I am trying to detect the Idle time in a Windows Mobile application and show a Screen lock after this inactive period. This link http://blog.opennetcf.com/ctacke/2009/05/19/DetectingApplicationIdle.aspx gives a hint but I found that this works only for a single form.
How can this same code be used across an application with multiple forms. I tried implementing this code after the InitializeComponent() for each form and used the Reset() function in the form Activate and GotFocus event so that the timer is reset after the user closes the screen lock by entering a PIN number. But this does not seem to work for multiple forms and the timer is not reset but it keeps firing every minute. Even if I am working on the application the event fires up every 1 minute (as per the sample code) and this is not correct.
Can anyone suggest how to use this functionality across the entire application.
Thanks in advance for any solution.
We need to see your code to know what's wrong, but the method proposed in that blog entry uses an IMessageFilter implementation. That hooks into the Windows message pump, which is application-wide not a single-Form system. I use the exact same technique for application-wide idle detection in a couple of solutions and it works well.
My guess is that you have a scope issue with the IMessageFilter instance you're using. If you create it as a Form-level variable (like the sample in that blog does), when close the Form that the filter is disposed of and will no longer work. If you have multiple Forms, you need to put it somewhere else in the Model so it survives as long as the app is up.
What about utilizing GetIdleTime ? Seems like this, paired with a timer that wakes peroidically to check it, could detect system idle and allow you to show the screen lock.
Related
I am a fairly experienced WinForms developer. I have an MdiApplication that used to work well. However, recently the main shell of the application, for which we use ComponentOne RibbonForm, has been updated in a big way. This update did affect some of our other 3rd party components, which we established was due to ComponentOne's use of DoEvents() in their event code. I thought I had cleaned up all of the code causing problems but I now have found another...
When I have multiple MdiChildren open and select one of these in code from an button click event on the ribbon form via
document.Activate();
document.EditorControl.Select();
document.EditorControl.Focus();
the other open MdiChildren documents still have focus, that it the forms are highlighted and input is not set on the document I set in code. Two questions:
How can I ensure that the Form I want to make active is the only one that is active?
Linking to the above; setting one form as active using form.Activate() should deactivate the others MdiChildren, but it is not - how can I deactivate the other windows in code?
Thanks for your time.
[Too long for a comment]
I am sick to the hind teeth with fighting C1. Esp. the Ribbon. I have confirmed with their support that they do use DoEvents() which they use to yield on their Gui threads. I am now going to switch to DevExpress which should be straight forward for my MVC application...
C1's use of DoEvents() messes up the normal flow of your application. DoEvents() is asynchronous which means it terminates before the application has actually processed any outstanding events, so if you're using it in a procedure with many sequential statements, calling DoEvents() causes a huge disturbance whenever it's called. This is what I think we are seeing when we perform our MDI operations, but we can never be sure without the C1 source code.
I hope this helps.
I have a requirement where I have to detect if the user is not doing on Application and Application is idle(for certain period of time) and in the meantime, i.e while the application is idle before device screen gets locked, I have to show some images one by one.
I have gone through MSDN documentation of PhoneApplicationService.UserIdleDetectionMode and PhoneApplicationService.ApplicationIdleDetectionMode but i didn't found anything helpful.
How can i detect that application is idle ?
Thanks in advance.
Detect that the application is NOT idle: Create a class containing a timer. When the timer fires, show the images. Whenever the user does ANYTHING on ANY page (detect this by e.g. overriding the manipulationstarted events), reset the timer to 0.
I am writing an application in c# to lock or freeze all programs untill user enters a value in the app's textbox and clicks ok.
The purpose of the app would be to get people to enter their time.
As far as I know you can set it to top most but they can end the app with task manager so am stuck here..
formName.TopMost = true;
Any help would be appreciated
Yes, that's correct. The Windows operating system allows multiple programs to run at one time. What you're experiencing is entirely by design.
If I remember correctly, the TopMost property applies only to windows in your process, and as you mention, it's all quite irrelevant: the user can still kill your application using the Task Manager.
There's no legitimate way of getting around that. It's not a "limitation", it's a feature. Any app that prevents itself from being closed by the Task Manager is treading dangerously closely on the category of software that we call malware. Nothing good can come out of pursuits like this.
