I'm currently working with an XML request, and am trying to create a Reply Document that has multiple child nodes of the same name in the call, so what I'm trying to return is:
<Reply Document>
<ConfirmationItem name = "One">
<ItemDetail />
</ConfirmationItem>
<ConfirmationItem name = "Two">
<ItemDetail />
</ConfirmationItem>
...
<ConfirmationItem name = "Twenty">
<ItemDetail />
</ConfirmationItem>
</Reply Document>
I did a bit of research and found this thread: XmlReader AppendChild is not appending same child value in which the accepted answer was that the OP had to create new Elements to be able to append to the end instead of overwrite the first.
My original code is below, it creates the XmlNode from the incoming Request and appends the result to the XmlDocument itself:
//p_transdoc is the XmlDocument that holds all the items to process.
XmlNodeList nodelst_cnfrm = p_transdoc.SelectNodes("//OrderRequest");
foreach (XmlNode node in nodelst_cnfrm)
{
//this is just an XML Object
XmlNode node_cnfrm_itm = this.CreateElement("ConfirmationItem");
node_cnfrm_itm.Attributes.Append(this.CreateAttribute("name")).InnerText = p_transdoc.Attributes["name"].InnerText;
XmlNode node_itmdtl = this.CreateElement("ItemDetail");
node_cnfrm_itm.AppendChild(node_itmdtl);
//xml_doc is the return XML request
xml_doc.AppendChild(node_cnfrm_itm);
}
So after reading that thread and the answer, I tried to change the code to use a new XmlElement each pass through.
//p_transdoc is the XmlDocument that holds all the items to process.
XmlNodeList nodelst_cnfrm = p_transdoc.SelectNodes("//OrderRequest");
foreach (XmlNode node in nodelst_cnfrm)
{
XmlElement node_cnfrm_itm = new XmlElement();
node_cnfrm_itm = this.CreateElement("ConfirmationItem");
node_cnfrm_itm.Attributes.Append(this.CreateAttribute("name")).InnerText = p_transdoc.Attributes["name"].InnerText;
XmlElement node_itmdtl = new XmlElement();
node_itmdtl = this.CreateElement("ItemDetail");
node_cnfrm_itm.AppendChild(node_itmdtl);
//xml_doc is the return XML request
xml_doc.AppendChild(node_cnfrm_itm);
}
But not only does that not work, it returns a server error. So I've come to you for help. Right now this code is just returning one ConfirmationItem. How would I be able to append the ConfirmationItem to the end of the Document instead of overwrite it, to be able to return as many as were sent in?
(I should point out that this code has been heavily formatted for ease of readability, simplicity, and to reduce clutter. Any typographical errors are purely because of the Asker's internal failure at effective proofreading).
Assuming xml_doc is the xml with the ConfirmationItems you need to create the XmlElements with the new XmlDocument. XmlDocument.CreateElement. Hence I use the Linq extension method OfType<>() here to only return the XmlNode objects of the type XmlElement.
// dummy data
XmlDocument p_transdoc = new XmlDocument();
p_transdoc.LoadXml(#"
<root name='rootAttribute'>
<OrderRequest name='one' />
<OrderRequest name='two' />
<OrderRequest name='three' />
</root>
");
XmlDocument xml_doc = new XmlDocument();
xml_doc.LoadXml("<ReplyDocument />");
foreach (var node in p_transdoc.SelectNodes("//OrderRequest").OfType<XmlElement>())
{
XmlElement node_cnfrm_itm = xml_doc.CreateElement("ConfirmationItem");
node_cnfrm_itm = xml_doc.DocumentElement.AppendChild(node_cnfrm_itm) as XmlElement;
node_cnfrm_itm.SetAttribute("name", node.GetAttribute("name"));
XmlElement node_itmdtl = xml_doc.CreateElement("ItemDetail");
node_itmdtl = node_cnfrm_itm.AppendChild(node_itmdtl) as XmlElement;
}
The method CreateElement returns an XmlElement so you can use the methods SetAttribute and GetAttribute.
