Related
This seems to be a bit of an infamous error all over the web. So much so that I have been unable to find an answer to my problem as my scenario doesn't fit. An exception gets thrown when I save the image to the stream.
Weirdly this works perfectly with a png but gives the above error with jpg and gif which is rather confusing.
Most similar problem out there relate to saving images to files without permissions. Ironically the solution is to use a memory stream as I am doing....
public static byte[] ConvertImageToByteArray(Image imageToConvert)
{
using (var ms = new MemoryStream())
{
ImageFormat format;
switch (imageToConvert.MimeType())
{
case "image/png":
format = ImageFormat.Png;
break;
case "image/gif":
format = ImageFormat.Gif;
break;
default:
format = ImageFormat.Jpeg;
break;
}
imageToConvert.Save(ms, format);
return ms.ToArray();
}
}
More detail to the exception. The reason this causes so many issues is the lack of explanation :(
System.Runtime.InteropServices.ExternalException was unhandled by user code
Message="A generic error occurred in GDI+."
Source="System.Drawing"
ErrorCode=-2147467259
StackTrace:
at System.Drawing.Image.Save(Stream stream, ImageCodecInfo encoder, EncoderParameters encoderParams)
at System.Drawing.Image.Save(Stream stream, ImageFormat format)
at Caldoo.Infrastructure.PhotoEditor.ConvertImageToByteArray(Image imageToConvert) in C:\Users\Ian\SVN\Caldoo\Caldoo.Coordinator\PhotoEditor.cs:line 139
at Caldoo.Web.Controllers.PictureController.Croppable() in C:\Users\Ian\SVN\Caldoo\Caldoo.Web\Controllers\PictureController.cs:line 132
at lambda_method(ExecutionScope , ControllerBase , Object[] )
at System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters)
at System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters)
at System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters)
at System.Web.Mvc.ControllerActionInvoker.<>c__DisplayClassa.<InvokeActionMethodWithFilters>b__7()
at System.Web.Mvc.ControllerActionInvoker.InvokeActionMethodFilter(IActionFilter filter, ActionExecutingContext preContext, Func`1 continuation)
InnerException:
OK things I have tried so far.
Cloning the image and working on that.
Retrieving the encoder for that MIME passing that with jpeg quality setting.
OK I seem to have found the cause just by sheer luck and its nothing wrong with that particular method, it's further back up the call stack.
Earlier I resize the image and as part of that method I return the resized object as follows. I have inserted two calls to the above method and a direct save to a file.
// At this point the new bitmap has no MimeType
// Need to output to memory stream
using (var m = new MemoryStream())
{
dst.Save(m, format);
var img = Image.FromStream(m);
//TEST
img.Save("C:\\test.jpg");
var bytes = PhotoEditor.ConvertImageToByteArray(img);
return img;
}
It appears that the memory stream that the object was created on has to be open at the time the object is saved. I am not sure why this is. Is anyone able to enlighten me and how I can get around this.
I only return from a stream because after using the resize code similar to this the destination file has an unknown mime type (img.RawFormat.Guid) and Id like the Mime type to be correct on all image objects as it makes it hard write generic handling code otherwise.
EDIT
This didn't come up in my initial search but here's the answer from Jon Skeet
If you are getting that error , then I can say that your application doesn't have a write permission on some directory.
For example, if you are trying to save the Image from the memory stream to the file system , you may get that error.
Please if you are using XP, make sure to add write permission for the aspnet account on that folder.
If you are using windows server (2003,2008) or Vista, make sure that add write permission for the Network service account.
Hope it help some one.
I'll add this cause of the error as well in hopes it helps some future internet traveler. :)
GDI+ limits the maximum height of an image to 65500
We do some basic image resizing, but in resizing we try to maintain aspect ratio. We have a QA guy who's a little too good at this job; he decided to test this with a ONE pixel wide photo that was 480 pixels tall. When the image was scaled to meet our dimensions, the height was north of 68,000 pixels and our app exploded with A generic error occurred in GDI+.
You can verify this yourself with test:
int width = 480;
var height = UInt16.MaxValue - 36; //succeeds at 65499, 65500
try
{
while(true)
{
var image = new Bitmap(width, height);
using(MemoryStream ms = new MemoryStream())
{
//error will throw from here
image.Save(ms, ImageFormat.Jpeg);
}
height += 1;
}
}
catch(Exception ex)
{
//explodes at 65501 with "A generic error occurred in GDI+."
}
It's too bad there's not a friendly .net ArgumentException thrown in the constructor of Bitmap.
This article explains in detail what exactly happens: Bitmap and Image constructor dependencies
In short, for a lifetime of an Image constructed from a stream, the stream must not be destroyed.
