Hi I have a text file with table schema and data when user checks not schema required then i need to delete schema and leave the data . I am using StreamReader to read the file and checking one condition and it should delete all the lines in the file till it satisfies my condition .
Let say if i am checking
using (StreamReader tsr = new StreamReader(targetFilePath))
{
do
{
string textLine = tsr.ReadLine() + "\r\n";
{
if (textLine.StartsWith("INSERT INTO"))
{
// It should leave these lines
// and no need to delete lines
}
else
{
// it should delete the lines
}
}
}
while (tsr.Peek() != -1);
tsr.Close();
Please suggest me how to delete lines and note if textline finds "InsertInto" it should not delete any content from there .
Use a second file where to put only required lines, and, at the end of the process, remove original file and rename new one to target file.
using (StreamReader tsr = new StreamReader(targetFilePath))
{
using (StreamWriter tsw = File.CreateText(targetFilePath+"_temp"))
{
string currentLine;
while((currentLine = tsr.ReadLine()) != null)
{
if(currentLine.StartsWith("A long time ago, in a far far away galaxy ..."))
{
tsw.WriteLine(currentLine);
}
}
}
}
File.Delete(targetFilePath);
File.Move(targetFilePath+"_temp",targetFilePath);
You could use Linq:
File.WriteAllLines(targetFilePath, File.ReadAllLines(targetFilePath).Where(x => x.StartsWith("INSERT INTO")));
You read in the file just the same way you were doing. However, if the line doesn't contain what you are looking for, you simply skip it. In the end, whatever data you are left over with you then write to a new text file.
private void button1_Click(object sender, EventArgs e)
{
StringBuilder newText = new StringBuilder();
using (StreamReader tsr = new StreamReader(targetFilePath))
{
do
{
string textLine = tsr.ReadLine() + "\r\n";
{
if (textLine.StartsWith("INSERT INTO"))
{
newText.Append(textLine + Environment.NewLine);
}
}
}
while (tsr.Peek() != -1);
tsr.Close();
}
System.IO.TextWriter w = new System.IO.StreamWriter(#"C:\newFile.txt");
w.Write(newText.ToString());
w.Flush();
w.Close();
}
Related
I have two text files, Source.txt and Target.txt. The source will never be modified and contain N lines of text. So, I want to delete a specific line of text in Target.txt, and replace by an specific line of text from Source.txt, I know what number of line I need, actually is the line number 2, both files.
I haven something like this:
string line = string.Empty;
int line_number = 1;
int line_to_edit = 2;
using StreamReader reader = new StreamReader(#"C:\target.xml");
using StreamWriter writer = new StreamWriter(#"C:\target.xml");
while ((line = reader.ReadLine()) != null)
{
if (line_number == line_to_edit)
writer.WriteLine(line);
line_number++;
}
But when I open the Writer, the target file get erased, it writes the lines, but, when opened, the target file only contains the copied lines, the rest get lost.
What can I do?
the easiest way is :
static void lineChanger(string newText, string fileName, int line_to_edit)
{
string[] arrLine = File.ReadAllLines(fileName);
arrLine[line_to_edit - 1] = newText;
File.WriteAllLines(fileName, arrLine);
}
usage :
lineChanger("new content for this line" , "sample.text" , 34);
You can't rewrite a line without rewriting the entire file (unless the lines happen to be the same length). If your files are small then reading the entire target file into memory and then writing it out again might make sense. You can do that like this:
using System;
using System.IO;
class Program
{
static void Main(string[] args)
{
int line_to_edit = 2; // Warning: 1-based indexing!
string sourceFile = "source.txt";
string destinationFile = "target.txt";
// Read the appropriate line from the file.
string lineToWrite = null;
using (StreamReader reader = new StreamReader(sourceFile))
{
for (int i = 1; i <= line_to_edit; ++i)
lineToWrite = reader.ReadLine();
}
if (lineToWrite == null)
throw new InvalidDataException("Line does not exist in " + sourceFile);
// Read the old file.
string[] lines = File.ReadAllLines(destinationFile);
// Write the new file over the old file.
