I recompile my solution, and when it starts in debug mode I get this warnings around my breakpoint saying that it won't be hit.
There is a copy of the source code file that is different.
Why would there be multiple versions of my source code loaded when trying to debug?
I even do a clean compile and still get this error.
Visual Studio is usually pretty good at detecting when your source code doesn't match the code signature of your attached exe or dll process. So I suspect that it is one of two possible issues:
Your debug session's Platform/Configuration (e.g. Debug/x64) doesn't match the .exe or .dll compiled architecture. OR
What you think is a "clean compile" isn't really clean.
The only source code that Visual Studio knows about is the one in front of you. But when Visual Studio is debugging an .exe or .dll, it is attaching itself to the .exe or .dll process, using reflection, and analyzing the code of that .exe/.dll. It determined that your .exe/.dll doesn't match the Platform/Configuration you wish to debug, or its reflected source code doesn't match the written code that is in front of you in Visual Studio's IDE.
When you say that you do a clean compile, make sure that it is really really clean (don't rely on the Visual Studio "Clean" feature. It's not reliable in all cases. For example, if you have created Build Events that copy contents pre- or post-compile. Instead, delete your project's /bin and /obj folders, then recompile. That will ensure your binaries always match your latest code for debugging. Do this a few times, and see if you still get the issue.
I had same error in VS 2019 .I solved that way;
Tools->Options->Debbuging->General and "Require source files to exactly match the orginal version" deselect that option
I have a weird problem with PDB files in a VS 2013 C# project. Basically what is happening is that the PDB files are not getting rebuilt when the project is getting rebuilt. This is causing the project to always think it needs to get rebuilt. I've tried cleaning the solution, but if anything changes in the project it gets put back into the same state again.
I created a simple class library project and the behavior was the same. As a sanity check, I created the same class library on another PC and it worked as I would have expected.
Does anybody have any ideas as to what might be causing this strange behavior?
Please check “Advanced Build Settings Dialog Box”
Is “Debug Info” set none?
see MSDN
I had this problem. I went into Build > Configuration Manager. Make sure that the active solution configuration is Debug. Next change the platform to be Any CPU. Somehow many projects were getting built on a mixed platform which was only allowing a couple project's pdb files to get built.
I have exactly the same problem. The only solution I've managed to come up with is to add a pre-build step to each project to delete the .pdb:
del "$(ProjectDir)obj\$(Configuration)\$(TargetName).pdb"
Which then seems to force it to create a new file when it's built.
I've got this error while compiling a big c# solution in Visual Studio 2010.
Each time after compilation I had to delete obj folder of one the projects used by this solution. Otherwise I got the following error:
Could not write to output file '...\obj\Debug\Foo.Bar.dll'
The process cannot access the file because it is being used by another process
I've was looking for a solution all over the Internet and actually found/tried few of them.
For example : a lot of people on dev forums were suggesting not to start the compilation while UserControl (in some other sources From) designer is opened.
Some other people used pre-build scripts for obj folder removal, this particular solution is acceptable, but if the issued project is a widely used library its recompilation will cause recompilation of "parent" projects.
Finally I've discovered a solution for this VS2010 (SP1 too) "bug" and I want to share it with stackoverflow users.
In my case the problem was that csproj file was SELF-REFERENCING the locked '...\obj\Debug\Foo.Bar.dll' file. Crazy I know.
So I solved this annoying issue by removing the following line from .csproj file:
<Reference Include="Foo.Bar">
<HintPath>obj\Debug\Foo.Bar.dll</HintPath>
</Reference>
I initially found another solution to the problem as VS seems to lock the assembly in the obj\debug folder. I added a pre-build script to the project which fixed my problem.
del "$(ProjectDir)obj\*.*" /S /F /Q
After seeing the answer given by Salaros, that was indeed the problem. I created a new usercontrol that uses a Server control from another project. For some reason VS sometimes creates a self-references to itself when you view the usercontrol in design mode. Even removing the self-reference fixes it until VS thinks its time to add the reference again. Haven't found an exact pattern for that part.
PS: I'm using vs2012
In my case for me somehow the exe file was missing from release. Not sure how this happened. I replace it with a copy from debug and all was fine. I should have checked this sooner but never thought that the file would just turn up missing.
