Related
In my C#/XAML metro app, there's a button which kicks off a long-running process. So, as recommended, I'm using async/await to make sure the UI thread doesn't get blocked:
private async void Button_Click_1(object sender, RoutedEventArgs e)
{
await GetResults();
}
private async Task GetResults()
{
// Do lot of complex stuff that takes a long time
// (e.g. contact some web services)
...
}
Occasionally, the stuff happening within GetResults would require additional user input before it can continue. For simplicity, let's say the user just has to click a "continue" button.
My question is: how can I suspend the execution of GetResults in such a way that it awaits an event such as the click of another button?
Here's an ugly way to achieve what I'm looking for: the event handler for the continue" button sets a flag...
private bool _continue = false;
private void buttonContinue_Click(object sender, RoutedEventArgs e)
{
_continue = true;
}
... and GetResults periodically polls it:
buttonContinue.Visibility = Visibility.Visible;
while (!_continue) await Task.Delay(100); // poll _continue every 100ms
buttonContinue.Visibility = Visibility.Collapsed;
The polling is clearly terrible (busy waiting / waste of cycles) and I'm looking for something event-based.
Any ideas?
Btw in this simplified example, one solution would be of course to split up GetResults() into two parts, invoke the first part from the start button and the second part from the continue button. In reality, the stuff happening in GetResults is more complex and different types of user input can be required at different points within the execution. So breaking up the logic into multiple methods would be non-trivial.
You can use an instance of the SemaphoreSlim Class as a signal:
private SemaphoreSlim signal = new SemaphoreSlim(0, 1);
// set signal in event
signal.Release();
// wait for signal somewhere else
await signal.WaitAsync();
Alternatively, you can use an instance of the TaskCompletionSource<T> Class to create a Task<T> that represents the result of the button click:
private TaskCompletionSource<bool> tcs = new TaskCompletionSource<bool>();
// complete task in event
tcs.SetResult(true);
// wait for task somewhere else
await tcs.Task;
When you have an unusual thing you need to await on, the easiest answer is often TaskCompletionSource (or some async-enabled primitive based on TaskCompletionSource).
In this case, your need is quite simple, so you can just use TaskCompletionSource directly:
private TaskCompletionSource<object> continueClicked;
private async void Button_Click_1(object sender, RoutedEventArgs e)
{
// Note: You probably want to disable this button while "in progress" so the
// user can't click it twice.
await GetResults();
// And re-enable the button here, possibly in a finally block.
}
private async Task GetResults()
{
// Do lot of complex stuff that takes a long time
// (e.g. contact some web services)
// Wait for the user to click Continue.
continueClicked = new TaskCompletionSource<object>();
buttonContinue.Visibility = Visibility.Visible;
await continueClicked.Task;
buttonContinue.Visibility = Visibility.Collapsed;
// More work...
}
private void buttonContinue_Click(object sender, RoutedEventArgs e)
{
if (continueClicked != null)
continueClicked.TrySetResult(null);
}
Logically, TaskCompletionSource is like an async ManualResetEvent, except that you can only "set" the event once and the event can have a "result" (in this case, we're not using it, so we just set the result to null).
Here is a utility class that I use:
public class AsyncEventListener
{
private readonly Func<bool> _predicate;
public AsyncEventListener() : this(() => true)
{
}
public AsyncEventListener(Func<bool> predicate)
{
_predicate = predicate;
Successfully = new Task(() => { });
}
public void Listen(object sender, EventArgs eventArgs)
{
if (!Successfully.IsCompleted && _predicate.Invoke())
{
Successfully.RunSynchronously();
}
}
public Task Successfully { get; }
}
And here is how I use it:
var itChanged = new AsyncEventListener();
someObject.PropertyChanged += itChanged.Listen;
// ... make it change ...
await itChanged.Successfully;
someObject.PropertyChanged -= itChanged.Listen;
Ideally, you don't. While you certainly can block the async thread, that's a waste of resources, and not ideal.
Consider the canonical example where the user goes to lunch while the button is waiting to be clicked.
If you have halted your asynchronous code while waiting for the input from the user, then it's just wasting resources while that thread is paused.
That said, it's better if in your asynchronous operation, you set the state that you need to maintain to the point where the button is enabled and you're "waiting" on a click. At that point, your GetResults method stops.
Then, when the button is clicked, based on the state that you have stored, you start another asynchronous task to continue the work.
Because the SynchronizationContext will be captured in the event handler that calls GetResults (the compiler will do this as a result of using the await keyword being used, and the fact that SynchronizationContext.Current should be non-null, given you are in a UI application), you can use async/await like so:
private async void Button_Click_1(object sender, RoutedEventArgs e)
{
await GetResults();
// Show dialog/UI element. This code has been marshaled
// back to the UI thread because the SynchronizationContext
// was captured behind the scenes when
// await was called on the previous line.
...
// Check continue, if true, then continue with another async task.
if (_continue) await ContinueToGetResultsAsync();
}
private bool _continue = false;
private void buttonContinue_Click(object sender, RoutedEventArgs e)
{
_continue = true;
}
private async Task GetResults()
{
// Do lot of complex stuff that takes a long time
// (e.g. contact some web services)
...
}
ContinueToGetResultsAsync is the method that continues to get the results in the event that your button is pushed. If your button is not pushed, then your event handler does nothing.
