I am implementing WCF service that exposes a method whose [OperationContract] is [XmlSerializerFormat]. I sometimes get request whose body is not valid XML. In such cases I want to log the original body, so I can know why it didn't constitute valid XML. However, I can't get it from the Message object, see my attempts (by implementing IDispatchMessageInspector interface):
public object IDispatchMessageInspector.AfterReceiveRequest(ref Message request, IClientChannel channel, InstanceContext instanceContext)
{
request.ToString(); // "... Error reading body: System.Xml.XmlException: The data at the root level is invalid. Line 1, position 1. ..."
request.WriteBody(...); // Serialization Exception, also in WriteMessage and other Write* methods
request.GetReaderAtBodyContents(...); // Same
HttpRequestMessageProperty httpRequest = (HttpRequestMessageProperty)request.Properties[HttpRequestMessageProperty.Name]; // no body in httpRequest
}
When looking in watch, request.messageData appears to contain the body - but that's a private member.
How can I get the message buffer without trying to deserialize it?
Yes, you need custom MessageEncoder, unlike message inspectors (IDispatchMessageInspector / IClientMessageInspector) it sees original byte content including any malformed XML data.
However it's not trivial how to implement this approach. You have to wrap a standard textMessageEncoding as custom binding element and adjust config file to use that custom binding.
Also you can see as example how I did it in my project - wrapping textMessageEncoding, logging encoder, custom binding element and config.
For the opposite direction (I am writing a WCF client and the server returns invalid XML), I was able to extract the raw reply message in IClientMessageInspector.AfterReceiveReply by
accessing the internal MessageData property of reply via Reflection, and then
accessing its Buffer property, which is an ArraySegment<byte>.
Something similar might be available for the request message on the server side; so it might be worth examining the request variable in the debugger.
I'm aware that this is not exactly what you are asking for (since you are on the server side, not on the client side), and I'm also aware that using reflection is error-prone and ugly. But since the correct solution is prohibitively complex (see baur's answer for details) and this "raw dump" is usually only required for debugging, I'll share my code anyways, in case it is helpful to someone in the future. It works for me on .NET Framework 4.8.
public void AfterReceiveReply(ref Message reply, object correlationState)
{
object messageData = reply.GetType()
.GetProperty("MessageData",
BindingFlags.NonPublic | BindingFlags.Instance)
.GetValue(reply, null);
var buffer = (ArraySegment<byte>)messageData.GetType()
.GetProperty("Buffer")
.GetValue(messageData, null);
byte[] rawData =
buffer.Array.Skip(buffer.Offset).Take(buffer.Count).ToArray();
// ... do something with rawData
}
And here's the full code of the EndpointBehavior:
public class WcfLogger : IEndpointBehavior
{
public byte[] RawLastResponseBytes { get; private set; }
// We don't need these IEndpointBehavior methods
public void AddBindingParameters(ServiceEndpoint endpoint, BindingParameterCollection bindingParameters) { }
public void ApplyDispatchBehavior(ServiceEndpoint endpoint, EndpointDispatcher endpointDispatcher) { }
public void Validate(ServiceEndpoint endpoint) { }
public void ApplyClientBehavior(ServiceEndpoint endpoint, ClientRuntime clientRuntime)
{
clientRuntime.ClientMessageInspectors.Add(new MessageCaptureInspector(this));
}
internal class MessageCaptureInspector : IClientMessageInspector
{
private WcfLogger logger;
public MessageCaptureInspector(WcfLogger logger)
{
this.logger = logger;
}
public void AfterReceiveReply(ref Message reply, object correlationState)
{
// Ugly reflection magic. We need this for the case where
// the reply is not valid XML, and, thus, reply.ToString()
// only contains an error message.
object messageData = reply.GetType()
.GetProperty("MessageData",
BindingFlags.NonPublic | BindingFlags.Instance)
.GetValue(reply, null);
var buffer = (ArraySegment<byte>)messageData.GetType()
.GetProperty("Buffer")
.GetValue(messageData, null);
logger.RawLastResponseBytes =
buffer.Array.Skip(buffer.Offset).Take(buffer.Count).ToArray();
}
public object BeforeSendRequest(ref Message request, IClientChannel channel)
{
return null;
}
}
}
Usage:
var logger = new WcfLogger();
myWcfClient.Endpoint.EndpointBehaviors.Add(logger);
try
{
// ... call WCF method that returns invalid XML
}
catch (Exception ex)
{
Console.WriteLine(ex.ToString());
}
File.SaveAllBytes(#"C:\temp\raw_response.bin", logger.RawLastResponseBytes);
// Use the exception message and examine raw_response.bin with
// a hex editor to find the problem.