The code: p_transdoc.Attributes["name"].InnerText doesn't seem right. If you want to get the attributes for the root element of the document you need to type: p_transdoc.DocumentElement.GetAttribute("name")
IMO this is MUCH easier if you're using Linq to XML.
In Linq to XML this would be similar to (some variables have different names):
// dummy data
var transDoc = XDocument.Parse(#"
<root name='rootAttribute'>
<OrderRequest name='one' />
<OrderRequest name='two' />
<OrderRequest name='three' />
</root>");
var xmlDoc = XDocument.Parse("<ReplyDocument />");
xmlDoc.Root.Add(
transDoc.Root.Elements("OrderRequest").Select(o =>
new XElement("ConfirmationElement",
new XAttribute("name", (string)o.Attribute("name")),
new XElement("ItemDetail"))));
Both examples output:
<ReplyDocument>
<ConfirmationElement name="one">
<ItemDetail />
</ConfirmationElement>
<ConfirmationElement name="two">
<ItemDetail />
</ConfirmationElement>
<ConfirmationElement name="three">
<ItemDetail />
</ConfirmationElement>
</ReplyDocument>
Related
I'm new to xml so I'm not sure if I worded the question correctly, but I will do my best to explain.
Basically, I'm trying to parse an xml response in C# such as the one below:
<Premium>
<TotalPremiumAmount>87</TotalPremiumAmount>
<StandardPremium>87</StandardPremium>
<OptionalPremium>0</OptionalPremium>
<StandardTax>0</StandardTax>
<OptionalTax>0</OptionalTax>
<ExtendedTax>0</ExtendedTax>
<ExtendedPremium>0</ExtendedPremium>
<PromotionalPremium>0</PromotionalPremium>
<FeesPremium>0</FeesPremium>
<FeesTax>0</FeesTax>
<StandardFeesPremium>0</StandardFeesPremium>
<OptionalFeesPremium>0</OptionalFeesPremium>
<Tax>0</Tax>
<StandardPremiumDistribution>
<Travelers>
<Traveler>
<TravelerPremium>42</TravelerPremium>
<TravelerTax>0</TravelerTax>
</Traveler>
<Traveler>
<TravelerPremium>45</TravelerPremium>
<TravelerTax>0</TravelerTax>
</Traveler>
</Travelers>
</StandardPremiumDistribution>
<PackagePremiumDistribution>
<Packages>
<Package>
<PackageID>20265</PackageID>
<PackageName />
<PackageTypeID>12</PackageTypeID>
<Premium>87</Premium>
<Fees>0</Fees>
<Tax>0</Tax>
<Travelers>
<Traveler>
<TravelerID>0</TravelerID>
<Premium>42</Premium>
<Tax>0</Tax>
</Traveler>
<Traveler>
<TravelerID>1</TravelerID>
<Premium>45</Premium>
<Tax>0</Tax>
</Traveler>
</Travelers>
</Package>
</Packages>
</PackagePremiumDistribution>
</Premium>
I would like to get the value of the (Traveler) Premium. In the case of only one traveler, I have been using an XMLDocument and the 'SelectSingleNode" function. For example I could do something like:
XmlDocument xmlDoc = new XmlDocument();
xmlDoc.Load(xmlResponse);
var premium = xmlDoc.SelectSingleNode("//TravelerPremium").InnerText;
But this wouldn't work when multiple travelers are returned under one plan. For example, I need the premium when TravelerID = 0. How would I go about doing this?
Thanks.
Using XmlDocument:
XmlDocument xmlDoc = new XmlDocument();
xmlDoc.Load(xmlResponse);
var premium = xmlDoc.SelectSingleNode("//Premium[../TravelerID = '0']")
You could also iterate through the nodes if multiple could match on this condition like so:
foreach(var premium in xmldoc.SelectNodes("//Premium[../TravelerID = '0']")
{
// do work on each premium node where TravelerID = 0
}
I'd encourage you to look into using LINQ to XML - it's generally easier to work with and will be more performant in most cases. You could even still use XPath expressions, but the following would work:
XDocument xdoc = XDocument.Load(xmlResponse);
var premium = (string)xdoc.Descendants("Traveler").Where(x => (string)x.Element("TravelerID") == "0").Element("Premium");
Assuming your xml looks like that, try something like this:
XmlDocument doc = new XmlDocument();
xmlDoc.Load(xmlResponse);
if (doc.HasChildNodes)
{
foreach (XmlNode node in doc.DocumentElement.ChildNodes)
if (node.Name == "StandardPremiumDistribution")
{
XmlNodeList xnList = node.SelectNodes("//Travelers");
double travelerPremium= xnList.Item(z).FirstChild.InnerText);
}}
Based on this, I think you're gonna do it.
