I am new to regex (15 minutes of experience) so I can't figure this one out. I just want something that will match an alphanumeric string with no spaces in it. For example:
"ThisIsMyName" should match, but
"This Is My Name" should not match.
^[a-zA-Z0-9]+$ will match any letters and any numbers with no spaces (or any punctuation) in the string. It will also require at least one alphanumeric character. This uses a character class for the matching. Breakdown:
^ #Match the beginning of the string
[ #Start of a character class
a-z #The range of lowercase letters
A-Z #The range of uppercase letters
0-9 #The digits 0-9
] #End of the character class
+ #Repeat the previous one or more times
$ #End of string
Further, if you want to "capture" the match so that it can be referenced later, you can surround the regex in parens (a capture group), like so:
^([a-zA-Z0-9]+)$
Even further: since you tagged this with C#, MSDN has a little howto for using regular expressions in .NET. It can be found here. You can also note the fact that if you run the regex with the RegexOptions.IgnoreCase flag then you can simplify it to:
^([a-z0-9])+$
this will match any sequence of non-space characters:
\S+
Take a look at this link for a good basic Regex information source: http://regexlib.com/CheatSheet.aspx
They also have a handy testing tool that I use quite a bit: http://regexlib.com/RETester.aspx
That said, #eldarerathis' or #Nicolas Bottarini's answers should work for you.
I have just written a blog entry about regex, maybe it's something you may find useful:)
http://blogs.appframe.com/erikv/2010-09-23-Regular-Expression
Try using this regex to see if it works: (\w+)
Related
I already gone through many post on SO. I didn't find what I needed for my specific scenario.
I need a regex for alpha numeric string.
where following conditions should be matched
Valid string:
ameya123 (alphabets and numbers)
ameya (only alphabets)
AMeya12(Capital and normal alphabets and numbers)
Ameya_123 (alphabets and underscore and numbers)
Ameya_ 123 (alphabets underscore and white speces)
Invalid string:
123 (only numbers)
_ (only underscore)
(only space) (only white spaces)
any special charecter other than underscore
what i tried till now:
(?=.*[a-zA-Z])(?=.*[0-9]*[\s]*[_]*)
the above regex is working in Regex online editor however not working in data annotation in c#
please suggest.
Based on your requirements and not your attempt, what you are in need of is this:
^(?!(?:\d+|_+| +)$)[\w ]+$
The negative lookahead looks for undesired matches to fail the whole process. Those are strings containing digits only, underscores only or spaces only. If they never happen we want to have a match for ^[\w ]+$ which is nearly the same as ^[a-zA-Z0-9_ ]+$.
See live demo here
Explanation:
^ Start of line / string
(?! Start of negative lookahead
(?: Start of non-capturing group
\d+ Match digits
| Or
_+ Match underscores
| Or
[ ]+ Match spaces
)$ End of non-capturing group immediately followed by end of line / string (none of previous matches should be found)
) End of negative lookahead
[\w ]+$ Match a character inside the character set up to end of input string
Note: \w is a shorthand for [a-zA-Z0-9_] unless u modifier is set.
One problem with your regex is that in annotations, the regex must match and consume the entire string input, while your pattern only contains lookarounds that do not consume any text.
You may use
^(?!\d+$)(?![_\s]+$)[A-Za-z0-9\s_]+$
See the regex demo. Note that \w (when used for a server-side validation, and thus parsed with the .NET regex engine) will also allow any Unicode letters, digits and some more stuff when validating on the server side, so I'd rather stick to [A-Za-z0-9_] to be consistent with both server- and client-side validation.
Details
^ - start of string (not necessary here, but good to have when debugging)
(?!\d+$) - a negative lookahead that fails the match if the whole string consists of digits
(?![_\s]+$) - a negative lookahead that fails the match if the whole string consists of underscores and/or whitespaces. NOTE: if you plan to only disallow ____ or " " like inputs, you need to split this lookahead into (?!_+$) and (?!\s+$))
[A-Za-z0-9\s_]+ - 1+ ASCII letters, digits, _ and whitespace chars
$ - end of string (not necessary here, but still good to have).