So, instead of
using (var strm = new ... ) {
myImage = Image.FromStream(strm);
}
try this
Stream imageStream;
...
imageStream = new ...;
myImage = Image.FromStream(strm);
and close imageStream at the form close or web page close.
You'll also get this exception if you try to save to an invalid path or if there's a permissions issue.
If you're not 100% sure that the file path is available and permissions are correct then try writing a to a text file. This takes just a few seconds to rule out what would be a very simple fix.
var img = System.Drawing.Image.FromStream(incomingStream);
// img.Save(path);
System.IO.File.WriteAllText(path, "Testing valid path & permissions.");
And don't forget to clean up your file.
Save image to bitmap variable
using (var ms = new MemoryStream())
{
Bitmap bmp = new Bitmap(imageToConvert);
bmp.Save(ms, format);
return ms.ToArray();
}
Just in case if someone is doing as stupid stuff as I was.
1. make sure path does exist.
2. make sure you have permissions to write.
3. make sure your path is correct, in my case I was missing file name in the TargetPath :(
it should have said, your path sucks than "A generic error occurred in GDI+"
I also got this error when saving JPEGs, but only for certain images.
My final code:
try
{
img.SaveJpeg(tmpFile, quality); // This is always successful for say image1.jpg, but always throws the GDI+ exception for image2.jpg
}
catch (Exception ex)
{
// Try HU's method: Convert it to a Bitmap first
img = new Bitmap(img);
img.SaveJpeg(tmpFile, quality); // This is always successful
}
I didn't create the images so I can't tell what the difference is.
I'd appreciate if anyone could explain that.
This is my SaveJpeg function just FYI:
private static void SaveJpeg(this Image img, string filename, int quality)
{
EncoderParameter qualityParam = new EncoderParameter(Encoder.Quality, (long)quality);
ImageCodecInfo jpegCodec = GetEncoderInfo("image/jpeg");
EncoderParameters encoderParams = new EncoderParameters(1);
encoderParams.Param[0] = qualityParam;
img.Save(filename, jpegCodec, encoderParams);
}
private static ImageCodecInfo GetEncoderInfo(string mimeType)
{
var encoders = ImageCodecInfo.GetImageEncoders();
var encoder = encoders.SingleOrDefault(c => string.Equals(c.MimeType, mimeType, StringComparison.InvariantCultureIgnoreCase));
if (encoder == null) throw new Exception($"Encoder not found for mime type {mimeType}");
return encoder;
}
I found that if one of the parent folders where I was saving the file had a trailing space then GDI+ would throw the generic exception.
In other words, if I tried to save to "C:\Documents and Settings\myusername\Local Settings\Temp\ABC DEF M1 Trended Values \Images\picture.png" then it threw the generic exception.
My folder name was being generated from a file name that happened to have a trailing space so it was easy to .Trim() that and move on.
if your code is as follows then also this error occurs
private Image GetImage(byte[] byteArray)
{
using (var stream = new MemoryStream(byteArray))
{
return Image.FromStream(stream);
}
}
The correct one is
private Image GetImage(byte[] byteArray)
{
var stream = new MemoryStream(byteArray))
return Image.FromStream(stream);
}
This may be because we are returning from the using block
Had a very similar problem and also tried cloning the image which doesn't work. I found that the best solution was to create a new Bitmap object from the image that was loaded from the memory stream. That way the stream can be disposed of e.g.
using (var m = new MemoryStream())
{
var img = new Bitmap(Image.FromStream(m));
return img;
}
Hope this helps.
This is an expansion / qualification of Fred's response which stated: "GDI limits the height of an image to 65534". We ran into this issue with one of our .NET applications, and having seen the post, our outsourcing team raised their hands in the air and said they couldn't fix the problem without major changes.
Based on my testing, it's possible to create / manipulate images with a height larger than 65534, but the issue arises when saving to a stream or file IN CERTAIN FORMATS. In the following code, the t.Save() method call throws our friend the generic exception when the pixel height is 65501 for me. For reasons of curiosity, I repeated the test for width, and the same limit applied to saving.
for (int i = 65498; i <= 100000; i++)
{
using (Bitmap t = new Bitmap(800, i))
using (Graphics gBmp = Graphics.FromImage(t))
{
Color green = Color.FromArgb(0x40, 0, 0xff, 0);
using (Brush greenBrush = new SolidBrush(green))
{
// draw a green rectangle to the bitmap in memory
gBmp.FillRectangle(greenBrush, 0, 0, 799, i);
if (File.Exists("c:\\temp\\i.jpg"))
{
File.Delete("c:\\temp\\i.jpg");
}
t.Save("c:\\temp\\i.jpg", ImageFormat.Jpeg);
}
}
GC.Collect();
}
The same error also occurs if you write to a memory stream.