UPDATE
Some others that have run into this issue appear to have created a Customer Message Encoder.
A message encoding binding element serializes an outgoing Message and
passes it to the transport, or receives the serialized form of a
message from the transport and passes it to the protocol layer if
present, or to the application, if not present.
Related
I'm trying to consume a SOAP webservices provided by a third party. I don't have any control of that webservice. I'm consuming the webservice using a Low Code platform called OutSystems. OutSystems unfortunately doesn't recognize a SOAP header that has to be send with the request so I'll have to add it myself by extending the platform functionality with some custom c# code.
The SOAP Extensibility API gives me access to the WCF ClientCredentials, ServiceEndpoint, IClientChannel and CommunicationState objects. It also provides a method to register an endpoint behavior, using a IEndpointBehavior object.
Using svcutil I've been able to generate proxy classes for the data of the message, including the SOAP header that I should add.
Ideally I'm looking for a way to instantiate an object of the proxy of the header and then somehow pass that to the service. But here is where i'm stuck. I/m not able to find a way to use that object as a SOAP header.
The documentation of OutSytems also provides an example about adding a soap header using .net code. They use MessageHeader.CreateHeader to create a new element with a given element name, namespace and value. So this is also a place where i'm stuck. It would be great if I could use the proxy class here, but this will only allow me to set it as the value. This way I end up with a duplicate 'root' element.
Using the code below:
class AddSoapHeaderMessageInspector : IClientMessageInspector {
object IClientMessageInspector.BeforeSendRequest(ref Message request, IClientChannel channel) {
// before sending a request, add a new SOAP header, specifying its name, namespace and value
request.Headers.Add(MessageHeader.CreateHeader("MySoapHeader", "http://my-namespace.com", mySOAPHeader));
return request;
}
void IClientMessageInspector.AfterReceiveReply(ref Message reply, object correlationState) {
// here you would handle the web service response
}
}
Would result in XML like
<MySoapHeader><MySoapHeader><element1><element2></MySoapHeader></MySoapHeader>
While it should look like
<MySoapHeader><element1><element2></MySoapHeader>
The solution we have now is one where we've implemented a class that extends MessageHeader. In the OnWriteHeaderContents of that class we manually write the content of the header in code. Unfortunately this is cause some namespace issues at the server side.
I'm posting this on stackoverflow instead of the OutSystems forum because I consider this more of a WCF/C# question than an OutSystems question.
You can add soap header in the implementation class by implementing IClientMessageInspector interface.
public class ClientMessageLogger : IClientMessageInspector
{
public void AfterReceiveReply(ref Message reply, object correlationState)
{
}
public object BeforeSendRequest(ref Message request, IClientChannel channel)
{
MessageHeader header = MessageHeader.CreateHeader("MySoapHeader", "http://my-namespace.com", "asdas");
request.Headers.Add(header);
return null;
}
}
Add clientmessagelogger to clientruntime:
[AttributeUsage(AttributeTargets.Interface | AttributeTargets.Class, AllowMultiple = false)]
public class CustContractBehaviorAttribute : Attribute, IContractBehavior, IContractBehaviorAttribute
{
public Type TargetContract => throw new NotImplementedException();
public void AddBindingParameters(ContractDescription contractDescription, ServiceEndpoint endpoint, BindingParameterCollection bindingParameters)
{
return;
}
public void ApplyClientBehavior(ContractDescription contractDescription, ServiceEndpoint endpoint, ClientRuntime clientRuntime)
{
clientRuntime.ClientMessageInspectors.Add(new ClientMessageLogger());
}
public void ApplyDispatchBehavior(ContractDescription contractDescription, ServiceEndpoint endpoint, DispatchRuntime dispatchRuntime)
{
}
public void Validate(ContractDescription contractDescription, ServiceEndpoint endpoint)
{
return;
}
}
Add Attribute to Interface of proxy class:
[CustContractBehavior]
public interface IService {
}
This is the soap message received by the server:
To learn more about IClientMessageInspector, please refer to the following link:
https://learn.microsoft.com/en-us/dotnet/api/system.servicemodel.dispatcher.iclientmessageinspector?view=dotnet-plat-ext-3.1
I have a set of WCF SOAP web services. A few of the service operations allows users to submit data. I want to log the payload from these requests to a SQL Server database. For clients that just read data, I only want to log simple metadata.