using (StreamWriter writer = new StreamWriter(destinationFile))
{
for (int currentLine = 1; currentLine <= lines.Length; ++currentLine)
{
if (currentLine == line_to_edit)
{
writer.WriteLine(lineToWrite);
}
else
{
writer.WriteLine(lines[currentLine - 1]);
}
}
}
}
}
If your files are large it would be better to create a new file so that you can read streaming from one file while you write to the other. This means that you don't need to have the whole file in memory at once. You can do that like this:
using System;
using System.IO;
class Program
{
static void Main(string[] args)
{
int line_to_edit = 2;
string sourceFile = "source.txt";
string destinationFile = "target.txt";
string tempFile = "target2.txt";
// Read the appropriate line from the file.
string lineToWrite = null;
using (StreamReader reader = new StreamReader(sourceFile))
{
for (int i = 1; i <= line_to_edit; ++i)
lineToWrite = reader.ReadLine();
}
if (lineToWrite == null)
throw new InvalidDataException("Line does not exist in " + sourceFile);
// Read from the target file and write to a new file.
int line_number = 1;
string line = null;
using (StreamReader reader = new StreamReader(destinationFile))
using (StreamWriter writer = new StreamWriter(tempFile))
{
while ((line = reader.ReadLine()) != null)
{
if (line_number == line_to_edit)
{
writer.WriteLine(lineToWrite);
}
else
{
writer.WriteLine(line);
}
line_number++;
}
}
// TODO: Delete the old file and replace it with the new file here.
}
}
You can afterwards move the file once you are sure that the write operation has succeeded (no excecption was thrown and the writer is closed).
Note that in both cases it is a bit confusing that you are using 1-based indexing for your line numbers. It might make more sense in your code to use 0-based indexing. You can have 1-based index in your user interface to your program if you wish, but convert it to a 0-indexed before sending it further.
Also, a disadvantage of directly overwriting the old file with the new file is that if it fails halfway through then you might permanently lose whatever data wasn't written. By writing to a third file first you only delete the original data after you are sure that you have another (corrected) copy of it, so you can recover the data if the computer crashes halfway through.
A final remark: I noticed that your files had an xml extension. You might want to consider if it makes more sense for you to use an XML parser to modify the contents of the files instead of replacing specific lines.
When you create a StreamWriter it always create a file from scratch, you will have to create a third file and copy from target and replace what you need, and then replace the old one.
But as I can see what you need is XML manipulation, you might want to use XmlDocument and modify your file using Xpath.
You need to Open the output file for write access rather than using a new StreamReader, which always overwrites the output file.
StreamWriter stm = null;
fi = new FileInfo(#"C:\target.xml");
if (fi.Exists)
stm = fi.OpenWrite();
Of course, you will still have to seek to the correct line in the output file, which will be hard since you can't read from it, so unless you already KNOW the byte offset to seek to, you probably really want read/write access.
FileStream stm = fi.Open(FileMode.OpenOrCreate, FileAccess.ReadWrite, FileShare.None);
with this stream, you can read until you get to the point where you want to make changes, then write. Keep in mind that you are writing bytes, not lines, so to overwrite a line you will need to write the same number of characters as the line you want to change.
I guess the below should work (instead of the writer part from your example). I'm unfortunately with no build environment so It's from memory but I hope it helps
using (var fs = File.Open(filePath, FileMode.Open, FileAccess.ReadWrite)))
{
var destinationReader = StreamReader(fs);
var writer = StreamWriter(fs);
while ((line = reader.ReadLine()) != null)
{
if (line_number == line_to_edit)
{
writer.WriteLine(lineToWrite);
}
else
{
destinationReader .ReadLine();
}
line_number++;
}
}
The solution works fine. But I need to change single-line text when the same text is in multiple places. For this, need to define a trackText to start finding after that text and finally change oldText with newText.
private int FindLineNumber(string fileName, string trackText, string oldText, string newText)
{
int lineNumber = 0;
string[] textLine = System.IO.File.ReadAllLines(fileName);
for (int i = 0; i< textLine.Length;i++)
{
if (textLine[i].Contains(trackText)) //start finding matching text after.
traced = true;
if (traced)
if (textLine[i].Contains(oldText)) // Match text
{
textLine[i] = newText; // replace text with new one.
traced = false;
System.IO.File.WriteAllLines(fileName, textLine);
lineNumber = i;
break; //go out from loop
}
}
return lineNumber
}
I have two text files, Source.txt and Target.txt. The source will never be modified and contain N lines of text. So, I want to delete a specific line of text in Target.txt, and replace by an specific line of text from Source.txt, I know what number of line I need, actually is the line number 2, both files.
