We Keep Coding

If you derive from a class which has interface IDispose, do you need to implement Dispose? [duplicate]

C# 2008
I have been working on this for a while now, and I am still confused about the use of finalize and dispose methods in code. My questions are below:
I know that we only need a finalizer while disposing unmanaged resources. However, if there are managed resources that make calls to unmanaged resources, would it still need to implement a finalizer?
However, if I develop a class that doesn't use any unmanaged resource - directly or indirectly, should I implement the IDisposable to allow the clients of that class to use the 'using statement'?
Would it be feasible to implement IDisposable just to enable clients of your class to use the using statement?
using(myClass objClass = new myClass())
{
// Do stuff here
}
I have developed this simple code below to demonstrate the Finalize/dispose use:
public class NoGateway : IDisposable
{
private WebClient wc = null;
public NoGateway()
{
wc = new WebClient();
wc.DownloadStringCompleted += wc_DownloadStringCompleted;
}
// Start the Async call to find if NoGateway is true or false
public void NoGatewayStatus()
{
// Start the Async's download
// Do other work here
wc.DownloadStringAsync(new Uri(www.xxxx.xxx));
}
private void wc_DownloadStringCompleted(object sender, DownloadStringCompletedEventArgs e)
{
// Do work here
}
// Dispose of the NoGateway object
public void Dispose()
{
wc.DownloadStringCompleted -= wc_DownloadStringCompleted;
wc.Dispose();
GC.SuppressFinalize(this);
}
}
Question about the source code:
Here I have not added the finalizer, and normally the finalizer will be called by the GC, and the finalizer will call the Dispose. As I don't have the finalizer, when do I call the Dispose method? Is it the client of the class that has to call it?
So my class in the example is called NoGateway and the client could use and dispose of the class like this:
using(NoGateway objNoGateway = new NoGateway())
{
// Do stuff here
}
Would the Dispose method be automatically called when execution reaches the end of the using block, or does the client have to manually call the dispose method? i.e.
NoGateway objNoGateway = new NoGateway();
// Do stuff with object
objNoGateway.Dispose(); // finished with it
I am using the WebClient class in my NoGateway class. Because WebClient implements the IDisposable interface, does this mean that WebClient indirectly uses unmanaged resources? Is there a hard and fast rule to follow this? How do I know that a class uses unmanaged resources?

The recommended IDisposable pattern is here. When programming a class that uses IDisposable, generally you should use two patterns:
When implementing a sealed class that doesn't use unmanaged resources, you simply implement a Dispose method as with normal interface implementations:
public sealed class A : IDisposable
{
public void Dispose()
{
// get rid of managed resources, call Dispose on member variables...
}
}
When implementing an unsealed class, do it like this:
public class B : IDisposable
{
public void Dispose()
{
Dispose(true);
GC.SuppressFinalize(this);
}
protected virtual void Dispose(bool disposing)
{
if (disposing)
{
// get rid of managed resources
}
// get rid of unmanaged resources
}
// only if you use unmanaged resources directly in B
//~B()
//{
// Dispose(false);
//}
}
Notice that I haven't declared a finalizer in B; you should only implement a finalizer if you have actual unmanaged resources to dispose. The CLR deals with finalizable objects differently to non-finalizable objects, even if SuppressFinalize is called.
So, you shouldn't declare a finalizer unless you have to, but you give inheritors of your class a hook to call your Dispose and implement a finalizer themselves if they use unmanaged resources directly:
public class C : B
{
private IntPtr m_Handle;
protected override void Dispose(bool disposing)
{
if (disposing)
{
// get rid of managed resources
}
ReleaseHandle(m_Handle);
base.Dispose(disposing);
}
~C() {
Dispose(false);
}
}
If you're not using unmanaged resources directly (SafeHandle and friends doesn't count, as they declare their own finalizers), then don't implement a finalizer, as the GC deals with finalizable classes differently, even if you later suppress the finalizer. Also note that, even though B doesn't have a finalizer, it still calls SuppressFinalize to correctly deal with any subclasses that do implement a finalizer.
When a class implements the IDisposable interface, it means that somewhere there are some unmanaged resources that should be got rid of when you've finished using the class. The actual resources are encapsulated within the classes; you don't need to explicitly delete them. Simply calling Dispose() or wrapping the class in a using(...) {} will make sure any unmanaged resources are got rid of as necessary.

The official pattern to implement IDisposable is hard to understand. I believe this one is better:
public class BetterDisposableClass : IDisposable {
public void Dispose() {
CleanUpManagedResources();
CleanUpNativeResources();
GC.SuppressFinalize(this);
}
protected virtual void CleanUpManagedResources() {
// ...
}
protected virtual void CleanUpNativeResources() {
// ...
}
~BetterDisposableClass() {
CleanUpNativeResources();
}
}
An even better solution is to have a rule that you always have to create a wrapper class for any unmanaged resource that you need to handle:
public class NativeDisposable : IDisposable {
public void Dispose() {
CleanUpNativeResource();
GC.SuppressFinalize(this);
}
protected virtual void CleanUpNativeResource() {
// ...
}
~NativeDisposable() {
CleanUpNativeResource();
}
}
With SafeHandle and its derivatives, these classes should be very rare.
The result for disposable classes that don't deal directly with unmanaged resources, even in the presence of inheritance, is powerful: they don't need to be concerned with unmanaged resources anymore. They'll be simple to implement and to understand:
public class ManagedDisposable : IDisposable {
public virtual void Dispose() {
// dispose of managed resources
}
}

