We Keep Coding

asp.net MVC Seed a database from a .TXT file with code first (over 10000 words) [duplicate]

I am using a list to limit the file size since the target is limited in disk and ram.
This is what I am doing now but is there a more efficient way?
readonly List<string> LogList = new List<string>();
...
var logFile = File.ReadAllLines(LOG_PATH);
foreach (var s in logFile) LogList.Add(s);

var logFile = File.ReadAllLines(LOG_PATH);
var logList = new List<string>(logFile);
Since logFile is an array, you can pass it to the List<T> constructor. This eliminates unnecessary overhead when iterating over the array, or using other IO classes.
Actual constructor implementation:
public List(IEnumerable<T> collection)
{
...
ICollection<T> c = collection as ICollection<T>;
if( c != null) {
int count = c.Count;
if (count == 0)
{
_items = _emptyArray;
}
else {
_items = new T[count];
c.CopyTo(_items, 0);
_size = count;
}
}
...
}

A little update to Evan Mulawski answer to make it shorter
List<string> allLinesText = File.ReadAllLines(fileName).ToList()

Why not use a generator instead?
private IEnumerable<string> ReadLogLines(string logPath) {
using(StreamReader reader = File.OpenText(logPath)) {
string line = "";
while((line = reader.ReadLine()) != null) {
yield return line;
}
}
}
Then you can use it like you would use the list:
var logFile = ReadLogLines(LOG_PATH);
foreach(var s in logFile) {
// Do whatever you need
}
Of course, if you need to have a List<string>, then you will need to keep the entire file contents in memory. There's really no way around that.

You can simple read this way .
List<string> lines = System.IO.File.ReadLines(completePath).ToList();

[Edit]
If you are doing this to trim the beginning of a log file, you can avoid loading the entire file by doing something like this:
// count the number of lines in the file
int count = 0;
using (var sr = new StreamReader("file.txt"))
{
while (sr.ReadLine() != null)
count++;
}
// skip first (LOG_MAX - count) lines
count = LOG_MAX - count;
using (var sr = new StreamReader("file.txt"))
using (var sw = new StreamWriter("output.txt"))
{
// skip several lines
while (count > 0 && sr.ReadLine() != null)
count--;
// continue copying
string line = "";
while ((line = sr.ReadLine()) != null)
sw.WriteLine(line);
}
First of all, since File.ReadAllLines loads the entire file into a string array (string[]), copying to a list is redundant.
Second, you must understand that a List is implemented using a dynamic array under the hood. This means that CLR will need to allocate and copy several arrays until it can accommodate the entire file. Since the file is already on disk, you might consider trading speed for memory and working on disk data directly, or processing it in smaller chunks.
If you need to load it entirely in memory, at least try to leave in an array:
string[] lines = File.ReadAllLines("file.txt");
If it really needs to be a List, load lines one by one:
List<string> lines = new List<string>();
using (var sr = new StreamReader("file.txt"))
{
while (sr.Peek() >= 0)
lines.Add(sr.ReadLine());
}
Note: List<T> has a constructor which accepts a capacity parameter. If you know the number of lines in advance, you can prevent multiple allocations by preallocating the array in advance:
List<string> lines = new List<string>(NUMBER_OF_LINES);
Even better, avoid storing the entire file in memory and process it "on the fly":
using (var sr = new StreamReader("file.txt"))
{
string line;
while ((line = sr.ReadLine()) != null)
{
// process the file line by line
}
}

Don't store it if possible. Just read through it if you are memory constrained. You can use a StreamReader:
using (var reader = new StreamReader("file.txt"))
{
var line = reader.ReadLine();
// process line here
}
This can be wrapped in a method which yields strings per line read if you want to use LINQ.

//this is only good in .NET 4
//read your file:
List<string> ReadFile = File.ReadAllLines(#"C:\TEMP\FILE.TXT").ToList();
//manipulate data here
foreach(string line in ReadFile)
{
//do something here
}
//write back to your file:
File.WriteAllLines(#"C:\TEMP\FILE2.TXT", ReadFile);

List<string> lines = new List<string>();
using (var sr = new StreamReader("file.txt"))
{
while (sr.Peek() >= 0)
lines.Add(sr.ReadLine());
}
i would suggest this... of Groo's answer.

string inLine = reader.ReadToEnd();
myList = inLine.Split(new string[] { "\r\n" }, StringSplitOptions.None).ToList();
I also use the Environment.NewLine.toCharArray as well, but found that didn't work on a couple files that did end in \r\n. Try either one and I hope it works well for you.

string inLine = reader.ReadToEnd();
myList = inLine.Split(new string[] { "\r\n" }, StringSplitOptions.None).ToList();
This answer misses the original point, which was that they were getting an OutOfMemory error. If you proceed with the above version, you are sure to hit it if your system does not have the appropriate CONTIGUOUS available ram to load the file.
You simply must break it into parts, and either store as List or String[] either way.