This problem happened to me when I:
Opened Visual Studio
Ran debug
Went to C: and used system cleanup
If you try to build again, you will find this error.
Solution:
Close Visual Studio
Do system cleanup
Restart your computer
Open Visual Studio as administrator
Choose your project
Clean
Rebuild
A C# desktop application (on the Visual Studio Express edition) worked, but then it didn't work 5 seconds later.
I tried the following:
Ensure debug configuration, debug flag, and full debug information are set on all assemblies.
Delete all bin and obj folders and all DLL files related to the project from my entire machine.
Recreate projects causing the problem from scratch.
Reboot.
I have two Windows Forms projects in the solution. One of them loads the debug information, one doesn't. They both refer to the assembly I'm trying to get debug information on in exactly the same way in the project file. Any ideas?
I want to add here, mostly for myself when I come back to review this question, that symbols are not loaded until the assembly is loaded, and the assembly is not loaded until it is needed. If the breakpoint is in a library that is only used in one function in your main assembly, the symbols will not be loaded (and it will show the breakpoint as not being hit) until that function is called.
Start debugging, as soon as you've arrived at a breakpoint or used Debug > Break All, use Debug > Windows > Modules. You'll see a list of all the assemblies that are loaded into the process. Locate the one you want to get debug info for. Right-click it and select Symbol Load Information. You'll get a dialog that lists all the directories where it looked for the .pdb file for the assembly. Verify that list against the actual .pdb location. Make sure it doesn't find an old one.
In normal projects, the assembly and its .pdb file should always have been copied by the IDE into the same folder as your .exe, i.e. the bin\Debug folder of your project. Make sure you remove one from the GAC if you've been playing with it.
Check to make sure that you are not in release but in Debug.
When in debug:
First try rebuilding your project by right mouse click the project > Rebuild
If that doesn't work, try a clean of the project (right mouse click on the project > clean)
If that didn't work check this:
Right mouse click your project
Select [Properties]
Select the [Build] tab
Make sure [Define DEBUG constant] and [Define TRACE constant] are checked
Make sure [Optimize Code] is unchecked
Click the [Advanced] button at the bottom of the Build tabpage
Make sure that [Debug Info:] is set to [full]
Click [OK] and rebuild the project ;-)
(step 7 generates the .pdb files, these are the debugging symbols)
Uncheck the "Enable Just My Code" option in the
Tools/Options/Debugging/General
Just something simple to try - you may have tried it already.
Right click the Solution in solution explorer, click "clean solution", this deletes all the compiled and temporary files associated with a solution.
Do a rebuild of the solution and try to debug again.
I've also had troubles with breakpoints multiple projects in a solution - some compiled as x86, some as x64.
The selected answer led me to fix my problem. But I need to do a few things more:
Even with "Debug" selected in the dropdown:
And in the project Properties > Build:
The Visual Studio was not loading symbols to a specific project. So in that dropdown I select "Configuration Manager" and saw that the settings to my web project was incorrect:
Then I set that to "Debug" and it started to generate the .pdb file.
BUT I need to manually copy the PDB and DLL and put in the folder that VS was looking (here is where the selected answer helped me):
Sometimes, even though it gives you this error, the Breakpoint still gets hit, so just ignore the error.
This happens fairly often in the Views of an MVC web app, i.e. .cshtml.
I was able to fix the error by simply setting the option in the 'Attach to Process' to 'Automatically determine the type of code to debug' option as shown in the attached screenshot.
Simply follow the steps below:
Go to Debug from the menu bar
Click on Attach to Process
Near the Attach to option, click on the Select button
The Select Code Type window will appear
Now select the option Automatically determine the type of code to debug and click the OK button.
Debug > Windows > Modules to see what modules were being loaded put me in the right direction.
In my case IIS Express seemed to be loading a different DLL from the temporary ASP.NET files.
The solution?
Browse to C:\Users\<YOUR USER>\AppData\Local\Temp\Temporary ASP.NET Files\vs
Delete everything in this directory!
Check if your .pbd file is missing in your bin/Debug folder. If it is then go to "Properties" of your project, selected "Build" and then "Advanced" at the bottom. Choose "full" under "Debug info" in the new window that appeared. This was my issue and solved it for me.
In my case "Optimize Code" was checked in my project properties. This caused VS to see my assembly as "not my code", and in turn, it did not load symbols for it.
The solution was to uncheck this.