Note that any IDisposable implementation should follow the below pattern (IMHO). I developed this pattern based on info from several excellent .NET "gods" the .NET Framework Design Guidelines (note that MSDN does not follow this for some reason!). The .NET Framework Design Guidelines were written by Krzysztof Cwalina (CLR Architect at the time) and Brad Abrams (I believe the CLR Program Manager at the time) and Bill Wagner ([Effective C#] and [More Effective C#] (just take a look for these on Amazon.com:
Note that you should NEVER implement a Finalizer unless your class directly contains (not inherits) UNmanaged resources. Once you implement a Finalizer in a class, even if it is never called, it is guaranteed to live for an extra collection. It is automatically placed on the Finalization Queue (which runs on a single thread). Also, one very important note...all code executed within a Finalizer (should you need to implement one) MUST be thread-safe AND exception-safe! BAD things will happen otherwise...(i.e. undetermined behavior and in the case of an exception, a fatal unrecoverable application crash).
The pattern I've put together (and written a code snippet for) follows:
#region IDisposable implementation
//TODO remember to make this class inherit from IDisposable -> $className$ : IDisposable
// Default initialization for a bool is 'false'
private bool IsDisposed { get; set; }
/// <summary>
/// Implementation of Dispose according to .NET Framework Design Guidelines.
/// </summary>
/// <remarks>Do not make this method virtual.
/// A derived class should not be able to override this method.
/// </remarks>
public void Dispose()
{
Dispose( true );
// This object will be cleaned up by the Dispose method.
// Therefore, you should call GC.SupressFinalize to
// take this object off the finalization queue
// and prevent finalization code for this object
// from executing a second time.
// Always use SuppressFinalize() in case a subclass
// of this type implements a finalizer.
GC.SuppressFinalize( this );
}
/// <summary>
/// Overloaded Implementation of Dispose.
/// </summary>
/// <param name="isDisposing"></param>
/// <remarks>
/// <para><list type="bulleted">Dispose(bool isDisposing) executes in two distinct scenarios.
/// <item>If <paramref name="isDisposing"/> equals true, the method has been called directly
/// or indirectly by a user's code. Managed and unmanaged resources
/// can be disposed.</item>
/// <item>If <paramref name="isDisposing"/> equals false, the method has been called by the
/// runtime from inside the finalizer and you should not reference
/// other objects. Only unmanaged resources can be disposed.</item></list></para>
/// </remarks>
protected virtual void Dispose( bool isDisposing )
{
// TODO If you need thread safety, use a lock around these
// operations, as well as in your methods that use the resource.
try
{
if( !this.IsDisposed )
{
if( isDisposing )
{
// TODO Release all managed resources here
$end$
}
// TODO Release all unmanaged resources here
// TODO explicitly set root references to null to expressly tell the GarbageCollector
// that the resources have been disposed of and its ok to release the memory allocated for them.
}
}
finally
{
// explicitly call the base class Dispose implementation
base.Dispose( isDisposing );
this.IsDisposed = true;
}
}
//TODO Uncomment this code if this class will contain members which are UNmanaged
//
///// <summary>Finalizer for $className$</summary>
///// <remarks>This finalizer will run only if the Dispose method does not get called.
///// It gives your base class the opportunity to finalize.
///// DO NOT provide finalizers in types derived from this class.
///// All code executed within a Finalizer MUST be thread-safe!</remarks>
// ~$className$()
// {
// Dispose( false );
// }
#endregion IDisposable implementation
Here is the code for implementing IDisposable in a derived class. Note that you do not need to explicitly list inheritance from IDisposable in the definition of the derived class.
public DerivedClass : BaseClass, IDisposable (remove the IDisposable because it is inherited from BaseClass)
protected override void Dispose( bool isDisposing )
{
try
{
if ( !this.IsDisposed )
{
if ( isDisposing )
{
// Release all managed resources here
}
}
}
finally
{
// explicitly call the base class Dispose implementation
base.Dispose( isDisposing );
}
}
I've posted this implementation on my blog at: How to Properly Implement the Dispose Pattern

I agree with pm100 (and should have explicitly said this in my earlier post).
You should never implement IDisposable in a class unless you need it. To be very specific, there are about 5 times when you would ever need/should implement IDisposable:
Your class explicitly contains (i.e. not via inheritance) any managed resources which implement IDisposable and should be cleaned up once your class is no longer used. For example, if your class contains an instance of a Stream, DbCommand, DataTable, etc.
Your class explicitly contains any managed resources which implement a Close() method - e.g. IDataReader, IDbConnection, etc. Note that some of these classes do implement IDisposable by having Dispose() as well as a Close() method.
Your class explicitly contains an unmanaged resource - e.g. a COM object, pointers (yes, you can use pointers in managed C# but they must be declared in 'unsafe' blocks, etc.
In the case of unmanaged resources, you should also make sure to call System.Runtime.InteropServices.Marshal.ReleaseComObject() on the RCW. Even though the RCW is, in theory, a managed wrapper, there is still reference counting going on under the covers.
If your class subscribes to events using strong references. You need to unregister/detach yourself from the events. Always to make sure these are not null first before trying to unregister/detach them!.
Your class contains any combination of the above...
A recommended alternative to working with COM objects and having to use Marshal.ReleaseComObject() is to use the System.Runtime.InteropServices.SafeHandle class.
The BCL (Base Class Library Team) has a good blog post about it here http://blogs.msdn.com/bclteam/archive/2005/03/16/396900.aspx
One very important note to make is that if you are working with WCF and cleaning up resources, you should ALMOST ALWAYS avoid the 'using' block. There are plenty of blog posts out there and some on MSDN about why this is a bad idea. I have also posted about it here - Don't use 'using()' with a WCF proxy

Using lambdas instead of IDisposable.
I have never been thrilled with the whole using/IDisposable idea. The problem is that it requires the caller to:
know that they must use IDisposable
remember to use 'using'.
My new preferred method is to use a factory method and a lambda instead
Imagine I want to do something with a SqlConnection (something that should be wrapped in a using). Classically you would do
using (Var conn = Factory.MakeConnection())
{
conn.Query(....);
}
New way
Factory.DoWithConnection((conn)=>
{
conn.Query(...);
}
In the first case the caller could simply not use the using syntax. IN the second case the user has no choice. There is no method that creates a SqlConnection object, the caller must invoke DoWithConnection.
DoWithConnection looks like this
void DoWithConnection(Action<SqlConnection> action)
{
using (var conn = MakeConnection())
{
action(conn);
}
}
MakeConnection is now private

nobody answered the question about whether you should implement IDisposable even though you dont need it.
Short answer : No
Long answer:
This would allow a consumer of your class to use 'using'. The question I would ask is - why would they do it? Most devs will not use 'using' unless they know that they must - and how do they know. Either
its obviuos the them from experience (a socket class for example)
its documented
they are cautious and can see that the class implements IDisposable
So by implementing IDisposable you are telling devs (at least some) that this class wraps up something that must be released. They will use 'using' - but there are other cases where using is not possible (the scope of object is not local); and they will have to start worrying about the lifetime of the objects in those other cases - I would worry for sure. But this is not necessary
You implement Idisposable to enable them to use using, but they wont use using unless you tell them to.
So dont do it

