I have a c# application that uses a background worker thread, and quite successfully updates the UI from the running thread. The application involves shortest path routing on a network, and I display the network and the shortest path, on the UI, as the background worker proceeds. I would like to allow the user to slow down the display through use of a slider, while the application is running.
I found this as a suggestion, but it is in vb.net, I am not clear on how to get it to work in c#.
How can the BackgroundWorker get values from the UI thread while it is running?
I can pass the value of the slider to the backgroundworker as follows:
// Start the asynchronous operation.
delay = this.trackBar1.Value;
backgroundWorker1.RunWorkerAsync(delay);
and use it within the backgroundworker thread, but it only uses the initially-sent value. I am not clear on how to pick up the value from inside the backgroundworker when I move the slider on the UI.
I have previously used multiple threads and delegates, but if it is possible to utilize the background worker, I would prefer it for its simplicity.
5/10/2012
Thanks to all for your responses. I am still having problems, most likely because of how I have structured things. The heavy duty calculations for network routing are done in the TransportationDelayModel class. BackgroundWorker_DoWork creates an instance of this class, and then kicks it off. The delay is handled in TransportationDelayModel.
The skeleton of code is as follows:
In UI:
private void runToolStripMenuItem1_Click(object sender, EventArgs e)
{
if (sqliteFileName.Equals("Not Set"))
{
MessageBox.Show("Database Name Not Set");
this.chooseDatabaseToolStripMenuItem_Click(sender, e);
}
if (backgroundWorker1.IsBusy != true)
{
// Start the asynchronous operation.
delay = this.trackBar1.Value;
// pass the initial value of delay
backgroundWorker1.RunWorkerAsync(delay);
// preclude multiple runs
runToolStripMenuItem1.Enabled = false;
toolStripButton2.Enabled = false;
}
}
private void backgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
{
BackgroundWorker worker = sender as BackgroundWorker;
if (!backgroundWorkerLaunched)
{
// instantiate the object that does all the heavy work
TransportationDelayModel TDM = new TransportationDelayModel(worker, e);
// kick it off
TDM.Run(sqliteFileName, worker, e);
backgroundWorkerLaunched = true;
}
}
The TransportationDelayModel constructor is:
public TransportationDelayModel(BackgroundWorker worker, DoWorkEventArgs e)
{
listCentroids = new List<RoadNode>();
listCentroidIDs = new List<int>();
listNodes = new List<RoadNode>();
listNodeIDs = new List<int>();
listRoadLink = new List<RoadLink>();
roadGraph = new AdjacencyGraph<int, RoadLink>(true); // note parallel edges allowed
tdmWorker = worker;
tdmEvent = e;
networkForm = new NetworkForm();
}
so I have the tdmWorker, which allows me to pass information back to the UI.
In the internal calculations in TransportationDelayModel, I sleep for the delay period
if (delay2 > 0)
{
tdmWorker.ReportProgress(-12, zzz);
System.Threading.Thread.Sleep(delay2);
}
so the problem seems to be how to pass an updated slider value from the UI back to the object that is executing in the background worker. I have tried a number of combinations, sort of thrashing around, to no avail, either nothing happens or I get a message about not being allowed to access what is happening on the other thread. I realize that if I were doing all the work in the DoWork event handler, then I should be able to do things as you suggest, but there is too much complexity for that to happen.
Again, thank you for your suggestions and help.
6/2/2012
I have resolved this problem by two methods, but I have some questions. Per my comment to R. Harvey, I have built a simple application. It consists of a form with a run button, a slider, and a rich text box. The run button launches a background worker thread that instantiates an object of class "Model" that does all the work (a simplified surrogate for my TransportationModel). The Model class simply writes 100 lines to the text box, incrementing the number of dots in each line by 1, with a delay between each line based on the setting of the slider, and the slider value at the end of the line, something like this:
....................58
.....................58
......................58
.......................51
........................44
.........................44
The objective of this exercise is to be able to move the slider on the form while the "Model" is running, and get the delay to change (as in above).
My first solution involves the creation of a Globals class, to hold the value of the slider:
class Globals
{
public static int globalDelay;
}
then, in the form, I update this value whenever the trackbar is scrolled:
private void trackBar1_Scroll(object sender, EventArgs e)
{
Globals.globalDelay = this.trackBar1.Value;
}
and in the Model, I just pick up the value of the global:
public void Run(BackgroundWorker worker, DoWorkEventArgs e)
{
for (int i = 1; i < 100; i++)
{
delay = Globals.globalDelay; // revise delay based on static global set on UI
System.Threading.Thread.Sleep(delay);
worker.ReportProgress(i);
string reportString = ".";
for (int k = 0; k < i; k++)
{
reportString += ".";
}
reportString += delay.ToString();
worker.ReportProgress(-1, reportString);
}
}
}
This works just fine.
My question: are there any drawbacks to this approach, which seems very simple to implement and quite general.
The second approach, based on suggestions by R. Harvey, makes use of delegates and invoke.
