We Keep Coding

Why are some unintended symbols added to my string?

I wrote a console application which fetches strings from some fields in a Sharepoint list. Then I simply write the strings to console. This works fine for the most fields. There is one MultiLineTextField with RichText enabled where i had to remove all the html-tags, that causes this issue.
Even after all the tags are removed the strings seem to contain question marks which were never added to the string. The most weird thing about this is when I set a breakpoint and look into the string's value there are no question marks, but they suddenly appear on the console output.
The only thing I could think of was to Trim the string. Because sometimes they appear in front of the actual string sometimes they are at the and of it, but never in between.
So this is what I tried:
myString = myString.Trim();
myString = myString.Replace("?",string.Empty);
But this does not solve the issue. Besides this would not be a smart solution in case one of the strings would be supposed to contain question marks. For detailed code please see the link above.
Also Convert.ToBase64String(Encoding.UTF8.GetBytes(myString)) gives me the following output:
4oCLTWVobCwgRWllciwgV2Fzc2VyLCBIYWNrZmxlaXNjaCA=

There are probably some non-printing unicode (or possibly low ASCII) characters in the end of the string. The console has a different encoding, and will often render such as ?. Basically: use the indexer (yourString[n]) or yourString.ToCharArray() to investigate what is actually in the string aroung the location of the ?.
With the edit, we can see that the string has a zero-width space (decimal 8203) at the start:

Sounds like you're maybe having a problem with unicode characters. Chances are you're outputting the string as ASCII instead of Unicode. Take a look at this question as it sounds like you may be experiencing the same problem.

Escaping directory chars in C#

I need to escape chars in a string I have, which content is C:\\blablabla\blabla\\bla\\SQL.exe to C:\blablabla\blabla\bla\SQL.exe so I could throw a process based on this SQL.exe file.
I tried with Mystring.Replace("\\", #"\"); and Mystring.Replace(#"\\", #"\"); but none worked.
How could I do this?
EDITED: Corrected type in string.

I very strongly suspect that you are looking this input string in the Visual Studio debugger and fooling yourself that there are actually 2 \ whereas in reality there aren't. That's the reason why attempting to replace \\ with \ doesn't do anything because in the original string there is no occurrence of \\. And since you are looking the output once again in the debugger, you are once again fooling yourself that there are 2 \.
Visual Studio debugger has this tendency to escape strings. Log it to a file or print to the console and you will see that there is a single \ in your input string and you don't need to replace anything.

It looks like you're trying to replace double backslash (#"\\") in a string with single backslash (#"\"). If so try the following
Mystring = Mystring.Replace(#"\\", #"\");
Note: Are you sure that the string even contains double backslashes? Certain environments will print out a single backslash as a double (debugger for example). Your comment mentioned my approach didn't work. That's a flag that there's not actually a double backslash in your string (else it would work).

The # character specifies a string as a verbatim literal string, but that is when constructing a string. If you use Mystring.Replace("\\", #"\") then nothing will be replaced, essentially, as the two strings are the same.
If you want a string without the escape characters, then either define it with:
string path = #"C:\Some\Directory\And\File.txt";
Or you can replace the \\ with / like so:
path = path.Replace('\\', '/');
It is worth noting, as mentioned by Darin Dimitrov, that the string containing two \ characters is likely just the display of the string (i.e. when using the debugger) and not the actual value of the string.

i think OP is asking how to escape \\ in File Path, if that in the case, as OP is not mentioning where he's trying to use this. so i'm putting a guess.
Then You use Path.Combine() method to get the FileName path.
Path.Combine() Documentation

where are you looking at this output? because it could be the string is what you expect, but viewing the value through the debugger, output window, etc. is escaping the slash

Use something like:
myStr = myStr.Replace(#"\\", #"\");
Make sure you assign the result of Replace method to myStr. Otherwise it goes into void ;)

Try adding "|DataDirectory|\MyFile.xyz" where you need it. It works with connection strings it might work with something else (I haven't really tried to apply it to something else).

I didn't understand what you want, if you just want do get the file name (escape directory chars) you can try:
string fileName = Path.GetFileName(YourString)

Noloman.... when you concatenate are you perhaps missing a "\" when concatenating the directory.. I am assuming that you are trying to join directory + some sub directory.. #noloman keep in mind that in C# "c:\Temp" is written like this "c:\Temp" or #"c:\Temp" one is Literal the other is how to represent a "\" in the legacy way of coding because the "\" is an escape Char and when dealing with directorys we represent all paths and sub paths with "\"
so perhaps by you replacing the "\" you are truly messing up your own expected process
Mystring = Mystring.Replace(#"\\", #"\");
should work for you unless you are truly meaning to do
Mystring = Mystring.Replace(#"\", "\"); which if you believe that you are expecting a "\" to be used to build the directory.. then of course it will not work.. because you have just in essense replaced the backslash with a return char.. I hope that this makes sense to you..
System.IO.Directory.GetCurrentDirectory(); you are using is also an Issue.. SQL Server is not that application thats running the code.. it's your .NET application so you need to either put the location of the SQL Server into a variable, app.config, web.config ect... please edit your question and paste the code that you are using to do what it is that you want to do inregards to the SQL Server Code.. you would probably want to look at the Are you wanting to do something like Process.Start(....) meaning the file name..?

c# equivalent to stripcslashes function?

