We Keep Coding

Why my server program prints the first letter of the message I sent from client in C#?

I am trying to send a message from a Socket client I created in C# on an Android device to a TCPListener server on my PC. The message is sent and I can see it printed on the output of the terminal as I programmed it to but now the server prints the first letter of the message only like when I send David, it only prints D. I need help to revise my code and make it print the entire message sent from the Android client. The code for the server program is below
static void Main(string[] args)
{
TcpListener server = null;
try
{
//decide where the aplication will listen for connections
int port = 13000;
IPAddress localAddress = IPAddress.Parse("192.168.49.147");
server = new TcpListener(localAddress, port);
//start listening for client requests
server.Start();
//initialize buffer for reading data received from a client
byte[] bytes = new byte[256];
string? data;
data = null;
//enter into the listening loop
while (true)
{
Console.WriteLine("Listening for connections");
//perform a blocking call to accept requests
//You could also use a server.Accept() to accept an incoming connection
TcpClient client = server.AcceptTcpClient();
Console.WriteLine("Connected");
data = null;
//get a stream object for reading and writing
NetworkStream stream = client.GetStream();
int i;
//loop to receive all the data
while ((i = stream.Read(bytes, 0, bytes.Length)) != 0)
{
//translate the byte received into ASCII encoded data
//something is wrong here as it prints the first character of the string
data = System.Text.Encoding.ASCII.GetString(bytes, 0, 1);
Console.WriteLine("Received: {0}", data);
//process the data sent ny the client
data.ToUpper();
byte[] msg = System.Text.Encoding.ASCII.GetBytes(data);
// Send back a response.
stream.Write(msg, 0, msg.Length);
Console.WriteLine("Sent: {0}", data);
}
//shut down and end connection
client.Close();
}
}catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
//stop listening for new connections
server.Stop();
}
}

How to connect SocketIO with C# client

C# I am developing a MIP plugin for Milestone VMS.
I have a problem while connecting to SocketIO with C#.
I have tried to connect to SocketIO with TcpClient, Socket, ClientWebSocket
TcpClient tcpClient = new TcpClient();
tcpClient.Connect("127.0.0.1, 3001);
I also have tried to connect with ClientWebSocket but again no reaction in server side.
using (var client = new ClientWebSocket())
{
// await client.ConnectAsync(new Uri("ws://192.168.100.25:8090/?token="),timeout.Token);
await client.ConnectAsync(new Uri(LOCAL_PATH), timeout.Token);
var buffer = new ArraySegment<byte>(new byte[1000]);
var result = await client.ReceiveAsync(buffer, timeout.Token);
}
Can anyone provide some libraries that may serve as clients to SocketIO?
URI has this syntax: http://127.0.0.1:3001?token=xxx

here is a tested code that i use , supposing your server is running , you need to pass the IP or HostName and port number , then come the payload or message that you want to send :
private bool ConnectAndSendMessage(String server, Int32 port, String message)
{
try
{
// Create a TcpClient.
TcpClient client = new TcpClient(server, port);
// Translate the passed message into ASCII and store it as a Byte array.
Byte[] data = System.Text.Encoding.ASCII.GetBytes(message);
// Get a client stream for reading and writing.
NetworkStream stream = client.GetStream();
// Send the message to the connected TcpServer.
stream.Write(data, 0, data.Length);
// Buffer to store the response bytes receiver from the running server.
data = new Byte[256];
// String to store the response ASCII representation.
String responseData = String.Empty;
// Read the first batch of the TcpServer response bytes.
Int32 bytes = stream.Read(data, 0, data.Length);
responseData = System.Text.Encoding.ASCII.GetString(data, 0, bytes);
// Close everything.
stream.Close();
client.Close(); return true;
}
catch (ArgumentNullException e)
{
_txtStyling.WriteCustomLine(string.Format("ArgumentNullException: {0} \n\n", e.Message), 14, false, false, Brushes.Red); return false;
}
catch (SocketException e)
{
_txtStyling.WriteCustomLine(string.Format("SocketException: {0} \n\n", e.Message), 14, false, false, Brushes.Red); return false;
}
}