Let's suppose you have a file called XMLFile1.xml with the XML you posted you can iterate through all your TravelerPremium with the following code:
XmlDocument xmlDoc = new XmlDocument();
xmlDoc.Load("XMLFile1.xml");
XmlNodeList premiums = xmlDoc.SelectNodes("//TravelerPremium");
foreach(XmlNode node in premiums)
{
MessageBox.Show(node.FirstChild.InnerText);
}
You can also acces the other elements with similar code.
I have one XML string, I am trying to read that using C#, but I am not getting child nodes. I am getting entire XML as inner XML string. I am not able to read the nodes. Here is my XML string and my code.
<Filters FilterName="706337_test">
<MemberName>Dorvil</MemberName>
<MemberId />
<ProviderName />
<ProviderId>706337</ProviderId>
<SelectedProjects>5030003</SelectedProjects>
<CNAChartSelected>false</CNAChartSelected>
<OldProject>false</OldProject>
</Filters>
C# code trying to read the XML nodes
XmlDocument xml = new XmlDocument();
xml.LoadXml(xmlstring);
XmlNodeList xnList = xml.SelectNodes("/Filters");
I can see only one child node that too filters, I need to read MemberId, MemberName etc., how to read them?
This is because your string in SelectNodes is wrong:
var xml = new XmlDocument();
xml.LoadXml(xmlstring);
var xnList1 = xml.SelectNodes("/Filters"); //list of 1 element
var xnList2 = xml.SelectNodes("/Filters/*"); //list of 7 elements
foreach (XmlNode node in xnList2)
{
Console.WriteLine(node.OuterXml);
}
Also you can use this:
var xElements = XElement.Parse(xmlstring).Elements();
foreach (var element in xElements)
{
Console.WriteLine(element);
}
You need to tell the app which nodes to read..
XmlDocument xml = new XmlDocument();
xml.LoadXml(xmlstring);
XmlNodeList xnList = xml.SelectNodes("/Filters");
foreach (XmlNode node in xnList)
{
string memberName = node["MemberName"].InnerText;
}
This lets the app know to read what is inside the MemberName node.. Do the same for the other nodes and post back your results. Debug as you go to see what you are getting out of each node.
I would like to replace the existing elements inthe xml tag with the new ones.
Sample XML is as follows:
<Dr.Watson>
<Bugs>
<Bug Name="Bug.add --> AAAAAAAAAAAA">
<criteria>
<includeFilterSets>
<filterSet>
<filter>
<filterName>PRODUCT_NAME</filterName>
<operator>
<name>Equals</name>
</operator>
<value>Dr.Watson</value>
</filter>
</filterSet>
</includeFilterSets>
<grouping>
<groupBy>
<name>STATUS</name>
</groupBy>
</grouping>
<caseSensitive>false</caseSensitive>
<entityToSearch>
<name>BUG</name>
</entityToSearch>
</criteria>
</Bug>
</Bugs>
</Dr.Watson>
Code so far i have :
XmlDocument doc = new XmlDocument();
doc.LoadXml(FilePath_EXPRESS_API_InputFile);
XmlNodeList nodelist = doc.SelectNodes("/Dr.Watson/Bugs/Bug");
//create node and add value
//Console.WriteLine(mxpwr.Value);
XmlNode node = doc.CreateNode(XmlNodeType.Element, "grouping", null);
XmlNode node11 = doc.CreateNode(XmlNodeType.Element, "groupBy", null);
XmlNode node12 = doc.CreateNode(XmlNodeType.Element, "name", null);
//Create Title Node
XmlNode Test_11 = doc.CreateElement("grouping");
XmlNode Test_22 = doc.CreateElement("groupBy");
XmlNode Test_44 = doc.CreateElement("name");
//add value for it
Test_11.InnerText = ("");
Test_22.InnerText = ("");
Test_44.InnerText = ("");
//create Url node
//XmlNode Test_445 = doc.CreateElement("sai");
Test_44.InnerText = ("STATE");
//add to parent node
Test_11.AppendChild(Test_22);
Test_22.AppendChild(Test_44);
//add to elements collection
doc.DocumentElement.AppendChild(Test_11);
Test_11.AppendChild(Test_22);
Test_22.AppendChild(Test_44);
Please suggest and help me as i am new to c# for xml scenarios.Thanks.Also, please note that i dont want to save these edits and want to use the edited xml runtime for the execution of APIs.