Try running visual studio as an administrator within windows.
You need to enable "Generate debug info" in compiler settings
I tried everything mentioned above, but nothing worked.
[Clean solution, and check for PDB files etc.]
Even publishing the same solution did not resolve the issue.
Then I went to back to what I usually do to resolve (fool this stubborn Visual Studio)
All I did was to make a deliberate change in code and publish the solution.
Then I reverted the change and published again.
Voila [PDB files rid of evil spirits].. Not a smart resolution, but this did work.. :-|
We found the cause of our problem. This code was using the "CodeBehind" attribute in the Page directive of the .aspx file instead of the "CodeFile" attribute (ASP.NET 2.0 and beyond). After days of desperation, a simple search and replace solved the problem.
Option "Start debugging, Debug + Windows + Modules" does not exist in Microsoft Visual Studio Express 2013 edition.
Unchecking "Use Managed Compatibility Mode" in Tools Options Debugging fixes this.
Webapplications (IIS Express) only:
Rightclick IIS Express Tray and close the IIS.
Clean Solution
Clean solution and Rebuild
Check the configuration is set to Debug
Make sure that the PDB file is in the Debug folder it self
From Debug menu click Enable All Break points
Make sure you're in Debug and not is release by choosing debug in the dropdown menu like you can see in the picture below.
Then, try cleaning your project by clicking the right button in your mouse on the solution in the solution explorer window and choosing Clean solution.
Then rebuild your solution by clicking the right button in your mouse on the solution in the solution explorer window and choose Rebuild solution
Check are the following two setting the same in Visual Studio:
Right click test project, go to Properties, Build tab, and look at Platform target
Mine are all set to "Any CPU" so x64
On the Main Menu bar, go to Test, Test Settings, Default Processor Architecture
Mine was set to X86
Changing this to X64 to match above setting made the built in Visual Studio menu “Debug Test(s)” work and hit breakpoints that were previously ignored with the message “The breakpoint will not currently be hit. No symbols have been loaded for this document”.
Update:
For Visual Studio 2019 the menus have been moved around a bit:
I also had the same issue what I rebuild the whole solution (including refereced projects) in x86( or x64)
Even though I set all of my projects to x86 from Configuration Manager (Build->ConfigManager) some of my projects were not set to x86.
So Just to make sure right click on the project and follow
project -> properties -> Debug Tab, verify Configuration and Platform.
The .dll where I want to stop debugger and the associated .pdb files where copied near the .exe file. Those files had an older date so I thought they weren't updated in the runtime. I manually deleted them, Visual Studio create another pair AND put this new pair near the .exe. Now the breakpoint works!
Maybe Visual Studio cannot copy and REPLACE existing files (.dll and .pdb) near the .exe since there are another there. So if I deleted manually then VS could create new one near .exe.
I think that the root cause of the problem is that the Visual Studio use another file in runtime, no the file from the project, with the stop.
Instead of doing all these things just Close and reopen
Project Properties (then select your build config) > Build Tab > Advanced... > Debug Info (dropdown)
Set to 'all' or 'pdb-only' then rebuild
This took me a while tried other options above and for some strange reason debugging stopped working.
Tool -> Options -> Debugging -> General -> (untick) "Require source files to exactly match the original version" option
I was integrating a C# application with a static library using VS10 - which I'm new to. I wrote a managed code dll to interface them. I could set breakpoints everywhere but the static lib. I got the message described above - no symbols have been loaded for this document. I tried many of the suggestions above. I could see that the symbols weren't being loaded. I finally noticed a check box Configuration Debug, Enable unmanaged code debugging. That allowed me to set breakpoints in the static lib functions.
In my case, I was compiling a class library (DLL). No modules seem to be loaded in Debug -> Modules, so I couldn't even load the symbols manually.
My solution was to add this line to my code:
System.Diagnostics.Debugger.Launch();
Once this code is reached, an exception is triggered and .NET Framework shows a dialog box asking which Visual Studio (i.e. new instance of VS 2008, new instance of VS 2013, etc) you want to use to debug the program. You can choose the existing instance of VS with your project loaded. This will attach the process to your VS session and load all symbols, and now you can debug your project.
Of course, the compilation has to be done using the Debug configuration, not Release.
For an ASP.Net application, check the properties of the site, ASP.NET tab. Ensure that the correct ASP.NET version is selected.