Simple Helper Class:
public class EventAwaiter<TEventArgs>
{
private readonly TaskCompletionSource<TEventArgs> _eventArrived = new TaskCompletionSource<TEventArgs>();
private readonly Action<EventHandler<TEventArgs>> _unsubscribe;
public EventAwaiter(Action<EventHandler<TEventArgs>> subscribe, Action<EventHandler<TEventArgs>> unsubscribe)
{
subscribe(Subscription);
_unsubscribe = unsubscribe;
}
public Task<TEventArgs> Task => _eventArrived.Task;
private EventHandler<TEventArgs> Subscription => (s, e) =>
{
_eventArrived.TrySetResult(e);
_unsubscribe(Subscription);
};
}
Usage:
var valueChangedEventAwaiter = new EventAwaiter<YourEventArgs>(
h => example.YourEvent += h,
h => example.YourEvent -= h);
await valueChangedEventAwaiter.Task;
Stephen Toub published this AsyncManualResetEvent class on his blog.
public class AsyncManualResetEvent
{
private volatile TaskCompletionSource<bool> m_tcs = new TaskCompletionSource<bool>();
public Task WaitAsync() { return m_tcs.Task; }
public void Set()
{
var tcs = m_tcs;
Task.Factory.StartNew(s => ((TaskCompletionSource<bool>)s).TrySetResult(true),
tcs, CancellationToken.None, TaskCreationOptions.PreferFairness, TaskScheduler.Default);
tcs.Task.Wait();
}
public void Reset()
{
while (true)
{
var tcs = m_tcs;
if (!tcs.Task.IsCompleted ||
Interlocked.CompareExchange(ref m_tcs, new TaskCompletionSource<bool>(), tcs) == tcs)
return;
}
}
}
With Reactive Extensions (Rx.Net)
var eventObservable = Observable
.FromEventPattern<EventArgs>(
h => example.YourEvent += h,
h => example.YourEvent -= h);
var res = await eventObservable.FirstAsync();
You can add Rx with Nuget Package System.Reactive
Tested Sample:
private static event EventHandler<EventArgs> _testEvent;
private static async Task Main()
{
var eventObservable = Observable
.FromEventPattern<EventArgs>(
h => _testEvent += h,
h => _testEvent -= h);
Task.Delay(5000).ContinueWith(_ => _testEvent?.Invoke(null, new EventArgs()));
var res = await eventObservable.FirstAsync();
Console.WriteLine("Event got fired");
}
I'm using my own AsyncEvent class for awaitable events.
public delegate Task AsyncEventHandler<T>(object sender, T args) where T : EventArgs;
public class AsyncEvent : AsyncEvent<EventArgs>
{
public AsyncEvent() : base()
{
}
}
public class AsyncEvent<T> where T : EventArgs
{
private readonly HashSet<AsyncEventHandler<T>> _handlers;
public AsyncEvent()
{
_handlers = new HashSet<AsyncEventHandler<T>>();
}
public void Add(AsyncEventHandler<T> handler)
{
_handlers.Add(handler);
}
public void Remove(AsyncEventHandler<T> handler)
{
_handlers.Remove(handler);
}
public async Task InvokeAsync(object sender, T args)
{
foreach (var handler in _handlers)
{
await handler(sender, args);
}
}
public static AsyncEvent<T> operator+(AsyncEvent<T> left, AsyncEventHandler<T> right)
{
var result = left ?? new AsyncEvent<T>();
result.Add(right);
return result;
}
public static AsyncEvent<T> operator-(AsyncEvent<T> left, AsyncEventHandler<T> right)
{
left.Remove(right);
return left;
}
}
To declare an event in the class that raises events:
public AsyncEvent MyNormalEvent;
public AsyncEvent<ProgressEventArgs> MyCustomEvent;
To raise the events:
if (MyNormalEvent != null) await MyNormalEvent.InvokeAsync(this, new EventArgs());
if (MyCustomEvent != null) await MyCustomEvent.InvokeAsync(this, new ProgressEventArgs());
To subscribe to the events:
MyControl.Click += async (sender, args) => {
// await...
}
MyControl.Click += (sender, args) => {
// synchronous code
return Task.CompletedTask;
}
Here is a small toolbox of six methods, that can be used for converting events to tasks:
/// <summary>Converts a .NET event, conforming to the standard .NET event pattern
/// based on <see cref="EventHandler"/>, to a Task.</summary>
public static Task EventToAsync(
Action<EventHandler> addHandler,
Action<EventHandler> removeHandler)
{
var tcs = new TaskCompletionSource<object>();
addHandler(Handler);
return tcs.Task;
void Handler(object sender, EventArgs e)
{
removeHandler(Handler);
tcs.SetResult(null);
}
}
/// <summary>Converts a .NET event, conforming to the standard .NET event pattern
/// based on <see cref="EventHandler{TEventArgs}"/>, to a Task.</summary>
public static Task<TEventArgs> EventToAsync<TEventArgs>(
Action<EventHandler<TEventArgs>> addHandler,
Action<EventHandler<TEventArgs>> removeHandler)
{
var tcs = new TaskCompletionSource<TEventArgs>();
addHandler(Handler);
return tcs.Task;
void Handler(object sender, TEventArgs e)
{
removeHandler(Handler);
tcs.SetResult(e);
}
}
/// <summary>Converts a .NET event, conforming to the standard .NET event pattern
/// based on a supplied event delegate type, to a Task.</summary>
public static Task<TEventArgs> EventToAsync<TDelegate, TEventArgs>(
Action<TDelegate> addHandler, Action<TDelegate> removeHandler)
{
var tcs = new TaskCompletionSource<TEventArgs>();
TDelegate handler = default;
Action<object, TEventArgs> genericHandler = (sender, e) =>
{
removeHandler(handler);
tcs.SetResult(e);
};
handler = (TDelegate)(object)genericHandler.GetType().GetMethod("Invoke")
.CreateDelegate(typeof(TDelegate), genericHandler);
addHandler(handler);
return tcs.Task;
}
/// <summary>Converts a named .NET event, conforming to the standard .NET event
/// pattern based on <see cref="EventHandler"/>, to a Task.</summary>
public static Task EventToAsync(object target, string eventName)
{
var type = target.GetType();
var eventInfo = type.GetEvent(eventName);
if (eventInfo == null) throw new InvalidOperationException("Event not found.");
var tcs = new TaskCompletionSource<object>();
EventHandler handler = default;
handler = new EventHandler((sender, e) =>
{
eventInfo.RemoveEventHandler(target, handler);
tcs.SetResult(null);
});
eventInfo.AddEventHandler(target, handler);
return tcs.Task;
}
/// <summary>Converts a named .NET event, conforming to the standard .NET event
/// pattern based on <see cref="EventHandler{TEventArgs}"/>, to a Task.</summary>
public static Task<TEventArgs> EventToAsync<TEventArgs>(
object target, string eventName)
{
var type = target.GetType();
var eventInfo = type.GetEvent(eventName);
if (eventInfo == null) throw new InvalidOperationException("Event not found.");
var tcs = new TaskCompletionSource<TEventArgs>();
EventHandler<TEventArgs> handler = default;
handler = new EventHandler<TEventArgs>((sender, e) =>
{
eventInfo.RemoveEventHandler(target, handler);
tcs.SetResult(e);
});
eventInfo.AddEventHandler(target, handler);
return tcs.Task;
}
/// <summary>Converts a generic Action-based .NET event to a Task.</summary>
public static Task<TArgument> EventActionToAsync<TArgument>(
Action<Action<TArgument>> addHandler,
Action<Action<TArgument>> removeHandler)
{
var tcs = new TaskCompletionSource<TArgument>();
addHandler(Handler);
return tcs.Task;
void Handler(TArgument arg)
{
removeHandler(Handler);
tcs.SetResult(arg);
}
}
All these methods are creating a Task that will complete with the next invocation of the associated event. This task can never become faulted or canceled, it may only complete successfully.