Dispose pattern:
public abstract class DisposableObject : IDisposable
{
public bool Disposed { get; private set;}
public void Dispose()
{
Dispose(true);
GC.SuppressFinalize(this);
}
~DisposableObject()
{
Dispose(false);
}
private void Dispose(bool disposing)
{
if (!Disposed)
{
if (disposing)
{
DisposeManagedResources();
}
DisposeUnmanagedResources();
Disposed = true;
}
}
protected virtual void DisposeManagedResources() { }
protected virtual void DisposeUnmanagedResources() { }
}
Example of inheritance:
public class A : DisposableObject
{
public Component components_a { get; set; }
private IntPtr handle_a;
protected override void DisposeManagedResources()
{
try
{
Console.WriteLine("A_DisposeManagedResources");
components_a.Dispose();
components_a = null;
}
finally
{
base.DisposeManagedResources();
}
}
protected override void DisposeUnmanagedResources()
{
try
{
Console.WriteLine("A_DisposeUnmanagedResources");
CloseHandle(handle_a);
handle_a = IntPtr.Zero;
}
finally
{
base.DisposeUnmanagedResources();
}
}
}
public class B : A
{
public Component components_b { get; set; }
private IntPtr handle_b;
protected override void DisposeManagedResources()
{
try
{
Console.WriteLine("B_DisposeManagedResources");
components_b.Dispose();
components_b = null;
}
finally
{
base.DisposeManagedResources();
}
}
protected override void DisposeUnmanagedResources()
{
try
{
Console.WriteLine("B_DisposeUnmanagedResources");
CloseHandle(handle_b);
handle_b = IntPtr.Zero;
}
finally
{
base.DisposeUnmanagedResources();
}
}
}

If you are using other managed objects that are using unmanaged resources, it is not your responsibility to ensure those are finalized. Your responsibility is to call Dispose on those objects when Dispose is called on your object, and it stops there.
If your class doesn't use any scarce resources, I fail to see why you would make your class implement IDisposable. You should only do so if you're:
Know you will have scarce resources in your objects soon, just not now (and I mean that as in "we're still developing, it will be here before we're done", not as in "I think we'll need this")
Using scarce resources
Yes, the code that uses your code must call the Dispose method of your object. And yes, the code that uses your object can use using as you've shown.
(2 again?) It is likely that the WebClient uses either unmanaged resources, or other managed resources that implement IDisposable. The exact reason, however, is not important. What is important is that it implements IDisposable, and so it falls on you to act upon that knowledge by disposing of the object when you're done with it, even if it turns out WebClient uses no other resources at all.

Some aspects of another answer are slightly incorrect for 2 reasons:
First,
using(NoGateway objNoGateway = new NoGateway())
actually is equivalent to:
try
{
NoGateway = new NoGateway();
}
finally
{
if(NoGateway != null)
{
NoGateway.Dispose();
}
}
This may sound ridiculous since the 'new' operator should never return 'null' unless you have an OutOfMemory exception. But consider the following cases:
1. You call a FactoryClass that returns an IDisposable resource or
2. If you have a type that may or may not inherit from IDisposable depending on its implementation - remember that I've seen the IDisposable pattern implemented incorrectly many times at many clients where developers just add a Dispose() method without inheriting from IDisposable (bad, bad, bad). You could also have the case of an IDisposable resource being returned from a property or method (again bad, bad, bad - don't 'give away your IDisposable resources)
using(IDisposable objNoGateway = new NoGateway() as IDisposable)
{
if (NoGateway != null)
{
...
If the 'as' operator returns null (or property or method returning the resource), and your code in the 'using' block protects against 'null', your code will not blow up when trying to call Dispose on a null object because of the 'built-in' null check.
The second reason your reply is not accurate is because of the following stmt:
A finalizer is called upon the GC destroying your object
First, Finalization (as well as GC itself) is non-deterministic. THe CLR determines when it will call a finalizer. i.e. the developer/code has no idea. If the IDisposable pattern is implemented correctly (as I've posted above) and GC.SuppressFinalize() has been called, the the Finalizer will NOT be called. This is one of the big reasons to properly implement the pattern correctly. Since there is only 1 Finalizer thread per managed process, regardless of the number of logical processors, you can easily degrade performance by backing up or even hanging the Finalizer thread by forgetting to call GC.SuppressFinalize().
I've posted a correct implementation of the Dispose Pattern on my blog: How to Properly Implement the Dispose Pattern

1) WebClient is a managed type, so you don't need a finalizer. The finalizer is needed in the case your users don't Dispose() of your NoGateway class and the native type (which is not collected by the GC) needs to be cleaned up after. In this case, if the user doesn't call Dispose(), the contained WebClient will be disposed by the GC right after the NoGateway does.
2) Indirectly yes, but you shouldn't have to worry about it. Your code is correct as stands and you cannot prevent your users from forgetting to Dispose() very easily.

Pattern from msdn
public class BaseResource: IDisposable
{
private IntPtr handle;
private Component Components;
private bool disposed = false;
public BaseResource()
{
}
public void Dispose()
{
Dispose(true);
GC.SuppressFinalize(this);
}
protected virtual void Dispose(bool disposing)
{
if(!this.disposed)
{
if(disposing)
{
Components.Dispose();
}
CloseHandle(handle);
handle = IntPtr.Zero;
}
disposed = true;
}
~BaseResource()
{ Dispose(false);
}
public void DoSomething()
{
if(this.disposed)
{
throw new ObjectDisposedException();
}
}
}
public class MyResourceWrapper: BaseResource
{
private ManagedResource addedManaged;
private NativeResource addedNative;
private bool disposed = false;
public MyResourceWrapper()
{
}
protected override void Dispose(bool disposing)
{
if(!this.disposed)
{
try
{
if(disposing)
{
addedManaged.Dispose();
}
CloseHandle(addedNative);
this.disposed = true;
}
finally
{
base.Dispose(disposing);
}
}
}
}

using(NoGateway objNoGateway = new NoGateway())
is equivalent to
try
{
NoGateway = new NoGateway();
}
finally
{
NoGateway.Dispose();
}
A finalizer is called upon the GC destroying your object. This can be at a totally different time than when you leave your method. The Dispose of IDisposable is called immediately after you leave the using block. Hence the pattern is usually to use using to free ressources immediately after you don't need them anymore.

From what I know, it's highly recommended NOT to use the Finalizer / Destructor:
public ~MyClass() {
//dont use this
}
Mostly, this is due to not knowing when or IF it will be called. The dispose method is much better, especially if you us using or dispose directly.
using is good. use it :)

Refactoring global object that implements IDisposable [duplicate]