To get round it, you can repeat the above code and substitute ImageFormat.Tiff or ImageFormat.Bmp for ImageFormat.Jpeg.
This runs up to heights / widths of 100,000 for me - I didn't test the limits. As it happens .Tiff was a viable option for us.
BE WARNED
The in memory TIFF streams / files consume more memory than their JPG counterparts.
Error occurring because of Permission. make sure folder have ALL THE PERMISSION.
public Image Base64ToImage(string base64String)
{
// Convert Base64 String to byte[]
byte[] imageBytes = Convert.FromBase64String(base64String);
MemoryStream ms = new MemoryStream(imageBytes, 0,
imageBytes.Length);
// Convert byte[] to Image
ms.Write(imageBytes, 0, imageBytes.Length);
Image image = Image.FromStream(ms, true);
return image;
}
img.Save("YOUR PATH TO SAVE IMAGE")
SOLVED - I had this exact problem. The fix, for me, was to up the disk quota for IUSR on the IIS server. In this instance, we have a catalog app with images of items and such. The upload quota for the "Anonymous Web User" was set to 100MB, which is the default for this particular hosting company's IIS servers. I upped it to 400MB and was able to upload images without error.
This might not be your issue, but if it is, it's an easy fix.
In my case the problem was in the path I was saving (the root C:\). Changing it to D:\111\ made the exception go away.
Another cause for this error - the path you indicate in the Save method of the Bitmap instance doesn't exist or you haven't supplied a full / valid path.
Just had this error because I was passing in a filename and not a full path!
It happens!
My turn!
using (System.Drawing.Image img = Bitmap.FromFile(fileName))
{
... do some manipulation of img ...
img.Save(fileName, System.Drawing.Imaging.ImageFormat.Jpeg);
}
Got it on the .Save... because the using() is holding the file open, so I can't overwrite it. Maybe this will help someone in the future.
Same problem I was facing. But in my case, I was trying to save file in C drive and it was not accessible. So I tried it to save in D drive which was fully accessible and I succeeded.
So first check your folders in which you are trying to save. You must have all (read and write) rights for that particular folder.
Simple, create a new instance of Bitmap solves the problem.
string imagePath = Path.Combine(Environment.CurrentDirectory, $"Bhatti{i}.png");
Bitmap bitmap = new Bitmap(image);
bitmap.Save(imagePath);
I notice that your "jpeg" case is actually:
default:
format = ImageFormat.Jpeg;
break;
Are you sure that the format is jpeg and not something else?
I'd try:
case "image/jpg": // or "image/jpeg" !
format = ImageFormat.Jpeg;
break;
Or check what imageToConvert.MimeType() is actually returning.
UPDATE
Is there any other initialisation you need to do to the MemoryStream object?
I had this issue on a test server but not on the live server.
I was writing the image to a stream, so it wasn't a permission issue.
I'd been directly deploying some of the .dll's to the test server.
Deploying the entire solution fixed the issue, so it was probably a weird compilation mismatch
Just to throw another possible solution on the pile, I'll mention the case I ran into with this error message. The method Bitmap.Save would throw this exception when saving an bitmap I had transformed and was displaying. I discovered it would not throw the exception if the statement had a breakpoint on it, nor would it if the Bitmap.Save was preceeded by Thread.Sleep(500) so I suppose there is some sort of resource contention going on.
Simply copying the image to a new Bitmap object was enough to prevent this exception from appearing:
new Bitmap(oldbitmap).Save(filename);
One other cause of this error and that solve my problème is that your application doesn't have a write permission on some directory.
so to complete the answer of savindra : https://stackoverflow.com/a/7426516/6444829.
Here is how you Grant File Access to IIS_IUSERS
To provide access to an ASP.NET application, you must grant access to the IIs_IUSERS.
To grant read, write, and modify permissions to a specific File or Folder
In Windows Explorer, locate and select the required file.
Right click the file, and then click Properties.
In the Properties dialog box, click the Security tab.
On the Security tab, examine the list of users.
(If your application is running as a Network Service, add the network service account in the list and grant it the permission.
In the Properties dialog box, click IIs_IUSERS, and in the Permissions for NETWORK SERVICE section, select the Read, Write, and Modify permissions.
Click Apply, and then click OK.
this worked for me in my IIS of windows server 2016 and local IIS windows 10.
We had a similar problem on generating a PDF or resize image using ImageProcessor lib on production server.
Recycle the application pool fix the issue.
