I want to debug an empty WebApi Project based on .NET Core 2.2.
I installed the "Core 2.2 SDK x86" and changed the target framework to 2.2:
<Project Sdk="Microsoft.NET.Sdk.Web">
<PropertyGroup>
<TargetFramework>netcoreapp2.2</TargetFramework>
</PropertyGroup>
When I started to debug this project, IIS starts, but in the route api/values I see nothing (it loads forever) and I get this error:
The target process exited without raising a CoreCLR started event.Ensure that the target process is configured to use .NET Core. This may be expected if the target process did not run on .NET Core
In my solution WPF and Class Library projects exist. I wanted to make a WebApi for it. Like I said, it's an empty base project generated by Visual Studio 2019. I just installed Core 2.2. Why do I get that error and what am I doing wrong?
I had the same issue.
I ran Program.cs file from the command line and the error message was different.
So, apparently, I didn't have the appropriate .NET Core runtime installed.
You can download it by the following link - https://dotnet.microsoft.com/download
I was facing the same issue!
I updated my Visual Studios to the most recent via the VS Installer.
While updating, I also added the following VS Workloads:
ASP.NET and web development
.NET desktop development
See about workloads here:
https://github.com/MicrosoftDocs/visualstudio-docs/blob/master/docs/install/modify-visual-studio.md
This worked for me! 😊
I did not have to downgrade or remove anything
I had to do a "clean" and "rebuild" of the project and after that it worked again.
I ran with the same problem. But for me it was that my project was running in .NET Core 2.2, which I didn't have installed. I'm using VS 2019.
So for the solution, just go to Visual Studio Installer and for your VS 2019 hit "Modify" like in the following image (it's in spanish though):
Then, click "Individual Components", like
And then, make sure you checked in ".NET Core 2.2 Runtime (EOL)" (and above like .NET Core 3.0, if you want) and click "Modify", as shown
Hope this works for you.
In my case, switching to x64 save the day.
It seems like there are lots of different causes for this. For me, it was because I had upgraded a .csproj file but I hadn't updated the image used in my docker file.
I had same issue after package upgrading. You don't need any vs update.
Just go to
dotnet.microsoft.com/download/dotnet-core/2.2
and get runtime
dotnet-hosting-2.2.7-win.
I had the same error. Remove "Microsoft.AspNetCore.All" from dependencies.
I have downgraded "Microsoft.AspNetCore.App" version and error gone .
Deleting all bin folders of my solution
building everything again did the trick for me
(.NET Core 3.1 VS 2019)
I see many answers like try and error
after searching about the issue, I got the following :
it simply depends on three parameters and they have to be compatible
Windows platform "x86,x64" you can change it from the CPU option of the visual studio
or choose any CPU hence the install .net x framework should be compatible with the windows
The target framework for the project
(check the project target framework "right-click on the project and check target framework") if it is 5 so the enabled in the third parameter should be 5 or change this one but take care you should tell the other team members if you change it
The Enabled framework go for tools and get tools and go for individuals component and chose the target framework the same as found in step 2 and press modify
Faced this issue during xUnit testing. Downgrading nuget package "Microsoft.NET.Test.Sdk" to 15.9.0 worked for me
I got this error because of a Project reference pointing to a project, that did not exist anymore (was removed in merged git-commit). Solved it by right-clicking the project, then Edit Project File, delete the reference and save.
I was trying to run a project that used net core 2.2 but I didn't have it, and there was no error(I had 1.1), so after installing the 2.2 using the "Visual Studio Installer" it worked like a charm. =)
I restarted my Visual Studio instance in Admin mode and I was able to debug.
After closing Visual Studio I can now start in normal mode and debug as expected. I'm not sure what changed though.
I was missing a reference to AWSSDK.Core. After installing the specific version and re-starting VS2019 and rebuilding, the project ran fine.
All of a sudden it stopped working. For me clean solution and re-build solution worked.
I was getting a similar error with my project: The target process exited without raising a CoreCLR started event.