C# 2008
I have been working on this for a while now, and I am still confused about the use of finalize and dispose methods in code. My questions are below:
I know that we only need a finalizer while disposing unmanaged resources. However, if there are managed resources that make calls to unmanaged resources, would it still need to implement a finalizer?
However, if I develop a class that doesn't use any unmanaged resource - directly or indirectly, should I implement the IDisposable to allow the clients of that class to use the 'using statement'?
Would it be feasible to implement IDisposable just to enable clients of your class to use the using statement?
using(myClass objClass = new myClass())
{
// Do stuff here
}
I have developed this simple code below to demonstrate the Finalize/dispose use:
public class NoGateway : IDisposable
{
private WebClient wc = null;
public NoGateway()
{
wc = new WebClient();
wc.DownloadStringCompleted += wc_DownloadStringCompleted;
}
// Start the Async call to find if NoGateway is true or false
public void NoGatewayStatus()
{
// Start the Async's download
// Do other work here
wc.DownloadStringAsync(new Uri(www.xxxx.xxx));
}
private void wc_DownloadStringCompleted(object sender, DownloadStringCompletedEventArgs e)
{
// Do work here
}
// Dispose of the NoGateway object
public void Dispose()
{
wc.DownloadStringCompleted -= wc_DownloadStringCompleted;
wc.Dispose();
GC.SuppressFinalize(this);
}
}
Question about the source code:
Here I have not added the finalizer, and normally the finalizer will be called by the GC, and the finalizer will call the Dispose. As I don't have the finalizer, when do I call the Dispose method? Is it the client of the class that has to call it?
So my class in the example is called NoGateway and the client could use and dispose of the class like this:
using(NoGateway objNoGateway = new NoGateway())
{
// Do stuff here
}
Would the Dispose method be automatically called when execution reaches the end of the using block, or does the client have to manually call the dispose method? i.e.
NoGateway objNoGateway = new NoGateway();
// Do stuff with object
objNoGateway.Dispose(); // finished with it
I am using the WebClient class in my NoGateway class. Because WebClient implements the IDisposable interface, does this mean that WebClient indirectly uses unmanaged resources? Is there a hard and fast rule to follow this? How do I know that a class uses unmanaged resources?

The recommended IDisposable pattern is here. When programming a class that uses IDisposable, generally you should use two patterns:
When implementing a sealed class that doesn't use unmanaged resources, you simply implement a Dispose method as with normal interface implementations:
public sealed class A : IDisposable
{
public void Dispose()
{
// get rid of managed resources, call Dispose on member variables...
}
}
When implementing an unsealed class, do it like this:
public class B : IDisposable
{
public void Dispose()
{
Dispose(true);
GC.SuppressFinalize(this);
}
protected virtual void Dispose(bool disposing)
{
if (disposing)
{
// get rid of managed resources
}
// get rid of unmanaged resources
}
// only if you use unmanaged resources directly in B
//~B()
//{
// Dispose(false);
//}
}
Notice that I haven't declared a finalizer in B; you should only implement a finalizer if you have actual unmanaged resources to dispose. The CLR deals with finalizable objects differently to non-finalizable objects, even if SuppressFinalize is called.
So, you shouldn't declare a finalizer unless you have to, but you give inheritors of your class a hook to call your Dispose and implement a finalizer themselves if they use unmanaged resources directly:
public class C : B
{
private IntPtr m_Handle;
protected override void Dispose(bool disposing)
{
if (disposing)
{
// get rid of managed resources
}
ReleaseHandle(m_Handle);
base.Dispose(disposing);
}
~C() {
Dispose(false);
}
}
If you're not using unmanaged resources directly (SafeHandle and friends doesn't count, as they declare their own finalizers), then don't implement a finalizer, as the GC deals with finalizable classes differently, even if you later suppress the finalizer. Also note that, even though B doesn't have a finalizer, it still calls SuppressFinalize to correctly deal with any subclasses that do implement a finalizer.
When a class implements the IDisposable interface, it means that somewhere there are some unmanaged resources that should be got rid of when you've finished using the class. The actual resources are encapsulated within the classes; you don't need to explicitly delete them. Simply calling Dispose() or wrapping the class in a using(...) {} will make sure any unmanaged resources are got rid of as necessary.

The official pattern to implement IDisposable is hard to understand. I believe this one is better:
public class BetterDisposableClass : IDisposable {
public void Dispose() {
CleanUpManagedResources();
CleanUpNativeResources();
GC.SuppressFinalize(this);
}
protected virtual void CleanUpManagedResources() {
// ...
}
protected virtual void CleanUpNativeResources() {
// ...
}
~BetterDisposableClass() {
CleanUpNativeResources();
}
}
An even better solution is to have a rule that you always have to create a wrapper class for any unmanaged resource that you need to handle:
public class NativeDisposable : IDisposable {
public void Dispose() {
CleanUpNativeResource();
GC.SuppressFinalize(this);
}
protected virtual void CleanUpNativeResource() {
// ...
}
~NativeDisposable() {
CleanUpNativeResource();
}
}
With SafeHandle and its derivatives, these classes should be very rare.
The result for disposable classes that don't deal directly with unmanaged resources, even in the presence of inheritance, is powerful: they don't need to be concerned with unmanaged resources anymore. They'll be simple to implement and to understand:
public class ManagedDisposable : IDisposable {
public virtual void Dispose() {
// dispose of managed resources
}
}

Note that any IDisposable implementation should follow the below pattern (IMHO). I developed this pattern based on info from several excellent .NET "gods" the .NET Framework Design Guidelines (note that MSDN does not follow this for some reason!). The .NET Framework Design Guidelines were written by Krzysztof Cwalina (CLR Architect at the time) and Brad Abrams (I believe the CLR Program Manager at the time) and Bill Wagner ([Effective C#] and [More Effective C#] (just take a look for these on Amazon.com:
Note that you should NEVER implement a Finalizer unless your class directly contains (not inherits) UNmanaged resources. Once you implement a Finalizer in a class, even if it is never called, it is guaranteed to live for an extra collection. It is automatically placed on the Finalization Queue (which runs on a single thread). Also, one very important note...all code executed within a Finalizer (should you need to implement one) MUST be thread-safe AND exception-safe! BAD things will happen otherwise...(i.e. undetermined behavior and in the case of an exception, a fatal unrecoverable application crash).
The pattern I've put together (and written a code snippet for) follows:
#region IDisposable implementation
//TODO remember to make this class inherit from IDisposable -> $className$ : IDisposable
// Default initialization for a bool is 'false'
private bool IsDisposed { get; set; }
/// <summary>
/// Implementation of Dispose according to .NET Framework Design Guidelines.
/// </summary>
/// <remarks>Do not make this method virtual.
/// A derived class should not be able to override this method.
/// </remarks>
public void Dispose()
{
Dispose( true );
// This object will be cleaned up by the Dispose method.
// Therefore, you should call GC.SupressFinalize to
// take this object off the finalization queue
// and prevent finalization code for this object
// from executing a second time.
// Always use SuppressFinalize() in case a subclass
// of this type implements a finalizer.
GC.SuppressFinalize( this );
}
/// <summary>
/// Overloaded Implementation of Dispose.
/// </summary>
/// <param name="isDisposing"></param>
/// <remarks>
/// <para><list type="bulleted">Dispose(bool isDisposing) executes in two distinct scenarios.
/// <item>If <paramref name="isDisposing"/> equals true, the method has been called directly
/// or indirectly by a user's code. Managed and unmanaged resources
/// can be disposed.</item>
/// <item>If <paramref name="isDisposing"/> equals false, the method has been called by the
/// runtime from inside the finalizer and you should not reference
/// other objects. Only unmanaged resources can be disposed.</item></list></para>
/// </remarks>
protected virtual void Dispose( bool isDisposing )
{
// TODO If you need thread safety, use a lock around these
// operations, as well as in your methods that use the resource.
try
{
if( !this.IsDisposed )
{
if( isDisposing )
{
// TODO Release all managed resources here
$end$
}
// TODO Release all unmanaged resources here
// TODO explicitly set root references to null to expressly tell the GarbageCollector
// that the resources have been disposed of and its ok to release the memory allocated for them.
}
}
finally
{
// explicitly call the base class Dispose implementation
base.Dispose( isDisposing );
this.IsDisposed = true;
}
}
//TODO Uncomment this code if this class will contain members which are UNmanaged
//
///// <summary>Finalizer for $className$</summary>
///// <remarks>This finalizer will run only if the Dispose method does not get called.
///// It gives your base class the opportunity to finalize.
///// DO NOT provide finalizers in types derived from this class.
///// All code executed within a Finalizer MUST be thread-safe!</remarks>
// ~$className$()
// {
// Dispose( false );
// }
#endregion IDisposable implementation
Here is the code for implementing IDisposable in a derived class. Note that you do not need to explicitly list inheritance from IDisposable in the definition of the derived class.
public DerivedClass : BaseClass, IDisposable (remove the IDisposable because it is inherited from BaseClass)
protected override void Dispose( bool isDisposing )
{
try
{
if ( !this.IsDisposed )
{
if ( isDisposing )
{
// Release all managed resources here
}
}
}
finally
{
// explicitly call the base class Dispose implementation
base.Dispose( isDisposing );
}
}
I've posted this implementation on my blog at: How to Properly Implement the Dispose Pattern

