I have stringBuilder & string class, storing a path:
StringBuilder name = new StringBuilder();
name.Append(#"NETWORK\MyComputer");
String serverName = name.ToString(); //this converts the \ to a \\
I have tried a number of things, but it always results in the string having \
Using serverName.Replace("\\", #"\"); doesn't work, it leaves it as a \
servername.Replace("\\", "\""); adds a " to the string, which is still not correct.
Please assist.
If you are concerned at a single back slash being shown as a double back slash then don't be - that is simply the way it is shown to you in the debugger.
The back slash is a special character, that 'specialness' is turned off by doubling it up. Alternatively the # symbol can be prefixed to the string in source code which avoids having to use it.
Use
name.Append(Path.Combine("NETWORK", "MyComputer");
In strings \ is an escape sequence. So \ in debugger will be \\
Acc.to MSDN
Character combinations consisting of a backslash (\) followed by a letter or by a combination of digits are called "escape sequences." To represent a newline character, single quotation mark, or certain other characters in a character constant, you must use escape sequences. An escape sequence is regarded as a single character and is therefore valid as a character constant.
Escape sequences are typically used to specify actions such as carriage returns and tab movements on terminals and printers. They are also used to provide literal representations of nonprinting characters and characters that usually have special meanings, such as the double quotation mark ("). The following table lists the ANSI escape sequences and what they represent.
Read Escape Sequences
I don't think your code can be compiled. Because \ is an escape character, thus the string "\" will be wrong. The #"\" is right because the # (literal) has ignored that escape and tread it as a normal character.
See more here
Related
I'm doing a match comparison on some escaped strings:
Regex.IsMatch("\\Application.evtx", "DebugLogs\\ConfigurationServices.log");
I don't see why I'm getting:
"parsing "DebugLogs\ConfigurationServices.log" - Unrecognized escape sequence \C."
The \C is escaped?
The edit really fooled a lot of people, including me!
'\' is a special character in regular expressions - it effectively is an escape character or denotes an escape sequence.
So the RegEx engine sees DebugLogs*\C*onfigurationServices.log which is, indeed, an unrecognized escape sequence. \A actually is an existing escape sequence.
So you need to escape the escape character. The simplest way to do this is to double the number of slashes used:
Regex.IsMatch("\\\\Application.evtx", "DebugLogs\\\\ConfigurationServices.log");
Which the RegEx engine will see as comparisons betweeen "\\Appplication.evtx" and "DebugLogs\\ConfigurationServices.log" - now the backslash has been escaped and has no special meaning.
Regex.IsMatch(#"\\Application.evtx", #"DebugLogs\\ConfigurationServices.log");
works fine too and is more readable.
The \ character is the escape character in strings. For example if you'd like to do a carriage return, you'd use \r. To get around this either use literal strings
#"\Application.evtx"
Or escape the escape character
"\\Application.evtx"
You probably want
Regex.IsMatch(#"\Application.evtx", #"DebugLogs\ConfigurationServices.log");
without the "#" C# will treat \C as an escape sequence similar to the way it would convert \n in to a newline character however \C is not a recognised/valid escape sequence.
string value1 = File.ReadAllText("C:\\file.txt");
string value2 = File.ReadAllText(#"C:\file.txt");
In the above statements when is the difference of using #"C:\file.txt" and C:\file.txt
Compiler would read #"C:\file.txt" as is. Removing verbatim (#) will make it treat '\f' as a single escape character (Form feed). In other words:
#"C:\file.txt" == "C:\\file.txt"
#"C:\file.txt" != "C:\file.txt" // treated as C: + FormFeed + ile.txt
Verbatim string literals start with # and are also enclosed in double
quotation marks. For example:
#"good morning" // a string literal
The advantage of verbatim strings is that escape sequences are not
processed, which makes it easy to write, for example, a fully
qualified file name:
#"c:\Docs\Source\a.txt" // rather than "c:\\Docs\\Source\\a.txt"
String literals:
A regular string literal consists of zero or more characters enclosed
in double quotes, as in "hello", and may include both simple escape
sequences (such as \t for the tab character) and hexadecimal and
Unicode escape sequences.
A verbatim string literal consists of an # character followed by a
double-quote character, zero or more characters, and a closing
double-quote character. A simple example is #"hello". In a verbatim
string literal, the characters between the delimiters are interpreted
verbatim, the only exception being a quote-escape-sequence. In
particular, simple escape sequences and hexadecimal and Unicode escape
sequences are not processed in verbatim string literals. A verbatim
string literal may span multiple lines.
When using a \ in a string, you normally have to use \\ because the \ is an escape character. In reality, the first string you show (File.ReadAllText("C:\file.txt");) should throw a compile error.
The # will allow you to build your string without using \\ every time you need a \.
string value1 = "C:\file.txt";
string value2 = #"C:\file.txt";
the string for value1 will contain a formfeed character where the \f is, while the second one will keep the backslash and the f. (This becomes very clear if you try to output them in a console application with Console.Write...)
The correct way for the value1 version would be "C:\\file.txt"
(The value2 version uses whats called, as Dmitry said, a verbatim string)
I read some C# article to combine a path using Path.Combine(part1,part2).
It uses the following:
string part1 = #"c:\temp";
string part2 = #"assembly.txt";
May I know what is the use of # in part1 and part2?
# is not related to any method.
It means that you don't need to escape special characters in the string following to the symbol:
#"c:\temp"
is equal to
"c:\\temp"
Such string is called 'verbatim' or #-quoted. See MSDN.
