I am starting to deploy my desktop application. It is a syntax highlighting notepad. I am considering deploying it on the web. What is like a list of things that I should do before I deploy my application?
Before you deploy an application. On the top of my head (some of what we do before each release)
Test it :-)
Test it on a clean PC. What happens it it does not have .NET installed?
Test it as a standard user (not everyone is an administrator)
"Polish". Use a consistent version on all files (important for later upgrades)
Make sure that licenses, copyright messages are correct. That the year is correct etc.
I am no expert in deploy issues, but perhaps you could deploy to a private server, and see if you can actually do the entire process.
And just as a suggestion, —I know its not directly related to the deployment per se— is it a Web 2.0 style (free/user oriented) app? Perhaps a beta version where people expected to not be perfect would help, although that's more after deployment
As this is a desktop application you could use ClickOnce deployment. This bundles your application and all its dependencies into an installer which you upload to the web. Your customers then either download the installer or run it from the web.
ClickOnce also enables automatic updates. You set the update check frequency on deployment, then just upload the new version to the web. The next time the user runs your application and it's time to check, the new version will get downloaded and installed.
Related
When I open a sample Blinky application in Visual Studio, compile and run it, it gets automatically deployed to the target configured WindowsIoT device. After that, on Windows 10 machine where I compile it, the application binaries are located in the bin sub-folder of the project folder as one would expect.
I would like to automate the deployment, so that I could run deployment code
without Visual Studio, specify target device and the binaries location and it would deploy it. I cannot find any API that allows
to deploy apps to Windows IoT, how do I do that?
This shiny Windows IoT stuff is a new area, and there is not a lot of info available apart from the samples and the getting started page. Any pointers are appreciated.
Update: As noted in comments, once one start thinking of mass production, they will probably need to conciser ICD. This, is not, however the problem I'm trying to solve currently. I would like to figure out how I can provide Over-the-Air updates to my UWP application running on Raspberry Pi and Windows IoT. I also would you like to know how I can automate build / deployment in general, but that may be automatically solved if I have a proper OTA solution.
There is a set of instructions on how to do it, which can be found in the same github repo you are linking in your question, but in a different folder. Note, that you need an appx for these instructions to work, and it's not created by the solution build by default.
This page provide (non IoT specific) instructions on using VS to build the appx. And this blog post talks about the command line tool that can be used for making appx.
Note, that the last two links are also talking about publishing an application to app store, so you'll need to make some mental adjustments around that.
I am using visual studio web project to install my web application and do some customization like modifying connection string in web.config file during install time.
Now, My requirement is to create a patch for the web application so that next time the web installer only the changed files.
Is there is any one to do it using visualk studio 2010 ide or any other way.We can't use third party products like Installshield,wix,innosetup etc.
Please suggest.
Visual Studio doesn't support patches for setup projects. It supports only major upgrades.
If you really don't want to use other setup authoring tools, you can try creating the patch manually. You can read more about this here:
http://msdn.microsoft.com/en-us/library/aa370578(VS.85).aspx
But it won't be easy.
If it is just Web project, I would recommend re-deploy instead of patching. Meaning you just deploy new version of site, above the previous one.
Except some really comprehensive case that strategy works all the time. I use simple xcopy deploy for all my projects.
You can write a mini C# app to do it. You can have the list of assembly files in a configuration. On loading of the app, it checks the timestamp difference between server and client files. On finding the change, the mini app pushes the changes file.
Hope, it will resolve your issue
There may be better suited solutins to deply websites than using an installer. For one, there's Web Deploy.
It's main purpose is deploying web applications to IIS and it allows you to modify key configuration values through a simple UI.
Web Deploy works with deployment packages; a big zip containing your application and some meta data to help install it. On deployment it will diff the deployed site with the data in the deployment package to update existing files, add new ones and remove obsolete files.
You can build deployment packages directly from Visual Studio and/or from MSBuild, using your favorite build server.
Web Deploy works really well when you need to deploy often or when you have to delegate deployment to IT staff.
Customizing Web Deployment package is a bit tedious though, you may find a blog post I wrote about this useful.
For simpler situations, I recommend good version control practices and xcopy deployment.
If you tag what you deploy to your server, you can zip up the changed files since last deployment and copy those to your server.
I need to create a simple installer of sorts for a different application. That other application already has it's own simplistic installer, and I don't want to meddle with it.
The reason for my own installer is to allow the user to install SQL Express if (s)he so chooses, and also to pre-install any other basic requirements for such a procedure.
At the moment, here's where I'm at:
I've created a single Windows form application, with big buttons (this is for a user which likely won't be very good with computers) to install SQL Server Express (using silent install with a predefined set of arguments) or the actual application, along with some helpful text to let the user know what's going on. Something along the lines of Visual Studio autorun window.
I've also added the standard set of pre-requirements to the application (.NET, Windows Installer).
