This has been plaguing me for the last few hours, I'm recieving the following error message on an ASP.NET web page:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
In the past to fix this I've found it was a simple connection string error, however I'm using Idera's Connection String generator tool. It seems to be able to connect to the server just fine when I test the string. I can connect with SQL Management Studio, as well as I can create a blank .udl file, fill in the details, and it connects without issue.
I've double checked, and the server is allowing remote connections, I turned the firewall off at this point (just trying to get this to work) and still no go.
Do you guys think I'm missing something ? Any help is GREATLY appreciated!
And when you try adding a connection from Visual Studio ?
You could also use the connection string that is generated by VS while doing this.
It seems as if you are missing the instance name or something like that.
Edit : Yes, as explained in the comment : Right click the connection, then copy the Connection string.
But you might have to replace the "name" by the IP address, if the resolution of the host name is not being performed correctly
From the web servercan you resolve the name of the server using in the connection string - i.e. is it a DNS issue?
Related
I've added to my .asp website a CreateUserWizard with destination page url home. After I'm launching it in Visual Studio 2013, it opens, I register, but, after a long delay after pressing sign up, it shows me this error:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
Should I create a database myself or how it can't locate the server?
I think that connection string for database is not correct. Try creating an empty database and add that connection string in web config.
The error is telling you it can't find the database you have specified in your connection string (perhaps a typo or an incorrect details)
this page will help you create the connection string. You will just need your server details
I have successfully created an Hybrid Connection between Azure and an on-premise resource. I see "Connected" in both the Azure Portal and Hybrid Connection Manager.
When I run my .NET code local in Visual Studio with the connection string "AppServer://MyPC:5162/AzureOeApi" everything runs fine but when I run it in Azure, I get a connection error (it can't see the on-prem end-point).
Do I need to change my connection string when running in Azure to force it to go through the Hybrid Connection or will it be handled automatically?
No need to change connection string.
We had similar issue - connection was "Connected", but no requests whould go through. You need to use fully qualified domain name in configuration of hybrid connection.
Please also read this question - similar question
I've been struggling with this problem for a whole day and finally I had a breakthrough: in my original connection string I was referring to [DB_SERVER]\[INSTANCE], having correctly configured the DB instance to listen to a given TCP port [PORT].
With this setup the Hybrid Connection was 'Connected' but I was getting the exception:
ExceptionMessage: The underlying provider failed on Open. -InnerExceptionMessage: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
It turns out that the connection string needs do explicitly refer to the port number (instead of the DB instance) using the syntax [DB_SERVER],[PORT] (mind the comma!).
Unfortunately Microsoft does not document this subtle detail....
I am getting the below error when I try to connect to SQL server from C# code
A network-related or instance-specific error occurred while
establishing a connection to SQL Server. The server was not found or
was not accessible. Verify that the instance name is correct and that
SQL Server is configured to allow remote connections. (provider: SQL
Network Interfaces, error: 26 - Error Locating Server/Instance
Specified)
My connection String looks like this
"Data Source={DatabaseServer};Initial
Catalog={DatabaseName};Integrated Security=SSPI;Enlist=false;"
I have tried all the option which I found in lots of articles but could not solve the issue. One more thing to note is my colleague is able to run the same code from his machine. So it is obviously not problem with SQL server. It has to do something with my machine.can anyone give me any pointers what could be the problem? I am able to connect to SQL server instance through SSMS.
What is the provider in your connection string? Something like
Data Source=SQLServerName;Initial Catalog=DatabaseName;Provider=SQLNCLI11.1;Integrated Security=SSPI;
Well I figured it out...Actually I am working on a remote machine and I created a new project in visual studio which gets created in remote drive by default. so it does not seems to find instance from remote drive but it works when I copy it to my local drive..
Since you can connect to your SQL server through SSMS and the error message looks like the connection string is wrong (or only working for some people somehow), you could compare the parameters SSMS uses in the connection dialog to those in your connection string in the C# code.
If you find any differences there, they could be the error you're looking for.
I've built an .asmx web service which retrieves informations from a local sql server 2014 database.
Everything is working fine on localhost, but after publishing the web service to Azure i get the error:
An unhandled exception of type 'System.Web.Services.Protocols.SoapException'
occurred in System.Web.Services.dll
Additional information: Server was unable to process request. ---> A
network-related or instance-specific error occurred while
establishing a connection to SQL Server. The server was not found or
was not accessible. Verify that the instance name is correct and that
SQL Server is configured to allow remote connections. (provider: SQL
Network Interfaces, error: 26 - Error Locating Server/Instance
Specified)
SQL Server is configured to allow remote connections.
My connection string is like:
string con2 = #"Data Source=OfficePc\MSSQLSERVER2014;Initial Catalog=Database;Persist Security Info=True;User ID=Admin;Password=123456";
Is the error the result of something missing from the connection string, or am i missing some configurations changes?
As Paul mentioned in a comment under the question, your connection string is pointing to a local database resource (presumably on your dev machine). Even though you configured your local database server to support remote connections, the address OfficePc\MSSQLSERVER2014 isn't addressable, as that does not equate to a machine address (IP address).
Your app would need to connect to your database via an accessible IP address (which might require you to do some port-forwarding on your local network, or open ports on your firewall).
Alternatively, you can migrate your database to Azure (either with SQL Server in a VM or with the SQL Database service).
Keep in mind: If you are accessing a local (on-premises) database server from Azure, there will be latency added, as well as some outbound bandwidth costs.
It looks like SQL Server instance is not running or not accessible. Try connecting to the same database using SSMS and if you get the same error then the instance is not running.
Mostly the error occurs when the Database server was not found. Recheck if the server name (Data Source) is mentioned correctly. If you manually generated the connection string use .uld file to generate connection string.
To auto generate connection string using .udl file:
Create a sampe.txt file.
Rename it as sample.udl file.
Then double click on it, It will show you window entitled 'Data Link Properties'.
Configure the connection there.
Then Test the connection using test connection button.
Then open the file with notepad. It will show you the exact connection string.
For further reference check : MSDN
I'm trying to connect to a database but nothing I try works.
SqlConnection conn = new SqlConnection(#"Data Source=C:\Users\Gerard Foley\Desktop\Northwind.sdf");
conn.Open();
No matter what I try I just get the error:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
I stole the connection string from Database Explorer -> Properties -> Connection String. What am I missing? I can get the tables to show up in a DataGridView fine (by dragging from Data Sources), but I want to use my own UI and queries. I just can't seem to figure this ADO thing out.
Using c# express 2010 and sql server express 2008.
for the proper connection string to use to connect to SQL Server have a look at:
http://connectionstrings.com
the connection string you are using now is strange, it should contain server name and database name, see link above for examples...
GOT IT. I should have been using Sql*Ce*Connection. The connection string was fine.
You need to specify 'AttachDbFileName' in the connection string. See the examples for sql server express here: http://www.connectionstrings.com/sql-server-2008.