My startup project was targeting multiple frameworks: netstandard2.0;netcoreapp2.2
I fixed this issue by changing my target framework from netstandard2.0 to netcoreapp2.2 using the following stackoverflow directions: How to switch between target frameworks for .NET Core projects in Visual Studio
Be sure to install the exact version of .net core that you want your project to run on
I had this issue and finally tracked it down to doing a "publish" operation with a deployment mode of: "Self contained" That resulted in dropping all .NET runtime binaries in my bin directory. Where I think things got totally messed up is I have several solutions all using that same common bin directory, each build different exe's and dll's.
Only one was for a self contained deployment as a test. I think that started mixing up some of the minor dlls for the .NET core and causing this issue. Once I purged all the dll's that were "not mine" and rebuilt things started working again. I'm using Visual Studio 2019 16.8.2 / .NET Core 3.1
I realize the original question is regarding .NET Core 2.2 but this question comes up first when searching for the main issue.
.Net Core 2.2 is required to be installed. I fixed when I added this in Visual Studio Installer.
VS2019 16.7.1 ASP.Net Core 3.1
Our Nunit test projects that issued this error, only worked with a very select set of Nunit and Microsoft packages.
Microsoft.NET.Test.sdk - 16.5
Nunit - 3.12
Nunit3TestAdapter 3.16.1
But here's the catch, you have to go into
c:\users\yourname\.nuget\packages and look for all three folders shown above. If you find any other version in those folders, delete it.
I found two versions in the Microsoft.NET.Test.SDK folder. I suspect the newer version was being loaded. Why? Because when I deleted it everything ran fine.
A corrupt layout is also possible, had this happen myself. To fix, go to projpath\bin\x64\configtype\AppX, for example:
C:\Users\Foo\Documents\Visual Studio 2019\projectname\bin\x64\Debug\AppX
Delete everything here, rebuild and you're good to go.
Since I don't see it here yet, here's what worked for me. I have a UWP project, Win32 project, and Windows application packaging project in the same solution. Running the Win32 app using FullTrustProcessLauncher.LaunchFullTrustProcessForCurrentAppAsync was giving this message and not working.
What fixed it was changing a setting in the packaging project's project settings:
Debug -> Debugger type -> Background task process: Native Only
I had same issue. Now in VS2022 you cannot download NetCore2.2.
So just download and install NetCore 2.2 from microsoft dotnet website.
https://dotnet.microsoft.com/en-us/download/dotnet/2.2
This error occurred when I tried changing C# projects in my solution to use Docker and running it:
The error went away when I changed the C# projects back to use the Visual Studio's debug server and running it:
In the Test Explorer window of Visual Studio 2019, make sure that there are no references to any *.testsettings or *.runsettings files if you are not using them intentionally. I had referenced a *.testsettings file unintentionally, and that was causing the issue.
For me, I'd just installed Visual Studio 2022 on a fresh installation of Windows 11. My project uses .Net 5, which wasn't installed by default (I only had .Net 6). I simply used the Visual Studio installer, modified my VS2022, selected Individual Components, and enabled .Net 5. Viola!
I started to get this error after updating Visual Studio from 2019 to 2022. It turned out that the project target framework was set to .Net Core 3.1, which was removed when I uninstalled VS2019, and the solution was to change it to .Net 6.0 which is the component I had selected during installation (Installing .Net Core 3.1 from the Visual Studio Installer should work as well).
To do so, right click on the project name and look for the "Target framework" option (my installation is in Spanish so that's what I presume it should say).
I've encountered this issue multiple times, using VS 2017 and VS 2019 across .NET Core 2.1, 3.1 and 5.0.
There are many conditions that can cause this problem to occur:
Microsoft Update can install a version of .Net Core at any time, automatically and outside of your awareness and knowledge.
It can also change the installation of any .Net Core SDK version's installed components.
Your version of VS has to be compatible with the version of the .Net Core SDK that you have installed.
You must have all of the following components installed for this error to be resolved/pre-empted for .NET 5.0 (please check the dotnet 5.0 site for the compatibility list by versions).