I create a class for delegates:
public class MyDelegates
{
public delegate int DelegateCheckTrackBarValue(); // create the delegate here
}
in the form, I create:
public int CheckTrackBarValue()
{
return this.trackBar1.Value;
}
and the Model class now has a member m_CheckTrackBarValue
public class Model
{
#region Members
Form1 passedForm;
public static MyDelegates.DelegateCheckTrackBarValue m_CheckTrackBarValue=null;
#endregion Members
#region Constructor
public Model(BackgroundWorker worker, DoWorkEventArgs e, Form1 form)
{
passedForm = form;
}
When the background thread is launched by the run button, the calling form is passed
private void button1_Click(object sender, EventArgs e)
{
if (backgroundWorker1.IsBusy != true)
{
backgroundWorker1.RunWorkerAsync();
}
}
private void backgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
{
BackgroundWorker worker = sender as BackgroundWorker;
if (!backgroundWorkerLaunched)
{
// instantiate the object that does all the heavy work
Model myModel= new Model(worker, e, this);
Model.m_CheckTrackBarValue = new MyDelegates.DelegateCheckTrackBarValue(this.CheckTrackBarValue);
// kick it off
myModel.Run(worker, e);
backgroundWorkerLaunched = true;
}
}
Finally, in the Model, the Invoke method is called on the passed form to get the value of the trackbar.
public void Run(BackgroundWorker worker, DoWorkEventArgs e)
{
for (int i = 1; i < 100; i++)
{
int delay = (int)passedForm.Invoke(m_CheckTrackBarValue,null); // invoke the method, note need the cast here
System.Threading.Thread.Sleep(delay);
worker.ReportProgress(i);
string reportString = ".";
for (int k = 0; k < i; k++)
{
reportString += ".";
}
reportString += delay.ToString();
worker.ReportProgress(-1, reportString);
}
}
This works as well. I kept getting an error until I made the member variable static, e.g.
public static MyDelegates.DelegateCheckTrackBarValue m_CheckTrackBarValue=null;
My questions on this solution: Are there advantages to this solution as regards to the previous version? Am I making things too complicated in the way I have implemented this? Why does m_CheckTrackBarValue need to be static.
I apologize for the length of this edit, but I thought that the problem and solutions might be of interest to others.
You have to pass the TrackBar object to the BackgroundWorker, not delay. delay doesn't change once you set it.
To simplify the needed Invoke(), you can use a helper method, such as this one:
Async.UI(delegate { textBox1.Text = "This is way easier!"; }, textBox1, true);
I will assume that you are already familiarized with cross-thread invocation to update the UI. So, the solution is very simple: in your worker thread, after each iteration, invoke the UI to get the slider thumb position.
To use a backgroundworker, you add a method to the DoWork property, like this:
this.backgroundWorker1.WorkerSupportsCancellation = true;
this.backgroundWorker1.DoWork += new System.ComponentModel.DoWorkEventHandler(this.backgroundWorker1_DoWork);
this.backgroundWorker1.RunWorkerCompleted += new System.ComponentModel.RunWorkerCompletedEventHandler(this.backgroundWorker1_RunWorkerCompleted);
In the DoWork method, you need to check the variable where the updated delay is set.
This could be an integer field that is available on the containing Form or UI control, or it could be the TrackBar itself.
Related
I have an application with a gui and a Rich Text Box where I output what the program is currently doing since data processing can be quite long.
I tried two approaches for that:
1 In the Backgroundworker method I can just call the following code fine:
GlobalVar.backgroundWorkerAppendText = task.Build_CSV_List();
Processchange();
Whereas I cannot use Form1.Processchange(); in the helper class due to the non static context
2 Therefore I tried to create my very first eventhandler.
The Idea was that helper.UpdateConsole() would raise an event
public event EventHandler OnConsoleUpdate;
public void Consoleupdate()
{
OnConsoleUpdate(this, EventArgs.Empty);
}
to which the Backgroundworker listens and then calls Processchange from its context
public void BackgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
{
StandardTasks task = new StandardTasks();
Helper helper = new Helper();
helper.OnConsoleUpdate += Processchange;
task.DoSomeStuffHere()
}
public void Processchange(object sender=null, EventArgs e=null)
{
//MessageBox.Show(GlobalVar.backgroundWorkerAppendText);
GlobalVar.next = false;
backgroundWorker1.ReportProgress(1);
while (GlobalVar.next == false)
{
helper.TimeBreaker(100,"ms");
}
}
Unfortunately this was was not successful. As soon as rising the Event I get the errormessage System.NullReferenceException which -after googling- leads me to the conclusion that there is no listerner attached to the event eventhouh I attached it in the Backgroundworker Do work.
Edit: the OnConsoleUpdate() == null as shown on the screenshot below
event = null
The helper is in another class file "helpers" which might be important for a solution.
i hope you guys can help me out.
Welcome to SO!
A few things immediately jump to mind.
First, let's get the event issue out of the way. You've got the correct approach - you need an event and method to call it, but that method should check if the event is null.
Basically, do this:
public event EventHandler OnConsoleUpdate;
public void ConsoleUpdate()
{
OnConsoleUpdate?.Invoke(this, EventArgs.Empty);
}
The above makes use of ?, a null-condition operator. You can read more about it on this MSDN page.
Second thing... it's unclear what your background worker actually IS. It sounds like it's some kind of custom class you crated? The reason it's important is because .NET actually has a BackgroundWorker class used for running operations... well, in the background. It also has an OnProgressChanged event which you can hook up to which could be used to update the UI (just remember to set the WorkerReportsProgress property to true). And to use the BackgroundWorker mentioned above, you shouldn't need to create any events of your own.