This is my data model:
I have a class that implements the IParameterInspector interface. All service operations requests are logged in the BeforeCall method: time of request, operation name, userid and target endpoint.
public class LogParameterInspector : IParameterInspector
{
private static WebServiceLog WebServiceLog = WebServiceLog.GetInstance();
private bool IsOperationIgnorable(string operationName)
{
//Ignore GETs for service metadata
return string.Equals(operationName, "get", StringComparison.InvariantCultureIgnoreCase);
}
public void AfterCall(string operationName, object[] outputs, object returnValue, object correlationState)
{
if (IsOperationIgnorable(operationName))
return;
SsnWebServiceContext.Current.Response.CreatedDate = DateTime.Now;
//Calls stored procedure
WebServiceLog.LogServerResponseToDb(SsnWebServiceContext.Current.Response);
}
public object BeforeCall(string operationName, object[] inputs)
{
if (IsOperationIgnorable(operationName))
return null;
SsnWebServiceContext.Current.Request.CreatedDate = DateTime.Now;
SsnWebServiceContext.Current.Request.OperationName = operationName;
foreach (var item in inputs)
{
if (item == null) continue;
if (item.GetType().GetInterfaces().Any(x => x.IsGenericType && x.GetGenericTypeDefinition() == typeof(IRequest<>)))
{
var header = item
.GetType()
.GetProperties()
.Single(p => p.Name == "Header")
.GetValue(item, null) as IRequestHeader;
SsnWebServiceContext.Current.Request.UserIdentification = header?.UserName;
}
}
//Calls stored procedure
WebServiceLog.LogClientRequestToDb(SsnWebServiceContext.Current.Request);
return null;
}
}
The message payload is explicitly logged in the few service operations that require it. (Calling the same stored procedure as in BeforeCall. The procedure checks if a record with the given GUID already exists, and if so, updates it).
I have a class that implements IExtension<OperationContext>. This class gives me access to request/response data through the lifetime of a request.
public class SsnWebServiceContext : IExtension<OperationContext>
{
//Helper property for syntax purposes
public static SsnWebServiceContext Current => OperationContext.Current.Extensions.Find<SsnWebServiceContext>();
//Called when extension is added to OperationContext. Useful for initializing stuff.
public void Attach(OperationContext owner)
{
var tmp = Guid.NewGuid();
Request = Request ?? new ClientRequest();
Request.SetReadOnlyGuid(tmp);
Response = Response ?? new ServerResponse();
Response.SetReadOnlyGuid(tmp);
}
//Called when extension is removed from OperationContext. Use for for cleanup.
public void Detach(OperationContext owner)
{
}
public ClientRequest Request { get; set; }
public ServerResponse Response { get; set; }
}
My custom context is added to OperationContext through a class that implements IDispatchMessageInspector. This is also where I create a copy of the message stream for future reference.
public class ContextDispatchMessageInspector : IDispatchMessageInspector
{
public object AfterReceiveRequest(ref Message request, IClientChannel channel, InstanceContext instanceContext)
{
using (var buffer = request.CreateBufferedCopy(int.MaxValue))
{
OperationContext.Current.Extensions.Add(new SsnWebServiceContext
{
Request = new ClientRequest
{
Message = buffer.CreateMessage(),
TargetRole = OperationContext.Current.IncomingMessageHeaders?.To?.ToString()
}
});
request = buffer.CreateMessage();
}
return null; //Correlation state passed to BeforeSendReply
}
public void BeforeSendReply(ref Message reply, object correlationState)
{
OperationContext.Current.Extensions.Remove(SsnWebServiceContext.Current);
}
}
All my endpoints are configured for basicHttpBinding with the following settings:
<bindings>
<basicHttpBinding>
<binding name="SSNBinding" maxBufferSize="2147483647" maxReceivedMessageSize="2147483647" >
<security mode="None"></security>
</binding>
</basicHttpBinding>
</bindings>
Problem:
The logging works fine, except for larger messages. When I try to view some of the XML messages in SSMS, I get the following error:
If I copy the XML content into a text editor, it's clear that the entire message has not been logged. I have found that this occurs only for requests where users are uploading files bigger than around 2MB. Files are uploaded as base64 encoded strings, and the logged XML content is truncated somewhere in the middle of the encoded string.