If you are trying to save an image to a remote location be sure to add the NETWORK_SERVICE user account into the security settings and give that user read and write permissions. Otherwise it is not going to work.
byte[] bts = (byte[])page1.EnhMetaFileBits;
using (var ms = new MemoryStream(bts))
{
var image = System.Drawing.Image.FromStream(ms);
System.Drawing.Image img = image.GetThumbnailImage(200, 260, null, IntPtr.Zero);
img.Save(NewPath, System.Drawing.Imaging.ImageFormat.Png);
}
I also get this error because i'm trying to save images with the same name of previous saved images.
Make sure that you don't save images with duplicate name.
Use for thar for example a 'Random' function (How does C#'s random number generator work?)
or for example generate a Guid (http://betterexplained.com/articles/the-quick-guide-to-guids/)
in my case, path was wrong
just use this
String path = Server.MapPath("~/last_img.png");//Path
For me I was using the Image.Save(Stream, ImageCodecInfo, EncoderParameters) and apparently this was causing the infamous A generic error occurred in GDI+ error.
I was trying to use EncoderParameter to save the jpegs in 100% quality. This was working perfectly on "my machine" (doh!) and not on production.
When I used the Image.Save(Stream, ImageFormat) instead, the error disappeared! So like an idiot I continued to use the latter although it saves them in default quality which I assume is just 50%.
Hope this info helps someone.
I encountered the problem too. The problem was due to the loading stream being disposed. But I did not dispose it, it was inside .Net framework. All I had to do was use:
image_instance = Image.FromFile(file_name);
instead of
image_instance.Load(file_name);
image_instance is of type System.Windows.Forms.PictureBox!
PictureBox's Load() disposes the stream which the image was loaded from, and I did not know that.
I'm trying to render a bitmap in Memory using mono. This image should be displayed on Adafruits 2.8" touch TFT (320*240). The Programm is developed with Visual Studio 2013 Community Edition. I want to host a ASP.NET Web Api and Show
some data on the Display. The ASP.NET part is working fine and the image is rendered. My idea was to write the Image to the framebuffer Input, but doing this I get an Exception saying that file is to large. I'm just writing raw data without BMP Header. Has someone managed doing this? Maybe creation of image is
wrong.
It seems as something is happening because the display changes and I can see white areas which might be from my image.
I don't want to use any extra libraries to keep it simple. So my idea is to use FBI directly. Does anyone know this problem and the solution?
Here is some of my code:
using (Bitmap bmp = new Bitmap(240, 320, PixelFormat.Format16bppRgb555))
{
[...]
Byte[] image = null;
using(MemoryStream memoryStream = new MemoryStream())
{
bitmap.Save(memoryStream, ImageFormat.Bmp);
Byte[] imageTemp = memoryStream.GetBuffer();
//Remove BMP header
image = new Byte[imageTemp.Length - 54];
Buffer.BlockCopy(imageTemp, 54, image, 0, image.Length);
//153600 byte
using (FileStream fb1 = new FileStream("/dev/fb1", FileMode.Open, FileAccess.ReadWrite, FileShare.ReadWrite))
{
fb1.Write(image, 0, image.Length);
fb1.Close();
}
}
}
Take a look at http://computerstruggles.blogspot.de/2013/02/how-to-program-directfb-in-c-on.html - the idea is to install the directfb library and use it from C# with PInvoke. The blog's author uses a mini wrapper in C to make using it even easier. BTW why don't you like to install additional libraries and to profit from the work others have done for you?
You may be running out of memory when the MemoryStream reallocates memory. When it needs to grow, it doubles in size. With this large of a write, the internal buffer is probably exceeding available memory. See Why does C# memory stream reserve so much memory? for more information.
I am trying to read an image file to a stream. But there is a difference in length for stream when I run the program on Windows XP and Windows 7 (same image file on both system). Here is my code:
private void ImageToStream(Stream stream, string imgPath)
{
System.Drawing.Image img = null;
img = System.Drawing.Image.FromFile(imgPath, true);
img.Save(stream, img.RawFormat);
}
Of course, I am using the same image for testing on both system.
The file system is NTFS. While I'm posting this photo to website, it's working fine for Windows 7 and wrong for Windows XP. I wonder there is a difference while reading an image from a stream in Windows 7 and Windows XP?
Thank in advance!
I have solved problem.
private void ImageToStream(Stream stream, string imgPath)
{
FileStream fileStream = new FileStream(imgPath,
FileMode.Open, FileAccess.Read);
byte[] buffer = new Byte[checked((uint)Math.Min(4096,
(int)fileStream.Length))];
int bytesRead = 0;
while ((bytesRead = fileStream.Read(buffer, 0, buffer.Length)) != 0)
stream.Write(buffer, 0, bytesRead);
}
Its working fine for both system now. I think because Image.FromFile uses the native GDI calls to load the image. I have used new code and its working fine now.