If I understand your requirements correctly, you need to match one or more letters (uppercase or lowercase), and possibly zero or more of digits, whitespace, or underscore. This implies the following pattern:
^[A-Za-z0-9\s_]*[A-Za-z][A-Za-z0-9\s_]*$
Demo
In the demo, I have replaced \s with \t \r, because \s was matching across all lines.
Unlike the answers given by #revo and #wiktor, I don't have a fancy looking explanation to the regex. I am beautiful even without my makeup on. Honestly, if you don't understand the pattern I gave, you might want to review a good regex tutorial.
This simple RegEx should do it:
[a-zA-Z]+[0-9_ ]*
One or more Alphabet, followed by zero or more numbers, underscore and Space.
This one should be good:
[\w\s_]*[a-zA-Z]+[\w\s_]*
I'm looking for a regular expression to extract a string from a file name
eg if filename format is "anythingatallanylength_123_TESTNAME.docx", I'm interested in extracting "TESTNAME" ... probably fixed length of 8. (btw, 123 can be any three digit number)
I think I can use regex match ...
".*_[0-9][0-9][0-9]_[A-Z][A-Z][A-Z][A-Z][A-Z][A-Z][A-Z][A-Z].docx$"
However this matches the whole thing. How can I just get "TESTNAME"?
Thanks
Use parenthesis to match a specific piece of the whole regex.
You can also use the curly braces to specify counts of matching characters, and \d for [0-9].
In C#:
var myRegex = new Regex(#"*._\d{3}_([A-Za-z]{8})\.docx$");
Now "TESTNAME" or whatever your 8 letter piece is will be found in the captures collection of your regex after using it.
Also note, there will be a performance overhead for look-ahead and look-behind, as presented in some other solutions.
You can use a look-behind and a look-ahead to check parts without matching them:
(?<=_[0-9]{3}_)[A-Z]{8}(?=\.docx$)
Note that this is case-sensitive, you may want to use other character classes and/or quantifiers to fit your exact pattern.
In your file name format "anythingatallanylength_123_TESTNAME.docx", the pattern you are trying to match is a string before .docx and the underscore _. Keeping the thing in mind that any _ before doesn't get matched I came up with following solution.
Regex: (?<=_)[A-Za-z]*(?=\.docx$)
Flags used:
g global search
m multi-line search.
Explanation:
(?<=_) checks if there is an underscore before the file name.
(?=\.docx$) checks for extension at the end.
[A-Za-z]* checks the required match.
Regex101 Demo
Thanks to #Lucero #noob #JamesFaix I came up with ...
#"(?<=.*[0-9]{3})[A-Z]{8}(?=.docx$)"
So a look behind (in brackets, starting with ?<=) for anything (ie zero or more any char (denoted by "." ) followed by an underscore, followed by thee numerics, followed by underscore. Thats the end of the look behind. Now to match what I need (eight letters). Finally, the look ahead (in brackets, starting with ?=), which is the .docx
Nice work, fellas. Thunderbirds are go.
I am having issue with a reg ex expression and can't find the answer to my question.
I am trying to build a reg ex pattern that will pull in any matches that have # around them. for example #match# or #mt# would both come back.
This works fine for that. #.*?#
However I don't want matches on ## to show up. Basically if there is nothing between the pound signs don't match.
Hope this makes sense.
Thanks.
Please use + to match 1 or more symbols:
#+.+#+
UPDATE:
If you want to only match substrings that are enclosed with single hash symbols, use:
(?<!#)#(?!#)[^#]+#(?!#)
See regex demo
Explanation:
(?<!#)#(?!#) - a # symbol that is not preceded with a # (due to the negative lookbehind (?<!#)) and not followed by a # (due to the negative lookahead (?!#))
[^#]+ - one or more symbols other than # (due to the negated character class [^#])
#(?!#) - a # symbol not followed with another # symbol.