Relevant reading: The arms race between programs and users
Perhaps a good compromise solution is to make your window/form actually top-most and disable the Close button so that the user knows they shouldn't try and close it. This is almost always enough to stop a user that is not determined to end your application by any means necessary, and that's about all you should ever be concerned with.
See the sample code here for how to make your window/form always appear on top of other running applications by setting the WS_EX_TOPMOST flag or toggling HWND_TOPMOST.
I've also already written a detailed answer here about disabling the Close button the correct way by setting the CS_NOCLOSE class style.
We have a C# .NET 3.5 UI client application that runs in a multiple monitor desktop environment (typically 4 screens) on Windows 7. Every so often, after running several of these applications, the screen stops redrawing.
Controls continue to be reactive to clicks or keypress and values can be updated programmatically, but the entire form is not redrawn to reflect any changes. For example buttons that are enabled/disabled based on state may be remain grayed out, but be reactive to clicks or vice versa. Buttons do not animate when clicked.
Workaround: minimizing and restoring the window appears to clear the problem. After this, the application begins to draw correctly.
The must frustrating aspect of this problem is that programmatically, everything appears to be running normally. No exceptions are caught in our logs. Nothing was visible in the system event logs. We have not found a way to detect this condition is happening yet.
Other miscellaneous aspects: logging uses log4net, server communication layer uses ZMQ
Update:
Calling form Invalidate() and Update() does not fix the problem.
When dragging the window between screens, it shows different values on each screen.
Minimize/restore still resolves the issue.
I can't be sure of anything without seeing the app and the code, but my best guess is someone calls .SuspendLayout() before a complicated update, and an exception (probably swallowed) prevents the code from ever reaching the corresponding .ResumeLayout(). To test this, try adding a button that calls .ResumeLayout() for the form.
It seems the solution is there:
1) http://blogs.msdn.com/b/alejacma/archive/2009/08/11/controls-won-t-get-resized-once-the-nesting-hierarchy-of-windows-exceeds-a-certain-depth-x64.aspx
2) http://support.microsoft.com/kb/2664641/en-us
I am having a very difficult time trying to debug/fix an application.
Briefly:
- I created a "wizard" type app that starts with the user taking a photograph (using the common dialog for photos)
If the user tries to use the text input window (SIP) (the little keyboard input window) after a photo is taken the event loop seems to hang - the event is not processed or is delayed for a while.
If the user does not take a picture the SIP keyboard works great.
This only happens on some of my devices. Specifically it is not a problem on an MC65 but is a problem on an ES400.
It appears that the app's event loop gets screwed up with the way I am displaying forms and taking photos.
If created a simple test app with single form containing a button (Event handler takes a photo) and a text box that accepts input. That works fine. But it is only a single form app that does nothing else.
When I combine the photo taking with my form displaying (making a "wizard" ) things go badly.
I wonder what kind of event loop should I be running?
Essentially the user takes a photo then goes through some forms (I hide one form and show another when they click the "next" button.)
The Form.Show is called from the main form after a picture is taken and then I have something like:
while(UserNotFinished)
{
Application.DoEvents()
}
Where UserNotFinished is a flag set from my wizard/forms after the "submit" button is pressed.
I will be happy to provide more code but not sure what would be useful.
I am new to C# and CF development (lots of years of C++/Win32)
The real confusing part is that this works on one device but not on another. In fact, the device hangs completely. It ends the activesync connection and sometimes I have to hard reset by removing the battery.
I think your problem stems from the while(true) { DoEvents(); } and perhaps how you are trying to go between forms. The only time I've used the DoEvents() method is when I'm already in the scope of a windows event and I need to be sure something in the message queue is processed so screen updates are correct. I'd suggest making a controller class to manage the screen flow for your wizard. You can control the screen flow by either using ShowDialog() and execute the flow control directly in the scope of a single call, or you'll have to use Show() and an asynchronous mechanism such as subscribing to and handling specific form and control events in the controller class. Also saw the comment about introducing another thread, beware that Forms belong to the thread they were created in and you must Invoke(...) all Form members in the context of the creating thread.
Hmm. Very strange
I started a new thread and basically call Application.DoEvents() in in as well and it seems to fix the problem...
I don't know why the
while(true)
{
DoEvents()
}
in the main thread doesn't work.