I have the following problem.
I made an application in C# (using Visual Studio 2010). Everything worked fine.
Then I had to make some changes in a "main.cs". Did those... all fine again.
Then I had to make other changes in same file. Did those... cleaned the solution built it. The problem is that when I run/debug/anything the application I get the same result as I did before I made the changes. I even tried to break the code (called a random function that didn't exist, used wrong syntax), but the result was the same "Build successful" and the old version.
Is there some kind of cacheing mechanism or something? How do I get rid of this problem?
I added prints for the "compile" solution... I can't find the build property.
Try deleting the bin and obj directories in the Visual Studio project directory. The obj directory contains the temporary files used to create the binary while the bin directory contains the binaries for that project. In addition, check if there are any warnings being shown when you build your solution.
I was able to reproduce the same error i.e. build successfully even though the file has not been compiled. The Build Action of the file had not been set to Compile.
The correct Build Action for a code file (main.cs) would be Compile.
According the updated question the file properties does not have the compile option
The reason for this is that the file (main.cs) has not been included in the project, but the "Show all files" button is "on" in the Solution Explorer. The file has not been included in the project (hence not compiled) and the file icon is greyed out in Solution Explorer.
To include this file in the project, right click on add existing item to the project (see following image). In the subsequent dialog select the file (main.cs) and click on the add button.
This should solve your problem.
In future, it is best to keep the "Show All Files" button as "off" to avoid confusion.
Is it possible you have selected the build and run last successful version? Check out my answer to something similar here. If the changes you made broke something and you had checked the boxes and hit yes to the dialog boxes in my answer below then that's most likely the issue.
Cannot see changes I make when I run my application in Visual Studio
Make a backup of your solution.
Delete the .cs files from within the solution explorer. If your program compiles and runs, than you are linked to source folders and not actually using the one in your solution.
I doubt this is it, but worth a try. The other things that came to mind you have already eliminated out with the previous answers.
This is happening to me very often. When I am working in Visual Studio 2010 and say I make a code change, then build... Both my existing breakpoints become disabled / and or cannot be set and I also cannot set new breakpoints. Does anyone have a solution for this? It is very annoying. So far the only way I have been able to get around this is to restart Visual Studio which can take 5 to 8 minutes to reindex everything or to try rebuilding individual projects in my solution. My solution consists of several DLLs which make up the entire program.
Check that you have the dependencies set correctly in your projects. I know my breakpoints will become disabled if the code is "out of date". If you don't have the dependencies set up right, then when the updated code is rebuilt it will not rebuild all of the related code which will then leave those modules "out of date".
Since this is VS 2010, the dependencies are on the project not on the solution (you can add solution dependencies, but project dependencies will carry over into a new solution so it is the better way to go when possible).
This issue is caused when you having your Configuration Manager settings set to Release rather than Debug.
In Visual Studios select Build from the menu, then Configuration Manager.
In the next dialog select your project, then locate the drop down menu near the top left corner titled "Active solution configuration:" Make sure it is set to Debug.
That should fix the problem.
As it turns out the post.build file contained numerous conditions for whether or not it should copy several DLLs to a target directory... Since I didn't have time to pick through the xml for these actions I just used a bash script to copy the files after building. No need to get complicated... Otherwise, the formal solution involves setting conditions for allowing the DLLs to be overwritten/copied after compile or not.
I find the Visual Studio post.build file concept a little excessive since in the end it will make little difference whether a dll is overwritten with a freshly compiled version, yet, if you make code changes, compile, and it doesn't copy to the target directory you end up running your app with an out of date DLL and you are not testing with the recent code change..! Others have even implemented the post.build file complete with xml and goto statements...! Leave it to Microsoft to complicate the build & debug process...
Alternatively, if your code is under version control start afresh by checking out the head revision, do another clean and rebuild and start debugging again.
This for whatever reason enabled me to insert breakpoints in my VS 2010 C# project once again, whereas no amount of fannying around with properties, configurations etc got rid of my phantom breakpoint problem.
The best solution I found for this was to quit my Windows job and get another job as a Mac Developer where we use Xcode.! What a huge difference.! I sure haven't seen that breakpoints problem again.!
A C# desktop application (on the Visual Studio Express edition) worked, but then it didn't work 5 seconds later.
I tried the following:
Ensure debug configuration, debug flag, and full debug information are set on all assemblies.
Delete all bin and obj folders and all DLL files related to the project from my entire machine.
Recreate projects causing the problem from scratch.
Reboot.
I have two Windows Forms projects in the solution. One of them loads the debug information, one doesn't. They both refer to the assembly I'm trying to get debug information on in exactly the same way in the project file. Any ideas?
I want to add here, mostly for myself when I come back to review this question, that symbols are not loaded until the assembly is loaded, and the assembly is not loaded until it is needed. If the breakpoint is in a library that is only used in one function in your main assembly, the symbols will not be loaded (and it will show the breakpoint as not being hit) until that function is called.