What you seem to be attempting to do is to copy from one stream to another. That is a very simple operation, one that certainly does not require knowledge of the content of the source stream. Instead your code will decode the image, and then recode it. There is no reason why that should result in an identical file. Indeed for lossy compression algorithms that would result in a loss of quality.
What you need to do instead is simply copy the content of the source stream directly to the output stream. This question covers that topic in some detail: How do I copy the contents of one stream to another?
This seems to be a bit of an infamous error all over the web. So much so that I have been unable to find an answer to my problem as my scenario doesn't fit. An exception gets thrown when I save the image to the stream.
Weirdly this works perfectly with a png but gives the above error with jpg and gif which is rather confusing.
Most similar problem out there relate to saving images to files without permissions. Ironically the solution is to use a memory stream as I am doing....
public static byte[] ConvertImageToByteArray(Image imageToConvert)
{
using (var ms = new MemoryStream())
{
ImageFormat format;
switch (imageToConvert.MimeType())
{
case "image/png":
format = ImageFormat.Png;
break;
case "image/gif":
format = ImageFormat.Gif;
break;
default:
format = ImageFormat.Jpeg;
break;
}
imageToConvert.Save(ms, format);
return ms.ToArray();
}
}
More detail to the exception. The reason this causes so many issues is the lack of explanation :(
System.Runtime.InteropServices.ExternalException was unhandled by user code
Message="A generic error occurred in GDI+."
Source="System.Drawing"
ErrorCode=-2147467259
StackTrace:
at System.Drawing.Image.Save(Stream stream, ImageCodecInfo encoder, EncoderParameters encoderParams)
at System.Drawing.Image.Save(Stream stream, ImageFormat format)
at Caldoo.Infrastructure.PhotoEditor.ConvertImageToByteArray(Image imageToConvert) in C:\Users\Ian\SVN\Caldoo\Caldoo.Coordinator\PhotoEditor.cs:line 139
at Caldoo.Web.Controllers.PictureController.Croppable() in C:\Users\Ian\SVN\Caldoo\Caldoo.Web\Controllers\PictureController.cs:line 132
at lambda_method(ExecutionScope , ControllerBase , Object[] )
at System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters)
at System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters)
at System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters)
at System.Web.Mvc.ControllerActionInvoker.<>c__DisplayClassa.<InvokeActionMethodWithFilters>b__7()
at System.Web.Mvc.ControllerActionInvoker.InvokeActionMethodFilter(IActionFilter filter, ActionExecutingContext preContext, Func`1 continuation)
InnerException:
OK things I have tried so far.
Cloning the image and working on that.
Retrieving the encoder for that MIME passing that with jpeg quality setting.
OK I seem to have found the cause just by sheer luck and its nothing wrong with that particular method, it's further back up the call stack.
Earlier I resize the image and as part of that method I return the resized object as follows. I have inserted two calls to the above method and a direct save to a file.
// At this point the new bitmap has no MimeType
// Need to output to memory stream
using (var m = new MemoryStream())
{
dst.Save(m, format);
var img = Image.FromStream(m);
//TEST
img.Save("C:\\test.jpg");
var bytes = PhotoEditor.ConvertImageToByteArray(img);
return img;
}
It appears that the memory stream that the object was created on has to be open at the time the object is saved. I am not sure why this is. Is anyone able to enlighten me and how I can get around this.
I only return from a stream because after using the resize code similar to this the destination file has an unknown mime type (img.RawFormat.Guid) and Id like the Mime type to be correct on all image objects as it makes it hard write generic handling code otherwise.
EDIT
This didn't come up in my initial search but here's the answer from Jon Skeet
If you are getting that error , then I can say that your application doesn't have a write permission on some directory.
For example, if you are trying to save the Image from the memory stream to the file system , you may get that error.
Please if you are using XP, make sure to add write permission for the aspnet account on that folder.
If you are using windows server (2003,2008) or Vista, make sure that add write permission for the Network service account.
Hope it help some one.
I'll add this cause of the error as well in hopes it helps some future internet traveler. :)
GDI+ limits the maximum height of an image to 65500
We do some basic image resizing, but in resizing we try to maintain aspect ratio. We have a QA guy who's a little too good at this job; he decided to test this with a ONE pixel wide photo that was 480 pixels tall. When the image was scaled to meet our dimensions, the height was north of 68,000 pixels and our app exploded with A generic error occurred in GDI+.
You can verify this yourself with test:
int width = 480;
var height = UInt16.MaxValue - 36; //succeeds at 65499, 65500
try
{
while(true)
{
var image = new Bitmap(width, height);
using(MemoryStream ms = new MemoryStream())
{
//error will throw from here
image.Save(ms, ImageFormat.Jpeg);
}
height += 1;
}
}
catch(Exception ex)
{
//explodes at 65501 with "A generic error occurred in GDI+."