Replace a line in text file without creating another file [duplicate]

I have two text files, Source.txt and Target.txt. The source will never be modified and contain N lines of text. So, I want to delete a specific line of text in Target.txt, and replace by an specific line of text from Source.txt, I know what number of line I need, actually is the line number 2, both files.
I haven something like this:
string line = string.Empty;
int line_number = 1;
int line_to_edit = 2;
using StreamReader reader = new StreamReader(#"C:\target.xml");
using StreamWriter writer = new StreamWriter(#"C:\target.xml");
while ((line = reader.ReadLine()) != null)
{
if (line_number == line_to_edit)
writer.WriteLine(line);
line_number++;
}
But when I open the Writer, the target file get erased, it writes the lines, but, when opened, the target file only contains the copied lines, the rest get lost.
What can I do?

the easiest way is :
static void lineChanger(string newText, string fileName, int line_to_edit)
{
string[] arrLine = File.ReadAllLines(fileName);
arrLine[line_to_edit - 1] = newText;
File.WriteAllLines(fileName, arrLine);
}
usage :
lineChanger("new content for this line" , "sample.text" , 34);

You can't rewrite a line without rewriting the entire file (unless the lines happen to be the same length). If your files are small then reading the entire target file into memory and then writing it out again might make sense. You can do that like this:
using System;
using System.IO;
class Program
{
static void Main(string[] args)
{
int line_to_edit = 2; // Warning: 1-based indexing!
string sourceFile = "source.txt";
string destinationFile = "target.txt";
// Read the appropriate line from the file.
string lineToWrite = null;
using (StreamReader reader = new StreamReader(sourceFile))
{
for (int i = 1; i <= line_to_edit; ++i)
lineToWrite = reader.ReadLine();
}
if (lineToWrite == null)
throw new InvalidDataException("Line does not exist in " + sourceFile);
// Read the old file.
string[] lines = File.ReadAllLines(destinationFile);
// Write the new file over the old file.
using (StreamWriter writer = new StreamWriter(destinationFile))
{
for (int currentLine = 1; currentLine <= lines.Length; ++currentLine)
{
if (currentLine == line_to_edit)
{
writer.WriteLine(lineToWrite);
}
else
{
writer.WriteLine(lines[currentLine - 1]);
}
}
}
}
}
If your files are large it would be better to create a new file so that you can read streaming from one file while you write to the other. This means that you don't need to have the whole file in memory at once. You can do that like this:
using System;
using System.IO;
class Program
{
static void Main(string[] args)
{
int line_to_edit = 2;
string sourceFile = "source.txt";
string destinationFile = "target.txt";
string tempFile = "target2.txt";
// Read the appropriate line from the file.
string lineToWrite = null;
using (StreamReader reader = new StreamReader(sourceFile))
{
for (int i = 1; i <= line_to_edit; ++i)
lineToWrite = reader.ReadLine();
}
if (lineToWrite == null)
throw new InvalidDataException("Line does not exist in " + sourceFile);
// Read from the target file and write to a new file.
int line_number = 1;
string line = null;
using (StreamReader reader = new StreamReader(destinationFile))
using (StreamWriter writer = new StreamWriter(tempFile))
{
while ((line = reader.ReadLine()) != null)
{
if (line_number == line_to_edit)
{
writer.WriteLine(lineToWrite);
}
else
{
writer.WriteLine(line);
}
line_number++;
}
}
// TODO: Delete the old file and replace it with the new file here.
}
}
You can afterwards move the file once you are sure that the write operation has succeeded (no excecption was thrown and the writer is closed).
Note that in both cases it is a bit confusing that you are using 1-based indexing for your line numbers. It might make more sense in your code to use 0-based indexing. You can have 1-based index in your user interface to your program if you wish, but convert it to a 0-indexed before sending it further.
Also, a disadvantage of directly overwriting the old file with the new file is that if it fails halfway through then you might permanently lose whatever data wasn't written. By writing to a third file first you only delete the original data after you are sure that you have another (corrected) copy of it, so you can recover the data if the computer crashes halfway through.
A final remark: I noticed that your files had an xml extension. You might want to consider if it makes more sense for you to use an XML parser to modify the contents of the files instead of replacing specific lines.