Usage example with a standard event (Progress<T>.ProgressChanged):
var p = new Progress<int>();
//...
int result = await EventToAsync<int>(
h => p.ProgressChanged += h, h => p.ProgressChanged -= h);
// ...or...
int result = await EventToAsync<EventHandler<int>, int>(
h => p.ProgressChanged += h, h => p.ProgressChanged -= h);
// ...or...
int result = await EventToAsync<int>(p, "ProgressChanged");
Usage example with a non-standard event:
public static event Action<int> MyEvent;
//...
int result = await EventActionToAsync<int>(h => MyEvent += h, h => MyEvent -= h);
The event is unsubscribed when the task is completed. No mechanism is provided for unsubscribing earlier than that.
Here is a class I used for testing, which support CancellationToken.
This Test method shows us awaiting an instance of ClassWithEvent's MyEvent to be raised. :
public async Task TestEventAwaiter()
{
var cls = new ClassWithEvent();
Task<bool> isRaisedTask = EventAwaiter<ClassWithEvent>.RunAsync(
cls,
nameof(ClassWithEvent.MyMethodEvent),
TimeSpan.FromSeconds(3));
cls.Raise();
Assert.IsTrue(await isRaisedTask);
isRaisedTask = EventAwaiter<ClassWithEvent>.RunAsync(
cls,
nameof(ClassWithEvent.MyMethodEvent),
TimeSpan.FromSeconds(1));
System.Threading.Thread.Sleep(2000);
Assert.IsFalse(await isRaisedTask);
}
Here's the event awaiter class.
public class EventAwaiter<TOwner>
{
private readonly TOwner_owner;
private readonly string _eventName;
private readonly TaskCompletionSource<bool> _taskCompletionSource;
private readonly CancellationTokenSource _elapsedCancellationTokenSource;
private readonly CancellationTokenSource _linkedCancellationTokenSource;
private readonly CancellationToken _activeCancellationToken;
private Delegate _localHookDelegate;
private EventInfo _eventInfo;
public static Task<bool> RunAsync(
TOwner owner,
string eventName,
TimeSpan timeout,
CancellationToken? cancellationToken = null)
{
return (new EventAwaiter<TOwner>(owner, eventName, timeout, cancellationToken)).RunAsync(timeout);
}
private EventAwaiter(
TOwner owner,
string eventName,
TimeSpan timeout,
CancellationToken? cancellationToken = null)
{
if (owner == null) throw new TypeInitializationException(this.GetType().FullName, new ArgumentNullException(nameof(owner)));
if (eventName == null) throw new TypeInitializationException(this.GetType().FullName, new ArgumentNullException(nameof(eventName)));
_owner = owner;
_eventName = eventName;
_taskCompletionSource = new TaskCompletionSource<bool>();
_elapsedCancellationTokenSource = new CancellationTokenSource();
_linkedCancellationTokenSource =
cancellationToken == null
? null
: CancellationTokenSource.CreateLinkedTokenSource(_elapsedCancellationTokenSource.Token, cancellationToken.Value);
_activeCancellationToken = (_linkedCancellationTokenSource ?? _elapsedCancellationTokenSource).Token;
_eventInfo = typeof(TOwner).GetEvent(_eventName);
Type eventHandlerType = _eventInfo.EventHandlerType;
MethodInfo invokeMethodInfo = eventHandlerType.GetMethod("Invoke");
var parameterTypes = Enumerable.Repeat(this.GetType(),1).Concat(invokeMethodInfo.GetParameters().Select(p => p.ParameterType)).ToArray();
DynamicMethod eventRedirectorMethod = new DynamicMethod("EventRedirect", typeof(void), parameterTypes);
ILGenerator generator = eventRedirectorMethod.GetILGenerator();
generator.Emit(OpCodes.Nop);
generator.Emit(OpCodes.Ldarg_0);
generator.EmitCall(OpCodes.Call, this.GetType().GetMethod(nameof(OnEventRaised),BindingFlags.Public | BindingFlags.Instance), null);
generator.Emit(OpCodes.Ret);
_localHookDelegate = eventRedirectorMethod.CreateDelegate(eventHandlerType,this);
}
private void AddHandler()
{
_eventInfo.AddEventHandler(_owner, _localHookDelegate);
}
private void RemoveHandler()
{
_eventInfo.RemoveEventHandler(_owner, _localHookDelegate);
}
private Task<bool> RunAsync(TimeSpan timeout)
{
AddHandler();
Task.Delay(timeout, _activeCancellationToken).