Weirdly (to me) the file seems to have been transferred successfully, even if it hasn't been logged completely. I've reproduced the behaviour locally, using SOAP UI and base64 encoding a large image: The request took a while (timed out after 1 minute in SOAP UI), but still completed succesfully some time later; I downloaded and viewed the image, and it was not corrupt. I got the same result with a large Word document.
Any suggestions on what I can do to prevent my logs from being truncated would be highly appreciated!
Your problem is not that the data is truncated in the table, but that SSMS limits the size of data in the output. So do not worry about missing data. your code is fine. That's why no errors are reported.
To check read the data using code (using plain ADO.Net for example), you will see that all the data is stored.
See some solutions:
http://blog.extreme-advice.com/2013/03/05/error-fix-unable-to-show-xml-the-following-error-happened-there-is-an-unclosed-literal-string/
https://www.mssqltips.com/sqlservertip/2795/prevent-truncation-of-dynamically-generated-results-in-sql-server-management-studio/
SQL Server truncation and 8192 limitation
I'm trying to log all outbound requests that go to service references, including the full request and response body. I thought I had a solution using behaviorExtensions but, after deploying, it became clear that the extension was shared between multiple requests.
Here's my current code:
public class LoggingBehaviorExtender : BehaviorExtensionElement
{
public override Type BehaviorType => typeof(LoggingRequestExtender);
protected override object CreateBehavior() { return new LoggingRequestExtender(); }
}
public class LoggingRequestExtender : IClientMessageInspector, IEndpointBehavior
{
public string Request { get; private set; }
public string Response { get; private set; }
#region IClientMessageInspector
public virtual object BeforeSendRequest(ref System.ServiceModel.Channels.Message request, System.ServiceModel.IClientChannel channel)
{
Request = request.ToString();
Response = null;
return null;
}
public virtual void AfterReceiveReply(ref System.ServiceModel.Channels.Message reply, object correlationState)
{
Response = reply.ToString();
}
#endregion
#region IEndpointBehavior
public void AddBindingParameters(ServiceEndpoint endpoint, BindingParameterCollection bindingParameters) { }
public void ApplyClientBehavior(ServiceEndpoint endpoint, ClientRuntime clientRuntime)
{
clientRuntime.MessageInspectors.Add(this);
}
public void ApplyDispatchBehavior(ServiceEndpoint endpoint, EndpointDispatcher endpointDispatcher) { }
public void Validate(ServiceEndpoint endpoint) { }
#endregion
}
Then, when I reach the point to log, I extract the behavior...
var lre = client.Endpoint.Behaviors.OfType<LoggingRequestExtender>().FirstOrDefault();
var req = lre?.Request;
var resp = lre?.Response;
Adding debugging logging to the LoggingRequestExtender, I found it was only instantiated once for multiple requests.
Is there a way to make sure this behavior class is instantiated fresh for each thread? Or is there a better way of getting the full request / response body when making service calls?
Edit / Partial answer:
Since writing this I have discovered that the value returned by BeforeSendRequest is passed into AfterReceiveReply as the correlationState so I can connect the request and response using a guid:
public virtual object BeforeSendRequest(ref System.ServiceModel.Channels.Message request, System.ServiceModel.IClientChannel channel)
{
var guid = Guid.NewGuid();
WebServiceLog.LogCallStart(guid, channel.RemoteAddress.ToString(), request.ToString());
return guid;
}
public virtual void AfterReceiveReply(ref System.ServiceModel.Channels.Message reply, object correlationState)
{
Guid guid = (Guid)correlationState;
WebServiceLog.LogCallEnd(guid, reply.ToString());
}
I see two flaws to this approach. One, which is livable, is that this requires a log insert and then update rather than a single insert.
The second is more of an issue: In the case of an exception (e.g. timeout), we never hit AfterRecieveSupply so the log doesn't know what happened. I can separately log the exception...
try
{
response = client.SomeFunction(request);
}
catch (Exception ex)
{
AppLog.Error("Some function failed", ex);
}
... but I can't see a way of accessing the guid outside of BeforeSendRequest / AfterReceiveReply so I have nothing to tie the exception log to the service request log.
There are several approaches to this.
1, The situation you have described with having to log calls separately doesn't have to be like that. If your WCF service is in a non load balanced server just add the request to a MemoryCache using the Guid as a key. When the request comes in then pull off the request and log in one go. To capture the timed out calls you could run a process on a thread that would check the MemoryCache every x minutes to pull out and log (using an adequate lock to ensure thread saftey).