As other have said its one way so that you don't need to escape special characters and very useful in specifying file paths.
string s1 =#"C:\MyFolder\Blue.jpg";
One more usage is when you have large strings and want it to be displayed across multiple lines rather than a long one.
string s2 =#"This could be very large string something like a Select query
which you would want to be shown spanning across multiple lines
rather than scrolling to the right and see what it all reads up";
As stated in C# Language Specification 4.0:
2.4.4.5 String literals
C# supports two forms of string
literals: regular string literals and
verbatim string literals. A regular
string literal consists of zero or
more characters enclosed in double
quotes, as in "hello", and may include
both simple escape sequences (such as
\t for the tab character), and
hexadecimal and Unicode escape
sequences. A verbatim string literal
consists of an # character followed by
a double-quote character, zero or more
characters, and a closing double-quote
character. A simple example is
#"hello". In a verbatim string
literal, the characters between the
delimiters are interpreted verbatim,
the only exception being a
quote-escape-sequence. In particular,
simple escape sequences, and
hexadecimal and Unicode escape
sequences are not processed in
verbatim string literals.
It denotes a verbatim string literal, and allows you to use certain characters that normally have special meaning, for example \, which is normally an escape character, and new lines. For this reason it's very useful when dealing with Windows paths.
Without using #, the first line of your example would have to be:
string part1 = "c:\\temp";
More information here.
With # you dont have to escape special characters.
So you would have to write "c:\\temp" without #
If more presise it is called 'verbatim' strings. You could read here about it:
http://msdn.microsoft.com/en-us/library/aa691090(v=vs.71).aspx
The # just indicates a different way of specifying a string such that you do not have to escape characters with . the only caveat is that double quotes need to be "" to represent a single ".
This question already has answers here:
Closed 11 years ago.
Possible Duplicate:
How to use “\” in a string without making it an escape sequence - C#?
Why is it giving me an error in C# when I use a string like: "\themes\default\layout.png"? At the "d" and "l" location? It says unrecognized escape sequence. And how do I stop it from giving me an error when I use: "\"?
Thans
You need to escape it with an additional \:
string value = "\\themes\\default\\layout.png";
or use the # symbol:
string value = #"\themes\default\layout.png";
which will avoid you from doubling all \.
Or if you are dealing with paths (which is what it seems you are) you could use the Path.Combine method:
string value = Path.Combine(#"\", "themes", "default", "layout.jpg");
You're using a backslash to escape 't' and 'd'. If you want to escape the actual backslash you need to do so:
"\\themes\\default\\layout.png"
"Regular" string literals treat the \ character as a special character, used for escape sequences to insert quickly special characters in strings - \n, for example, is used to insert the newline character, \" is used to insert the " character without terminating the string, and so on.
Because of this, to insert a backslash into a "normal" string you have to insert the corresponding escape sequence, which, unsurprisingly, is \\; you would then write in your case:
"\\themes\\default\\layout.png"
Failing to escape the backslashes will result in weird results or errors like the ones you got, since the compiler will try to interpret the couple backslash-letter that follows it as an escape sequence; if such sequence is defined you'll get unwanted characters (e.g. the first \t is escaped to a tab character), if it's not (like \l) you'll get an error about an undefined escape sequence.
Another option, if you don't need to escape any character, is to use the so-called "verbatim" strings literals: if you prefix the string with an # character the escape sequences will be disabled, and the string you write will be taken verbatim by the compiler. The only exception to this rule is for quotes, that can be inserted inside the verbatim string via the "quote escape sequence", i.e. "". In your case you would write:
#"\themes\default\layout.png"
For more info about regular vs verbatim string literals have a look at their documentation.
The backslash is treated as an escape character. Either escape the backslash itslef in the string like so:
"\\themes\\default\\layout.png"
or disable escaping altogether using a verbatim string literal:
#"\themes\default\layout.png"
I've noticed that C# adds additional slashes (\) to paths. Consider the path C:\Test. When I inspect the string with this path in the text visualiser, the actual string is C:\\Test.
Why is this? It confuses me, as sometimes I may want to split the path up (using string.Split()), but have to wonder which string to use (one or two slashes).
The \\ is used because the \ is an escape character and is need to represent the a single \.
So it is saying treat the first \ as an escape character and then the second \ is taken as the actual value. If not the next character after the first \ would be parsed as an escaped character.
Here is a list of available escape characters:
\' - single quote, needed for character literals
\" - double quote, needed for string literals
\\ - backslash
\0 – Null
\a - Alert
\b - Backspace
\f - Form feed
\n - New line
\r - Carriage return
\t - Horizontal tab
\v - Vertical quote
\u - Unicode escape sequence for character
\U - Unicode escape sequence for surrogate pairs.
\x - Unicode escape sequence similar to "\u" except with variable length.
EDIT: To answer your question regarding Split, it should be no issue. Use Split as you would normally. The \\ will be treated as only the one character of \.
.Net is not adding anything to your string here. What your seeing is an effect of how the debugger chooses to display strings. C# strings can be represented in 2 forms
Verbatim Strings: Prefixed with an # sign and removes the need o escape \\ characters
Normal Strings: Standard C style strings where \\ characters need to escape themselves
The debugger will display a string literal as a normal string vs. a verbatim string. It's just an issue of display though, it doesn't affect it's underlying value.
Debugger visualizers display strings in the form in which they would appear in C# code. Since \ is used to escape characters in non-verbatum C# strings, \\ is the correct escaped form.
Okay, so the answers above are not wholly correct. As such I am adding my findings for the next person who reads this post.
You cannot split a string using any of the chars in the table above if you are reading said string(s) from an external source.
i.e,
string[] splitStrings = File.ReadAllText([path]).Split((char)7);
will not split by those chars. However internally created strings work fine.
i.e.,
string[] splitStrings = "hello\agoodbye".Split((char)7);
This may not hold true for other methods of reading text from a file. I am unsure as I have not tested with other methods. With that in mind, it is probably best not to use those chars for delimiting strings!