We Keep Coding

How do I publish an Access database with my C# application using Visual Studio?

I'm trying to figure out how to publish an application I wrote. We didn't get to publishing in class, and my programming teacher is having some health issues and isn't available right now.
I found the "Publish" option, and can get it to create a folder with an install program... but I open it, and it just opens the program, and spams me infinitely, complaining that my Access database (located in the bin > debug in the build stage) can't be accessed (from some weird path I don't recognize). I tried using WiX, but it gave me an error when I tried to install, saying it doesn't have access to the install folder (running as admin). I've been googling for a few hours, poking at it, exploring, and I'm not getting too far. Can anyone ELI5?

When you use the "publish" option for desktop apps, VS creates a click-once installer that will place all the files it knows about in the appropriate locations.
Unfortunately, it can't guess which other files your application needs so you need to tell it explicitly.
If you right-click the Project->Properties, go to the Publish tab and click the "Application Files" button, you'll see all files that will be added to the installer.
Next, click "Show all files" at the bottom. Find your database, and change the Publish Status to "Data File".
Note that I've only ever used the Click Once installer to install static files (like images/documentation) that are never modified, only replaced in later releases. I'm not sure whether your (modified) db will be preserved during an update but I suspect not.
If the Click Once install process is too simple for your needs, VS2010 has "Setup Projects" which create more complex installers that support logic/code. For VS2012, the commonly suggested option is Wix. Unfortunately, it's got a steep learning curve but it can do pretty much anything you need.
I believe VS2013 and later have setup projects again through an extension but I haven't tried it myself.
Edit:
The easiest way around this is likely to set the connection string programatically based on where the application is executing from.
Note that as per this answer clickonce apps are usually executed from deep inside the user profile directory (also read the answer below about data directories). It's a side-effect of how ClickOnce works (it wants to install somewhere the user is guaranteed to have write access).
Check if there really is an .mdb in that folder. If not, you need to tweak the installer or the properties for the .mdb. Assuming it's in the same location as the executable, you can tell your application where to find it...
string dbPath = IO.Path.Combine(
AppDomain.CurrentDomain.BaseDirectory,
"access.mdb");
string connectionString = String.Format(
"Provider=Microsoft.Jet.OLEDB.4.0; Data Source={0}",
dbPath);
I'm not sure why you think the database file added by the installer is in a directory directly under C:\. It's possible you're not looking at the file created by the installer.
To avoid confusion, try changing the name from access.mdb to something else (temp.mdb?), build the installer, rename back to access.mdb. Now, when you've installed the application, make sure the file you're looking at is now called temp.mdb. If not, you're looking at the wrong file.

This Link Has Full demonstration of Database Connectivity And Publish a C# application with database. The application is also running on another machines.
How to Publish C# Application with access database

How to skip folder selection form when update installed application via Windows Installer setup project

As the title describes, I am trying to skip the folder selection form when update the installed application via setup project in visual studio(casue the user already selected folder path when they installed the app). I googled online and find a way to disable folder form: http://www.codeproject.com/Tips/437285/Visual-Studio-Deployment-Setup-Disable-Installatio. However, How to know if it is installation or upgrade? If we know it is upgrade, how to get the installation path?
Thanks in advance!
I do not find any approaches to skip that folder form. This should be the reason that many installer tools exist in the market. Since my app is very small, I simply disabled the folder selection dialog. For anyone who are interested, please check this URL: http://www.codeproject.com/Tips/437285/Visual-Studio-Deployment-Setup-Disable-Installatio

If you saved the original install location in the registry, for example by saving [TARGETDIR] in a registry item, then you can retrieve it during an upgrade. You find out you're doing an upgrade because it will set a property called PREVIOUSVERSIONSINSTALLED. The problem is that there is no way to wire it all up in a VS setup project. You want the browse dialog there (not deleted) but you want to skip it if PREVIOUSVERSIONSINSTALLED has been set, and there's no support in VS setup projects for that. You'd need to go into the ControlEvent table in the MSI file and figure out how to skip the browse dialog, as well as have the Back button skip over if necessary, and that's just very difficult.
What's the actual issue? Visual Studio upgrades are complete installs that uninstall the previous product and install the new one wherever the user wants, so why is it necessary to install in the same location as the previous install?

Visual Studio Setup Project not removing DLL

I have a problem regarding the Visual Studio Setup Project and uninstalling an application.
This is a very basic installer, installing an ApplicationLauncher.exe C# .NET 4.0 console application and an Application.Common.dll (a dependency of the application ApplicationLauncher.exe).
The installation is a success, copying both the exe and DLL into the program files folder C:\Program Files (x86)\Company\ApplicationLauncher\.
My problem comes when uninstalling the application (through the MSI) - the uninstall seems successful, however it leaves Application.Common.dll behind, and doesn't remove it as I would expect.
I've used ProcessExplorer to make sure nothing else is using the DLL, no explorer windows are open during the uninstall.
Is this the expected functionality and do I have to create a custom action to remove this DLL? Or have I done something wrong? :S

It seems I was able to fix this issue by renaming the solution and product name of the application, I'm not sure how this fixed it, but it did.
My only thoughts here is this traversed through to the installer, where the application installed into a different folder, thus not applying the same permissions to the DLL..

It's not expected, no. It will happen if you ever done any of the following with your setup and installed it:
Marked the file Permanent.
Marked the file SharedLegacyFile true.
These are project settings, but if you set either of them and do the install it will stay behind. You can unset them in the setup project but that's too late - you've marked that component permanent or sharedlegacy on the system. If you use a brand new system, like a fresh virtual machine, reset these values if they are set and rebuild the MSI and do the install/uninstall does it still happen?