I haven something like this:
string line = string.Empty;
int line_number = 1;
int line_to_edit = 2;
using StreamReader reader = new StreamReader(#"C:\target.xml");
using StreamWriter writer = new StreamWriter(#"C:\target.xml");
while ((line = reader.ReadLine()) != null)
{
if (line_number == line_to_edit)
writer.WriteLine(line);
line_number++;
}
But when I open the Writer, the target file get erased, it writes the lines, but, when opened, the target file only contains the copied lines, the rest get lost.
What can I do?
the easiest way is :
static void lineChanger(string newText, string fileName, int line_to_edit)
{
string[] arrLine = File.ReadAllLines(fileName);
arrLine[line_to_edit - 1] = newText;
File.WriteAllLines(fileName, arrLine);
}
usage :
lineChanger("new content for this line" , "sample.text" , 34);
You can't rewrite a line without rewriting the entire file (unless the lines happen to be the same length). If your files are small then reading the entire target file into memory and then writing it out again might make sense. You can do that like this:
using System;
using System.IO;
class Program
{
static void Main(string[] args)
{
int line_to_edit = 2; // Warning: 1-based indexing!
string sourceFile = "source.txt";
string destinationFile = "target.txt";
// Read the appropriate line from the file.
string lineToWrite = null;
using (StreamReader reader = new StreamReader(sourceFile))
{
for (int i = 1; i <= line_to_edit; ++i)
lineToWrite = reader.ReadLine();
}
if (lineToWrite == null)
throw new InvalidDataException("Line does not exist in " + sourceFile);
// Read the old file.
string[] lines = File.ReadAllLines(destinationFile);
// Write the new file over the old file.
using (StreamWriter writer = new StreamWriter(destinationFile))
{
for (int currentLine = 1; currentLine <= lines.Length; ++currentLine)
{
if (currentLine == line_to_edit)
{
writer.WriteLine(lineToWrite);
}
else
{
writer.WriteLine(lines[currentLine - 1]);
}
}
}
}
}
If your files are large it would be better to create a new file so that you can read streaming from one file while you write to the other. This means that you don't need to have the whole file in memory at once. You can do that like this:
using System;
using System.IO;
class Program
{
static void Main(string[] args)
{
int line_to_edit = 2;
string sourceFile = "source.txt";
string destinationFile = "target.txt";
string tempFile = "target2.txt";
// Read the appropriate line from the file.
string lineToWrite = null;
using (StreamReader reader = new StreamReader(sourceFile))
{
for (int i = 1; i <= line_to_edit; ++i)
lineToWrite = reader.ReadLine();
}
if (lineToWrite == null)
throw new InvalidDataException("Line does not exist in " + sourceFile);
// Read from the target file and write to a new file.
int line_number = 1;
string line = null;
using (StreamReader reader = new StreamReader(destinationFile))
using (StreamWriter writer = new StreamWriter(tempFile))
{
while ((line = reader.ReadLine()) != null)
{
if (line_number == line_to_edit)
{
writer.WriteLine(lineToWrite);
}
else
{
writer.WriteLine(line);
}
line_number++;
}
}
// TODO: Delete the old file and replace it with the new file here.
}
}
You can afterwards move the file once you are sure that the write operation has succeeded (no excecption was thrown and the writer is closed).
Note that in both cases it is a bit confusing that you are using 1-based indexing for your line numbers. It might make more sense in your code to use 0-based indexing. You can have 1-based index in your user interface to your program if you wish, but convert it to a 0-indexed before sending it further.
Also, a disadvantage of directly overwriting the old file with the new file is that if it fails halfway through then you might permanently lose whatever data wasn't written. By writing to a third file first you only delete the original data after you are sure that you have another (corrected) copy of it, so you can recover the data if the computer crashes halfway through.