ContinueWith(TimeOutTaskCompleted);
return _taskCompletionSource.Task;
}
private void TimeOutTaskCompleted(Task tsk)
{
RemoveHandler();
if (_elapsedCancellationTokenSource.IsCancellationRequested) return;
if (_linkedCancellationTokenSource?.IsCancellationRequested == true)
SetResult(TaskResult.Cancelled);
else if (!_taskCompletionSource.Task.IsCompleted)
SetResult(TaskResult.Failed);
}
public void OnEventRaised()
{
RemoveHandler();
if (_taskCompletionSource.Task.IsCompleted)
{
if (!_elapsedCancellationTokenSource.IsCancellationRequested)
_elapsedCancellationTokenSource?.Cancel(false);
}
else
{
if (!_elapsedCancellationTokenSource.IsCancellationRequested)
_elapsedCancellationTokenSource?.Cancel(false);
SetResult(TaskResult.Success);
}
}
enum TaskResult { Failed, Success, Cancelled }
private void SetResult(TaskResult result)
{
if (result == TaskResult.Success)
_taskCompletionSource.SetResult(true);
else if (result == TaskResult.Failed)
_taskCompletionSource.SetResult(false);
else if (result == TaskResult.Cancelled)
_taskCompletionSource.SetCanceled();
Dispose();
}
public void Dispose()
{
RemoveHandler();
_elapsedCancellationTokenSource?.Dispose();
_linkedCancellationTokenSource?.Dispose();
}
}
It basically relies on CancellationTokenSource to report back the result.
It uses some IL injection to create a delegate to match the event's signature.
That delegate is then added as a handler for that event using some reflection.
The body of the generate method simply calls another function on the EventAwaiter class, which then reports success using the CancellationTokenSource.
Caution, do not use this, as is, in product. This is meant as a working example.
For instance, IL generation is an expensive process. You should avoid regenerate the same method over and over again, and instead cache these.
AsyncEx has AsyncManualResetEvent for this. You can:
var signal = new AsyncManualResetEvent();
await signal.WaitAsync();
And trigger it with:
signal.Set();
In my C#/XAML metro app, there's a button which kicks off a long-running process. So, as recommended, I'm using async/await to make sure the UI thread doesn't get blocked:
private async void Button_Click_1(object sender, RoutedEventArgs e)
{
await GetResults();
}
private async Task GetResults()
{
// Do lot of complex stuff that takes a long time
// (e.g. contact some web services)
...
}
Occasionally, the stuff happening within GetResults would require additional user input before it can continue. For simplicity, let's say the user just has to click a "continue" button.
My question is: how can I suspend the execution of GetResults in such a way that it awaits an event such as the click of another button?
Here's an ugly way to achieve what I'm looking for: the event handler for the continue" button sets a flag...
private bool _continue = false;
private void buttonContinue_Click(object sender, RoutedEventArgs e)
{
_continue = true;
}
... and GetResults periodically polls it:
buttonContinue.Visibility = Visibility.Visible;
while (!_continue) await Task.Delay(100); // poll _continue every 100ms
buttonContinue.Visibility = Visibility.Collapsed;
The polling is clearly terrible (busy waiting / waste of cycles) and I'm looking for something event-based.
Any ideas?
Btw in this simplified example, one solution would be of course to split up GetResults() into two parts, invoke the first part from the start button and the second part from the continue button. In reality, the stuff happening in GetResults is more complex and different types of user input can be required at different points within the execution. So breaking up the logic into multiple methods would be non-trivial.
You can use an instance of the SemaphoreSlim Class as a signal:
private SemaphoreSlim signal = new SemaphoreSlim(0, 1);
// set signal in event
signal.Release();
// wait for signal somewhere else
await signal.WaitAsync();
Alternatively, you can use an instance of the TaskCompletionSource<T> Class to create a Task<T> that represents the result of the button click:
private TaskCompletionSource<bool> tcs = new TaskCompletionSource<bool>();
// complete task in event
tcs.SetResult(true);
// wait for task somewhere else
await tcs.Task;
When you have an unusual thing you need to await on, the easiest answer is often TaskCompletionSource (or some async-enabled primitive based on TaskCompletionSource).
In this case, your need is quite simple, so you can just use TaskCompletionSource directly:
private TaskCompletionSource<object> continueClicked;
private async void Button_Click_1(object sender, RoutedEventArgs e)
{
// Note: You probably want to disable this button while "in progress" so the
// user can't click it twice.
await GetResults();
// And re-enable the button here, possibly in a finally block.
}
private async Task GetResults()
{
// Do lot of complex stuff that takes a long time
// (e.g. contact some web services)
// Wait for the user to click Continue.
continueClicked = new TaskCompletionSource<object>();
buttonContinue.Visibility = Visibility.Visible;
await continueClicked.Task;
buttonContinue.Visibility = Visibility.Collapsed;
// More work...
}
private void buttonContinue_Click(object sender, RoutedEventArgs e)
{
if (continueClicked != null)
continueClicked.TrySetResult(null);
}
Logically, TaskCompletionSource is like an async ManualResetEvent, except that you can only "set" the event once and the event can have a "result" (in this case, we're not using it, so we just set the result to null).
