I have completed my program and would like to send that program in its compiled state to other pc's.
I understand that in the Debug folder there is the programName.exe file, which when I open it on the PC I created it with - it opens.
But if I send that .exe file to other pc's, it crashes or simply doesnt run!
Is there a way for others to see and use my program without installing visual studio?
I have asked this question before on another programming website with not much help, this is the link that they showed me, which i then followed:
http://www.dreamincode.net/forums/topic/58021-deploying-a-c%23-application-visual-studio-setup-project/#-application-visual-studio-setup-project/
The installer installs the program, but there is no files with it to open!
Other machines won't need to have Visual Studio installed - but they will need the appropriate version of .NET, depending on what you built against. If you target the "client" profile, the .NET distribution is fairly small.
You could build a setup project which kicks off the .NET framework installation if necessary, but it's likely to be quite a lot of work - in many cases it's probably simpler just to tell people what they need to install first, particularly if this is for personal use or friends/family.
There are most likely other DLLs that your project is dependent on that do not get copied over when only transporting that .exe file. You COULD just copy those over as well.
However, the best practice is to add a new Project under Setup for a Installer. It should detect those dependencies. Then the other users will just have to run the setup.exe that gets created (but you have to include the other folders and files that get generated). Open up the File System Editor tab of the Installer project. Then inside the Application Folder, I right click on "Primary output from [Main Project] (Active)", then select "Create Shortcut to ..." and drop the Shortcut into the Program Files and User Desktop folders on the left.
For something simple, the other DLLs should be fine.
Create the MSI Installer project for your application.
Copy your project output as input of MSI Installer.
.Exe is depends on .msi file, so when you click the .exe must verify the msi file existed in same directory.
Verify the .Net framework and Installation 3.0 before run the .exe or .Msi file.
The easiest approach would be:
1: Right click on your Solution Explorer and add a new project. The new project would be a Setup project, which would be under Other Projects -> Setup and Deployment -> Visual Studio installer and then choose Setup Project from the right side.
2: Add all your bin folder files to Application folder and then build your solution.
3: It will create a file with .msi extension. You can distribute that to anyone you want and they wouldn't need any VS.
Related
I did the following steps to create a Windows Setup project:
Create a Windows Forms Application using Visual Studio
Install "Microsoft Visual Studio Installer Projects plugin"
Add a "Setup Project" to the solution
In the "Application Folder", add project output
(Steps 5 and 6 are optional)
By right clicking the Setup project and opening "Properties", select "Prerequisites"
Select "Download prerequisites from the same location as my application"
Build the solution.
After all these steps, I see many files (Setup.exe, Setup.msi, NETFX472 folder) in the Release folder. But I only want one simple self-contained setup file. So, users can run the setup file and install the application easily.
How can I make a simple and self-contained Setup file for my project?
I know it's possible, but I am looking for an easier and more efficient way to do it.
I know I can create another Windows Forms app called Setup which copies the project outputs to user's Program Files directory and copy the output files one-by-one. But I don't think that solution is elegant.
EDIT:
After more tries, I learned that Setup.exe is for installing dependencies (only .NET Framework 4.7.2 for my case) and then running Setup.msi. So, without Setup.msi file, Setup.exe is nothing and vice-versa.
Also, I want my program should work 100% offline (including setup). So, installer should include offline .NET Framework 4.7.2 installer.
What I don't want here is Setup.exe to only install dependencies. It should also install my program. So, it should do also whatever Setup.msi file does. Second thing I don't want is dependency installer as separate file (offline .NET Framework 4.7.2 installer in this case). It should also be embedded into Setup.exe.
I have a solution in Visual Studio 2010, with seven projects. I have added a Installshield LE Setup project and when I add my main projects Primary-Output and then add a shortcut for the Primary-Output on the desktop, in the Installshield assistant.
Now when I install my application it creates a shortcut on the desktop, as expected. But when I run my application; it has a built-in logging class that generates a few log files. Now when I click the shortcut on the desktop to run the application, it creates my log files on the desktop, as well as where they are supposed to be created, which is the applications directory.
Why does installshield do this, because it's my understanding that it should only link to the .exe in the applications install folder, not think that it's launching the application from it's install folder.
I have gotten this to work by manually adding my output files to the setup project, but this is not ideal, as I would love to be able to configure this and then when I need to build a new installer, just build project and it's done.
If anybody can recommend a better installer that fits my needs, that would be great.