Here's how you can use the standard .NET BackgroundWorker:
System.ComponentModel.BackgroundWorker worker = new System.ComponentModel.BackgroundWorker();
void StartBackgroundTask()
{
worker.DoWork += worker_DoWork;
//if it's possible to display progress, use this
worker.WorkerReportsProgress = true;
worker.ProgressChanged += worker_ProgressChanged;
//what to do when the method finishes?
worker.RunWorkerCompleted += worker_RunWorkerCompleted;
//start!
worker.RunWorkerAsync();
}
void worker_RunWorkerCompleted(object sender, System.ComponentModel.RunWorkerCompletedEventArgs e)
{
//perform any "finalization" operations, like re-enable disabled buttons
//display the result using the data in e.Result
//this code will be running in the UI thread
}
//example of a container class to pass more data in the ReportProgress event
public class ProgressData
{
public string OperationDescription { get; set; }
public int CurrentResult { get; set; }
//feel free to add more stuff here
}
void worker_ProgressChanged(object sender, System.ComponentModel.ProgressChangedEventArgs e)
{
//display the progress using e.ProgressPercentage or e.UserState
//this code will be running in the UI thread
//UserState can be ANYTHING:
//var data = (ProgressData)e.UserState;
}
void worker_DoWork(object sender, System.ComponentModel.DoWorkEventArgs e)
{
//this code will NOT be running in the UI thread!
//you should NOT call the UI thread from this method
int result = 1;
//perform calculations
for (var i = 1; i <= 10; i++)
{
worker.ReportProgress(i, new ProgressData(){ OperationDescription = "CustomState passed as second, optional parameter", CurrentResult = result });
System.Threading.Thread.Sleep(TimeSpan.FromSeconds(5));
result *= i;
}
e.Result = result;
}
Now, the thing about the BackgroundWorker class is that it is rather old, and with current .NET versions you can use the async / await keywords to easily handle background operations and UI updates, but this probably is going outside the bounds of this question. That said, the existence of async / await doesn't invalidate the use of BackgroundWorker which is pretty simple in its usage.
There's one more worrisome thing in your code.
public void BackgroundWorker1_DoWork(object sender, DoWorkEventArgs e)
{
StandardTasks task = new StandardTasks(); //<- you create a task
Helper helper = new Helper(); // <- you create a helper
helper.OnConsoleUpdate += Processchange; // <- you hook up to the helper event
task.DoSomeStuffHere(); // <- you do stuff with the task... but the task doesn't know about your helper above! Does `StandardTasks` use `Helper`? If so, how?
}
Do note that events, unless made static, aren't global. So hooking up to an event in one instance of a class won't cause another instance of that class to "fire" that event. It seems one way to fix your issues would be to make the StandardTasks class take Helper as one of the constructor parameters, so the code would look like this:
Helper helper = new Helper(); // <- you create a helper
helper.OnConsoleUpdate += Processchange; // <- you hook up to the helper class event to actually do something
StandardTasks task = new StandardTasks(helper); //<- you create a task which will use the helper with the hooked up event above
I have some controls on the form of the Windows Forms application and I need to update its' texts at run-time from several threads.
Is it safe to just call BeginInvoke method like this:
BeginInvoke((MethodInvoker)delegate()
{
this.label.Text = "Some text";
});
from several threads at the same time? Should I do any additional synchronization in this case? Will it be processed by the same thread one by one and is this order guaranteed?
Thanks in advance.
Calling BeginInvoke puts the delegate on to the message queue to be processed by the UI thread, it will process the queue handling the messages one by one. So no, you do not need to do any additional synchronization (as long as the delegate is not accessing any resources that can't be accessed from the UI thread).
As for order, it is not guaranteed they will be processed in order but in practice most of the time the delegates will be processed in the order they where put in to the queue.
To address the question in the comments, instead of using multiple BeginInvoke calls you should be able to get away with just one.
You never really explained what your animation was so I am going to assume it is going to be that this.label will swap between ., .. and ... then you store the result text in this.label when you are done.
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
animationTimer = new System.Windows.Forms.Timer();
animationTimer.Interval = 500;
animationTimer.Tick += animationTimer_Tick;
}
private System.Windows.Forms.Timer animationTimer;
private int dots = 0;
void animationTimer_Tick(object sender, EventArgs e)
{
//Make 1, 2, or 3 dots show up. This runs on the UI thread so we don't need to invoke.
this.label.Text = new String('.', dots + 1);
//Add one then reset to 0 if we reach 3.
dots += 1;
dots = dots % 3;
}
private void button1_Click(object sender, EventArgs e)
{
animationTimer.Start();
Task.Run(() => DoSomeSlowCalcuation());
}
private void DoSomeSlowCalcuation()
{
Thread.Sleep(5000);
this.BeginInvoke((MethodInvoker)delegate()
{
//We stop the timer before we set the text so the timer will not overwrite it.
animationTimer.Stop();
this.label.Text = "Some text";
});
}
}
This code is just a example to get my point across, if I where doing this I would use async/await for the button click and not use BeginInvoke at all.
private async void button1_Click(object sender, EventArgs e)
{
animationTimer.Start();
var result = await Task.Run(() => DoSomeSlowCalcuation());
animationTimer.Stop();
this.label.Text = result;
}
private string DoSomeSlowCalcuation()
{
Thread.Sleep(5000);
return "Some text";
}
Fairly frustrating since this seems to be well documented and the fact that I accomplished this before, but can't duplicate the same success. Sorry, I'll try to relate it all clearly.