If the WCF service is in a load balanced environment then all you do is the same as above but store to a no sql type data store.
2, Is the code that makes the outbound calls within your scope for change? If so, you can forgo creating a behavior extension and create a bespoke message logger instead. Using a class that implements IDisposable you can write nice code like this..
RequestMessage request = new RequestMessage();
ResponseMessage response = null;
using (_messageLogger.LogMessage(request, () => response, CallContextHelper.GetContextId(), enabled))
{
response = _outboundService.DoSomething(request);
}
This will then not need another process to capture any timed out threads which will be handled in the dispose method.
If you need more clarity then let me know, hopefully this helps you...
Problem: As part of a debugging a problem regarding some validation issues I would like to read the XML request of an WCF webservice.
Apparently, this is more difficult than it appears and any help in this regard would be much appreciated. Below are what I've tried already. Much like the answer to a similar question here on StackOverflow (link).
My solution: I've created the client setting the endpoint given by the provider of the webservice. I've added my client credentials as an endpoint behavior. Right before I make the call to service I add another endpoint behavior to write the request and response as XML-files. Alas, to no avail.
The simple call to the webservice:
public SaveAvailabilityAssessmentResponseType SaveAvailabilityAssessment(SaveAvailabilityAssessmentRequestType request)
{
Client.Endpoint.Behaviors.Add(new CustomEndpointBehavior());
return Client.SaveAvailabilityAssessment(_ocesCertHeader, _activeOrganisationHeader, request);
}
And here are the CustomEndpointBehavior class (simplified a bit):
public class CustomEndpointBehavior : IEndpointBehavior
{
public void ApplyClientBehavior(ServiceEndpoint endpoint, System.ServiceModel.Dispatcher.ClientRuntime clientRuntime)
{
clientRuntime.MessageInspectors.Add(new MessageExpector());
}
}
And here's the MessageExpector class:
internal class MessageExpector : IClientMessageInspector
{
public void AfterReceiveReply(ref Message reply, object correlationState)
{
using (var sw = new StreamWriter(#"C:\temp\response.xml"))
{
sw.WriteLine(reply);
}
}
public object BeforeSendRequest(ref Message request, IClientChannel channel)
{
using (var sw = new StreamWriter(#"C:\temp\request.xml"))
{
sw.WriteLine(request);
}
return new object();
}
}
Can anyone tell me what I'm missing?
Edit: Further debugging has showed, that the code in the CustomEndpointBehavior hasn't been activated. It is as if the customendpoint hasn't been added to the client's endpoint behaviors. But how can that be?
You can configure message logging without modifying your code. Here's a link to documentation.
You can use SvcTraceViewer.exe for viewing this logs
I have created a custom implementation of the IDispatchMessageInspector interface, and my code is working 99% fine.
My problem is that I need to free some managed objects when the WCF service host is killed and/or frees an instance of my class. My objects to free implement IDisposable but they aren't being disposed. I've been through the MSDN library (more confused) and the SO archives, but haven't found anything that addresses the question "When/where does a WCF service host destroy MessageInspectors?"
Do I need to hook an event someplace? Do I need to implement something even more arcane from the ServiceModel namespace?
Can anyone give me a pointer in the right direction?
Edit 1: Clarifications
At the moment, I am running in the IDE using the automatic webserver. I am not ultimately in control of the host once in production, could be any of the valid server host choices.
The MyCore.My and MyCore.MyProperties objects are the ones I am trying to dispose of when the WCF server host is killed/bounced.
Even when I have killed the webserver processes (those things in the Taskbar) the Dispose() is never called.
Edit 2: Code snippets added.