When you create a StreamWriter it always create a file from scratch, you will have to create a third file and copy from target and replace what you need, and then replace the old one.
But as I can see what you need is XML manipulation, you might want to use XmlDocument and modify your file using Xpath.

You need to Open the output file for write access rather than using a new StreamReader, which always overwrites the output file.
StreamWriter stm = null;
fi = new FileInfo(#"C:\target.xml");
if (fi.Exists)
stm = fi.OpenWrite();
Of course, you will still have to seek to the correct line in the output file, which will be hard since you can't read from it, so unless you already KNOW the byte offset to seek to, you probably really want read/write access.
FileStream stm = fi.Open(FileMode.OpenOrCreate, FileAccess.ReadWrite, FileShare.None);
with this stream, you can read until you get to the point where you want to make changes, then write. Keep in mind that you are writing bytes, not lines, so to overwrite a line you will need to write the same number of characters as the line you want to change.

I guess the below should work (instead of the writer part from your example). I'm unfortunately with no build environment so It's from memory but I hope it helps
using (var fs = File.Open(filePath, FileMode.Open, FileAccess.ReadWrite)))
{
var destinationReader = StreamReader(fs);
var writer = StreamWriter(fs);
while ((line = reader.ReadLine()) != null)
{
if (line_number == line_to_edit)
{
writer.WriteLine(lineToWrite);
}
else
{
destinationReader .ReadLine();
}
line_number++;
}
}

The solution works fine. But I need to change single-line text when the same text is in multiple places. For this, need to define a trackText to start finding after that text and finally change oldText with newText.
private int FindLineNumber(string fileName, string trackText, string oldText, string newText)
{
int lineNumber = 0;
string[] textLine = System.IO.File.ReadAllLines(fileName);
for (int i = 0; i< textLine.Length;i++)
{
if (textLine[i].Contains(trackText)) //start finding matching text after.
traced = true;
if (traced)
if (textLine[i].Contains(oldText)) // Match text
{
textLine[i] = newText; // replace text with new one.
traced = false;
System.IO.File.WriteAllLines(fileName, textLine);
lineNumber = i;
break; //go out from loop
}
}
return lineNumber
}

MemoryStream to string[]

I read the content of a CSV file from a zip file in memory(the requirment is not to write to disk) into the MemoryStream. and use to following code to get the human readable string
string result = Encoding.ASCII.GetString(memoryStream.ToArray());
However, we would like the result to be a string[] to map each row in the CSV file.
Is there a way to handle this automatically?
Thanks

Firstly, there's no need to call ToArray on the memory stream. Just use a StreamReader, and call ReadLine() repeatedly:
memoryStream.Position = 0; // Rewind!
List<string> rows = new List<string>();
// Are you *sure* you want ASCII?
using (var reader = new StreamReader(memoryStream, Encoding.ASCII))
{
string line;
while ((line = reader.ReadLine()) != null)
{
rows.Add(line);
}
}

You can use Split method to split string by newlines:
string[] result = Encoding.
ASCII.
GetString(memoryStream.ToArray()).
Split(new string[] { Environment.NewLine }, StringSplitOptions.None);

Depending on the contents of your CSV file, this can be a much harder problem than you're giving it credit for.
assume this is your csv:
id, data1, data2
1, some data, more data
2, "This element has a new line
right in the middle of the field", and that can create problems if you're reading line by line
If you simply read this in line by line with reader.ReadLine(), you're not going to get what you want if you happen to have quoted fields with new lines in the middle (which is generally allowed in CSVs). you need something more like this
List<String> results = new List<string>();
StringBuilder nextRow = new StringBuilder();
bool inQuote = false;
char nextChar;
while(reader.ReadChar(out nextChar)){ // pretend ReadChar reads a char into nextChar and returns false when it hits EOF
if(nextChar == '"'){
inQuote = !inQuote;
} else if(!inQuote && nextChar == '\n'){
results.Add(nextRow.ToString());
nextRow.Length = 0;
} else{ nextString.Append(nextChar); }
}
note that this handles double quotes. Missing quotes will be a problem, but they always are in .csv files.