I agree with pm100 (and should have explicitly said this in my earlier post).
You should never implement IDisposable in a class unless you need it. To be very specific, there are about 5 times when you would ever need/should implement IDisposable:
Your class explicitly contains (i.e. not via inheritance) any managed resources which implement IDisposable and should be cleaned up once your class is no longer used. For example, if your class contains an instance of a Stream, DbCommand, DataTable, etc.
Your class explicitly contains any managed resources which implement a Close() method - e.g. IDataReader, IDbConnection, etc. Note that some of these classes do implement IDisposable by having Dispose() as well as a Close() method.
Your class explicitly contains an unmanaged resource - e.g. a COM object, pointers (yes, you can use pointers in managed C# but they must be declared in 'unsafe' blocks, etc.
In the case of unmanaged resources, you should also make sure to call System.Runtime.InteropServices.Marshal.ReleaseComObject() on the RCW. Even though the RCW is, in theory, a managed wrapper, there is still reference counting going on under the covers.
If your class subscribes to events using strong references. You need to unregister/detach yourself from the events. Always to make sure these are not null first before trying to unregister/detach them!.
Your class contains any combination of the above...
A recommended alternative to working with COM objects and having to use Marshal.ReleaseComObject() is to use the System.Runtime.InteropServices.SafeHandle class.
The BCL (Base Class Library Team) has a good blog post about it here http://blogs.msdn.com/bclteam/archive/2005/03/16/396900.aspx
One very important note to make is that if you are working with WCF and cleaning up resources, you should ALMOST ALWAYS avoid the 'using' block. There are plenty of blog posts out there and some on MSDN about why this is a bad idea. I have also posted about it here - Don't use 'using()' with a WCF proxy

Using lambdas instead of IDisposable.
I have never been thrilled with the whole using/IDisposable idea. The problem is that it requires the caller to:
know that they must use IDisposable
remember to use 'using'.
My new preferred method is to use a factory method and a lambda instead
Imagine I want to do something with a SqlConnection (something that should be wrapped in a using). Classically you would do
using (Var conn = Factory.MakeConnection())
{
conn.Query(....);
}
New way
Factory.DoWithConnection((conn)=>
{
conn.Query(...);
}
In the first case the caller could simply not use the using syntax. IN the second case the user has no choice. There is no method that creates a SqlConnection object, the caller must invoke DoWithConnection.
DoWithConnection looks like this
void DoWithConnection(Action<SqlConnection> action)
{
using (var conn = MakeConnection())
{
action(conn);
}
}
MakeConnection is now private

nobody answered the question about whether you should implement IDisposable even though you dont need it.
Short answer : No
Long answer:
This would allow a consumer of your class to use 'using'. The question I would ask is - why would they do it? Most devs will not use 'using' unless they know that they must - and how do they know. Either
its obviuos the them from experience (a socket class for example)
its documented
they are cautious and can see that the class implements IDisposable
So by implementing IDisposable you are telling devs (at least some) that this class wraps up something that must be released. They will use 'using' - but there are other cases where using is not possible (the scope of object is not local); and they will have to start worrying about the lifetime of the objects in those other cases - I would worry for sure. But this is not necessary
You implement Idisposable to enable them to use using, but they wont use using unless you tell them to.
So dont do it

Dispose pattern:
public abstract class DisposableObject : IDisposable
{
public bool Disposed { get; private set;}
public void Dispose()
{
Dispose(true);
GC.SuppressFinalize(this);
}
~DisposableObject()
{
Dispose(false);
}
private void Dispose(bool disposing)
{
if (!Disposed)
{
if (disposing)
{
DisposeManagedResources();
}
DisposeUnmanagedResources();
Disposed = true;
}
}
protected virtual void DisposeManagedResources() { }
protected virtual void DisposeUnmanagedResources() { }
}
Example of inheritance:
public class A : DisposableObject
{
public Component components_a { get; set; }
private IntPtr handle_a;
protected override void DisposeManagedResources()
{
try
{
Console.WriteLine("A_DisposeManagedResources");
components_a.Dispose();
components_a = null;
}
finally
{
base.DisposeManagedResources();
}
}
protected override void DisposeUnmanagedResources()
{
try
{
Console.WriteLine("A_DisposeUnmanagedResources");
CloseHandle(handle_a);
handle_a = IntPtr.Zero;
}
finally
{
base.DisposeUnmanagedResources();
}
}
}
public class B : A
{
public Component components_b { get; set; }
private IntPtr handle_b;
protected override void DisposeManagedResources()
{
try
{
Console.WriteLine("B_DisposeManagedResources");
components_b.Dispose();
components_b = null;
}
finally
{
base.DisposeManagedResources();
}
}
protected override void DisposeUnmanagedResources()
{
try
{
Console.WriteLine("B_DisposeUnmanagedResources");
CloseHandle(handle_b);
handle_b = IntPtr.Zero;
}
finally
{
base.DisposeUnmanagedResources();
}
}
}

If you are using other managed objects that are using unmanaged resources, it is not your responsibility to ensure those are finalized. Your responsibility is to call Dispose on those objects when Dispose is called on your object, and it stops there.
If your class doesn't use any scarce resources, I fail to see why you would make your class implement IDisposable. You should only do so if you're:
Know you will have scarce resources in your objects soon, just not now (and I mean that as in "we're still developing, it will be here before we're done", not as in "I think we'll need this")
Using scarce resources
Yes, the code that uses your code must call the Dispose method of your object. And yes, the code that uses your object can use using as you've shown.
(2 again?) It is likely that the WebClient uses either unmanaged resources, or other managed resources that implement IDisposable. The exact reason, however, is not important. What is important is that it implements IDisposable, and so it falls on you to act upon that knowledge by disposing of the object when you're done with it, even if it turns out WebClient uses no other resources at all.