A final remark: I noticed that your files had an xml extension. You might want to consider if it makes more sense for you to use an XML parser to modify the contents of the files instead of replacing specific lines.
When you create a StreamWriter it always create a file from scratch, you will have to create a third file and copy from target and replace what you need, and then replace the old one.
But as I can see what you need is XML manipulation, you might want to use XmlDocument and modify your file using Xpath.
You need to Open the output file for write access rather than using a new StreamReader, which always overwrites the output file.
StreamWriter stm = null;
fi = new FileInfo(#"C:\target.xml");
if (fi.Exists)
stm = fi.OpenWrite();
Of course, you will still have to seek to the correct line in the output file, which will be hard since you can't read from it, so unless you already KNOW the byte offset to seek to, you probably really want read/write access.
FileStream stm = fi.Open(FileMode.OpenOrCreate, FileAccess.ReadWrite, FileShare.None);
with this stream, you can read until you get to the point where you want to make changes, then write. Keep in mind that you are writing bytes, not lines, so to overwrite a line you will need to write the same number of characters as the line you want to change.
I guess the below should work (instead of the writer part from your example). I'm unfortunately with no build environment so It's from memory but I hope it helps
using (var fs = File.Open(filePath, FileMode.Open, FileAccess.ReadWrite)))
{
var destinationReader = StreamReader(fs);
var writer = StreamWriter(fs);
while ((line = reader.ReadLine()) != null)
{
if (line_number == line_to_edit)
{
writer.WriteLine(lineToWrite);
}
else
{
destinationReader .ReadLine();
}
line_number++;
}
}
The solution works fine. But I need to change single-line text when the same text is in multiple places. For this, need to define a trackText to start finding after that text and finally change oldText with newText.
private int FindLineNumber(string fileName, string trackText, string oldText, string newText)
{
int lineNumber = 0;
string[] textLine = System.IO.File.ReadAllLines(fileName);
for (int i = 0; i< textLine.Length;i++)
{
if (textLine[i].Contains(trackText)) //start finding matching text after.
traced = true;
if (traced)
if (textLine[i].Contains(oldText)) // Match text
{
textLine[i] = newText; // replace text with new one.
traced = false;
System.IO.File.WriteAllLines(fileName, textLine);
lineNumber = i;
break; //go out from loop
}
}
return lineNumber
}
Im creating a text file and the last line is ""
private void lastRunDate()
{
String lastLine = readLastDate();
String[] date = lastLine.Split('/');
DateTime dt = new DateTime(Int32.Parse(date[2]), Int32.Parse(date[0]), Int32.Parse(date[1]));
DateTime currentDT = DateTime.Now;
argValue = 1;
if ((dt.Month == currentDT.Month) && (argValue == 0))
{
MessageBox.Show("This application has already been run this month");
this.Close();
}
}
private void AddRecordToFile()
{
DateTime now = DateTime.Now;
prepareToEmail();
string path = filepath;
bool dirtyData = true;
// This text is added only once to the file.
if (!File.Exists(path))
{
// Create a file to write to.
using (StreamWriter sw = File.CreateText(path))
{
sw.Write(now.ToShortDateString());
}
dirtyData = false;
}
if (dirtyData)
{
// This text is always added, making the file longer over time
// if it is not deleted.
using (StreamWriter sw = File.AppendText(path))
{
sw.Write(now.ToShortDateString());
}
}
}
private String readLastDate()
{
using (StreamReader sr = new StreamReader(filepath))
{
// Initialize to null so we are not stuck in loop forever in case there is nothing in the file to read
String line = null;
do
{
line = sr.ReadLine();
// Is this the end of the file?
if (line == null)
{
// Yes, so bail out of loop
return "01/01/1900"; // I had to put something
}
// Is the line empty?
if (line == String.Empty)
{
// Yes, so skip it
continue;
}
// Here you process the non-empty line
return line;
} while (true);
}
}
is what I am using to create the file (or append it)
now is a DateTime object
I used your (Karl) code to create a method called "readLastDate()"
I get the 1st date instead.
I'm probably being way to pragmatic and simple, but skip all the stream stuff and use File class directly like this...
string newLine = "";
if (!isFirstLine)
newLine = Environment.NewLine;
File.AppendAllText(
filePath,
string.Format("{0}{1}", newLine, DateTime.Now.ToString()));
You could use a sw.Write and PRE-pend a linefeed. Unfortunately that will give you an empty line at the start of the file.