How to split the large text file(32 GB) using C#

I tried to split the file about 32GB using the below code but I got the memory exception.
Please suggest me to split the file using C#.
string[] splitFile = File.ReadAllLines(#"E:\\JKS\\ImportGenius\\0.txt");
int cycle = 1;
int splitSize = Convert.ToInt32(txtNoOfLines.Text);
var chunk = splitFile.Take(splitSize);
var rem = splitFile.Skip(splitSize);
while (chunk.Take(1).Count() > 0)
{
string filename = "file" + cycle.ToString() + ".txt";
using (StreamWriter sw = new StreamWriter(filename))
{
foreach (string line in chunk)
{
sw.WriteLine(line);
}
}
chunk = rem.Take(splitSize);
rem = rem.Skip(splitSize);
cycle++;
}

Well, to start with you need to use File.ReadLines (assuming you're using .NET 4) so that it doesn't try to read the whole thing into memory. Then I'd just keep calling a method to spit the "next" however many lines to a new file:
int splitSize = Convert.ToInt32(txtNoOfLines.Text);
using (var lineIterator = File.ReadLines(...).GetEnumerator())
{
bool stillGoing = true;
for (int chunk = 0; stillGoing; chunk++)
{
stillGoing = WriteChunk(lineIterator, splitSize, chunk);
}
}
...
private static bool WriteChunk(IEnumerator<string> lineIterator,
int splitSize, int chunk)
{
using (var writer = File.CreateText("file " + chunk + ".txt"))
{
for (int i = 0; i < splitSize; i++)
{
if (!lineIterator.MoveNext())
{
return false;
}
writer.WriteLine(lineIterator.Current);
}
}
return true;
}

Do not read immediately all lines into an array, but use StremReader.ReadLine method, like:
using (StreamReader sr = new StreamReader(#"E:\\JKS\\ImportGenius\\0.txt"))
{
while (sr.Peek() >= 0)
{
var fileLine = sr.ReadLine();
//do something with line
}
}

File.ReadAllLines
That will read the whole file into memory.
To work with large files you need to only read what you need now into memory, and then throw that away as soon as you have finished with it.
A better option would be File.ReadLines which returns a lazy enumerator, data is only read into memory as you get the next line from the enumerator. Providing you avoid multiple enumerations (eg. don't use Count()) only parts of the file will be read.

Instead of reading all the file at once using File.ReadAllLines, use File.ReadLines in a foreach loop to read the lines as needed.
foreach (var line in File.ReadLines(#"E:\\JKS\\ImportGenius\\0.txt"))
{
// Do something
}
Edit: On an unrelated note, you don't have to escape your backslashes when prefixing the string with a '#'. So either write "E:\\JKS\\ImportGenius\\0.txt" or #"E:\JKS\ImportGenius\0.txt", but #"E:\\JKS\\ImportGenius\\0.txt" is redundant.

The problem here is that you are reading the entire file's content into memory at once with File.ReadAllLines(). What you need to do is open a FileStream with File.OpenRead() and read/write smaller chunks.
Edit: Actually for your case ReadLine is obviously better. See other answers. :)

Use a StreamReader to read the file, write with a StreamWriter.

Delete specific line from a text file?

I need to delete an exact line from a text file but I cannot for the life of me workout how to go about doing this.
Any suggestions or examples would be greatly appreciated?
Related Questions
Efficient way to delete a line from a text file (C#)

If the line you want to delete is based on the content of the line:
string line = null;
string line_to_delete = "the line i want to delete";
using (StreamReader reader = new StreamReader("C:\\input")) {
using (StreamWriter writer = new StreamWriter("C:\\output")) {
while ((line = reader.ReadLine()) != null) {
if (String.Compare(line, line_to_delete) == 0)
continue;
writer.WriteLine(line);
}
}
}
Or if it is based on line number:
string line = null;
int line_number = 0;
int line_to_delete = 12;
using (StreamReader reader = new StreamReader("C:\\input")) {
using (StreamWriter writer = new StreamWriter("C:\\output")) {
while ((line = reader.ReadLine()) != null) {
line_number++;
if (line_number == line_to_delete)
continue;
writer.WriteLine(line);
}
}
}

The best way to do this is to open the file in text mode, read each line with ReadLine(), and then write it to a new file with WriteLine(), skipping the one line you want to delete.
There is no generic delete-a-line-from-file function, as far as I know.