I think the source if this error is, the debug symbols have a hard time surfacing to the solution after building for release.
I tried all the other answers -- generally, regenerating .pdb symbols or checking their location, cleaning and rebuilding project, ensuring active configuration is not Release etc.
What eventually worked for me is right-clicking on the project in solution explorer > Debug > Start new instance.
After trying a bunch of these, the thing that ultimately worked for me was this:
In Debug > Options > General, uncheck Enable Edit and Continue.
this happened to me after copy paste another webservice asmx file into an existing webservice, resulting in the same error when trying to debug the recently added service, to be able to debug I had to start without debug, then attach to the process. its weird but its the only way i found to be able to debug.
Been running into this problem lately... When debugging an app in VS.Net 2005, breakpoints are not connected. Error indicates that the compiled code is not the same as the running version and therefore there's a mismatch that causes the breakpoint to be disconnected.
Cleaned solution of all bin file and re-compile doesn't help. Not just happening on a single box or person either.
Added Note:
This solution is in TFS for Source Control. If I delete my local TFS repository and get it from source control from scratch, SOMETIMES the problem goes away. I've also tried un-installing and re-installed Visual Studio. That also SOMETIMES helps. That fact that both of those work some of the time indicates that the problem isn't caused by either directly.
Maybe this suggestion might help:
While debugging in Visual Studio, click on Debug > Windows > Modules. The IDE will dock a Modules window, showing all the modules that have been loaded for your project.
Look for your project's DLL, and check the Symbol Status for it.
If it says Symbols Loaded, then you're golden. If it says something like Cannot find or open the PDB file, right-click on your module, select Load Symbols, and browse to the path of your PDB.
I've found that it's sometimes necessary to:
stop the debugger
close the IDE
close the hosting application
nuke the obj and bin folders
restart the IDE
rebuild the project
go through the Modules window again
Once you browse to the location of your PDB file, the Symbol Status should change to Symbols Loaded, and you should now be able to set and catch a breakpoint at your line in code.
Source: The breakpoint will not currently be hit. No symbols have been loaded for this document.
http://dpotter.net/Technical/2009/05/upgrading-to-ie8-breaks-debugging-with-visual-studio-2005/
In Options -> Debugging you can uncheck "require source files to exactly match the original version", which may help.
Is the build configuration set to Release?
Do you have a reference to an external DLL where the breakpoint is set?
Are you creating a DLL project that is consumed by an external executable? Are you using .NET or COM?
If you are using the COM Interop with .NET, the DLL versions can sometimes be a problem when the executable loads the DLL. For instance, if your daily build cranks out an incrementing build number but your debug DLL has a smaller build number, the executable won't load the debug DLL. To fix this, you will need to scan the HKEY_CLASSES_ROOT\CLSID directory in your registry for the GUID/CLSID of your .NET/COM component. Under InProc32, delete entries with a higher version number than your debug DLL.
Again, the above only applies to .NET + COM Interop DLLs.
I've had a similar problem in the past.
It was solved by closing Visual Studio and deleting the temporary ASP.NET generated assembly files for the project under "C:\WINDOWS\Microsoft.NET\Framework{framework version}\Temporary ASP.NET Files", re-opening the project.
Read the post here and the comments to resolve it.
AviewAnew - had already done that at the request of the MS tech person. It didn't help to uncheck require source file to match version.
Mike L - configuration is set to DEBUG and there are now external DLL. Using all local projects except framework references.
Are you sure the .pdb files are in the same folder as the executable you are running? Make sure the last modified date of both files match, and that VS is attached to that exe (and no other).
Do you have a post build step that touches your binaries in any way? If so, this can confuse the debugger and make it look like your symbols don't match your exe/dll because of the incorrect size/timestamp.
In the past I have sometimes found that switching off compiler optimisations can solve 'missing' breakpoints, as the optimiser had determined (correctly) that the code was not being called, and removed them from the compiled versions.
This does sound like a different issue, but it might be worth making sure that optimisation is switched off in Debug mode. [Project / Properties, Build settings tab]
Sure there are no Debug attributes on the code that prevent code from being debugged, such as DebuggerHidden or DebuggerStepThrough, at any point of the application?
Can you step through your code up to the line of the breakpoint instead of running and waiting for it to hit? Can you step through code at all?