Have you tried using the command .Trimend ('\n')?
http://msdn.microsoft.com/en-us/library/system.string.trimend.aspx
Do this:
sw.Write(now.ToShortDateString());
Here is the MSDN documentation for StreamWriter.WriteLine.
Here is the MSDN documentation for StreamWriter.Write.
UPDATE:
Keep using the WriteLine, but change the way you read your values in from the file:
using (StreamReader sr = new StreamReader(path))
{
// Initialize to null so we are not stuck in loop forever in case there is nothing in the file to read
String line = null;
do
{
line = sr.ReadLine();
// Is this the end of the file?
if (line == null)
{
// Yes, so bail out of loop
return;
}
// Is the line empty?
if (line == String.Empty)
{
// Yes, so skip it
continue;
}
// Here you process the non-empty line
} while (true);
}
Adding a record should be a simple matter of calling File.AppendAllText, as pointed out in another answer. Although I would recommend:
File.AppendAllText(filePath, DateTime.Now.ToString() + Environment.NewLine);
To read the last date from the file is also very easy:
string lastGoodLine = "01/01/1900";
using (StringReader sr = new StringReader(filePath))
{
while (!sr.EndOfStream)
{
string line = sr.ReadLine();
if (!string.IsNullOrEmpty(line))
lastGoodLine = line;
}
}
return lastGoodLine;
Firstly, i'd just like to mention that I've only started learning C# a few days ago so my knowledge of it is limited.
I'm trying to create a program that will parse text files for certain phrases input by the user and then output them into a new text document.
At the moment, i have it the program searching the original input file and gathering the selected text input by the user, coping those lines out, creating new text files and then merging them together and also deleting them afterwards.
I'm guessing that this is not the most efficient way of creating this but i just created it and had it work in a logical manor for me to understand as a novice.
The code is as follows;
private void TextInput1()
{
using (StreamReader fileOpen = new StreamReader(txtInput.Text))
{
using (StreamWriter fileWrite = new StreamWriter(#"*DIRECTORY*\FIRSTFILE.txt"))
{
string file;
while ((file = fileOpen.ReadLine()) != null)
{
if (file.Contains(txtFind.Text))
{
fileWrite.Write(file + "\r\n");
}
}
}
}
}
private void TextInput2()
{
using (StreamReader fileOpen = new StreamReader(txtInput.Text))
{
using (StreamWriter fileWrite = new StreamWriter(#"*DIRECTORY*\SECONDFILE.txt"))
{
string file;
while ((file = fileOpen.ReadLine()) != null)
{
if (file.Contains(txtFind2.Text))
{
fileWrite.Write("\r\n" + file);
}
}
}
}
}
private static void Combination()
{
ArrayList fileArray = new ArrayList();
using (StreamWriter writer = File.CreateText(#"*DIRECTORY*\FINALOUTPUT.txt"))
{
using (StreamReader reader = File.OpenText(#"*DIRECTORY*\FIRSTFILE.txt"))
{
writer.Write(reader.ReadToEnd());
}
using (StreamReader reader = File.OpenText(#"*DIRECTORY*\SECONDFILE.txt"))
{
writer.Write(reader.ReadToEnd());
}
}
}
private static void Delete()
{
if (File.Exists(#"*DIRECTORY*\FIRSTFILE.txt"))
{
File.Delete(#"*DIRECTORY*\FIRSTFILE.txt");
}
if (File.Exists(#"*DIRECTORY*\SECONDFILE.txt"))
{
File.Delete(#"*DIRECTORY*\SECONDFILE.txt");
}
}
The output file that is being created is simply outputting the first text input followed by the second. I am wondering if it is possible to be able to merge them into 1 file, 1 line at a time as it is a consecutive file meaning have the information from Input 1 followed 2 is needed rather than all of 1 then all of 2.
Thanks, Neil.