}
It's too bad there's not a friendly .net ArgumentException thrown in the constructor of Bitmap.
This article explains in detail what exactly happens: Bitmap and Image constructor dependencies
In short, for a lifetime of an Image constructed from a stream, the stream must not be destroyed.
So, instead of
using (var strm = new ... ) {
myImage = Image.FromStream(strm);
}
try this
Stream imageStream;
...
imageStream = new ...;
myImage = Image.FromStream(strm);
and close imageStream at the form close or web page close.
You'll also get this exception if you try to save to an invalid path or if there's a permissions issue.
If you're not 100% sure that the file path is available and permissions are correct then try writing a to a text file. This takes just a few seconds to rule out what would be a very simple fix.
var img = System.Drawing.Image.FromStream(incomingStream);
// img.Save(path);
System.IO.File.WriteAllText(path, "Testing valid path & permissions.");
And don't forget to clean up your file.
Save image to bitmap variable
using (var ms = new MemoryStream())
{
Bitmap bmp = new Bitmap(imageToConvert);
bmp.Save(ms, format);
return ms.ToArray();
}
Just in case if someone is doing as stupid stuff as I was.
1. make sure path does exist.
2. make sure you have permissions to write.
3. make sure your path is correct, in my case I was missing file name in the TargetPath :(
it should have said, your path sucks than "A generic error occurred in GDI+"
I also got this error when saving JPEGs, but only for certain images.
My final code:
try
{
img.SaveJpeg(tmpFile, quality); // This is always successful for say image1.jpg, but always throws the GDI+ exception for image2.jpg
}
catch (Exception ex)
{
// Try HU's method: Convert it to a Bitmap first
img = new Bitmap(img);
img.SaveJpeg(tmpFile, quality); // This is always successful
}
I didn't create the images so I can't tell what the difference is.
I'd appreciate if anyone could explain that.
This is my SaveJpeg function just FYI:
private static void SaveJpeg(this Image img, string filename, int quality)
{
EncoderParameter qualityParam = new EncoderParameter(Encoder.Quality, (long)quality);
ImageCodecInfo jpegCodec = GetEncoderInfo("image/jpeg");
EncoderParameters encoderParams = new EncoderParameters(1);
encoderParams.Param[0] = qualityParam;
img.Save(filename, jpegCodec, encoderParams);
}
private static ImageCodecInfo GetEncoderInfo(string mimeType)
{
var encoders = ImageCodecInfo.GetImageEncoders();
var encoder = encoders.SingleOrDefault(c => string.Equals(c.MimeType, mimeType, StringComparison.InvariantCultureIgnoreCase));
if (encoder == null) throw new Exception($"Encoder not found for mime type {mimeType}");
return encoder;
}
I found that if one of the parent folders where I was saving the file had a trailing space then GDI+ would throw the generic exception.
In other words, if I tried to save to "C:\Documents and Settings\myusername\Local Settings\Temp\ABC DEF M1 Trended Values \Images\picture.png" then it threw the generic exception.
My folder name was being generated from a file name that happened to have a trailing space so it was easy to .Trim() that and move on.
if your code is as follows then also this error occurs
private Image GetImage(byte[] byteArray)
{
using (var stream = new MemoryStream(byteArray))
{
return Image.FromStream(stream);
}
}
The correct one is
private Image GetImage(byte[] byteArray)
{
var stream = new MemoryStream(byteArray))
return Image.FromStream(stream);
}
This may be because we are returning from the using block
Had a very similar problem and also tried cloning the image which doesn't work. I found that the best solution was to create a new Bitmap object from the image that was loaded from the memory stream. That way the stream can be disposed of e.g.
using (var m = new MemoryStream())
{
var img = new Bitmap(Image.FromStream(m));
return img;
}
Hope this helps.
This is an expansion / qualification of Fred's response which stated: "GDI limits the height of an image to 65534". We ran into this issue with one of our .NET applications, and having seen the post, our outsourcing team raised their hands in the air and said they couldn't fix the problem without major changes.
Based on my testing, it's possible to create / manipulate images with a height larger than 65534, but the issue arises when saving to a stream or file IN CERTAIN FORMATS. In the following code, the t.Save() method call throws our friend the generic exception when the pixel height is 65501 for me. For reasons of curiosity, I repeated the test for width, and the same limit applied to saving.
for (int i = 65498; i <= 100000; i++)
{
using (Bitmap t = new Bitmap(800, i))
using (Graphics gBmp = Graphics.FromImage(t))
{
Color green = Color.FromArgb(0x40, 0, 0xff, 0);
using (Brush greenBrush = new SolidBrush(green))
{
// draw a green rectangle to the bitmap in memory
gBmp.FillRectangle(greenBrush, 0, 0, 799, i);
if (File.Exists("c:\\temp\\i.jpg"))
{
File.Delete("c:\\temp\\i.jpg");
}
t.Save("c:\\temp\\i.jpg", ImageFormat.Jpeg);
}
}
GC.Collect();
}
The same error also occurs if you write to a memory stream.