Start debugging, as soon as you've arrived at a breakpoint or used Debug > Break All, use Debug > Windows > Modules. You'll see a list of all the assemblies that are loaded into the process. Locate the one you want to get debug info for. Right-click it and select Symbol Load Information. You'll get a dialog that lists all the directories where it looked for the .pdb file for the assembly. Verify that list against the actual .pdb location. Make sure it doesn't find an old one.
In normal projects, the assembly and its .pdb file should always have been copied by the IDE into the same folder as your .exe, i.e. the bin\Debug folder of your project. Make sure you remove one from the GAC if you've been playing with it.
Check to make sure that you are not in release but in Debug.
When in debug:
First try rebuilding your project by right mouse click the project > Rebuild
If that doesn't work, try a clean of the project (right mouse click on the project > clean)
If that didn't work check this:
Right mouse click your project
Select [Properties]
Select the [Build] tab
Make sure [Define DEBUG constant] and [Define TRACE constant] are checked
Make sure [Optimize Code] is unchecked
Click the [Advanced] button at the bottom of the Build tabpage
Make sure that [Debug Info:] is set to [full]
Click [OK] and rebuild the project ;-)
(step 7 generates the .pdb files, these are the debugging symbols)
Uncheck the "Enable Just My Code" option in the
Tools/Options/Debugging/General
Just something simple to try - you may have tried it already.
Right click the Solution in solution explorer, click "clean solution", this deletes all the compiled and temporary files associated with a solution.
Do a rebuild of the solution and try to debug again.
I've also had troubles with breakpoints multiple projects in a solution - some compiled as x86, some as x64.
The selected answer led me to fix my problem. But I need to do a few things more:
Even with "Debug" selected in the dropdown:
And in the project Properties > Build:
The Visual Studio was not loading symbols to a specific project. So in that dropdown I select "Configuration Manager" and saw that the settings to my web project was incorrect:
Then I set that to "Debug" and it started to generate the .pdb file.
BUT I need to manually copy the PDB and DLL and put in the folder that VS was looking (here is where the selected answer helped me):
Sometimes, even though it gives you this error, the Breakpoint still gets hit, so just ignore the error.
This happens fairly often in the Views of an MVC web app, i.e. .cshtml.
I was able to fix the error by simply setting the option in the 'Attach to Process' to 'Automatically determine the type of code to debug' option as shown in the attached screenshot.
Simply follow the steps below:
Go to Debug from the menu bar
Click on Attach to Process
Near the Attach to option, click on the Select button
The Select Code Type window will appear
Now select the option Automatically determine the type of code to debug and click the OK button.
Debug > Windows > Modules to see what modules were being loaded put me in the right direction.
In my case IIS Express seemed to be loading a different DLL from the temporary ASP.NET files.
The solution?
Browse to C:\Users\<YOUR USER>\AppData\Local\Temp\Temporary ASP.NET Files\vs
Delete everything in this directory!
Check if your .pbd file is missing in your bin/Debug folder. If it is then go to "Properties" of your project, selected "Build" and then "Advanced" at the bottom. Choose "full" under "Debug info" in the new window that appeared. This was my issue and solved it for me.
In my case "Optimize Code" was checked in my project properties. This caused VS to see my assembly as "not my code", and in turn, it did not load symbols for it.
The solution was to uncheck this.
Try running visual studio as an administrator within windows.
You need to enable "Generate debug info" in compiler settings
I tried everything mentioned above, but nothing worked.
[Clean solution, and check for PDB files etc.]
Even publishing the same solution did not resolve the issue.
Then I went to back to what I usually do to resolve (fool this stubborn Visual Studio)
All I did was to make a deliberate change in code and publish the solution.
Then I reverted the change and published again.
Voila [PDB files rid of evil spirits].. Not a smart resolution, but this did work.. :-|
We found the cause of our problem. This code was using the "CodeBehind" attribute in the Page directive of the .aspx file instead of the "CodeFile" attribute (ASP.NET 2.0 and beyond). After days of desperation, a simple search and replace solved the problem.
Option "Start debugging, Debug + Windows + Modules" does not exist in Microsoft Visual Studio Express 2013 edition.
Unchecking "Use Managed Compatibility Mode" in Tools Options Debugging fixes this.
Webapplications (IIS Express) only:
Rightclick IIS Express Tray and close the IIS.
Clean Solution
Clean solution and Rebuild
Check the configuration is set to Debug
Make sure that the PDB file is in the Debug folder it self
From Debug menu click Enable All Break points
Make sure you're in Debug and not is release by choosing debug in the dropdown menu like you can see in the picture below.
Then, try cleaning your project by clicking the right button in your mouse on the solution in the solution explorer window and choosing Clean solution.
Then rebuild your solution by clicking the right button in your mouse on the solution in the solution explorer window and choose Rebuild solution
Check are the following two setting the same in Visual Studio:
Right click test project, go to Properties, Build tab, and look at Platform target
Mine are all set to "Any CPU" so x64
On the Main Menu bar, go to Test, Test Settings, Default Processor Architecture
Mine was set to X86
Changing this to X64 to match above setting made the built in Visual Studio menu “Debug Test(s)” work and hit breakpoints that were previously ignored with the message “The breakpoint will not currently be hit. No symbols have been loaded for this document”.