Some aspects of another answer are slightly incorrect for 2 reasons:
First,
using(NoGateway objNoGateway = new NoGateway())
actually is equivalent to:
try
{
NoGateway = new NoGateway();
}
finally
{
if(NoGateway != null)
{
NoGateway.Dispose();
}
}
This may sound ridiculous since the 'new' operator should never return 'null' unless you have an OutOfMemory exception. But consider the following cases:
1. You call a FactoryClass that returns an IDisposable resource or
2. If you have a type that may or may not inherit from IDisposable depending on its implementation - remember that I've seen the IDisposable pattern implemented incorrectly many times at many clients where developers just add a Dispose() method without inheriting from IDisposable (bad, bad, bad). You could also have the case of an IDisposable resource being returned from a property or method (again bad, bad, bad - don't 'give away your IDisposable resources)
using(IDisposable objNoGateway = new NoGateway() as IDisposable)
{
if (NoGateway != null)
{
...
If the 'as' operator returns null (or property or method returning the resource), and your code in the 'using' block protects against 'null', your code will not blow up when trying to call Dispose on a null object because of the 'built-in' null check.
The second reason your reply is not accurate is because of the following stmt:
A finalizer is called upon the GC destroying your object
First, Finalization (as well as GC itself) is non-deterministic. THe CLR determines when it will call a finalizer. i.e. the developer/code has no idea. If the IDisposable pattern is implemented correctly (as I've posted above) and GC.SuppressFinalize() has been called, the the Finalizer will NOT be called. This is one of the big reasons to properly implement the pattern correctly. Since there is only 1 Finalizer thread per managed process, regardless of the number of logical processors, you can easily degrade performance by backing up or even hanging the Finalizer thread by forgetting to call GC.SuppressFinalize().
I've posted a correct implementation of the Dispose Pattern on my blog: How to Properly Implement the Dispose Pattern

1) WebClient is a managed type, so you don't need a finalizer. The finalizer is needed in the case your users don't Dispose() of your NoGateway class and the native type (which is not collected by the GC) needs to be cleaned up after. In this case, if the user doesn't call Dispose(), the contained WebClient will be disposed by the GC right after the NoGateway does.
2) Indirectly yes, but you shouldn't have to worry about it. Your code is correct as stands and you cannot prevent your users from forgetting to Dispose() very easily.

Pattern from msdn
public class BaseResource: IDisposable
{
private IntPtr handle;
private Component Components;
private bool disposed = false;
public BaseResource()
{
}
public void Dispose()
{
Dispose(true);
GC.SuppressFinalize(this);
}
protected virtual void Dispose(bool disposing)
{
if(!this.disposed)
{
if(disposing)
{
Components.Dispose();
}
CloseHandle(handle);
handle = IntPtr.Zero;
}
disposed = true;
}
~BaseResource()
{ Dispose(false);
}
public void DoSomething()
{
if(this.disposed)
{
throw new ObjectDisposedException();
}
}
}
public class MyResourceWrapper: BaseResource
{
private ManagedResource addedManaged;
private NativeResource addedNative;
private bool disposed = false;
public MyResourceWrapper()
{
}
protected override void Dispose(bool disposing)
{
if(!this.disposed)
{
try
{
if(disposing)
{
addedManaged.Dispose();
}
CloseHandle(addedNative);
this.disposed = true;
}
finally
{
base.Dispose(disposing);
}
}
}
}

using(NoGateway objNoGateway = new NoGateway())
is equivalent to
try
{
NoGateway = new NoGateway();
}
finally
{
NoGateway.Dispose();
}
A finalizer is called upon the GC destroying your object. This can be at a totally different time than when you leave your method. The Dispose of IDisposable is called immediately after you leave the using block. Hence the pattern is usually to use using to free ressources immediately after you don't need them anymore.

From what I know, it's highly recommended NOT to use the Finalizer / Destructor:
public ~MyClass() {
//dont use this
}
Mostly, this is due to not knowing when or IF it will be called. The dispose method is much better, especially if you us using or dispose directly.
using is good. use it :)

Destructor never gets called [duplicate]

This question already has answers here:
Why does my destructor never run?
(6 answers)
Closed 9 years ago.
I have a class Class that creates a Thread in it's constructor. This thread runs a while(true) loop that is reading non-critical data from a NetStream. The thread will be aborted by the destructor:
~Class()
{
_thread.Abort();
_thread = null;
}
When the program wants to end the use of Class's instance - ClassInstance, it calls:
ClassInstance = null;
GC.Collect;
I thought that means that ~Class() will be caller automatically at that point - but it's not.
This thread keeps running even after Application.Exit() and returning from Main().

The crucial bit of your code is not included; how the thread is started and what method it is running. If I had to make a guess I would say it is likely you started the thread by passing an instance method of Class. So basically your class instance is still rooted by the running of the thread. You attempt to stop the thread in the finalizer, but the finalizer will never run because the instance is still rooted leading to a catch-22 situation.
Also, you mentioned that the thread is running non-critical code and that was your justification for using Thread.Abort. That really is not a good enough reason. It is very hard to control where that ThreadAbortException will get injected into the thread and as a result it may corrupt critical program data structures you did not anticipate.
Use the new cooperative cancellation mechanisms included with the TPL. Change the while (true) loop to poll a CancellationToken instead. Signal the cancellation in the Dispose method when you implement IDisposable. Do not include a finalizer (destructor in C# terminology). Finalizers are intended to be used to clean up unmanaged resources. Since you have not indicated that unmanaged resources are in play then it is pointless to have a finalizer. You do not have to include a finalizer when implementing IDisposable. In fact, it is considered bad practice to have one when it is not really needed.
public class Class : IDisposable
{
private Task task;
private CancellationTokenSource cts = new CancellationTokenSource();
Class()
{
task = new Task(Run, cts.Token, TaskCreationOptions.LongRunning);
task.Start();
}
public void Dispose()
{
cts.Cancel();
}
private void Run()
{
while (!cts.Token.IsCancellationRequested)
{
// Your stuff goes here.
}
}
}