Visual Studio, C# Form, One Main Form has text fields, among other widgets.
At one point we have the concept that we are "running" and therefore gathering data.
For the moment, I started a one second timer so that I can update simulated data into some fields. Eventually that one second timer will take the more rapid data and update it only once per second to the screen, that's the request for the application right now we update at the rate we receive which is a little over 70 Hz, they don't want it that way. In addition some other statistics will be computed and those should be the field updates. Therefore being simple I'm trying to just generate random data and update those fields at the 1 Hz rate. And then expand from that point.
Definition and management of the timer: (this is all within the same class MainScreen)
System.Timers.Timer oneSecondTimer;
public UInt32 run_time = 0;
public int motion = 5;
private void InitializeTimers()
{
this.oneSecondTimer = new System.Timers.Timer(1000);
this.oneSecondTimer.Elapsed += new System.Timers.ElapsedEventHandler(oneSecondTimer_elapsed);
}
public void start_one_second_timer()
{
run_time = 0;
oneSecondTimer.Enabled = true;
}
public void stop_one_second_timer()
{
oneSecondTimer.Enabled = false;
run_time = 0;
}
Random mot = new Random();
private void oneSecondTimer_elapsed(object source, System.Timers.ElapsedEventArgs e)
{
run_time++;
motion = mot.Next(1, 10);
this.oneSecondThread = new Thread(new ThreadStart(this.UpdateTextFields));
this.oneSecondThread.Start();
}
private void UpdateTextFields()
{
this.motionDisplay.Text = this.motion.ToString();
}
motionDisplay is just a textbox in my main form. I get the Invalid Operation Exception pointing me towards the help on how to make Thread-Safe calls. I also tried backgroundworker and end up with the same result. The details are that motionDisplay is accessed from a thread other than the thread it was created on.
So looking for some suggestions as to where my mistakes are.
Best Regards. I continue to iterate on this and will update if I find a solution.
Use a System.Forms.Timer rather than a System.Timers.Timer. It will fire it's elapsed event in the UI thread.
Don't create a new thread to update the UI; just do the update in the elapsed event handler.
Try this
private void UpdateTextFields()
{
this.BeginInvoke(new EventHandler((s,e)=>{
this.motionDisplay.Text = this.motion.ToString();
}));
}
This will properly marshall a call back to the main thread.
The thing with WinForm development is that all the controls are not thread safe. Even getting a property such as .Text from another thread can cause these type of errors to happen. To make it even more frustrating is that sometimes it will work at runtime and you won't get an exception, other times you will.
This is how I do it:
private delegate void UpdateMotionDisplayCallback(string text);
private void UpdateMotionDisplay(string text) {
// InvokeRequired required compares the thread ID of the
// calling thread to the thread ID of the creating thread.
// If these threads are different, it returns true.
if (this.motionDisplay.InvokeRequired) {
UpdateMotionDisplayCallback d = new UpdateMotionDisplayCallback(UpdateMotionDisplay);
this.Invoke(d, new object[] { text });
} else {
this.motionDisplay.Text = text;
}
}
When you want to update the text in motionDisplay just call:
UpdateMotionDisplay(this.motion.ToString())
I am currently writing my first program on C# and I am extremely new to the language (used to only work with C so far). I have done a lot of research, but all answers were too general and I simply couldn't get it t work.
So here my (very common) problem:
I have a WPF application which takes inputs from a few textboxes filled by the user and then uses that to do a lot of calculations with them. They should take around 2-3 minutes, so I would like to update a progress bar and a textblock telling me what the current status is.
Also I need to store the UI inputs from the user and give them to the thread, so I have a third class, which I use to create an object and would like to pass this object to the background thread.
Obviously I would run the calculations in another thread, so the UI doesn't freeze, but I don't know how to update the UI, since all the calculation methods are part of another class.
After a lot of reasearch I think the best method to go with would be using dispatchers and TPL and not a backgroundworker, but honestly I am not sure how they work and after around 20 hours of trial and error with other answers, I decided to ask a question myself.
Here a very simple structure of my program:
public partial class MainWindow : Window
{
public MainWindow()
{
Initialize Component();
}
private void startCalc(object sender, RoutedEventArgs e)
{
inputValues input = new inputValues();
calcClass calculations = new calcClass();
try
{
input.pota = Convert.ToDouble(aVar.Text);
input.potb = Convert.ToDouble(bVar.Text);
input.potc = Convert.ToDouble(cVar.Text);
input.potd = Convert.ToDouble(dVar.Text);
input.potf = Convert.ToDouble(fVar.Text);
input.potA = Convert.ToDouble(AVar.Text);
input.potB = Convert.ToDouble(BVar.Text);
input.initStart = Convert.ToDouble(initStart.Text);
input.initEnd = Convert.ToDouble(initEnd.Text);
input.inita = Convert.ToDouble(inita.Text);
input.initb = Convert.ToDouble(initb.Text);
input.initc = Convert.ToDouble(initb.Text);
}
catch
{
MessageBox.Show("Some input values are not of the expected Type.", "Wrong Input", MessageBoxButton.OK, MessageBoxImage.Error);
}
Thread calcthread = new Thread(new ParameterizedThreadStart(calculations.testMethod);
calcthread.Start(input);
}
public class inputValues
{
public double pota, potb, potc, potd, potf, potA, potB;
public double initStart, initEnd, inita, initb, initc;
}
public class calcClass
{
public void testmethod(inputValues input)
{
Thread.CurrentThread.Priority = ThreadPriority.Lowest;
int i;
//the input object will be used somehow, but that doesn't matter for my problem
for (i = 0; i < 1000; i++)
{
Thread.Sleep(10);
}
}
}
I would be very grateful if someone had a simple explanation how to update the UI from inside the testmethod. Since I am new to C# and object oriented programming, too complicated answers I will very likely not understand, I'll do my best though.