Here is a utility class that I use:
public class AsyncEventListener
{
private readonly Func<bool> _predicate;
public AsyncEventListener() : this(() => true)
{
}
public AsyncEventListener(Func<bool> predicate)
{
_predicate = predicate;
Successfully = new Task(() => { });
}
public void Listen(object sender, EventArgs eventArgs)
{
if (!Successfully.IsCompleted && _predicate.Invoke())
{
Successfully.RunSynchronously();
}
}
public Task Successfully { get; }
}
And here is how I use it:
var itChanged = new AsyncEventListener();
someObject.PropertyChanged += itChanged.Listen;
// ... make it change ...
await itChanged.Successfully;
someObject.PropertyChanged -= itChanged.Listen;
Ideally, you don't. While you certainly can block the async thread, that's a waste of resources, and not ideal.
Consider the canonical example where the user goes to lunch while the button is waiting to be clicked.
If you have halted your asynchronous code while waiting for the input from the user, then it's just wasting resources while that thread is paused.
That said, it's better if in your asynchronous operation, you set the state that you need to maintain to the point where the button is enabled and you're "waiting" on a click. At that point, your GetResults method stops.
Then, when the button is clicked, based on the state that you have stored, you start another asynchronous task to continue the work.
Because the SynchronizationContext will be captured in the event handler that calls GetResults (the compiler will do this as a result of using the await keyword being used, and the fact that SynchronizationContext.Current should be non-null, given you are in a UI application), you can use async/await like so:
private async void Button_Click_1(object sender, RoutedEventArgs e)
{
await GetResults();
// Show dialog/UI element. This code has been marshaled
// back to the UI thread because the SynchronizationContext
// was captured behind the scenes when
// await was called on the previous line.
...
// Check continue, if true, then continue with another async task.
if (_continue) await ContinueToGetResultsAsync();
}
private bool _continue = false;
private void buttonContinue_Click(object sender, RoutedEventArgs e)
{
_continue = true;
}
private async Task GetResults()
{
// Do lot of complex stuff that takes a long time
// (e.g. contact some web services)
...
}
ContinueToGetResultsAsync is the method that continues to get the results in the event that your button is pushed. If your button is not pushed, then your event handler does nothing.
Simple Helper Class:
public class EventAwaiter<TEventArgs>
{
private readonly TaskCompletionSource<TEventArgs> _eventArrived = new TaskCompletionSource<TEventArgs>();
private readonly Action<EventHandler<TEventArgs>> _unsubscribe;
public EventAwaiter(Action<EventHandler<TEventArgs>> subscribe, Action<EventHandler<TEventArgs>> unsubscribe)
{
subscribe(Subscription);
_unsubscribe = unsubscribe;
}
public Task<TEventArgs> Task => _eventArrived.Task;
private EventHandler<TEventArgs> Subscription => (s, e) =>
{
_eventArrived.TrySetResult(e);
_unsubscribe(Subscription);
};
}
Usage:
var valueChangedEventAwaiter = new EventAwaiter<YourEventArgs>(
h => example.YourEvent += h,
h => example.YourEvent -= h);
await valueChangedEventAwaiter.Task;
Stephen Toub published this AsyncManualResetEvent class on his blog.
public class AsyncManualResetEvent
{
private volatile TaskCompletionSource<bool> m_tcs = new TaskCompletionSource<bool>();
public Task WaitAsync() { return m_tcs.Task; }
public void Set()
{
var tcs = m_tcs;
Task.Factory.StartNew(s => ((TaskCompletionSource<bool>)s).TrySetResult(true),
tcs, CancellationToken.None, TaskCreationOptions.PreferFairness, TaskScheduler.Default);
tcs.Task.Wait();
}
public void Reset()
{
while (true)
{
var tcs = m_tcs;
if (!tcs.Task.IsCompleted ||
Interlocked.CompareExchange(ref m_tcs, new TaskCompletionSource<bool>(), tcs) == tcs)
return;
}
}
}
With Reactive Extensions (Rx.Net)
var eventObservable = Observable
.FromEventPattern<EventArgs>(
h => example.YourEvent += h,
h => example.YourEvent -= h);
var res = await eventObservable.FirstAsync();
You can add Rx with Nuget Package System.Reactive
Tested Sample:
private static event EventHandler<EventArgs> _testEvent;
private static async Task Main()
{
var eventObservable = Observable
.FromEventPattern<EventArgs>(
h => _testEvent += h,
h => _testEvent -= h);
Task.Delay(5000).ContinueWith(_ => _testEvent?.Invoke(null, new EventArgs()));
var res = await eventObservable.FirstAsync();
Console.WriteLine("Event got fired");
}
I'm using my own AsyncEvent class for awaitable events.
public delegate Task AsyncEventHandler<T>(object sender, T args) where T : EventArgs;
public class AsyncEvent : AsyncEvent<EventArgs>
{
public AsyncEvent() : base()
{
}
}
public class AsyncEvent<T> where T : EventArgs
{
private readonly HashSet<AsyncEventHandler<T>> _handlers;
public AsyncEvent()
{
_handlers = new HashSet<AsyncEventHandler<T>>();
}
public void Add(AsyncEventHandler<T> handler)
{
_handlers.Add(handler);
}
public void Remove(AsyncEventHandler<T> handler)
{
_handlers.Remove(handler);
}
public async Task InvokeAsync(object sender, T args)
{
foreach (var handler in _handlers)
{
await handler(sender, args);
}
}
public static AsyncEvent<T> operator+(AsyncEvent<T> left, AsyncEventHandler<T> right)
{
var result = left ?? new AsyncEvent<T>();
result.Add(right);
return result;
}
public static AsyncEvent<T> operator-(AsyncEvent<T> left, AsyncEventHandler<T> right)
{
left.Remove(right);
return left;
}
}
To declare an event in the class that raises events:
public AsyncEvent MyNormalEvent;
public AsyncEvent<ProgressEventArgs> MyCustomEvent;
To raise the events:
if (MyNormalEvent != null) await MyNormalEvent.InvokeAsync(this, new EventArgs());
if (MyCustomEvent != null) await MyCustomEvent.InvokeAsync(this, new ProgressEventArgs());
To subscribe to the events:
MyControl.Click += async (sender, args) => {
// await...