One way to do it if the file is not very big is to load all the lines into an array:
string[] lines = File.ReadAllLines("filename.txt");
string[] newLines = RemoveUnnecessaryLine(lines);
File.WriteAllLines("filename.txt", newLines);

Hope this simple and short code will help.
List linesList = File.ReadAllLines("myFile.txt").ToList();
linesList.RemoveAt(0);
File.WriteAllLines("myFile.txt"), linesList.ToArray());
OR use this
public void DeleteLinesFromFile(string strLineToDelete)
{
string strFilePath = "Provide the path of the text file";
string strSearchText = strLineToDelete;
string strOldText;
string n = "";
StreamReader sr = File.OpenText(strFilePath);
while ((strOldText = sr.ReadLine()) != null)
{
if (!strOldText.Contains(strSearchText))
{
n += strOldText + Environment.NewLine;
}
}
sr.Close();
File.WriteAllText(strFilePath, n);
}

You can actually use C# generics for this to make it real easy:
var file = new List<string>(System.IO.File.ReadAllLines("C:\\path"));
file.RemoveAt(12);
File.WriteAllLines("C:\\path", file.ToArray());

This can be done in three steps:
// 1. Read the content of the file
string[] readText = File.ReadAllLines(path);
// 2. Empty the file
File.WriteAllText(path, String.Empty);
// 3. Fill up again, but without the deleted line
using (StreamWriter writer = new StreamWriter(path))
{
foreach (string s in readText)
{
if (!s.Equals(lineToBeRemoved))
{
writer.WriteLine(s);
}
}
}

Read and remember each line
Identify the one you want to get rid
of
Forget that one
Write the rest back over the top of
the file

I cared about the file's original end line characters ("\n" or "\r\n") and wanted to maintain them in the output file (not overwrite them with what ever the current environment's char(s) are like the other answers appear to do). So I wrote my own method to read a line without removing the end line chars then used it in my DeleteLines method (I wanted the option to delete multiple lines, hence the use of a collection of line numbers to delete).
DeleteLines was implemented as a FileInfo extension and ReadLineKeepNewLineChars a StreamReader extension (but obviously you don't have to keep it that way).
public static class FileInfoExtensions
{
public static FileInfo DeleteLines(this FileInfo source, ICollection<int> lineNumbers, string targetFilePath)
{
var lineCount = 1;
using (var streamReader = new StreamReader(source.FullName))
{
using (var streamWriter = new StreamWriter(targetFilePath))
{
string line;
while ((line = streamReader.ReadLineKeepNewLineChars()) != null)
{
if (!lineNumbers.Contains(lineCount))
{
streamWriter.Write(line);
}
lineCount++;
}
}
}
return new FileInfo(targetFilePath);
}
}
public static class StreamReaderExtensions
{
private const char EndOfFile = '\uffff';
/// <summary>
/// Reads a line, similar to ReadLine method, but keeps any
/// new line characters (e.g. "\r\n" or "\n").
/// </summary>
public static string ReadLineKeepNewLineChars(this StreamReader source)
{
if (source == null)
throw new ArgumentNullException(nameof(source));
char ch = (char)source.Read();
if (ch == EndOfFile)
return null;
var sb = new StringBuilder();
while (ch != EndOfFile)
{
sb.Append(ch);
if (ch == '\n')
break;
ch = (char)source.Read();
}
return sb.ToString();
}
}

Are you on a Unix operating system?
You can do this with the "sed" stream editor. Read the man page for "sed"

What?
Use file open, seek position then stream erase line using null.
Gotch it? Simple,stream,no array that eat memory,fast.
This work on vb.. Example search line culture=id where culture are namevalue and id are value and we want to change it to culture=en
Fileopen(1, "text.ini")
dim line as string
dim currentpos as long
while true
line = lineinput(1)
dim namevalue() as string = split(line, "=")
if namevalue(0) = "line name value that i want to edit" then
currentpos = seek(1)
fileclose()
dim fs as filestream("test.ini", filemode.open)
dim sw as streamwriter(fs)
fs.seek(currentpos, seekorigin.begin)
sw.write(null)
sw.write(namevalue + "=" + newvalue)
sw.close()
fs.close()
exit while
end if
msgbox("org ternate jua bisa, no line found")
end while
that's all..use #d