To get round it, you can repeat the above code and substitute ImageFormat.Tiff or ImageFormat.Bmp for ImageFormat.Jpeg.
This runs up to heights / widths of 100,000 for me - I didn't test the limits. As it happens .Tiff was a viable option for us.
BE WARNED
The in memory TIFF streams / files consume more memory than their JPG counterparts.
Error occurring because of Permission. make sure folder have ALL THE PERMISSION.
public Image Base64ToImage(string base64String)
{
// Convert Base64 String to byte[]
byte[] imageBytes = Convert.FromBase64String(base64String);
MemoryStream ms = new MemoryStream(imageBytes, 0,
imageBytes.Length);
// Convert byte[] to Image
ms.Write(imageBytes, 0, imageBytes.Length);
Image image = Image.FromStream(ms, true);
return image;
}
img.Save("YOUR PATH TO SAVE IMAGE")
SOLVED - I had this exact problem. The fix, for me, was to up the disk quota for IUSR on the IIS server. In this instance, we have a catalog app with images of items and such. The upload quota for the "Anonymous Web User" was set to 100MB, which is the default for this particular hosting company's IIS servers. I upped it to 400MB and was able to upload images without error.
This might not be your issue, but if it is, it's an easy fix.
In my case the problem was in the path I was saving (the root C:\). Changing it to D:\111\ made the exception go away.
Another cause for this error - the path you indicate in the Save method of the Bitmap instance doesn't exist or you haven't supplied a full / valid path.
Just had this error because I was passing in a filename and not a full path!
It happens!
My turn!
using (System.Drawing.Image img = Bitmap.FromFile(fileName))
{
... do some manipulation of img ...
img.Save(fileName, System.Drawing.Imaging.ImageFormat.Jpeg);
}
Got it on the .Save... because the using() is holding the file open, so I can't overwrite it. Maybe this will help someone in the future.
Same problem I was facing. But in my case, I was trying to save file in C drive and it was not accessible. So I tried it to save in D drive which was fully accessible and I succeeded.
So first check your folders in which you are trying to save. You must have all (read and write) rights for that particular folder.
Simple, create a new instance of Bitmap solves the problem.
string imagePath = Path.Combine(Environment.CurrentDirectory, $"Bhatti{i}.png");
Bitmap bitmap = new Bitmap(image);
bitmap.Save(imagePath);
I notice that your "jpeg" case is actually:
default:
format = ImageFormat.Jpeg;
break;
Are you sure that the format is jpeg and not something else?
I'd try:
case "image/jpg": // or "image/jpeg" !
format = ImageFormat.Jpeg;
break;
Or check what imageToConvert.MimeType() is actually returning.
UPDATE
Is there any other initialisation you need to do to the MemoryStream object?
I had this issue on a test server but not on the live server.
I was writing the image to a stream, so it wasn't a permission issue.
I'd been directly deploying some of the .dll's to the test server.
Deploying the entire solution fixed the issue, so it was probably a weird compilation mismatch
Just to throw another possible solution on the pile, I'll mention the case I ran into with this error message. The method Bitmap.Save would throw this exception when saving an bitmap I had transformed and was displaying. I discovered it would not throw the exception if the statement had a breakpoint on it, nor would it if the Bitmap.Save was preceeded by Thread.Sleep(500) so I suppose there is some sort of resource contention going on.
Simply copying the image to a new Bitmap object was enough to prevent this exception from appearing:
new Bitmap(oldbitmap).Save(filename);
One other cause of this error and that solve my problème is that your application doesn't have a write permission on some directory.
so to complete the answer of savindra : https://stackoverflow.com/a/7426516/6444829.
Here is how you Grant File Access to IIS_IUSERS
To provide access to an ASP.NET application, you must grant access to the IIs_IUSERS.
To grant read, write, and modify permissions to a specific File or Folder
In Windows Explorer, locate and select the required file.
Right click the file, and then click Properties.
In the Properties dialog box, click the Security tab.
On the Security tab, examine the list of users.
(If your application is running as a Network Service, add the network service account in the list and grant it the permission.
In the Properties dialog box, click IIs_IUSERS, and in the Permissions for NETWORK SERVICE section, select the Read, Write, and Modify permissions.
Click Apply, and then click OK.
this worked for me in my IIS of windows server 2016 and local IIS windows 10.
We had a similar problem on generating a PDF or resize image using ImageProcessor lib on production server.
Recycle the application pool fix the issue.