Instead of using * to match between zero and unlimited characters, replace it with +, which will only match if there is at least one character between the #'s. The edited regex should look like this: #.+?#. Hope this helps!
Edit
Sorry for the incorrect regex, I had not expected multiple hash signs. This should work for your sentence: #+.+?#+
Edit 2
I am pretty sure I got it. Try this: (?<!#)#[^#].*?#. It might not work as expected with triple hashes though.
Try:
[^#]?#.+#[^#]?
The [^ character_group] construction matches any single character not included in the character group. Using the ? after it will let you match at the beginning/end of a string (since it matches the preceeding character zero or more times. Check out the documentation here
Hi guys I need a regex that only extracts punctuations/characters.
I have this so far :
[._^%$#!~#,-]+
but this works if there is at least 1 punctuations and still allows for any other char (digit or letter)
I need to to only allow punctuations/characters
Try this:
^[\p{S}\p{P}]+$
\p{S} matches any symbol character, and \p{P} matches any punctuation.
Note that your pattern will not match all the symbols and punctuations not present in the list.
Try anchoring the regex to the start and the end of the string (unless you're using Multiline matching) - i.e. ^ at the beginning and $ at the end:
^[._^%$#!~#,-]+$
Note - this does not endorse your actual pattern (I can't say whether this is matching all the 'special characters' you're talking about, but it will make it so that the entire string must be all 'special'.
[^a-zA-Z0-9]* u can try something like this. Should NOT accept those chars, cba to writte all beside chars beside one u typed.
\W
Matches any character that is not a word character (alphanumeric & underscore).
I know this stuff has been talked about a lot, but I'm having a problem trying to match the following...
Example input: "test test 310-315"
I need a regex expression that recognizes a number followed by a dash, and returns 310. How do I include the dash in the regex expression though. So the final match result would be: "310".
Thanks a lot - kcross
EDIT: Also, how would I do the same thing but with the dash preceding, but also take into account that the number following the dash could be a negative number... didnt think of this one when I wrote the question immediately. for example: "test test 310--315" returns -315 and "test 310-315" returns 315.
Regex regex = new Regex(#"\d+(?=\-)");
\d+ - Looks for one or more digits
(?=\-) - Makes sure it is followed by a dash
The # just eliminates the need to escape the backslashes to keep the compiler happy.
Also, you may want this instead:
\d+(?=\-\d+)
This will check for a one or more numbers, followed by a dash, followed by one or more numbers, but only match the first set.
In response to your comment, here's a regex that will check for a number following a -, while accounting for potential negative (-) numbers:
Regex regex = new Regex(#"(?<=\-)\-?\d+");
(?<=\-) - Negative lookbehind which will check and make sure there is a preceding -
\-? - Checks for either zero or one dashes
\d+ - One or more digits
(?'number'\d+)- will work ( no need to escape ). In this example the group containing the single number is the named group 'number'.
if you want to match both groups with optional sign try:
#"(?'first'-?\d+)-(?'second'-?\d+)"
See it working here.
Just to describe, nothing complicated, just using -? to match an optional - and \d+ to match one or more digit. a literal - match itself.
here's some documentation that I use:
http://www.mikesdotnetting.com/Article/46/CSharp-Regular-Expressions-Cheat-Sheet
in the comments section of that page, it suggests escaping the dash with '\-'
make sure you escape your escape character \
You would escape the special meaning of - in regex language (means range) using a backslash (\). Since backslash has a special meaning in C# literals to escape quotes or be part of some characters, you need to escape that with another backslash(\). So essentially it would be \d+\\-.
\b\d*(?=\-) you will want to look ahead for the dash
\b = is start at a word boundry
\d = match any decimal digit
* = match the previous as many times as needed
(?=\-) = look ahead for the dash
Edited for Formatting issue with the slash not showing after posting