If you implement IDisposable, and dispose the object, then the code in Dispose will run, but there is no guarantee that Destructor will also be called.
Garbage Collector forms an opinion that it is a waste of time. So if you want to have a predictable dispose you can use IDisposable.
Check this Thread

Slightly off-topic: You can use Tasks instead of naked threads to run functions without worrying about disposal.
There are multiple issues here:
Setting the variable to null doesn't delete anything, it simply removes a reference to your instance.
The destructor will only get called when the garbage collector decides to collect your instance. The garbage collector runs infrequently, typically only when it detects that there is memory pressure.
The garbage collector collects ONLY orphaned collections. Orphaned means that any references pointed to by your object are invalid.
You should implement the IDisposable interface and call any cleanup code in the Dispose method. C# and VB offer the using keyword to make disposal easier even in the face of exception.
A typical IDisposable implementation is similar to the following:
class MyClass:IDisposable
{
ClassB _otherClass;
...
~MyClass()
{
//Call Dispose from constructor
Dispose(false);
}
public void Dispose()
{
//Call Dispose Explicitly
Dispose(true);
//Tell the GC not call our destructor, we already cleaned the object ourselves
GC.SuppressFinalize(this);
}
protected virtual Dispose(bool disposing)
{
if (disposing)
{
//Clean up MANAGED resources here. These are guaranteed to be INvalid if
//Dispose gets called by the constructor
//Clean this if it is an IDisposable
_otherClass.Dispose();
//Make sure to release our reference
_otherClass=null;
}
//Clean UNMANAGED resources here
}
}
You can then use your class like this :
using(var myClass=new MyClass())
{
...
}
Once the using block terminates, Dispose() will be called even if an exception occurs.

CLR maintains all the running threads. You will have passed the InstanceMethod of your class to the thread's constructor as either ThreadStart or ParameterizedThreadStart delegate. Delegate will hold the MethodInfo of the method you passed and the Instance of your class in Target Property.
Garbage collector collects and object which should not have any Strong References but your instance is still alive inside Delegate of Thread. So your class is still having the Strong Reference hence it is not eligible for garbage collection.
To prove what I stated above
public class Program
{
[STAThread]
static void Main(string[] args)
{
GcTest();
Console.Read();
}
private static void GcTest()
{
Class cls = new Class();
Thread.Sleep(10);
cls = null;
GC.Collect();
GC.WaitForPendingFinalizers();
}
}
public class Class
{
private Thread _thread;
~Class()
{
Console.WriteLine("~Class");
_thread.Abort();
_thread = null;
}
public Class()
{
_thread = new Thread(ThreadProc);
_thread.Start();
}
private void ThreadProc()
{
while (true)
{
Thread.Sleep(10);
}
}
}
}
Try the above code. Destructor Will not be called. To make it work mark the ThreadProc method as static and run again Destructor will be called

Should Dispose() or Finalize() be used to delete temporary files?

I have a class that makes use of temporary files (Path.GetTempFileName()) while it is active. I want to make sure these files do not remain on the user's hard drive taking up space after my program is closed. Right now my class has a Close() method which checks if any temporary files used by the class still exist and deletes them.
Would it make more sense to put this code in the Dispose() or Finalize() methods instead?

Better yet would be to create the file with FileOptions.DeleteOnClose. This will ensure that the operating system forcibly deletes the file when your process exits (even in the case of a rude abort). Of course, you will still want to close/delete the file yourself when you are done with it, but this provides a nice backstop to ensure that you don't allow the files to be sit around forever
Example:
using (FileStream fs = File.Create(Path.GetTempFileName(), Int16.MaxValue,
FileOptions.DeleteOnClose))
{
// Use temp file
} // The file will be deleted here

I would do both; make the class disposable, and have the finalizer clean it up. There is a standard pattern for doing so safely and effectively: use it rather than attempting to deduce for yourself what the right pattern is. It is very easy to get wrong. Read this carefully:
http://msdn.microsoft.com/en-us/library/system.idisposable.aspx
Note that you've got to be really really careful when writing a finalizer. When the finalizer runs, many of your normal assumptions are wrong:
There are all kinds of potentials for race conditions or deadlocks because you are no longer on the main thread, you're on the finalizer thread.
In regular code, if you're running code inside an object then you know that all the things the object refers to are alive. In a finalizer, all the things the object refers to might have just been finalized! Finalizers of dead objects can run in any order, including "child" objects being finalized before "parent" objects.
In regular code, assigning a reference to an object to a static field could be perfectly sensible. In a finalizer, the reference you are assigning could be to an already dead object, and therefore the assignment brings a dead object back to life. (Because objects referred to by static fields are always alive.) That is an exceedingly weird state to be in and nothing pleasant happens if you do.
And so on. Be careful. You are expected to fully understand the operation of the garbage collector if you write a non-trivial finalizer.

A file is an unmanaged resource, and you implement IDisposable to clean up unmanaged resources that your classes are dependent upon.
I have implemented similar classes, although never in production code.
However, I understand your tentativeness about this - user interaction with the files outside of your application could screw things up and cause problems during disposal. However, that is the same for any file created/deleted by an application, regardless of whether or not it's tidied up by a Dispose() method or not.
I'd have to say that implementing IDisposable would be a reasonable choice.

A nice way is suggested by David M. Kean on the MSDN entry on Path.GetTempFileName. He creates a wrapper class implementing IDisposable that will automatically remove the file:
public class TemporaryFile : IDisposable
{
private bool _isDisposed;
public bool Keep { get; set; }
public string Path { get; private set; }
public TemporaryFile() : this(false)
{
}
public TemporaryFile(bool shortLived)
{
this.Path = CreateTemporaryFile(shortLived);
}
~TemporaryFile()
{
Dispose(false);
}
public void Dispose()
{
Dispose(false);
GC.SuppressFinalize(this);
}
protected virtual void Dispose(bool disposing)
{
if (!_isDisposed)
{
_isDisposed = true;
if (!this.Keep)
{
TryDelete();
}
}
}
private void TryDelete()
{
try
{
File.Delete(this.Path);
}
catch (IOException)
{
}
catch (UnauthorizedAccessException)
{
}
}
public static string CreateTemporaryFile(bool shortLived)
{
string temporaryFile = System.IO.Path.GetTempFileName();
if (shortLived)
{
// Set the temporary attribute, meaning the file will live
// in memory and will not be written to disk
//
File.SetAttributes(temporaryFile,
File.GetAttributes(temporaryFile) | FileAttributes.Temporary);
}
return temporaryFile;
}
}
Using the new class is easy, just type the following:
using (TemporaryFile temporaryFile = new TemporaryFile())
{
// Use temporary file
}
If you decide, after constructing a TemporaryFile, that you want to prevent it from being deleted, simply set the TemporaryFile.Keep property to true:
using (TemporaryFile temporaryFile = new TemporaryFile())
{
temporaryFile.Keep = true;
}

Absolutely. This way you can ensure cleanup with exceptions present.