Also if someone has a better idea in general (maybe using backgroundworker or anything else) I am open to see it.
First you need to use Dispatcher.Invoke to change the UI from another thread and to do that from another class, you can use events.
Then you can register to that event(s) in the main class and Dispatch the changes to the UI and in the calculation class you throw the event when you want to notify the UI:
class MainWindow : Window
{
private void startCalc()
{
//your code
CalcClass calc = new CalcClass();
calc.ProgressUpdate += (s, e) => {
Dispatcher.Invoke((Action)delegate() { /* update UI */ });
};
Thread calcthread = new Thread(new ParameterizedThreadStart(calc.testMethod));
calcthread.Start(input);
}
}
class CalcClass
{
public event EventHandler ProgressUpdate;
public void testMethod(object input)
{
//part 1
if(ProgressUpdate != null)
ProgressUpdate(this, new YourEventArgs(status));
//part 2
}
}
UPDATE:
As it seems this is still an often visited question and answer I want to update this answer with how I would do it now (with .NET 4.5) - this is a little longer as I will show some different possibilities:
class MainWindow : Window
{
Task calcTask = null;
void buttonStartCalc_Clicked(object sender, EventArgs e) { StartCalc(); } // #1
async void buttonDoCalc_Clicked(object sender, EventArgs e) // #2
{
await CalcAsync(); // #2
}
void StartCalc()
{
var calc = PrepareCalc();
calcTask = Task.Run(() => calc.TestMethod(input)); // #3
}
Task CalcAsync()
{
var calc = PrepareCalc();
return Task.Run(() => calc.TestMethod(input)); // #4
}
CalcClass PrepareCalc()
{
//your code
var calc = new CalcClass();
calc.ProgressUpdate += (s, e) => Dispatcher.Invoke((Action)delegate()
{
// update UI
});
return calc;
}
}
class CalcClass
{
public event EventHandler<EventArgs<YourStatus>> ProgressUpdate; // #5
public TestMethod(InputValues input)
{
//part 1
ProgressUpdate.Raise(this, status); // #6 - status is of type YourStatus
// alternative version to the extension for C# 6+:
ProgressUpdate?.Invoke(this, new EventArgs<YourStatus>(status));
//part 2
}
}
static class EventExtensions
{
public static void Raise<T>(this EventHandler<EventArgs<T>> theEvent,
object sender, T args)
{
if (theEvent != null)
theEvent(sender, new EventArgs<T>(args));
}
}
#1) How to start the "synchronous" calculations and run them in the background
#2) How to start it "asynchronous" and "await it": Here the calculation is executed and completed before the method returns, but because of the async/await the UI is not blocked (BTW: such event handlers are the only valid usages of async void as the event handler must return void - use async Task in all other cases)
#3) Instead of a new Thread we now use a Task. To later be able to check its (successfull) completion we save it in the global calcTask member. In the background this also starts a new thread and runs the action there, but it is much easier to handle and has some other benefits.
#4) Here we also start the action, but this time we return the task, so the "async event handler" can "await it". We could also create async Task CalcAsync() and then await Task.Run(() => calc.TestMethod(input)).ConfigureAwait(false); (FYI: the ConfigureAwait(false) is to avoid deadlocks, you should read up on this if you use async/await as it would be to much to explain here) which would result in the same workflow, but as the Task.Run is the only "awaitable operation" and is the last one we can simply return the task and save one context switch, which saves some execution time.
#5) Here I now use a "strongly typed generic event" so we can pass and receive our "status object" easily
#6) Here I use the extension defined below, which (aside from ease of use) solve the possible race condition in the old example. There it could have happened that the event got null after the if-check, but before the call if the event handler was removed in another thread at just that moment. This can't happen here, as the extensions gets a "copy" of the event delegate and in the same situation the handler is still registered inside the Raise method.
I am going to throw you a curve ball here. If I have said it once I have said it a hundred times. Marshaling operations like Invoke or BeginInvoke are not always the best methods for updating the UI with worker thread progress.
In this case it usually works better to have the worker thread publish its progress information to a shared data structure that the UI thread then polls at regular intervals. This has several advantages.
It breaks the tight coupling between the UI and worker thread that Invoke imposes.
The UI thread gets to dictate when the UI controls get updated...the way it should be anyway when you really think about it.
There is no risk of overrunning the UI message queue as would be the case if BeginInvoke were used from the worker thread.
The worker thread does not have to wait for a response from the UI thread as would be the case with Invoke.
You get more throughput on both the UI and worker threads.
Invoke and BeginInvoke are expensive operations.