To combine the two files content in an one merged file line by line you could substitute your Combination() code with this
string[] file1 = File.ReadAllLines("*DIRECTORY*\FIRSTFILE.txt");
string[] file2 = File.ReadAllLines("*DIRECTORY*\SECONDFILE.txt");
using (StreamWriter writer = File.CreateText(#"*DIRECTORY*\FINALOUTPUT.txt"))
{
int lineNum = 0;
while(lineNum < file1.Length || lineNum < file2.Length)
{
if(lineNum < file1.Length)
writer.WriteLine(file1[lineNum]);
if(lineNum < file2.Length)
writer.WriteLine(file2[lineNum]);
lineNum++;
}
}
This assumes that the two files don't contains the same number of lines.
try this method. You can receive three paths. File 1, File 2 and File output.
public void MergeFiles(string pathFile1, string pathFile2, string pathResult)
{
File.WriteAllText(pathResult, File.ReadAllText(pathFile1) + File.ReadAllText(pathFile2));
}
If the pathResult file exists, the WriteAllText method will overwrite it. Remember to include System.IO namespace.
Important: It is not recommended for large files! Use another options available on this thread.
If your input files are quite large and you run out of memory, you could also try wrapping the two readers like this:
using (StreamWriter writer = File.CreateText(#"*DIRECTORY*\FINALOUTPUT.txt"))
{
using (StreamReader reader1 = File.OpenText(#"*DIRECTORY*\FIRSTFILE.txt"))
{
using (StreamReader reader2 = File.OpenText(#"*DIRECTORY*\SECONDFILE.txt"))
{
string line1 = null;
string line2 = null;
while ((line1 = reader1.ReadLine()) != null)
{
writer.WriteLine(line1);
line2 = reader2.ReadLine();
if(line2 != null)
{
writer.WriteLine(line2);
}
}
}
}
}
Still, you have to have an idea how many lines you have in your input files, but I think it gives you the general idea to proceed.
Using a FileInfo extension you could merge one or more files by doing the following:
public static class FileInfoExtensions
{
public static void MergeFiles(this FileInfo fi, string strOutputPath , params string[] filesToMerge)
{
var fiLines = File.ReadAllLines(fi.FullName).ToList();
fiLines.AddRange(filesToMerge.SelectMany(file => File.ReadAllLines(file)));
File.WriteAllLines(strOutputPath, fiLines.ToArray());
}
}
Usage
FileInfo fi = new FileInfo("input");
fi.MergeFiles("output", "File2", "File3");
I appreciate this question is almost old enough to (up)vote (itself), but for an extensible approach:
const string FileMergeDivider = "\n\n";
public void MergeFiles(string outputPath, params string[] inputPaths)
{
if (!inputPaths.Any())
throw new ArgumentException(nameof(inputPaths) + " required");
if (inputPaths.Any(string.IsNullOrWhiteSpace) || !inputPaths.All(File.Exists))
throw new ArgumentNullException(nameof(inputPaths), "contains invalid path(s)");
File.WriteAllText(outputPath, string.Join(FileMergeDivider, inputPaths.Select(File.ReadAllText)));
}
I need to delete an exact line from a text file but I cannot for the life of me workout how to go about doing this.
Any suggestions or examples would be greatly appreciated?
Related Questions
Efficient way to delete a line from a text file (C#)
If the line you want to delete is based on the content of the line:
string line = null;
string line_to_delete = "the line i want to delete";
using (StreamReader reader = new StreamReader("C:\\input")) {
using (StreamWriter writer = new StreamWriter("C:\\output")) {
while ((line = reader.ReadLine()) != null) {
if (String.Compare(line, line_to_delete) == 0)
continue;
writer.WriteLine(line);
}
}
}
Or if it is based on line number:
string line = null;
int line_number = 0;
int line_to_delete = 12;
using (StreamReader reader = new StreamReader("C:\\input")) {
using (StreamWriter writer = new StreamWriter("C:\\output")) {
while ((line = reader.ReadLine()) != null) {
line_number++;
if (line_number == line_to_delete)
continue;
writer.WriteLine(line);
}
}
}
The best way to do this is to open the file in text mode, read each line with ReadLine(), and then write it to a new file with WriteLine(), skipping the one line you want to delete.
There is no generic delete-a-line-from-file function, as far as I know.