C# one tcp networkstream accepted

I have an issue with a TCP Listener.
The scenario is the following:
- I am receiving TCP packets (8192 Bytes each) and I would like to dump the data received from NetworkStream into a file (using FileStream);
- What I saw is that all the TCP packets arrived to the TCP listener but only the first 8192 Bytes are dumped into the file.
I believe that the NetStream is faster than the IO operation to the file.
My code is:
try
{
// Set TcpListener on port 8
Int32 portN = 8;
TcpListener server = new TcpListener(IPAddress.Any, portN);
// Start listening for client requests
server.Start();
Console.Write("Waiting for connection... ");
// Define File Name
string RcvFileName = #"c:\ethernet\out_file.raw";
// Buffer for reading data
int NrBytesRec;
Byte[] RecData = new Byte[8192];
// enter into listening loop
while (true)
{
// Perform a blocking call to accept requests.
// You can also user server.AcceptSocket() here.
TcpClient client = server.AcceptTcpClient();
Console.WriteLine("Connected!");
// Get a stream object for reading and writing
NetworkStream netstream = client.GetStream();
// Append data into file
FileStream fs_wr = new FileStream(RcvFileName, FileMode.Append, FileAccess.Write);
// Dump data
while ((NrBytesRec = netstream.Read(RecData, 0, RecData.Length)) > 0)
{
fs_wr.Write(RecData, 0, NrBytesRec);
Console.WriteLine("Received: {0}", NrBytesRec);
}
netstream.Close();
fs_wr.Close();
//client.Close();
}

Message not received TCP

My IP-Camera is configured to send alarm messages to my computer.
IPAddress of camera: 10.251.51.1
IPAddress of my computer: 10.251.51.136
The camera can be configured to send messages to any port on my computer.
So, I set the alarm destination to my computer's IP Address: 10.251.51.136 at port 3487.
Now, what should be done at my computer to get the message sent by the camera ?
I tried to write a TCPListener from MSDN and the code is below:
Int32 port = 3487;
IPAddress localAddr = IPAddress.Parse("10.251.51.136");
// TcpListener server = new TcpListener(port);
server = new TcpListener(localAddr, port);
server.Start();
// Start listening for client requests.
// Buffer for reading data
Byte[] bytes = new Byte[256];
String data = null;
// Enter the listening loop.
while (true)
{
Console.Write("Waiting for a connection... ");
// Perform a blocking call to accept requests.
// You could also user server.AcceptSocket() here.
TcpClient client = server.AcceptTcpClient();
Console.WriteLine("Connected!");
server.Start();
data = null;
// Get a stream object for reading and writing
NetworkStream stream = client.GetStream();
int i;
// Loop to receive all the data sent by the client.
while ((i = stream.Read(bytes, 0, bytes.Length)) != 0)
{
// Translate data bytes to a ASCII string.
data = System.Text.Encoding.ASCII.GetString(bytes, 0, i);
Console.WriteLine("Received: {0}", data);
// Process the data sent by the client.
data = data.ToUpper();
byte[] msg = System.Text.Encoding.ASCII.GetBytes(data);
// Send back a response.
stream.Write(msg, 0, msg.Length);
Console.WriteLine("Sent: {0}", data);
}
// Shutdown and end connection
client.Close();
}
}
catch (SocketException e)
{
Console.WriteLine("SocketException: {0}", e);
}
finally
{
// Stop listening for new clients.
server.Stop();
}
But this does not seem to be working.
Or is my entire approach flawed ? Should i implement TCPListener or TCPServer instead for my scenario above?
Any pointers why?

