I have an asp.net site, and I need to use both Windows Auth and Anonymous Auth together.
I need Windows auth as I need to get the username of the logged on user, but also the site runs a web-service which must be accessed anonymously.
If I turn on Windows Auth I can get the user and this works fine, but the site calling the web-service returns a 401 error. If I add in Anonymous access too the site using the web-service works fine, but I can no longer get the username of the logged in user.
How can I get the best of both - i.e. get the user name, but not kill my web service.
You can add the following to disable access to specific locations within your directory tree
<location path="path.to.web.service">
<system.web>
<authorization>
<allow users="*"/>
</authorization>
</system.web>
</location>
while keeping the main site under control of the Windows authentication.
See : http://msdn.microsoft.com/en-us/library/b6x6shw7.aspx
Related
I'm trying to create a simple action filter for my MVC site that checks the current Windows user against those allowed access to the site. For some reason, the filterContext.HttpContext.User.Identity object is always set to anonymous with no username. I've tried to grab it at different stages (OnAuthenticate and OnAuthorize), but it's always anonymous.
I currently have anonymous and Windows authentication enabled in IIS (actually followed this example to configure the Windows Auth feature), and I have the following block in the system.web node of my web.config:
<authentication mode="Windows" />
<authorization>
<allow users="*" />
<deny users="?" />
</authorization>
However for some reason, the Identity is always anonymous with no username. I have to be missing something here. With Windows Auth set in IIS, I'm always prompted for the username/password combo (which actually fails with HTTP401.1 error 0xc000006d, though I think this might be because I have a custom host header setup for development). I've also read a few articles that suggest this is because my site is determined to be in the internet zone and the answers always state to add the site to the intranet zone in Internet Explorer. This seems like a band-aid fix though, and not the actual solution.
Ideally, I would like to have the following:
User browses to my site
Behind the scenes, their Windows username is picked up, and authenticated against allowed users managed by the app
User authenticated successfully, page loads, user is none the wiser they were authenticated
What do I need to do to achieve this?
Thanks in advance for any help. Please let me know if I can provide more context.
Edit: Forgot to add I'm running this on Windows 7 SP1, IIS 7.5
Try
<system.web>
<identity impersonate="true" />
</system.web>
OR
Click On The Project Not the Solution => Open Properties Explorer not right click properties => you will find Anonymous Authentication set to disabled
In your solution explorer, press F4 over the project, and change Windows Authentication to Enable if you are running your project from Visual Studio;
In IIS select your WebSite -> Authentication and Disable Anonymous Authentication and make sure that "Windows Authentication" if Enable
These two rules are in wrong order in your code
<allow users="*" />
<deny users="?" />
Since you first allow everyone, the second rule is not even evaluated.
Try switching them
<deny users="?" />
<allow users="*" />
This way you first deny anonymous requests so that the authentication pipeline can even return 401 to the client. When the NTLM/Kerberos authentication picks the username, the second rule allows everyone (authenticated this time).
For this to work you also have to disable the anonymous authentication.
You need to disable the anonymous authentication from iis and enable windows auth only.
So, I have two applications, one is Web and the other is a console app. The console app creates directories/folders and pdfs in a remote server. The web site (that is running in IIS) has a .aspx document that starts that console app. Running the console app does't give me problems, the problems come when I run the web site and fails to create the directories and pdfs. This is the error:
Error: Access to the path '\\SERVERIP\rae\RAE\' is denied.
That server has credentials and I am thinking that when I run just the console app it takes the credentials before typed (because to access the remote server I needed to type the credentials to see the folders in that server) but when I run the web site, the credentials are asked again (no prompt shown) and that's why the access is denied.
I am using C#'s System.IO.Directory.Exists(route); to check if exists and if it doesn't System.IO.Directory.CreateDirectory(route);
Is there a way to set the credentials for that server in code, on IIS or with another method?
you can set the condition on web.config for specific folder only.
<configuration>
<location path="Path/To/Public/Folder">
<system.web>
<authentication mode="Windows" />
<authorization>
<allow users="*"/>
<deny users="?"/>
</authorization>
</system.web>
</location>
</configuration>
Via the graphical interface of the IIS,
Application Pools
Select the one used by your application
Go to advanced settings (on the far right)
Set the identity to the User you want
I need to create an ASP .NET web page (hosted on Windows Server 2008R2 with IIS 7.5) which should be visible by domain users and anonymous users without prompting credential requests for both of them. Domain Users should be authorized to see the entire page, while anonymous users can see the public part of the page.
When I enable Windows authentication: domain users can see the entire page, but anonymous users are prompted for credentials.
When I enable anonymous authentication or both (anonymous and windows): anonymous users can see public part of the page, but domain users do not see the entire page (they are like anonymous users).