Everything works OK if I run the app by using the executable. HOWEVER, if I publish it to create a ClickOnce application (so the pre-requisites are installed when needed) and run it, it stops running other installers.
EDIT: Apparently the problem with not being able to run other application from a ClickOnce application is only on my end, and probably deserves a new question, not necessarily here on StackOverflow (perhaps on MSDN forums?).
In your program before launching the installer you can check if .NET is installed. Its pretty easy to check if a particular s/w or a version of s/w is installed. Write a program that will check HKEY/LocalMachine/Microsoft/Windows/CurrentVersion/Uninstall and in that there will be list of programs that have been installed on that machine. If you find then go ahead with your install else suggest user that he needs to install pre req.
When you create a setup project you can right click on the setup project, go to properties, and click on pre requisites. In that you can mention which version of .NET framework is needed and then give the location of the framework. In this link look for Huggy Bears response eggheadcafe.com/community/aspnet/2/10131905/setup-project.aspx
I've settled for a "Click Once" application. It can install all required .NET components needed for it to run, thus becoming an "sure-to-run-non-native-C++-code-splash-screen".
Granted, there ARE issues with Click Once, but this is far better than nothing. It's also better than running C++ or unmanaged code applications. ;)
VS 2008 SP1
I have created a application that I have installed on the user computer. However, I want the application to be self-updating. But I am not sure if this would really update the application.
The application will download all the files from the web server, and replace the files in the directory where the program as been installed to. The user will restart the application.
I am just want to be sure, because I can't replace the installed files with the updated ones. As the application will be running. So really the application cannot delete/replace itself.
So, I was thinking that I could download into another directory, if the program is installed in this directory 'program files/application/1.0.0' then I could download the files to 'program files/application/1.0.1'.
However, when the program restarts, how can it know that it has to execute from the 1.0.1 directory?
I can't use clickonce or the updater block for this.
Many thanks for any advice,
A good option is to make an independant Updater application.
The updater will download the newest version and kill/replace the old.
I think this is the best option, because you can execute the updater within the main appication (so you can say that it´s self-updating), or directly by the user with a shortcut.
The updater can check if the application is running and ask the user to exit the application or kill it by itself.
Forgive my english...
Good luck
All of that is already done for you if you use ClickOnce deployment (Project properties, Publish).
You can wrap the application with a small loader program which will do a version check. If it's out of date, download the newer binaries and overwrite the old ones. If you want to maintain all version you might end up with:
c:\program files\mycompany\myapp\loader (the newer version will point to the latest directory)
c:\program files\mycompany\myapp\v1.0
c:\program files\mycompany\myapp\v1.1
If it's on a LAN, you might be able afford the bandwidth of just re-downloading the binaries on start up instead.
Use Windows Installer for the installation and updating. If you sign your installation packages the user can update your application without needing any administrator privileges.
I've made a website and an application that demonstrates the functionality of what you want on my website.
Wix Clickthrough might meet your needs: http://wix.sourceforge.net/clickthrough.html
I would look into ClickOnce. It can be configured multiple ways, to check for updates before the application runs, to download from the server each time it's run, or check for updates after the application has started.
I have done ClickOnce Deployment and an independent updating application, they both work well. You obviously will have more flexibility over an updating application that you create yourself, however tho, ClickOnce can also be configured to install prerequisites such as the .NET Framework, Windows Installer, etc... for your application to run.
I have developed a web application also that has been deployed in many client area.
I have created a installer to install this application at client area for first time.
If i done any bug fix or add any new functionality to this site, should i create new installer for site? or How to update the existing site without creating new installer with latest bug fix?
Or, Is there any other option to update existing application?
Or, we can create a installer only install the latest updates?
Please guide me
You can start your journey using the built in web installer (part of Visual Studio).
Important thing is it will only install to a Virtual Directory of an existing web site.
If virtual directories are fine, you then need to worry about bug fixing and updates.
here is a solution...
If you are at the client or have easy access to the web sites via FTP.
You can map drives on your development / test environment to the production FTP sites, then just create a batch to copy stuff over.... best part is - if you're hosting on IIS, if you make any changes to the web.config or any assembly in \Bin you'll trigger an IIS Reset, so this means you shouldn't need to have remote access to their servers.
Make sure that batch updates all web applications in the farm.
You can also fully rely on the application installer - IF YOU'VE FULLY TESTED THAT IT DOES INFACT UPDATE YOUR FILES, LIKE IT SAYS IT SHOULD. Don't just assume it will, test that installer, and retest it... because I have had lots of problems with upgrading a web site, and you can't expect your client to uninstall, reinstall every time.
I wouldn't worry about creating a "patch installer" Web apps are relatively small anyways - and copying unchanged files won't make a huge differance.
Just be sure when you create the installer, you add project outputs to the installer file... and work with project outputs, rather than having to copy stuff in manually to the installer every time you make a change.
Hope this is at least a good starting point.