So in your calcClass create a data structure that will hold the progress information.
public class calcClass
{
private double percentComplete = 0;
public double PercentComplete
{
get
{
// Do a thread-safe read here.
return Interlocked.CompareExchange(ref percentComplete, 0, 0);
}
}
public testMethod(object input)
{
int count = 1000;
for (int i = 0; i < count; i++)
{
Thread.Sleep(10);
double newvalue = ((double)i + 1) / (double)count;
Interlocked.Exchange(ref percentComplete, newvalue);
}
}
}
Then in your MainWindow class use a DispatcherTimer to periodically poll the progress information. Configure the DispatcherTimer to raise the Tick event on whatever interval is most appropriate for your situation.
public partial class MainWindow : Window
{
public void YourDispatcherTimer_Tick(object sender, EventArgs args)
{
YourProgressBar.Value = calculation.PercentComplete;
}
}
You're right that you should use the Dispatcher to update controls on the UI thread, and also right that long-running processes should not run on the UI thread. Even if you run the long-running process asynchronously on the UI thread, it can still cause performance issues.
It should be noted that Dispatcher.CurrentDispatcher will return the dispatcher for the current thread, not necessarily the UI thread. I think you can use Application.Current.Dispatcher to get a reference to the UI thread's dispatcher if that's available to you, but if not you'll have to pass the UI dispatcher in to your background thread.
Typically I use the Task Parallel Library for threading operations instead of a BackgroundWorker. I just find it easier to use.
For example,
Task.Factory.StartNew(() =>
SomeObject.RunLongProcess(someDataObject));
where
void RunLongProcess(SomeViewModel someDataObject)
{
for (int i = 0; i <= 1000; i++)
{
Thread.Sleep(10);
// Update every 10 executions
if (i % 10 == 0)
{
// Send message to UI thread
Application.Current.Dispatcher.BeginInvoke(
DispatcherPriority.Normal,
(Action)(() => someDataObject.ProgressValue = (i / 1000)));
}
}
}
Everything that interacts with the UI must be called in the UI thread (unless it is a frozen object). To do that, you can use the dispatcher.
var disp = /* Get the UI dispatcher, each WPF object has a dispatcher which you can query*/
disp.BeginInvoke(DispatcherPriority.Normal,
(Action)(() => /*Do your UI Stuff here*/));
I use BeginInvoke here, usually a backgroundworker doesn't need to wait that the UI updates. If you want to wait, you can use Invoke. But you should be careful not to call BeginInvoke to fast to often, this can get really nasty.
By the way, The BackgroundWorker class helps with this kind of taks. It allows Reporting changes, like a percentage and dispatches this automatically from the Background thread into the ui thread. For the most thread <> update ui tasks the BackgroundWorker is a great tool.
If this is a long calculation then I would go background worker. It has progress support. It also has support for cancel.
http://msdn.microsoft.com/en-us/library/cc221403(v=VS.95).aspx
Here I have a TextBox bound to contents.
private void backgroundWorker_RunWorkerCompleted(object sender, RunWorkerCompletedEventArgs e)
{
Debug.Write("backgroundWorker_RunWorkerCompleted");
if (e.Cancelled)
{
contents = "Cancelled get contents.";
NotifyPropertyChanged("Contents");
}
else if (e.Error != null)
{
contents = "An Error Occured in get contents";
NotifyPropertyChanged("Contents");
}
else
{
contents = (string)e.Result;
if (contentTabSelectd) NotifyPropertyChanged("Contents");
}
}
You are going to have to come back to your main thread (also called UI thread) in order to update the UI.
Any other thread trying to update your UI will just cause exceptions to be thrown all over the place.
So because you are in WPF, you can use the Dispatcher and more specifically a beginInvoke on this dispatcher. This will allow you to execute what needs done (typically Update the UI) in the UI thread.
You migh also want to "register" the UI in your business, by maintaining a reference to a control/form, so you can use its dispatcher.
Thank God, Microsoft got that figured out in WPF :)
Every Control, like a progress bar, button, form, etc. has a Dispatcher on it. You can give the Dispatcher an Action that needs to be performed, and it will automatically call it on the correct thread (an Action is like a function delegate).
You can find an example here.
Of course, you'll have to have the control accessible from other classes, e.g. by making it public and handing a reference to the Window to your other class, or maybe by passing a reference only to the progress bar.