}
MyControl.Click += (sender, args) => {
// synchronous code
return Task.CompletedTask;
}
Here is a small toolbox of six methods, that can be used for converting events to tasks:
/// <summary>Converts a .NET event, conforming to the standard .NET event pattern
/// based on <see cref="EventHandler"/>, to a Task.</summary>
public static Task EventToAsync(
Action<EventHandler> addHandler,
Action<EventHandler> removeHandler)
{
var tcs = new TaskCompletionSource<object>();
addHandler(Handler);
return tcs.Task;
void Handler(object sender, EventArgs e)
{
removeHandler(Handler);
tcs.SetResult(null);
}
}
/// <summary>Converts a .NET event, conforming to the standard .NET event pattern
/// based on <see cref="EventHandler{TEventArgs}"/>, to a Task.</summary>
public static Task<TEventArgs> EventToAsync<TEventArgs>(
Action<EventHandler<TEventArgs>> addHandler,
Action<EventHandler<TEventArgs>> removeHandler)
{
var tcs = new TaskCompletionSource<TEventArgs>();
addHandler(Handler);
return tcs.Task;
void Handler(object sender, TEventArgs e)
{
removeHandler(Handler);
tcs.SetResult(e);
}
}
/// <summary>Converts a .NET event, conforming to the standard .NET event pattern
/// based on a supplied event delegate type, to a Task.</summary>
public static Task<TEventArgs> EventToAsync<TDelegate, TEventArgs>(
Action<TDelegate> addHandler, Action<TDelegate> removeHandler)
{
var tcs = new TaskCompletionSource<TEventArgs>();
TDelegate handler = default;
Action<object, TEventArgs> genericHandler = (sender, e) =>
{
removeHandler(handler);
tcs.SetResult(e);
};
handler = (TDelegate)(object)genericHandler.GetType().GetMethod("Invoke")
.CreateDelegate(typeof(TDelegate), genericHandler);
addHandler(handler);
return tcs.Task;
}
/// <summary>Converts a named .NET event, conforming to the standard .NET event
/// pattern based on <see cref="EventHandler"/>, to a Task.</summary>
public static Task EventToAsync(object target, string eventName)
{
var type = target.GetType();
var eventInfo = type.GetEvent(eventName);
if (eventInfo == null) throw new InvalidOperationException("Event not found.");
var tcs = new TaskCompletionSource<object>();
EventHandler handler = default;
handler = new EventHandler((sender, e) =>
{
eventInfo.RemoveEventHandler(target, handler);
tcs.SetResult(null);
});
eventInfo.AddEventHandler(target, handler);
return tcs.Task;
}
/// <summary>Converts a named .NET event, conforming to the standard .NET event
/// pattern based on <see cref="EventHandler{TEventArgs}"/>, to a Task.</summary>
public static Task<TEventArgs> EventToAsync<TEventArgs>(
object target, string eventName)
{
var type = target.GetType();
var eventInfo = type.GetEvent(eventName);
if (eventInfo == null) throw new InvalidOperationException("Event not found.");
var tcs = new TaskCompletionSource<TEventArgs>();
EventHandler<TEventArgs> handler = default;
handler = new EventHandler<TEventArgs>((sender, e) =>
{
eventInfo.RemoveEventHandler(target, handler);
tcs.SetResult(e);
});
eventInfo.AddEventHandler(target, handler);
return tcs.Task;
}
/// <summary>Converts a generic Action-based .NET event to a Task.</summary>
public static Task<TArgument> EventActionToAsync<TArgument>(
Action<Action<TArgument>> addHandler,
Action<Action<TArgument>> removeHandler)
{
var tcs = new TaskCompletionSource<TArgument>();
addHandler(Handler);
return tcs.Task;
void Handler(TArgument arg)
{
removeHandler(Handler);
tcs.SetResult(arg);
}
}
All these methods are creating a Task that will complete with the next invocation of the associated event. This task can never become faulted or canceled, it may only complete successfully.
Usage example with a standard event (Progress<T>.ProgressChanged):
var p = new Progress<int>();
//...
int result = await EventToAsync<int>(
h => p.ProgressChanged += h, h => p.ProgressChanged -= h);
// ...or...
int result = await EventToAsync<EventHandler<int>, int>(
h => p.ProgressChanged += h, h => p.ProgressChanged -= h);
// ...or...
int result = await EventToAsync<int>(p, "ProgressChanged");
Usage example with a non-standard event:
public static event Action<int> MyEvent;
//...
int result = await EventActionToAsync<int>(h => MyEvent += h, h => MyEvent -= h);
The event is unsubscribed when the task is completed. No mechanism is provided for unsubscribing earlier than that.
Here is a class I used for testing, which support CancellationToken.
This Test method shows us awaiting an instance of ClassWithEvent's MyEvent to be raised. :
public async Task TestEventAwaiter()
{
var cls = new ClassWithEvent();
Task<bool> isRaisedTask = EventAwaiter<ClassWithEvent>.RunAsync(
cls,
nameof(ClassWithEvent.MyMethodEvent),
TimeSpan.FromSeconds(3));
cls.Raise();
Assert.IsTrue(await isRaisedTask);
isRaisedTask = EventAwaiter<ClassWithEvent>.RunAsync(
cls,
nameof(ClassWithEvent.MyMethodEvent),
TimeSpan.FromSeconds(1));
System.Threading.Thread.Sleep(2000);
Assert.IsFalse(await isRaisedTask);
}
Here's the event awaiter class.