I use the following string to discriminate anonymous users and domain users:
WindowsAccountName = HttpContext.Current.Request.LogonUserIdentity.Name;
If WindowsAccountName is empty user is anonymous, otherwise is a domain user. Unfortunately, when anonymous authentication is enabled WindowsAccountName is always empty (even for domain users), but when anonymous authentication is disabled non-domain users are prompted for credentials.
Do you have any solution for these problem? Keep in mind that domain users are spread among different networks so IP address is not a good choice to discriminate domain users and non-domain users.
it looks like a catch-22 for me
Thanks.
The term for this is Mixed-Mode Authentication. I have done this multiple times.
This can be accomplished by using a windows authenticated site that does no more that pull the users credentials from AD and pass those to the anonymous site. I have done this using a custom ticket (GUID in a database) that expires in 5 seconds. The anonymous site takes the GUID passed, queries the DB and obtains the user id. Other ways I have done this with an encrypted URL parameter that contains the user id and time-stamp.
Internal Site
Create a Redirect URL Site: Setup this site as Window Auth so you can pull the User ID from Active Directory. Give your users this URL and/or make it the link they click on your Intranet. Then this site calls your anonymous site and passes the user credentials (login id).
a. This can be done either via an encrypted string on the URL or encrypted value in a cookie. You can encrypt with an expiration date/time value too.
b. (Speaking from Forms Auth) Create a Forms Authentication Ticket with that user ID. Run any other login logic you have. Done.
External Site - No Changes required. Let the users login as-is.
I don't know if it's too late to post this.I recently worked on enabling anonymous authentication on one page in the .NET 4.8 MVC application.
Let's say the page was accessible via URL: User/MyCustomPage
Application configuration was as follows:
1. In web.config authentication mode was specified and authorization was
set to deny for anonymous users.
<system.web>
<authentication mode= "windows"/>
<authorization>
<deny users="?"/>
</authorization>
</system.web>
2. In the controller, authorize tag was there.
3. In IIS, windows authentication was enabled, and anonymous mode was disabled.
I did the below steps:
1. Removed authorize tag from the specific controller and added
[AllowAnonymous] tag.
2. Enabled anonymous authentication in the IIS server. Go to
server->authentication-> Anonymous-> click Enable in the right pane.
3. I had to add the particular path, to exclude it from regular
windows authentication by writing the below code in web.config file.
<location path="User/MyCustomPage"/>
<system.web>
<authorization>
<allow users="?"/>
</authorization>
</system.web>
</location>
But Still, I was getting prompt for windows credentials on accessing the above URL. The reason I found that was:
The View that MyCustomPage was returning, was consuming another resource.
So, I have to add that path too in the web.config.
<location path="Bundle/Content/css"/>
<system.web>
<authorization>
<allow users="?"/>
</authorization>
</system.web>
</location>
I have an ASP.NET MVC4 website deployed on IIS with Windows Authentication enabled. My config file has this setting:
<authentication mode="Windows" />
<authorization>
<deny users="?" />
</authorization>
My understanding is that this will allow me to authenticate without having to type in credentials; i.e. an intranet site.
This works as intended, except for the first page load. When I first access the website, I am directed to the following URL:
http://localhost/SandboxWebsite/login.aspx?ReturnUrl=%2fSandboxWebsite
This is obviously a page that asks for credentials. When I then navigate again to http://localhost/SandboxWebsite/, I am automatically authenticated without having to enter any credentials.
Why is this occurring and how can I prevent it?
The problem was that, whilst anonymous access was disabled as a setting, there was no authorisation rule to deny anonymous users. Why this redirected me to Login.aspx I do not know, but I fixed it by adding the following rules.
IIS > MyWebsite > .NET Authorization Rules
John,
this is a long shot but have you tried using an address other than LocalHost to access the site ? It may be that your ASP.NET MVC4 website is expecting a specific domain name/computer name or IP address because of the way it was setup.
You could alter your hosts file to test this out.
Hope this helps.
Dorje
Here's my scenario:
I have an intranet application. I want to let the network users automatically get logged into the application using the Windows Authentication features. If the user isn't into my network, I'll pop up to them a login screen.
So, I changed the authentication mode into web.config file to Windows. Then I'm using the HttpContext.User.Identity object in order to get the logged user into the network. So I ran the app into my localhost and it works great.
When I publish the application into the server, when I try to automatic log in, the Identity object is always empty.
So, I've tried the following steps:
Deny anonymous users. <deny users="?"/>, which not allows any anonymous users to enter in the application, but I got a problem here: when the user isn't into our network, the server pops up that default authentication window from Window Servers, not my personal login screen.
Let anonymous users in. If I get rid with that <deny users="?"/>, any user can access the page, but it ALWAYS goes to the login screen, even if I'm into my local network.
So, what I need is: when the user is into the local network, go straight without login. If they aren't, pop up a login screen to them.
Can someone help me to figure out what's going on?
Thank you all!
Do the following,
<identity impersonate="true" />
<authentication mode="None" />
<authorization>
<deny users="?" />
</authorization>
Hope it helps.