If you are trying to save an image to a remote location be sure to add the NETWORK_SERVICE user account into the security settings and give that user read and write permissions. Otherwise it is not going to work.
byte[] bts = (byte[])page1.EnhMetaFileBits;
using (var ms = new MemoryStream(bts))
{
var image = System.Drawing.Image.FromStream(ms);
System.Drawing.Image img = image.GetThumbnailImage(200, 260, null, IntPtr.Zero);
img.Save(NewPath, System.Drawing.Imaging.ImageFormat.Png);
}
I also get this error because i'm trying to save images with the same name of previous saved images.
Make sure that you don't save images with duplicate name.
Use for thar for example a 'Random' function (How does C#'s random number generator work?)
or for example generate a Guid (http://betterexplained.com/articles/the-quick-guide-to-guids/)
in my case, path was wrong
just use this
String path = Server.MapPath("~/last_img.png");//Path
For me I was using the Image.Save(Stream, ImageCodecInfo, EncoderParameters) and apparently this was causing the infamous A generic error occurred in GDI+ error.
I was trying to use EncoderParameter to save the jpegs in 100% quality. This was working perfectly on "my machine" (doh!) and not on production.
When I used the Image.Save(Stream, ImageFormat) instead, the error disappeared! So like an idiot I continued to use the latter although it saves them in default quality which I assume is just 50%.
Hope this info helps someone.
I encountered the problem too. The problem was due to the loading stream being disposed. But I did not dispose it, it was inside .Net framework. All I had to do was use:
image_instance = Image.FromFile(file_name);
instead of
image_instance.Load(file_name);
image_instance is of type System.Windows.Forms.PictureBox!
PictureBox's Load() disposes the stream which the image was loaded from, and I did not know that.
I'm using an AsyncFileUpload (AJAX Toolkit) to upload images.
I have a Button which handle the image resizing.
This have worked fine for some time, but not anymore...
protected void BtnUploadImage_Click(object sender, EventArgs e)
{
var imageFileNameRegEx = new Regex(#"(.*?)\.(jpg|jpeg|png|gif)$",
RegexOptions.IgnoreCase);
if (!AsyncFileUpload1.HasFile ||
!imageFileNameRegEx.IsMatch(AsyncFileUpload1.FileName))
{
AsyncFileUpload1.FailedValidation = true;
ErrorLabel.Visible = true;
return;
}
ErrorLabel.Visible = false;
var file = AsyncFileUpload1.PostedFile.InputStream;
var img = Image.FromStream(file, false, false);
...
}
Another thing which I find weird: If I try a image which is smaller than 80kb it works..!
We have tried to restart the server, but no change.
Same code runs fine on my machine. (heard that before ?? :) )
I also tried to save the file on the server, then to get the file trough Image.FromFile(), but then I get "Cannot access a closed file."
How to resolve this ?
I would make sure the stream is positioned at the start:
var file = AsyncFileUpload1.FileContent;
file.Seek(0, SeekOrigin.Begin);
var img = Image.FromFile(file);
Second thing to check: the requestLengthDiskThreshold setting. Unless specified this setting has a default of ... yes, 80 KB.
Note: imo there should be no overall difference whether you use Image to read the file stream directly or if you use an intermediate MemoryStream (other than the fact that in the latter case you actually loads the entire file into memory twice). Either way the original file stream will be read from, thus stream position, CAS rights, file permissions, etc still applies.
Note2: and yes, by all means make sure those resources are disposed properly :)
This is correct, it will not work. The problem is that you are crossing a managed/unmanaged boundary, I recently encountered the same. Other problems are that the stream is not directly there and the Image.FromStream has no idea how to deal with it.
The solution is quite straightforward: read everything from PostedFile into a MemoryStream (just use new MemoryStream()) and use the MemoryStream with the Image.FromStream. This will solve your problem.
Make sure to make proper use of using when you work with Image, Graphics and Streams. All of them implement the IDisposable and in an ASP.NET environment, not using using blocks properly, can and will lead to increased memory usage and other nasty side effect on the long run (and ASP.NET apps do run very long!).
The solution should look something like this:
using(Stream memstr = new MemoryStream())
{
// copy to a memory stream
Stream uploadStream = AsyncFileUpload1.PostedFile.InputStream;
byte[] all = new byte[uploadStream.Length];
uploadStream.Read(all, 0, uploadStream.Length);
memstr.Write(all, 0, uploadStream.Length);
memstr.Seek(0, SeekOrigin.Begin);
using(Graphics g = Graphics.FromStream(memstr))
{
// do your img manipulation, or Save it.
}
}
Update: the crossing managed boundary issue only occurs in the reverse (using Response stream), it seems, not with Upload streams, but I'm not entirely sure.