To replace a node via the XML-DOM API (XmlDocument et al):
Get an instance of XmlNode (or a subclass), parent, representing the parent element of the node you want to replace.
Use parent.RemoveChild to remove the old node.
Use parent.AppendChild to add the new node.
(As an alternative to #3 use parent.InsertAfter or parent.InsertBefore and a reference to another child to place the new node amongst other existing children.)
You code in the question appears to be constructing a new XML document from scratch: why would you want to replace a node—just create the right one first time. To modify an existing XML document use one of the static XmlDocument.Load methods to load and parse the existing document, use the various search and navigation methods to get the reference in #1 above, then apply the above steps, and finally save as normal.
I am currently trying to learn how to parse data, and its a bit confusing. can someone check out my code and see what I'm doing wrong or if im even heading in the right direction.
XML File:
<xml xmlns:a='BLAH'
xmlns:b='BLAH'
xmlns:c='BLAH'
xmlns:d='BLAH'>
<a:info>
<b:cat Option1='blah' Option2='blah' Option3='blah' />
</a:info>
</xml>
C# Code:
XmlDocument doc = new XmlDocument();
doc.Load(richTextBox2.Text);
XmlNamespaceManager man = new XmlNamespaceManager(doc.NameTable);
man.AddNamespace("a", "BLAH");
man.AddNamespace("b", "BLAH");
man.AddNamespace("c", "BLAH");
man.AddNamespace("d", "BLAH");
XmlNode temps = doc.SelectSingleNode("/a:info/b:cat/Option1/", man);
richTextBox1.Text = temps.InnerText;
I am new to C#, I cant find a good example explaining how to successfully use loops to find more then one:
<b:chat />
You are using the wrong API if you're looking for LINQ to XML. Use the XDocument class instead.
Assume the following input XML-document (please note namespace URLs):
<xml xmlns:a='http://localhost/scheme_a'
xmlns:b='http://localhost/scheme_b'
xmlns:c='http://localhost/scheme_c'
xmlns:d='http://localhost/scheme_d'>
<a:info>
<b:cat Option1='1' Option2='1' Option3='1' />
</a:info>
<a:info>
<b:cat Option1='2' Option2='2' Option3='2' />
</a:info>
</xml>
There are the ways to get all <b:chat /> elements.
XmlDocument class:
var xmlDocument = new XmlDocument();
xmlDocument.Load(...);
var xmlNamespaceManager = new XmlNamespaceManager(xmlDocument.NameTable);
xmlNamespaceManager.AddNamespace("a", "http://localhost/scheme_a");
xmlNamespaceManager.AddNamespace("b", "http://localhost/scheme_b");
xmlNamespaceManager.AddNamespace("c", "http://localhost/scheme_c");
xmlNamespaceManager.AddNamespace("d", "http://localhost/scheme_d");
var bCatNodes = xmlDocument.SelectNodes("/xml/a:info/b:cat", xmlNamespaceManager);
var option1Attributes = bCatNodes.Cast<XmlNode>().Select(node => node.Attributes["Option1"]);
// Also, all Option1 attributes can be retrieved directly using XPath:
// var option1Attributes = xmlDocument.SelectNodes("/xml/a:info/b:cat/#Option1", xmlNamespaceManager).Cast<XmlAttribute>();
LINQ to XML XDocument Class. XName can be passed with a namespace to Descendants() and Element() methods.