C# client/server Question

I'm incredibly confused as to what is going on here. I've been putting in break points and I just can't seem to understand. Basically, I have a client and a server. I want the client to send two separate strings of data. From putting in break points, I noticed that my client does in fact fill both strings with the appropriate data. However, the server never ever sees the second string. Why is this happening and how do I fix it? Any help at all would be greatly appreciate! Below is my code:
Server:
private static void HandleClientComm(object client)
{
/** creating a list which contains DatabaseFile objects **/
List<DatabaseFile> theDatabase = new List<DatabaseFile>();
TcpClient tcpClient = (TcpClient)client;
NetworkStream clientStream = tcpClient.GetStream();
StringBuilder response = new StringBuilder();
byte[] message = new byte[4096];
int bytesRead;
do
{
bytesRead = 0;
try
{
/*do
{
bytesRead = clientStream.Read(message, 0, message.Length);
response.Append(Encoding.ASCII.GetString(message, 0, bytesRead));
} while (clientStream.DataAvailable);*/
when i change this commented code to bytesRead = clientStream.Read(message, 0, 4096); i get an IOException Error that reads as follows: Unable to write data to the transport connection: An existing connection was forcibly closed by the remote host. Hence, i changed it to a do while loop. How do i get around this IOException and accept the second string?
ASCIIEncoding encoder = new ASCIIEncoding();
String file = encoder.GetString(message, 0, bytesRead);
Menu.Insert(theDatabase, file);
}
catch (Exception)
{
// A socket error has occured
break;
}
if (bytesRead == 0)
{
// The client has disconnected from the server
break;
}
} while (clientStream.DataAvailable);
// Release connections
clientStream.Close();
tcpClient.Close();
}
Client:
static void Main(string[] args)
{
TcpClient client = new TcpClient();
IPEndPoint serverEndPoint = new IPEndPoint(IPAddress.Parse("127.0.0.1"), 8888);
client.Connect(serverEndPoint);
NetworkStream clientStream = client.GetStream();
NetworkStream clientStream2 = client.GetStream();
ASCIIEncoding encoder = new ASCIIEncoding();
ASCIIEncoding encoder2 = new ASCIIEncoding();
String text = System.IO.File.ReadAllText("FirstNames.txt");
String text2 = System.IO.File.ReadAllText("LastNames.txt");
byte[] buffer = encoder.GetBytes(text);
Console.ReadLine();
clientStream.Write(buffer, 0, buffer.Length);
clientStream.Flush();
Console.ReadLine();
byte[] buffer2 = encoder2.GetBytes(text2);
clientStream2.Write(buffer2, 0, buffer2.Length);
clientStream2.Flush();
Console.ReadLine();
}
}

The communication between client and server happens like this (note that the order of steps is just for illustration purposes, the actual order at runtime may be different):
Client: client.Connect(serverEndPoint)
Server: HandleClientComm(newClient)
Client: clientStream.Write(buffer, 0, buffer.Length)
Server: bytesRead = clientStream.Read(message, 0, message.Length)
Note that Read is not guaranteed to read entire message. It is perfectly ok to return just the portion that has been received so far
Client: Console.ReadLine()
Server: while (clientStream.DataAvailable)
There is no data on the stream - the client has not sent any. This would likely happen even without ReadLine - there is a window of time before the client sends data again
Server: tcpClient.Close()
Client: clientStream2.Write(buffer2, 0, buffer2.Length)
You can get an exception here, or not - depending on whether the server has already closed the connection, in any case the server is not reading anymore.
You need to define your own message protocol that both server and client will honor. For example, you can have the client close the connection when it is done sending:
Client:
using (var client = new TcpClient("localhost", 8888))
using (var clientStream = client.GetStream())
{
var buffer = Encoding.ASCII.GetBytes( File.ReadAllText("FirstNames.txt") );
clientStream.Write(buffer, 0, buffer.Length);
buffer = Encoding.ASCII.GetBytes( File.ReadAllText("LastNames.txt") );
clientStream.Write(buffer, 0, buffer.Length);
}
Server:
using (var tcpClient = (TcpClient)client)
using (var clientStream = tcpClient.GetStream())
{
// Store everything that the client sends.
// This will work if the client closes the connection gracefully
// after sending everything
var receivedData = new MemoryStream();
clientStream.CopyTo(receivedData);
var rawBytes = receivedData.ToArray();
var file = Encoding.ASCII.GetString(rawBytes, 0, rawBytes.Length);
Menu.Insert(theDatabase, file);
}
The protocol is simple, and may be enough for your case. However, there are issues with it which should be addressed in production code (e.g. what if the client sends too much data, exhausting server memory, what if the client stops sending without closing the connection, etc.)

because while (clientStream.DataAvailable) is no longer true after your first client call.

You are exiting your client-recv loop in your server just because DatAvailable is false. This means if the client were to send a frame of data (which you consume) and pause then your server would see no data available at that moment and disconnect, even if a split second later another frame of data from the client was about to come in. Almost always, the end of a dialog is based on the content of the data being passed. You can certainly never try to rely on the fact that DataAvailable happens to be false one time.
As a follow-up, if you provide more info on the protocol that is used we can give more assitance. For example, if the prototcol is that two strings are sent with CR/LF at the end then the server loop should be inspecting the buffer for that to know when to disconnect.