public class EventAwaiter<TOwner>
{
private readonly TOwner_owner;
private readonly string _eventName;
private readonly TaskCompletionSource<bool> _taskCompletionSource;
private readonly CancellationTokenSource _elapsedCancellationTokenSource;
private readonly CancellationTokenSource _linkedCancellationTokenSource;
private readonly CancellationToken _activeCancellationToken;
private Delegate _localHookDelegate;
private EventInfo _eventInfo;
public static Task<bool> RunAsync(
TOwner owner,
string eventName,
TimeSpan timeout,
CancellationToken? cancellationToken = null)
{
return (new EventAwaiter<TOwner>(owner, eventName, timeout, cancellationToken)).RunAsync(timeout);
}
private EventAwaiter(
TOwner owner,
string eventName,
TimeSpan timeout,
CancellationToken? cancellationToken = null)
{
if (owner == null) throw new TypeInitializationException(this.GetType().FullName, new ArgumentNullException(nameof(owner)));
if (eventName == null) throw new TypeInitializationException(this.GetType().FullName, new ArgumentNullException(nameof(eventName)));
_owner = owner;
_eventName = eventName;
_taskCompletionSource = new TaskCompletionSource<bool>();
_elapsedCancellationTokenSource = new CancellationTokenSource();
_linkedCancellationTokenSource =
cancellationToken == null
? null
: CancellationTokenSource.CreateLinkedTokenSource(_elapsedCancellationTokenSource.Token, cancellationToken.Value);
_activeCancellationToken = (_linkedCancellationTokenSource ?? _elapsedCancellationTokenSource).Token;
_eventInfo = typeof(TOwner).GetEvent(_eventName);
Type eventHandlerType = _eventInfo.EventHandlerType;
MethodInfo invokeMethodInfo = eventHandlerType.GetMethod("Invoke");
var parameterTypes = Enumerable.Repeat(this.GetType(),1).Concat(invokeMethodInfo.GetParameters().Select(p => p.ParameterType)).ToArray();
DynamicMethod eventRedirectorMethod = new DynamicMethod("EventRedirect", typeof(void), parameterTypes);
ILGenerator generator = eventRedirectorMethod.GetILGenerator();
generator.Emit(OpCodes.Nop);
generator.Emit(OpCodes.Ldarg_0);
generator.EmitCall(OpCodes.Call, this.GetType().GetMethod(nameof(OnEventRaised),BindingFlags.Public | BindingFlags.Instance), null);
generator.Emit(OpCodes.Ret);
_localHookDelegate = eventRedirectorMethod.CreateDelegate(eventHandlerType,this);
}
private void AddHandler()
{
_eventInfo.AddEventHandler(_owner, _localHookDelegate);
}
private void RemoveHandler()
{
_eventInfo.RemoveEventHandler(_owner, _localHookDelegate);
}
private Task<bool> RunAsync(TimeSpan timeout)
{
AddHandler();
Task.Delay(timeout, _activeCancellationToken).
ContinueWith(TimeOutTaskCompleted);
return _taskCompletionSource.Task;
}
private void TimeOutTaskCompleted(Task tsk)
{
RemoveHandler();
if (_elapsedCancellationTokenSource.IsCancellationRequested) return;
if (_linkedCancellationTokenSource?.IsCancellationRequested == true)
SetResult(TaskResult.Cancelled);
else if (!_taskCompletionSource.Task.IsCompleted)
SetResult(TaskResult.Failed);
}
public void OnEventRaised()
{
RemoveHandler();
if (_taskCompletionSource.Task.IsCompleted)
{
if (!_elapsedCancellationTokenSource.IsCancellationRequested)
_elapsedCancellationTokenSource?.Cancel(false);
}
else
{
if (!_elapsedCancellationTokenSource.IsCancellationRequested)
_elapsedCancellationTokenSource?.Cancel(false);
SetResult(TaskResult.Success);
}
}
enum TaskResult { Failed, Success, Cancelled }
private void SetResult(TaskResult result)
{
if (result == TaskResult.Success)
_taskCompletionSource.SetResult(true);
else if (result == TaskResult.Failed)
_taskCompletionSource.SetResult(false);
else if (result == TaskResult.Cancelled)
_taskCompletionSource.SetCanceled();
Dispose();
}
public void Dispose()
{
RemoveHandler();
_elapsedCancellationTokenSource?.Dispose();
_linkedCancellationTokenSource?.Dispose();
}
}
It basically relies on CancellationTokenSource to report back the result.
It uses some IL injection to create a delegate to match the event's signature.
That delegate is then added as a handler for that event using some reflection.
The body of the generate method simply calls another function on the EventAwaiter class, which then reports success using the CancellationTokenSource.
Caution, do not use this, as is, in product. This is meant as a working example.
For instance, IL generation is an expensive process. You should avoid regenerate the same method over and over again, and instead cache these.
AsyncEx has AsyncManualResetEvent for this. You can:
var signal = new AsyncManualResetEvent();
await signal.WaitAsync();
And trigger it with:
signal.Set();
In my C#/XAML metro app, there's a button which kicks off a long-running process. So, as recommended, I'm using async/await to make sure the UI thread doesn't get blocked:
private async void Button_Click_1(object sender, RoutedEventArgs e)
{
await GetResults();
}
private async Task GetResults()
{
// Do lot of complex stuff that takes a long time
// (e.g. contact some web services)
...
}
Occasionally, the stuff happening within GetResults would require additional user input before it can continue. For simplicity, let's say the user just has to click a "continue" button.
My question is: how can I suspend the execution of GetResults in such a way that it awaits an event such as the click of another button?
Here's an ugly way to achieve what I'm looking for: the event handler for the continue" button sets a flag...
private bool _continue = false;
private void buttonContinue_Click(object sender, RoutedEventArgs e)
{
_continue = true;
}
... and GetResults periodically polls it:
buttonContinue.Visibility = Visibility.Visible;
while (!_continue) await Task.Delay(100); // poll _continue every 100ms
buttonContinue.Visibility = Visibility.Collapsed;
The polling is clearly terrible (busy waiting / waste of cycles) and I'm looking for something event-based.