One way to do it if the file is not very big is to load all the lines into an array:
string[] lines = File.ReadAllLines("filename.txt");
string[] newLines = RemoveUnnecessaryLine(lines);
File.WriteAllLines("filename.txt", newLines);
Hope this simple and short code will help.
List linesList = File.ReadAllLines("myFile.txt").ToList();
linesList.RemoveAt(0);
File.WriteAllLines("myFile.txt"), linesList.ToArray());
OR use this
public void DeleteLinesFromFile(string strLineToDelete)
{
string strFilePath = "Provide the path of the text file";
string strSearchText = strLineToDelete;
string strOldText;
string n = "";
StreamReader sr = File.OpenText(strFilePath);
while ((strOldText = sr.ReadLine()) != null)
{
if (!strOldText.Contains(strSearchText))
{
n += strOldText + Environment.NewLine;
}
}
sr.Close();
File.WriteAllText(strFilePath, n);
}
You can actually use C# generics for this to make it real easy:
var file = new List<string>(System.IO.File.ReadAllLines("C:\\path"));
file.RemoveAt(12);
File.WriteAllLines("C:\\path", file.ToArray());
This can be done in three steps:
// 1. Read the content of the file
string[] readText = File.ReadAllLines(path);
// 2. Empty the file
File.WriteAllText(path, String.Empty);
// 3. Fill up again, but without the deleted line
using (StreamWriter writer = new StreamWriter(path))
{
foreach (string s in readText)
{
if (!s.Equals(lineToBeRemoved))
{
writer.WriteLine(s);
}
}
}
Read and remember each line
Identify the one you want to get rid
of
Forget that one
Write the rest back over the top of
the file
I cared about the file's original end line characters ("\n" or "\r\n") and wanted to maintain them in the output file (not overwrite them with what ever the current environment's char(s) are like the other answers appear to do). So I wrote my own method to read a line without removing the end line chars then used it in my DeleteLines method (I wanted the option to delete multiple lines, hence the use of a collection of line numbers to delete).
DeleteLines was implemented as a FileInfo extension and ReadLineKeepNewLineChars a StreamReader extension (but obviously you don't have to keep it that way).
public static class FileInfoExtensions
{
public static FileInfo DeleteLines(this FileInfo source, ICollection<int> lineNumbers, string targetFilePath)
{
var lineCount = 1;
using (var streamReader = new StreamReader(source.FullName))
{
using (var streamWriter = new StreamWriter(targetFilePath))
{
string line;
while ((line = streamReader.ReadLineKeepNewLineChars()) != null)
{
if (!lineNumbers.Contains(lineCount))
{
streamWriter.Write(line);
}
lineCount++;
}
}
}
return new FileInfo(targetFilePath);
}
}
public static class StreamReaderExtensions
{
private const char EndOfFile = '\uffff';
/// <summary>
/// Reads a line, similar to ReadLine method, but keeps any
/// new line characters (e.g. "\r\n" or "\n").
/// </summary>
public static string ReadLineKeepNewLineChars(this StreamReader source)
{
if (source == null)
throw new ArgumentNullException(nameof(source));
char ch = (char)source.Read();
if (ch == EndOfFile)
return null;
var sb = new StringBuilder();
while (ch != EndOfFile)
{
sb.Append(ch);
if (ch == '\n')
break;
ch = (char)source.Read();
}
return sb.ToString();
}
}
Are you on a Unix operating system?
You can do this with the "sed" stream editor. Read the man page for "sed"
What?
Use file open, seek position then stream erase line using null.
Gotch it? Simple,stream,no array that eat memory,fast.
This work on vb.. Example search line culture=id where culture are namevalue and id are value and we want to change it to culture=en
Fileopen(1, "text.ini")
dim line as string
dim currentpos as long
while true
line = lineinput(1)
dim namevalue() as string = split(line, "=")
if namevalue(0) = "line name value that i want to edit" then
currentpos = seek(1)
fileclose()
dim fs as filestream("test.ini", filemode.open)
dim sw as streamwriter(fs)
fs.seek(currentpos, seekorigin.begin)
sw.write(null)
sw.write(namevalue + "=" + newvalue)
sw.close()
fs.close()
exit while
end if
msgbox("org ternate jua bisa, no line found")
end while
that's all..use #d