Update:
For Visual Studio 2019 the menus have been moved around a bit:
I also had the same issue what I rebuild the whole solution (including refereced projects) in x86( or x64)
Even though I set all of my projects to x86 from Configuration Manager (Build->ConfigManager) some of my projects were not set to x86.
So Just to make sure right click on the project and follow
project -> properties -> Debug Tab, verify Configuration and Platform.
The .dll where I want to stop debugger and the associated .pdb files where copied near the .exe file. Those files had an older date so I thought they weren't updated in the runtime. I manually deleted them, Visual Studio create another pair AND put this new pair near the .exe. Now the breakpoint works!
Maybe Visual Studio cannot copy and REPLACE existing files (.dll and .pdb) near the .exe since there are another there. So if I deleted manually then VS could create new one near .exe.
I think that the root cause of the problem is that the Visual Studio use another file in runtime, no the file from the project, with the stop.
Instead of doing all these things just Close and reopen
Project Properties (then select your build config) > Build Tab > Advanced... > Debug Info (dropdown)
Set to 'all' or 'pdb-only' then rebuild
This took me a while tried other options above and for some strange reason debugging stopped working.
Tool -> Options -> Debugging -> General -> (untick) "Require source files to exactly match the original version" option
I was integrating a C# application with a static library using VS10 - which I'm new to. I wrote a managed code dll to interface them. I could set breakpoints everywhere but the static lib. I got the message described above - no symbols have been loaded for this document. I tried many of the suggestions above. I could see that the symbols weren't being loaded. I finally noticed a check box Configuration Debug, Enable unmanaged code debugging. That allowed me to set breakpoints in the static lib functions.
In my case, I was compiling a class library (DLL). No modules seem to be loaded in Debug -> Modules, so I couldn't even load the symbols manually.
My solution was to add this line to my code:
System.Diagnostics.Debugger.Launch();
Once this code is reached, an exception is triggered and .NET Framework shows a dialog box asking which Visual Studio (i.e. new instance of VS 2008, new instance of VS 2013, etc) you want to use to debug the program. You can choose the existing instance of VS with your project loaded. This will attach the process to your VS session and load all symbols, and now you can debug your project.
Of course, the compilation has to be done using the Debug configuration, not Release.
For an ASP.Net application, check the properties of the site, ASP.NET tab. Ensure that the correct ASP.NET version is selected.
I think the source if this error is, the debug symbols have a hard time surfacing to the solution after building for release.
I tried all the other answers -- generally, regenerating .pdb symbols or checking their location, cleaning and rebuilding project, ensuring active configuration is not Release etc.
What eventually worked for me is right-clicking on the project in solution explorer > Debug > Start new instance.
After trying a bunch of these, the thing that ultimately worked for me was this:
In Debug > Options > General, uncheck Enable Edit and Continue.
this happened to me after copy paste another webservice asmx file into an existing webservice, resulting in the same error when trying to debug the recently added service, to be able to debug I had to start without debug, then attach to the process. its weird but its the only way i found to be able to debug.
in my solution:
i have a class library project that compiles into a dll.
i have a web project.
(i have multiple solutions with different web projects but the same class library)
one of the files in the class project (utilities.cs) - all of a sudden won't compile into the .dll
i had made a change to this file, but the change wouldn't show on the website. so i put a breakpoint in the .cs file, and tried running it... breakpoint didn't get hit! eventually i put a breakpoint in the .aspx file that called the function. then i stepped the debugger one line on, so it would step into the .cs file, except i got the error:
"This source file has changed. It no longer matches the version of the file used to build the application being debugged."
so the code in utilities.cs is not being updated into the dll. which is weird, because code in my other .cs files IS being updated (i tried changing a few lines) and IS able to catch the debug.
any ideas how to fix this? or even what the cause of the problem is??
Try:
Right click on Solution in Solution Explorer -> Properties -> Configuration Properties -> Make sure Build checkbox is checked for your class library.
You need to find out why the DLL will not build:
Look at the output window for any errors
Check the Errors window
Fix the errors and try building again.
The dll that you are trying to debug is from an older version of your code that did compile OK and the debugger pickes that up and is trying to debug against that - it is complaining because the code and the dll no longer match.
Try doing a Build -> Clean on the solution and then rebuilding to see the errors.
When You adding new references to Web project You must choose "Projects" tab:
Projects lists all reusable components created from local projects.
Add or Remove References in Visual
Studio
Add a Reference to a Visual Studio
Project in a Web Site
Always rebuild all projects in Release and Debug mode.
I did exactly what #nightcoder said but a simple change was required. Go to Configuration Properties(Right click on Solution in Solution Explorer -> Properties -> Configuration Properties) and select "All Configurations" in Configuration option.
This created the .dll for me
This happened to me after switching between branches in a project which have significant differences between them, I tried every solution from the web but non worked.
Finally, I had to delete my local project files and clone the project from the GitHub repo again, after that when I started the project, the project build worked without errors, and dll was generated.