Use Descendants() to get all <b:chat /> elements.
var xDocument = XDocument.Load(...);
XNamespace xNamespace = "http://localhost/scheme_b";
var xElements = xDocument.Descendants(xNamespace + "cat");
// For example, get all the values of Option1 attribute for the b:chat elements:
var options1 = xElements.Select(element => element.Attribute("Option1")).ToList();
i am trying to grab the TopicName how should i go after it and try different combination but somehow i am unable to get TopicName below is my source codee...
XmlDocument xdoc = new XmlDocument();//xml doc used for xml parsing
xdoc.Load(
"http://latestpackagingnews.blogspot.com/feeds/posts/default"
);//loading XML in xml doc
XmlNodeList xNodelst = xdoc.DocumentElement.SelectNodes("content");//reading node so that we can traverse thorugh the XML
foreach (XmlNode xNode in xNodelst)//traversing XML
{
//litFeed.Text += "read";
}
sample xml file
<content type="application/xml">
<CatalogItems xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="sitename.xsd">
<CatalogSource Acronym="ABC" OrganizationName="ABC Corporation" />
<CatalogItem Id="3212" CatalogUrl="urlname">
<ContentItem xmlns:content="sitename.xsd" TargetUrl="url">
<content:SelectionSpec ClassList="" ElementList="" />
<content:Language Value="eng" Scheme="ISO 639-2" />
<content:Source Acronym="ABC" OrganizationName="ABC Corporation" />
<content:Topics Scheme="ABC">
<content:Topic TopicName="Marketing" />
<content:Topic TopiccName="Coverage" />
</content:Topics>
</ContentItem>
</CatalogItem>
</CatalogItems>
</content>
The Topic nodes in your XML are using the content namespace - you need to declare and use the XML namespace in your code, then you can use SelectNodes() to grab the nodes of interest - this worked for me:
XmlNamespaceManager nsmgr = new XmlNamespaceManager(xdoc.NameTable);
nsmgr.AddNamespace("content", "sitename.xsd");
var topicNodes = xdoc.SelectNodes("//content:Topic", nsmgr);
foreach (XmlNode node in topicNodes)
{
string topic = node.Attributes["TopicName"].Value;
}
Just as a comparison see how easy this would be with Linq to XML:
XDocument xdoc = XDocument.Load("test.xml");
XNamespace ns = "sitename.xsd";
string topic = xdoc.Descendants(ns + "Topic")
.Select(x => (string)x.Attribute("TopicName"))
.FirstOrDefault();
To get all topics you can replace the last statement with:
var topics = xdoc.Descendants(ns + "Topic")
.Select(x => (string)x.Attribute("TopicName"))
.ToList();
If you just need a specific element, then I'd use XPath:
This is a guide to use XPath in C#:
http://www.codeproject.com/KB/XML/usingXPathNavigator.aspx
And this is the query that will get you a collection of your Topics:
//content/CatalogItems/CatalogItem/ContentItem/content:Topics/content:Topic
You could tweak this query depending on what it is you're trying to accomplish, grabbing just a specific TopicName value:
//content/CatalogItems/CatalogItem/ContentItem/content:Topics/content:Topic/#TopicName
XPath is pretty easy to learn. I've done stuff like this pretty quickly with no prior knowledge.
You can paste you XML and xpath query here to test your queries:
http://www.bit-101.com/xpath/
The following quick and dirty LINQ to XML code obtains your TopicNames and prints them on the console.
XDocument lDoc = XDocument.Load(lXmlDocUri);
foreach (var lElement in lDoc.Element("content").Element(XName.Get("CatalogItems", "sitename.xsd")).Elements(XName.Get("CatalogItem", "sitename.xsd")))
{
foreach (var lContentTopic in lElement.Element(XName.Get("ContentItem", "sitename.xsd")).Element(XName.Get("Topics", "sitename.xsd")).Elements(XName.Get("Topic", "sitename.xsd")))
{
string lTitle = lContentTopic.Attribute("TopicName").Value;
Console.WriteLine(lTitle);
}
}
It'd have been a lot shorter if it wasn't for all the namespaces :) (Instead of "XName.Get" you would just use the name of the element).