I guess I will create another post for this.
Hope this help others
Here is the link, where author explains how to a build multilingual website
When I run the code, I get such an error mesage "An ASP.NET setting has been detected that does not apply in Integrated managed pipeline mode."
Then I found such an workaround in web.config file:
<configuration>
.
.
.
<system.webServer>
<validation validateIntegratedModeConfiguration="false" />
</system.webServer>
</configuration>
Now the website works for me, but is shown only in russian, not in english or greek. I am new to ASP.NET, so don't clearly understand source's LanguageModule class, should I somehow modify it?
There are 2 types of pipeline modes in IIS, integrated and classic. The error you are getting is symptomatic of having your web.config arranged in the classic configuration.
Integrated mode provides more flexibility as both IIS and ASP.NET functionality are executed in the same pipeline, instead of 1 after the other.
It might be possible the the project was configured and hosted on a website configured to run under integrated mode. If this is the case, hosting the Website yourself in an application pool which is set to classic mode, may get you going.
Another thing to check is to ensure things like the HttpModule are registered in the correct manner.
How can I validate that my ASPNET AJAX installation is correct.
I have Visual Studio 2008 and had never previously installed any AJAX version.
My UpdatePanel is nto working within IIS6, although it works ok within Visual Studio's web server. The behaviour I get is as if the UpdatePanel doesnt exist at all - i.e. it reverts back to 'normal' ASPX type behavior.
I tried installing AJAX from MSDN followed by an IISRESET yet still it is still not working properly.
What can I check to diagnose the problem?
Update: When running within Visual Studio (Cassini) I get the following 3 requests shown in Fiddler:
http://localhost:1105/RRStatistics/WebResource.axd?d=k5J0oI4tNNc1xbK-2DAgZg2&t=633564733834698722
http://localhost:1105/RRStatistics/ScriptResource.axd?d=N8BdmNpXVve13PiOuRcss0GMKpoTBFsi7UcScm-WmXE9jw5qOijeLDcIyiOsSQZ4k3shu0R2ly5WhH2vI_IbNVcTbxej1dkbdYFXrN6c7Qw1&t=ffffffff867086f6
http://localhost:1105/RRStatistics/ScriptResource.axd?d=N8BdmNpXVve13PiOuRcss0GMKpoTBFsi7UcScm-WmXE9jw5qOijeLDcIyiOsSQZ4AsqNeJVXGSf6sCcCp1QK0jdKTlbRqIN1LFVP8w6R0lJ_vbk-CfopYINgjYsHpWfP0&t=ffffffff867086f6
but when I run within IIS i only get this single request :
http://www.example.com/RRStatistics/ScriptResource.axd?d=f_uL3BYT2usKhP7VtSYNUxxYRLVrX5rhnXUonvvzSEIc1qA5dLOlcdNr9xlkSQcnZKyBHj1nI523o9DjxNr45hRpHF7xxC5WlhImxu9TALw1&t=ffffffff867086f6
Now the second request in Cassini contains a javascript file with 'partial rendering' as one of the first comments. I'm sure this is the source of the problem, but I cannot figure out why in IIS i dont get the other requests.
Check for any JavaScript errors. Sometimes the JavaScript required for the UpdatePanel to work fails to load.
Haven't tried this myself, but I found several forum postings recommending the following
Try and add the following to your
web.config
within
<system.webServer><handlers>
<add verb="GET"
path="ScriptResource.axd"
type="Microsoft.Web.Handlers.ScriptResourceHandler"
validate="false" />
Another option would be to check your web.config. You could for example create an new Ajax enabled ASP.NET website from Visual Studio. This will generate a correct web.config. Copy over all non-ajax sections from your existing web.config and you're set. This worked for me.
-Edoode