Microsoft .NET SDK 5.0.408 which includes (the following below) must all be installed and listed in the control panel:
.NET Core 5.0.17 Windows Desktop Runtime,.NET Runtime, Windows Server Hosting, Shared Framework
If any .NET Core 3.1 SDK are installed without your knowledge, you must uninstall it and repair your targeted .net core version's installation.
I have developed a Windows Form application in .Net C# using visual studio 2013. I am very sure that I have selected .Net framework version 3.5 while creating the project, so that it can install on Windows XP sp3 as well.
I have created the setup file using Visual Studio installer plugin. But when I have tried to install it in a machine which have windows xp sp3 with .net framework installed, there is an error showing that it is required .net framework 4.5 to run this application.
I have tried recreating the app, but it didn't work.
Alryt.. I have figured it out myself...
Thank you dennis.. you gave me the clue...
It have to select from setup project properties--> Prerequisites...
that worked for me... :)
In Visual Studio, right-click your project (not the solution, but rather the concrete project), go to properties, select the "Application"-ledger and check what is selected as Target Framework. You should be able to select .Net Framework 3.5 as build target.
Right click on Setup Project > View > Launch Conditions. Over here, it was already referring to .Net Framework, Right click on it > Properties, change the version to .Net Framework 3.5. It solved the problem.
I have a program in C# that was developed on a PC that has several of installed .NET frameworks, Service Packs, etc. How can I understand what are the minimal installation requirements in order to distribute the program to users? Should I start with a clean PC and test one-by-one .NET frameworks or is there a better approach?
Start by looking at the .NET version that your application is targeting.
If for example, you are targeting .NET 3.5 you will need to also include .NET 2.0
.NET 4.0 and 4.5 are self contained, so including earlier versions is not necessary for them.
You can check the version that you are targeting by going to the properties of your project (right click, properties in the solution explorer), clicking on the Build tab and looking for Target Framework
Microsoft recommends that you look for features that your application requires in the operating systems rather than look for which version of Windows you are targeting. So its better to list those out and tackle them one by one. I find this to be a bit overkill sometimes, but it does help once you get to logo certification.
check Target Framework in your Project Properties
Note :- Step for open project Solution
(Open Your Project in Visual Studio and then open solution explorer and Right click on Properties)
Some link to more Help you
1 : Retrieve Target Framework Version and Target Framework Profile from a .Net Assembly
2 : How to find the .NET framework version of a Visual Studio project?
if i have an application that requires .net 3.0, what is the proper way to make an install file out of it, that will install the application and then install (activate) the .net 3.0? i tried publishing my project through visual studio 2008 (c#) which created the installer and the .net activator, but it didn't work properly on computers other than my own, when the .net 3.0 was not present.
i though i could bundle http://www.microsoft.com/downloads/details.aspx?FamilyID=10CC340B-F857-4A14-83F5-25634C3BF043&displaylang=en with the application, which would download and install .net 3.0 if needed. this could work ok on non-vista systems, but on vista, the redist package reports an error: you must use turn windows features on or off in the control panel to install or configure microsoft .net framework 3.0
The key is to install the .net framework if it is not there - regardless of the OS. Also, just go ahead and install the .Net 3.5 framework if you are going to install one of them.
Anyway, if you are using the built in installer that comes with Visual Studio, this is a real pain in the butt. You would be better off, and saner if you went with a different installer package. Install Shield, Wise, InstallAware will all do it for you. I believe you can also find better guidance on how to do this with Wix and NullSoft Installer.
http://www.improve.dk/blog/2007/06/10/creating-a-dotnet-bootstrapped-installer-using-nsis
How can I detect .NET 3.5 in WiX?
Windows Vista has already .NET Framework 3.0 installed.
Now if you wanted for example to have .NET Framework 3.5 installed you could create a Setup Project and then right click and go to View->Launch Conditions. There will be a .NET Framework launch condition where you can specify the required version of the framework and an URL to download from.
Here's a post about Launch Conditions in a Setup Project.