I had the same problem. Then I have tried to install and unistall my app on Windows XP and that had worked.

Renaming the ProductCode is treating the symptoms not the cause. The problem occurs when the uninstaller doesn't remove the dll. The next install will use the dll again and can't remove it on an uninstall event because it's still used by the other program.
These steps hopefully solve the problem:
Install your Software
Open CMD (with admin privileges) and run:
msiexec /x {ProductCode} /L*V "C:\CustomPath\FileName.log"
The ProductCode can be found when hitting F4 on the Setup Project
Open the log file and search for the lines that look something like this:
Disallowing uninstallation of component: {6CEC09F6-9108-7062-A692-2BCBACEE3BD8} since another client exists
Disallowing uninstallation of component: {A0A0FA84-CC0D-C5C4-1F57-169788C4482D} since another client exists
Disallowing uninstallation of component: {XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX} since another client exists
All these components have to be removed from the registry by hand. To do this the GUID (e.g. {6CEC09F6-9108-7062-A692-2BCBACEE3BD8}) first has to be converted into a packed/compressed GUID (e.g. 6F90CEC6801926076A29B2BCCAEEB38D). I found a Website where one can run a script to do this. Find the following code on the website and replace the right side with the GUID from the log.
string inStrGUID = "{6CEC09F6-9108-7062-A692-2BCBACEE3BD8}";
Open the registry (as an administrater) and search (Edit -> Find...) for the compressed GUID (uasually it's somewhere in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Components\)
Delete the folder that is equal to the compressed GUID. The values inside the folder should be a path to the dll.
Once deleted select the parent folder (...\S-1-5-18\components) and hit Edit -> Find...
Repeat these steps (4-7) for all components from the log file.
It's also a good idea to delete all files still present in the original folder that weren't uninstalled.
Can one prevent this from happening?
I don't know. This really isn't that easy to reproduce. Some other post on SO have suspected the install/uninstall option in Visual Studio to be the cause of the problem but I have a different theory:
This bug might be the result of RemoveExistingProducts in InstallExecuteSequence in the Setup being executed too late and therefore not removing dlls at the right time. This bug is known for years and can be fixed by doing this. If you need help with Orca this explains how to install it.

c# Check if there is a file on server with specific name

I making a program and wanted to make an update function... So lets say I make one update and put it on my dropbox.. When someone click on update, the program will check if there any file with different name (no same version) on the server and if there is, then start to download it.. Is it possible?
And my second problem I installed my program on my computer but when start the installer again it says:
Another version of this product is already installed. Installation cof this version cannot continue. To configure or remove the existing version of this product use add/remove programs on the control panel.
I want when I run second time installer a confirmation message appear if he want to delete previous version to install this one (I need this for the update)

You could create a web service that provides an index / manifest of a directory that you want to synchronize. The web service could also provide methods for uploading and downloading the synchronized files and folders.
If you are using a Visual Studio Setup Project (.msi) you can simply change the installer version. Visual Studio sees the change and asks you if you want to change the product code. You would say 'yes'. The installer should then remove previous versions before installing the latest. You would also want DetectNewerInstalledVersion = true and RemovePreviousVersions = true.
Not sure if it works for this scenario but you may want to look at a ClickOnce deployment. It may solve both of your problems. ClickOnce Deployment

Simplifying setup and deployment in c#

I have made an application, which keeps getting updated frequently. So every time a change occurs, i've to include it's fresh builds to the setup and deployment program again and again. Is there any way to simplify the procedure? The files to be added are static in number and exist in a folder. I've heard we can write installer classes in c#, does my requirement has any thing to do with it?
I think ClickOnce doesn't suit my requirement because, for the first time i want it to run like a setup package, since it has some packages and some settings needed to be implemented on the user's machine at the time of install. Can click once help me with that? Also i want to run my application as an administrator and it references to many external dll files. So will it help my purpose?
I finally did it using clickonce deployment. I used content files to mark all the files i wanted to copy to the target computer and used clickonce deployment. Then i modified the way my program starts, so that i can lauch the installer script i wanted to run only when the app runs for the first time. Further i hosted it on IIS and had to change lot of MIME types and add new ones for the download to work over internet

Look into something called "ClickOnce" deployment. It automates a lot of what you're talking about.
EDIT: You can add custom installer actions to a ClickOnce project just like any other, to set up additional components and whatnot. As for permissions, ClickOnce will let you run as administrator if you so choose, but that sort of thing isn't recommended, and it might whine about it.

You can use ClickOnce (http://msdn.microsoft.com/en-us/library/t71a733d(VS.80).aspx) which simplify the deployment process.
Maybe you can also automate the build process using NANT (http://nant.sourceforge.net/).
HTH

Yes, you can do that.
I assume you want the client to update itself when ever there is a new version.
This needs a few changes in the client code. Essentially how it works is check for availablilty of new version at a predefined location. Update you new versions to this location. On the client side, show a message to the user if he/she wants to upgrade to the new version.
You can find a link to sample project out here and here.

You can add a Setup project in your solution inside Visual Studio and then add your other project(s) outputs, or static files to the Setup project as references. The Setup project will then detect your dependencies automatically and each time you do a Rebuild All (or you rebuild/build your Setup project) it will automatically include all the necessary files.

What type of project is it? In many cases, ClickOnce can do the job for you, at nominal effort.
Beyond that - you can usually hook your installer build into your build process; some tools will do this for you.
Installer classes run at the client - so I don't think they relate to your build process...

I would flag the files as Content in their respective properties and then in the deployment project right click the project, go to File System and then right click the folder, click Add and select Content Files from the dialog box. This should copy the newest files over every time you build the deployment project.