using /* snip */
using MyCore = Acme.My;
namespace My.SOAP
{
public class MyMessageInspector : IDispatchMessageInspector
{
protected static MyCore.My _My;
protected static MyCore.MyProperties _MyProps;
protected static ConcurrentDictionary<string, MyCore.AnotherSecretThing> _anotherSecretThings = new ConcurrentDictionary<string, MyCore.AnotherSecretThing>();
protected static void InitMy()
{
if (_My != null) return;
_MyProps = new MyCore.MyProperties();
MyCore.MySqlDatabaseLogger logger = new MyCore.MySqlDatabaseLogger(_MyProps);
_My = new MyCore.My(logger);
}
public MyMessageInspector()
{
InitMy();
}
public object AfterReceiveRequest(ref System.ServiceModel.Channels.Message request, System.ServiceModel.IClientChannel channel, System.ServiceModel.InstanceContext instanceContext)
{
MyMessageHeader header = null;
try
{
// find My header
Int32 headerPosition = request.Headers.FindHeader(MyMessageHeaderKey.MyHeaderElementName, MyMessageHeaderKey.MyNamespace);
// get reader
XmlDictionaryReader reader = request.Headers.GetReaderAtHeader(headerPosition);
// get My header object
header = MyMessageHeader.ReadHeader(reader);
// add to incoming messages properties dictionary
OperationContext.Current.IncomingMessageProperties.Add(MyMessageHeaderKey.MyHeaderElementName, header);
}
catch (Exception ex)
{
// log via ExceptionHandlingBlock
}
MyCore.SecretThings SecretThings = CreateSecretThings(/* snip */);
return SecretThings.Id;
}
public void BeforeSendReply(ref System.ServiceModel.Channels.Message reply, object correlationState)
{
MyCore.SecretThings req = _My.GetSecretThingsOnThread();
// if we didn't find the SecretThings, there is nothing to stop() and no data to put in the MessageHeaders
if (req == null) return;
MessageBuffer buffer = reply.CreateBufferedCopy(Int32.MaxValue);
reply = buffer.CreateMessage();
var MyHeader = new MyMessageHeader(/* snip */);
reply.Headers.Add(MyHeader);
req.Stop(MyCore.Status.SUCCESS);
}
protected MyCore.SecretThings CreateSecretThings(string key, Dictionary<string, string> ids)
{
/* snip */
return _My.GetSecretThings(/* snip */);
}
}
}
I've been having a look at the DispatchMessageInspector and how it is implemented.
As you probably know you register your MessageInspectors with an IEndpointBehavior (adding endpoint behaviours through configuration or code). You create an instance of your DispatchMessageInspector within the EndpointBehaviour.
public class MyBehaviour : IEndpointBehavior
{
public void AddBindingParameters(ServiceEndpoint endpoint,
System.ServiceModel.Channels.BindingParameterCollection
bindingParameters)
{
}
public void ApplyClientBehavior(ServiceEndpoint endpoint, ClientRuntime clientRuntime)
{
}
public void ApplyDispatchBehavior(ServiceEndpoint endpoint, EndpointDispatcher endpointDispatcher)
{
var inspector = new SampleMessageInspector(); //register
endpointDispatcher.DispatchRuntime.MessageInspectors.Add(inspector);
}
public void Validate(ServiceEndpoint endpoint)
{
}
}
According to http://msdn.microsoft.com/en-us/magazine/cc163302.aspx Endpoint behaviours are registered by the Service Host
These behavior collections are automatically populated during the ServiceHost and ChannelFactory construction process with any behaviors that are found in your code (via attributes) or within the configuration file (more on this shortly). You can also add behaviors to these collections manually after construction. The following example shows how to add the ConsoleMessageTracing to the host as a service behavior:
ServiceHost host = new ServiceHost(typeof(ZipCodeService));
host.Description.Behaviors.Add(new ConsoleMessageTracing());
And further dictates that the ServiceHost has a lifetime as long as the service...
ServiceHost extension objects remain in memory for the lifetime of the ServiceHost while InstanceContext and OperationContext extension objects only remain in memory for the lifetime of the service instance or operation invocation. Your custom dispatcher/proxy extensions can use these collections to store (and look up) user-defined state throughout the pipeline.
I'm assuming this is why your objects within your MessageInspectors are never being destroyed.
Some would see it as an anti-pattern but I would possibly recommend a ServiceLocator that your MessageInspectors can use to retrieve objects. You could then look at setting their lifetime as long as its parent usage?
public class SampleMessageInspector : IDispatchMessageInspector
{
public object AfterReceiveRequest(ref System.ServiceModel.Channels.Message request, IClientChannel channel, InstanceContext instanceContext)
{
var objectToDispose = ServiceLocator.Current.GetInstance<ObjectToDispose>();
//do your work
return null;
}
public void BeforeSendReply(ref System.ServiceModel.Channels.Message reply, object correlationState)
{
//do some other work
}
}
To follow on from what i've mentioned...
As an example this post mentions using Ninject as the IoC container and set the life time of your objects as the lifetime of the WCF service
Bind(...).To(...).InScope(() => OperationContext.Current)
Ninject WCF Garbage Collection on repositories
You could then get access to the Ninject Kernal through the ServiceLocator and the objects (_MyProperties etc...) would be disposed off