Felt the need to add this better answer, as nothing except BackgroundWorker seemed to help me, and the answer dealing with that thus far was woefully incomplete. This is how you would update a XAML page called MainWindow that has an Image tag like this:
<Image Name="imgNtwkInd" Source="Images/network_on.jpg" Width="50" />
with a BackgroundWorker process to show if you are connected to the network or not:
using System.ComponentModel;
using System.Windows;
using System.Windows.Controls;
public partial class MainWindow : Window
{
private BackgroundWorker bw = new BackgroundWorker();
public MainWindow()
{
InitializeComponent();
// Set up background worker to allow progress reporting and cancellation
bw.WorkerReportsProgress = true;
bw.WorkerSupportsCancellation = true;
// This is your main work process that records progress
bw.DoWork += new DoWorkEventHandler(SomeClass.DoWork);
// This will update your page based on that progress
bw.ProgressChanged += new ProgressChangedEventHandler(bw_ProgressChanged);
// This starts your background worker and "DoWork()"
bw.RunWorkerAsync();
// When this page closes, this will run and cancel your background worker
this.Closing += new CancelEventHandler(Page_Unload);
}
private void bw_ProgressChanged(object sender, ProgressChangedEventArgs e)
{
BitmapImage bImg = new BitmapImage();
bool connected = false;
string response = e.ProgressPercentage.ToString(); // will either be 1 or 0 for true/false -- this is the result recorded in DoWork()
if (response == "1")
connected = true;
// Do something with the result we got
if (!connected)
{
bImg.BeginInit();
bImg.UriSource = new Uri("Images/network_off.jpg", UriKind.Relative);
bImg.EndInit();
imgNtwkInd.Source = bImg;
}
else
{
bImg.BeginInit();
bImg.UriSource = new Uri("Images/network_on.jpg", UriKind.Relative);
bImg.EndInit();
imgNtwkInd.Source = bImg;
}
}
private void Page_Unload(object sender, CancelEventArgs e)
{
bw.CancelAsync(); // stops the background worker when unloading the page
}
}
public class SomeClass
{
public static bool connected = false;
public void DoWork(object sender, DoWorkEventArgs e)
{
BackgroundWorker bw = sender as BackgroundWorker;
int i = 0;
do
{
connected = CheckConn(); // do some task and get the result
if (bw.CancellationPending == true)
{
e.Cancel = true;
break;
}
else
{
Thread.Sleep(1000);
// Record your result here
if (connected)
bw.ReportProgress(1);
else
bw.ReportProgress(0);
}
}
while (i == 0);
}
private static bool CheckConn()
{
bool conn = false;
Ping png = new Ping();
string host = "SomeComputerNameHere";
try
{
PingReply pngReply = png.Send(host);
if (pngReply.Status == IPStatus.Success)
conn = true;
}
catch (PingException ex)
{
// write exception to log
}
return conn;
}
}
For more information: https://msdn.microsoft.com/en-us/library/cc221403(v=VS.95).aspx
I have a form with 2 comboboxes on it. And I want to fill combobox2.DataSource based on combobox1.Text and combobox2.Text (I assume that the user has completed input in combobox1 and is in the middle of inputting in combobox2). So I have an event handler for combobox2 like this:
private void combobox2_TextChanged(object sender, EventArgs e)
{
if (cmbDataSourceExtractor.IsBusy)
cmbDataSourceExtractor.CancelAsync();
var filledComboboxValues = new FilledComboboxValues{ V1 = combobox1.Text,
V2 = combobox2.Text};
cmbDataSourceExtractor.RunWorkerAsync(filledComboboxValues );
}
As far as building DataSource is time-consuming process (it creates a request to database and executes it) I decided that it's better to perform it in another process using BackgroundWorker. So there's a scenario when cmbDataSourceExtractor hasn't completed its work and the user types one more symbol. In this case I get an exception on this line
cmbDataSourceExtractor.RunWorkerAsync(filledComboboxValues ); about that BackgroundWorker is busy and cannot perform several actions in the same time.
How to get rid of this exception?
CancelAsync doesn't actually abort your thread or anything like that. It sends a message to the worker thread that work should be cancelled via BackgroundWorker.CancellationPending. Your DoWork delegate that is being run in the background must periodically check this property and handle the cancellation itself.
The tricky part is that your DoWork delegate is probably blocking, meaning that the work you do on your DataSource must complete before you can do anything else (like check for CancellationPending). You may need to move your actual work to yet another async delegate (or maybe better yet, submit the work to the ThreadPool), and have your main worker thread poll until this inner worker thread triggers a wait state, OR it detects CancellationPending.
http://msdn.microsoft.com/en-us/library/system.componentmodel.backgroundworker.cancelasync.aspx
http://www.codeproject.com/KB/cpp/BackgroundWorker_Threads.aspx
If you add a loop between the CancelAsync() and the RunWorkerAsync() like so it will solve your problem
private void combobox2_TextChanged(object sender, EventArgs e)
{
if (cmbDataSourceExtractor.IsBusy)
cmbDataSourceExtractor.CancelAsync();
while(cmbDataSourceExtractor.IsBusy)
Application.DoEvents();
var filledComboboxValues = new FilledComboboxValues{ V1 = combobox1.Text,
V2 = combobox2.Text};
cmbDataSourceExtractor.RunWorkerAsync(filledComboboxValues );
}
The while loop with the call to Application.DoEvents() will hault the execution of your new worker thread until the current one has properly cancelled, keep in mind you still need to handle the cancellation of your worker thread. With something like:
private void cmbDataSourceExtractor_DoWork(object sender, DoWorkEventArgs e)
{
if (this.cmbDataSourceExtractor.CancellationPending)
{
e.Cancel = true;
return;
}
// do stuff...
}
The Application.DoEvents() in the first code snippet will continue to process your GUI threads message queue so the even to cancel and update the cmbDataSourceExtractor.IsBusy property will still be processed (if you simply added a continue instead of Application.DoEvents() the loop would lock the GUI thread into a busy state and would not process the event to update the cmbDataSourceExtractor.IsBusy)
You will have to use a flag shared between the main thread and the BackgroundWorker, such as BackgroundWorker.CancellationPending. When you want the BackgroundWorker to exit, just set the flag using BackgroundWorker.CancelAsync().