Installer Requirements
shortcut on desktop for application
shortcut on desktop for a url shortcut
shortcut in startup folder for application
eula
Something that is simple to get a setup project created, as I have a deadline and was only given 1 day to build and package a release build for a client.
Sounds like your app is creating log files wherever it's launched from, which isn't really Installshield's fault. You should really be writing to somewhere like the LocalApplicationData folder: http://msdn.microsoft.com/en-us/library/system.environment.specialfolder.aspx
I have a C# project that I have created in Visual Studio Express 2010. This program uses a 3rd party C# class that relies on/calls a C++ dll. I just copied the filename.dll into the bin/debug and bin/release folders of the project folder, and the application ran fine.
I am under the assumption that I can copy the release executable for the project to another computer and run it as long as the filename.dll is in the same directory as the executable. However, trying this on another computer with correct frameworks installed, etc. the program crashes with a system.dllnotfoundexception.
Strangely, my friend reports that the program runs on his computer with Visual Studio installed, but not the one without, though I have not actually seen this.
What could be causing this? And how can I get the release executable to run on another machine?
Thanks for any replies!
-Chase
Make sure you have the Visual C++ runtime installed (VS2005,VS2008,VS2010).
If your c++ dll is build by visual studio it may depends on the CRT, two things to check here :
If it depends on the release or debug CRT. Microsoft don't give you the right to distribute the debug version except for debugging purposes so it could be a problem.
Witch version it depends on
The last version from vs2010 could be copied in the same directory as the executable (msvcp100.dll for c++ msvcr100.dll for C)
Previous versions needed to be installed as side-by-side assemblies so running their setup was mandatory (Some versions like the VS2005 one are included in framework install but others like the VS2005 SP1 one need to be installed separately)
In any case the best way to debug such problems is to install Dependency Walker (free) on the computer having problems and let it tell you what dll is missing.
The easiest (albeit maybe not the "best") solution to this problem is adding a Setup project to your solution. A setup project will help you find any dependencies, and make them available during install.
The steps you need to take are the following:
Add a Setup project to your solution (found in Add project.../Setup templates)
Right-click the project, choose "Add/Project output..." and add the startup project of your program.
Right-click the project and choose "View/Custom actions".
Right-click the root node, select "Add Custom Action..." and from "Application Folder" add "Primary output from [your project name here]".
Now when you compile, an .msi installer is created. Run this installer on the other computer, and your program will be installed and runnable. To uninstall, run the installer again, or remove the program from "Add/Remove programs" under Control panel.
I programmed an hour-sheet application and now I would like to publish it so people can install and run it.
I've tried the publish function of visual studio 2008 but this gives me a clickOnce application/installer that's really confusing, but it works when I run it, but when I export the installer to another pc it installs it crashes at the end of the install.
so I tried just coping the installed files but then the program crashes at startup.
Is there a simple way to compile the application to a simple standalone executable or maybe containing a separate folder containing the resources (images/classes)?
You can copy the executable from bin\Release and it should work.
If it uses any DLLs that are not part of the .Net framework itself, you'll also need to copy those. (Set Copy Local to true in the properties for each reference)
If it uses any other files, you'll need to copy them to the right place or embed them in the EXE or a DLL.
I would add Setup Project to your solution which will create a setup.exe.
Here's some of the links:
http://www.dreamincode.net/forums/index.php?showtopic=58021
http://msdn.microsoft.com/en-us/library/ms235317.aspx
This will make sure that the dlls and assemblies are deployed to appropriate place when you install your software. It will also make sure that it gets rids of files when you uninstall it.
you can find your .exe here Projectpath\bin\Debug you have to give .config file too
I've seen popping up around the web recently .application files, for .NET installations. (Application manifests, per the extension details).
How exactly does one create these .application files in Visual Studio, and how do they differ from a standard windows setup? Please enlighten me.
I'm a C# developer, but never used a .application installer before.
How exactly does one create these .application files in Visual Studio?
.application file is automatically created when you do a click-once deployment.
For click-once deployment, you can
Right click on the project you want to release and choose publish menu item.
-- or --
Right click on the project, select properties, go to publish tab to publish.
how do they differ from a standard windows setup?
You would create a standard windows setup program by creating a setup project in your solution. And also they differ in a way that, for click-once, end-user does not have to install the program on their local machine.
You can learn more about differences between them from MSDN
Choosing Between ClickOnce and Windows Installer