You should definitely use Dispose to clean up resources, but make sure you implement the IDisposable interface. You don't want to just add a method named Dispose.

I always make my classes that point to temp files IDisposable, and usually implement a finalizer that calls my dispose method there as well. This seems to be the paradigm suggested by the IDisposable MSDN page.
Related code below:
public void Dispose()
{
Dispose(true);
// This object will be cleaned up by the Dispose method.
// Therefore, you should call GC.SupressFinalize to
// take this object off the finalization queue
// and prevent finalization code for this object
// from executing a second time.
GC.SuppressFinalize(this);
}
// Dispose(bool disposing) executes in two distinct scenarios.
// If disposing equals true, the method has been called directly
// or indirectly by a user's code. Managed and unmanaged resources
// can be disposed.
// If disposing equals false, the method has been called by the
// runtime from inside the finalizer and you should not reference
// other objects. Only unmanaged resources can be disposed.
private void Dispose(bool disposing)
{
// Check to see if Dispose has already been called.
if(!this.disposed)
{
// If disposing equals true, dispose all managed
// and unmanaged resources.
if(disposing)
{
// Dispose managed resources.
}
// Call the appropriate methods to clean up
// unmanaged resources here.
// If disposing is false,
// only the following code is executed.
// Note disposing has been done.
disposed = true;
}
}
// Use C# destructor syntax for finalization code.
// This destructor will run only if the Dispose method
// does not get called.
// It gives your base class the opportunity to finalize.
// Do not provide destructors in types derived from this class.
~MyResource()
{
// Do not re-create Dispose clean-up code here.
// Calling Dispose(false) is optimal in terms of
// readability and maintainability.
Dispose(false);
}

If you wish to re-use your temporary files e.g. open\close\read\write\etc, then clearing them up at the AppDomain unload level can be useful.
This can be used in combination with putting temp files in a well known sub-directory of a temp location and making sure that the directory is deleted on application startup to ensure unclean shut-downs are taken care of.
A basic example of the technique (with exception handling removed around delete for brevity). I use this technique in file-based unit tests where it makes sense and is useful.
public static class TempFileManager
{
private static readonly List<FileInfo> TempFiles = new List<FileInfo>();
private static readonly object SyncObj = new object();
static TempFileManager()
{
AppDomain.CurrentDomain.DomainUnload += CurrentDomainDomainUnload;
}
private static void CurrentDomainDomainUnload(object sender, EventArgs e)
{
TempFiles.FindAll(file => File.Exists(file.FullName)).ForEach(file => file.Delete());
}
public static FileInfo CreateTempFile(bool autoDelete)
{
FileInfo tempFile = new FileInfo(Path.GetTempFileName());
if (autoDelete)
{
lock (SyncObj)
{
TempFiles.Add(tempFile);
}
}
return tempFile;
}
}

Should I use IDisposable for purely managed resources?

Here is the scenario:
I have an object called a Transaction that needs to make sure that only one entity has permission to edit it at any given time.
In order to facilitate a long-lived lock, I have the class generating a token object that can be used to make the edits.
You would use it like this:
var transaction = new Transaction();
using (var tlock = transaction.Lock())
{
transaction.Update(data, tlock);
}
Now, I want the TransactionLock class to implement IDisposable so that its usage can be clear. But, I don't have any unmanaged resources to dispose. however, the TransctionLock object itself is a sort of "unmanaged resource" in the sense that the CLR doesn't know how to properly finalize it.
All of this would be fine and dandy, I would just use IDisposable and be done with it.
However, my issue comes when I try to do this in the finalizer:
~TransactionLock()
{
this.Dispose(false);
}
I want the finalizer to release the transaction from the lock, if possible. How, in the finalizer, do I detect if the parent transaction (this.transaction) has already been finalized?
Is there a better pattern I should be using?
Also, the Transaction class itself needn't be disposable, because it doesn't maintain a reference to the lock, and doesn't care whether or not it is unlocked when it goes to the grave.
The Transaction class looks something like this:
public sealed class Transaction
{
private readonly object lockMutex = new object();
private TransactionLock currentLock;
public TransactionLock Lock()
{
lock (this.lockMutex)
{
if (this.currentLock != null)
throw new InvalidOperationException(/* ... */);
this.currentLock = new TransactionLock(this);
return this.currentLock;
}
}
public void Update(object data, TransactionLock tlock)
{
lock (this.lockMutex)
{
this.ValidateLock(tlock);
// ...
}
}
internal void ValidateLock(TransactionLock tlock)
{
if (this.currentLock == null)
throw new InvalidOperationException(/* ... */);
if (this.currentLock != tlock)
throw new InvalidOperationException(/* ... */);
}
internal void Unlock(TransactionLock tlock)
{
lock (this.lockMutex)
{
this.ValidateLock(tlock);
this.currentLock = null;
}
}
}
And the Dispose(bool) code for the TransactionLock:
private void Dispose(bool disposing)
{
if (disposing)
{
if (this.Transaction != null)
{
this.Transaction.Unlock(this);
this.Transaction = null;
}
}
}

This was discussed before. Your case is much easier though, you are also implementing the finalizer. That's fundamentally wrong, you are hiding a bug in the client code. Beware that finalizers run on a separate thread. Debugging a consistent deadlock is much easier than dealing with locks that disappear randomly and asynchronously.
Recommendation: follow the .NET framework lead: don't help too much. Microsoft abandoned the Synchronized method for the same reason.

How, in the finalizer, do I detect if
the parent transaction
(this.transaction) has already been
finalized?
This is possible by keeping a _disposed boolean field in Transaction and exposing it through an IsDisposed read-only property. This is standard practice.
~TransactionLock()
{
this.Dispose(false);
}
Is there a better pattern I should be
using?
If it is correct that TransactionLock has no unmanaged resources then just omit the destructor (finalizer). It has no function but it does have a considerable cost.
Edit: If I read correctly, Unlock does not cut the link from TransactionLock to TTransaction, meaning that an old locks Dispose(bool) will be called though the destructor. It's not clear if that is safe.
The question would be a bit more complete with the code of TransactionLock.Dispose(bool)
Also, the Transaction class itself
needn't be disposable, because it
doesn't maintain a reference to the
lock, and doesn't care whether or not
it is unlocked when it goes to the
grave.
From this it follows that when a TransactionLock is collected, it could only be holding a ref to a Transaction that is also being collected. No need to interfere with destructors here, that would not solve anything and could only create problems you don't need.