I am working with a project that includes getting MMS from a mms-gateway and storing the image on disk.
This includes using a received base64encoded string and storing it as a zip to a web server. This zip is then opened, and the image is retrieved.
We have managed to store it as a zip file, but it is corrupted and cannot be opened.
The documentation from the gateway is pretty sparse, and we have only a php example to rely on. I think we have figured out how to "translate" most of it, except for the PHP function stripcslashes(inputvalue). Can anyone shed shed any light on how to do the same thing in c#?
We are thankful for any help!

stripcslashes() looks for "\x" type elements within longer strings (where 'x' could be any character, or perhaps, more than one). If the 'x' is not recognised as meaningful, it just removes the '\' but if it does recognise it as a valid C-style escape sequence (i.e. "\n" is newline; "\t" is tab, etc.), as I understand it, the recognised character is inserted instead: \t will be replaced by a tab character (0x09, I think) in your string.
I'm not aware of any simple way to get the .net framework to do the same thing without building a similar function yourself. This obviously isn't very hard, but you need to know which escape sequences to process.
If you happen to know (or find out by inspecting your base64 text) that the only thing in your input that will need processing is a particular one or two sequences (say, tab characters), it becomes very easy and the following snippet shows use of String.Replace():
string input = #"Some\thing"; // '#' means string stored without processing '\t'
Console.WriteLine(input);
string output = input.Replace(#"\t", "\t");
Console.WriteLine(output);
Of course, if you really do simply want to remove all the slashes:
string output = input.Replace(#"\", "");

How do I write escape characters verbatim (without escaping) using StreamWriter?

I'm writing a utility that takes in a .resx file and creates a javascript object containing properties for all the name/value pairs in the .resx file. This is all well and good, until one of the values in the .resx is
This dealer accepts electronic orders.
/r/nClick to order {0} from this dealer.
I'm adding the name/value pairs to the js object like this:
streamWriter.Write(string.Format("\n{0} : \"{1}\"", kvp.Key, kvp.Value));
When kvp.Value = "This dealer accepts electronic orders./r/nClick to order {0} from this dealer."
This causes StreamWriter.Write() to actually place a newline in between 'orders.' and 'Click', which naturally screws up my javascript output.
I've tried different things with # and without using string.Format, but I've had no luck. Any suggestions?
Edit: This application is run during build to get some javascript files deployed later, so at no point is it accessible to / run by anyone but the app developers. So while I obviously need a way to escape characters here, XSS as such is not really a concern.

Your problem has already happened by the time you get to this code. String.Format will not "expand" literal \n and \r in the substituted strings ({0} etc) into newline and CR, so it must have happened at some earlier point, possibly while reading the .resx file.
You have two possible solutions. One, as you discovered in the comments to DonaldRay's answer, is to explicitly reverse this replacement, and replace literal newlines with the two characters \n:
kvp.Value.Replace("\r", // <-- replaced by the C# compiler with a literal CR character
"\\r"); // <-- "\\" replaced by the C# compiler with a single "\",
// leaving the two-char string "\r"
You will need to do the same for every character that could appear in your strings. \n and \r are the most common, and then \t (tab); that's probably enough for most dev tools.
string formatted = kvp.Value.Replace("\r", "\\r")
.Replace("\n", "\\n")
.Replace("\t", "\\t");
Alternatively, you could look upstream at the .resx file reading code, and try to find and remove the part that's explicitly expanding these character sequences. This would be a better general solution, if it's possible.

You need to escape the strings, using Microsoft's Anti-XSS Library.

Just escape the backslashes.
kvp.Value = kvp.Value.Replace(#"\", #"\\");
You may need to do this when you are reading from the resx file.

Spaces and backslashes in Visual Studio build events

I have an application that is supposed to aid my project in terms of pre- and post-build event handling. I'm using ndesk.options for command line argument parsing. Which gave me weird results when my project path contains spaces. I thought this was the fault of ndesk.options but I guess my own application is to blame. I call my application as a post-built event like so:
build.exe --in="$(ProjectDir)" --out="c:\out\"
A simple foreach over args[] displays the following:
--in=c:\my project" --out=c:\out"
What happened is that the last " in each parameter was treated as if it was escaped. Thus the trailing backslash was removed. And the whole thing is treated as a single argument.
Now I thought I was being smart by simply escaping the first " as well, like so:
build.exe --in=\"$(ProjectDir)" --out=\"c:\out\"
In that case the resulting args[] look like this:
--path="c:\my
project"
--out="c:\out"
The trailing backslash in the parameters is still swallowed and the first parameter is now split up.
Passing this args[] to ndesk.options will then yield wrong results.
How should the right command line look so that the correct elements end up in the correct args[] slots? Alternatively, how is one supposed to parse command line arguments like these with or without ndesk.options? Any suggestion is welcome.
Thanks in advance

Did you try to escape the last backslash?
build.exe --in="$(ProjectDir)\" --out="c:\out\\"
This works probably only, as long as the ProjectDir ends in \, which should be given.
This is just an idea, but I did not give it a try
EDIT:
I found a comment which suggests to leave out the trailing "

I actually used "." to solve this same problem:
build.exe --in="$(ProjectDir)." --out="c:\out\."
primarily because otherwise it might look like you are trying to escape the second quote...which you're not, you're escaping the final \ (which is hidden).
I also added a REM in the postbuild command describing why I did that.