MSDN has a sample: http://msdn.microsoft.com/en-us/library/system.componentmodel.backgroundworker.cancellationpending.aspx
MY example . DoWork is below:
DoLengthyWork();
//this is never executed
if(bgWorker.CancellationPending)
{
MessageBox.Show("Up to here? ...");
e.Cancel = true;
}
inside DoLenghtyWork :
public void DoLenghtyWork()
{
OtherStuff();
for(int i=0 ; i<10000000; i++)
{ int j = i/3; }
}
inside OtherStuff() :
public void OtherStuff()
{
for(int i=0 ; i<10000000; i++)
{ int j = i/3; }
}
What you want to do is modify both DoLenghtyWork and OtherStuff() so that they become:
public void DoLenghtyWork()
{
if(!bgWorker.CancellationPending)
{
OtherStuff();
for(int i=0 ; i<10000000; i++)
{
int j = i/3;
}
}
}
public void OtherStuff()
{
if(!bgWorker.CancellationPending)
{
for(int i=0 ; i<10000000; i++)
{
int j = i/3;
}
}
}
The problem is caused by the fact that cmbDataSourceExtractor.CancelAsync() is an asynchronous method, the Cancel operation has not yet completed when cmdDataSourceExtractor.RunWorkerAsync(...) exitst. You should wait for cmdDataSourceExtractor to complete before calling RunWorkerAsync again. How to do this is explained in this SO question.
My answer is a bit different because I've tried these methods but they didn't work. My code uses an extra class that checks for a Boolean flag in a public static class as the database values are read or where I prefer it just before an object is added to a List object or something as such. See the change in the code below. I added the ThreadWatcher.StopThread property. for this explation I'm nog going to reinstate the current thread because it's not your issue but that's as easy as setting the property to false before accessing the next thread...
private void combobox2_TextChanged(object sender, EventArgs e)
{
//Stop the thread here with this
ThreadWatcher.StopThread = true;//the rest of this thread will run normally after the database function has stopped.
if (cmbDataSourceExtractor.IsBusy)
cmbDataSourceExtractor.CancelAsync();
while(cmbDataSourceExtractor.IsBusy)
Application.DoEvents();
var filledComboboxValues = new FilledComboboxValues{ V1 = combobox1.Text,
V2 = combobox2.Text};
cmbDataSourceExtractor.RunWorkerAsync(filledComboboxValues );
}
all fine
private void cmbDataSourceExtractor_DoWork(object sender, DoWorkEventArgs e)
{
if (this.cmbDataSourceExtractor.CancellationPending)
{
e.Cancel = true;
return;
}
// do stuff...
}
Now add the following class
public static class ThreadWatcher
{
public static bool StopThread { get; set; }
}
and in your class where you read the database
List<SomeObject>list = new List<SomeObject>();
...
if (!reader.IsDbNull(0))
something = reader.getString(0);
someobject = new someobject(something);
if (ThreadWatcher.StopThread == true)
break;
list.Add(something);
...
don't forget to use a finally block to properly close your database connection etc. Hope this helps! Please mark me up if you find it helpful.
In my case, I had to pool database for payment confirmation to come in and then update WPF UI.
Mechanism that spins up all the processes:
public void Execute(object parameter)
{
try
{
var url = string.Format("{0}New?transactionReference={1}", Settings.Default.PaymentUrlWebsite, "transactionRef");
Process.Start(new ProcessStartInfo(url));
ViewModel.UpdateUiWhenDoneWithPayment = new BackgroundWorker {WorkerSupportsCancellation = true};
ViewModel.UpdateUiWhenDoneWithPayment.DoWork += ViewModel.updateUiWhenDoneWithPayment_DoWork;
ViewModel.UpdateUiWhenDoneWithPayment.RunWorkerCompleted += ViewModel.updateUiWhenDoneWithPayment_RunWorkerCompleted;
ViewModel.UpdateUiWhenDoneWithPayment.RunWorkerAsync();
}
catch (Exception e)
{
ViewModel.Log.Error("Failed to navigate to payments", e);
MessageBox.Show("Failed to navigate to payments");
}
}
Mechanism that does checking for completion:
private void updateUiWhenDoneWithPayment_DoWork(object sender, DoWorkEventArgs e)
{
Thread.Sleep(30000);
while (string.IsNullOrEmpty(GetAuthToken()) && !((BackgroundWorker)sender).CancellationPending)
{
Thread.Sleep(5000);
}
//Plug in pooling mechanism
this.AuthCode = GetAuthToken();
}
Mechanism that cancels if window gets closed:
private void PaymentView_OnUnloaded(object sender, RoutedEventArgs e)
{
var context = DataContext as PaymentViewModel;
if (context.UpdateUiWhenDoneWithPayment != null && context.UpdateUiWhenDoneWithPayment.WorkerSupportsCancellation && context.UpdateUiWhenDoneWithPayment.IsBusy)
context.UpdateUiWhenDoneWithPayment.CancelAsync();
}
I agree with guys. But sometimes you have to add more things.
IE
1) Add this worker.WorkerSupportsCancellation = true;
2) Add to you class some method to do the following things
public void KillMe()
{
worker.CancelAsync();
worker.Dispose();
worker = null;
GC.Collect();
}
So before close your application your have to call this method.
3) Probably you can Dispose, null all variables and timers which are inside of the BackgroundWorker.