Any ideas?
Btw in this simplified example, one solution would be of course to split up GetResults() into two parts, invoke the first part from the start button and the second part from the continue button. In reality, the stuff happening in GetResults is more complex and different types of user input can be required at different points within the execution. So breaking up the logic into multiple methods would be non-trivial.
You can use an instance of the SemaphoreSlim Class as a signal:
private SemaphoreSlim signal = new SemaphoreSlim(0, 1);
// set signal in event
signal.Release();
// wait for signal somewhere else
await signal.WaitAsync();
Alternatively, you can use an instance of the TaskCompletionSource<T> Class to create a Task<T> that represents the result of the button click:
private TaskCompletionSource<bool> tcs = new TaskCompletionSource<bool>();
// complete task in event
tcs.SetResult(true);
// wait for task somewhere else
await tcs.Task;
When you have an unusual thing you need to await on, the easiest answer is often TaskCompletionSource (or some async-enabled primitive based on TaskCompletionSource).
In this case, your need is quite simple, so you can just use TaskCompletionSource directly:
private TaskCompletionSource<object> continueClicked;
private async void Button_Click_1(object sender, RoutedEventArgs e)
{
// Note: You probably want to disable this button while "in progress" so the
// user can't click it twice.
await GetResults();
// And re-enable the button here, possibly in a finally block.
}
private async Task GetResults()
{
// Do lot of complex stuff that takes a long time
// (e.g. contact some web services)
// Wait for the user to click Continue.
continueClicked = new TaskCompletionSource<object>();
buttonContinue.Visibility = Visibility.Visible;
await continueClicked.Task;
buttonContinue.Visibility = Visibility.Collapsed;
// More work...
}
private void buttonContinue_Click(object sender, RoutedEventArgs e)
{
if (continueClicked != null)
continueClicked.TrySetResult(null);
}
Logically, TaskCompletionSource is like an async ManualResetEvent, except that you can only "set" the event once and the event can have a "result" (in this case, we're not using it, so we just set the result to null).
Here is a utility class that I use:
public class AsyncEventListener
{
private readonly Func<bool> _predicate;
public AsyncEventListener() : this(() => true)
{
}
public AsyncEventListener(Func<bool> predicate)
{
_predicate = predicate;
Successfully = new Task(() => { });
}
public void Listen(object sender, EventArgs eventArgs)
{
if (!Successfully.IsCompleted && _predicate.Invoke())
{
Successfully.RunSynchronously();
}
}
public Task Successfully { get; }
}
And here is how I use it:
var itChanged = new AsyncEventListener();
someObject.PropertyChanged += itChanged.Listen;
// ... make it change ...
await itChanged.Successfully;
someObject.PropertyChanged -= itChanged.Listen;
Ideally, you don't. While you certainly can block the async thread, that's a waste of resources, and not ideal.
Consider the canonical example where the user goes to lunch while the button is waiting to be clicked.
If you have halted your asynchronous code while waiting for the input from the user, then it's just wasting resources while that thread is paused.
That said, it's better if in your asynchronous operation, you set the state that you need to maintain to the point where the button is enabled and you're "waiting" on a click. At that point, your GetResults method stops.
Then, when the button is clicked, based on the state that you have stored, you start another asynchronous task to continue the work.
Because the SynchronizationContext will be captured in the event handler that calls GetResults (the compiler will do this as a result of using the await keyword being used, and the fact that SynchronizationContext.Current should be non-null, given you are in a UI application), you can use async/await like so:
private async void Button_Click_1(object sender, RoutedEventArgs e)
{
await GetResults();
// Show dialog/UI element. This code has been marshaled
// back to the UI thread because the SynchronizationContext
// was captured behind the scenes when
// await was called on the previous line.
...
// Check continue, if true, then continue with another async task.
if (_continue) await ContinueToGetResultsAsync();
}
private bool _continue = false;
private void buttonContinue_Click(object sender, RoutedEventArgs e)
{
_continue = true;
}
private async Task GetResults()
{
// Do lot of complex stuff that takes a long time
// (e.g. contact some web services)
...
}
ContinueToGetResultsAsync is the method that continues to get the results in the event that your button is pushed. If your button is not pushed, then your event handler does nothing.
Simple Helper Class:
public class EventAwaiter<TEventArgs>
{
private readonly TaskCompletionSource<TEventArgs> _eventArrived = new TaskCompletionSource<TEventArgs>();
private readonly Action<EventHandler<TEventArgs>> _unsubscribe;
public EventAwaiter(Action<EventHandler<TEventArgs>> subscribe, Action<EventHandler<TEventArgs>> unsubscribe)
{
subscribe(Subscription);
_unsubscribe = unsubscribe;
}
public Task<TEventArgs> Task => _eventArrived.Task;
private EventHandler<TEventArgs> Subscription => (s, e) =>
{
_eventArrived.TrySetResult(e);
_unsubscribe(Subscription);
};
}
Usage:
var valueChangedEventAwaiter = new EventAwaiter<YourEventArgs>(
h => example.YourEvent += h,
h => example.YourEvent -= h);
await valueChangedEventAwaiter.Task;
Stephen Toub published this AsyncManualResetEvent class on his blog.
public class AsyncManualResetEvent
{
private volatile TaskCompletionSource<bool> m_tcs = new TaskCompletionSource<bool>();
public Task WaitAsync() { return m_tcs.Task; }
public void Set()
{
var tcs = m_tcs;
Task.Factory.StartNew(s => ((TaskCompletionSource<bool>)s).TrySetResult(true),
tcs, CancellationToken.None, TaskCreationOptions.PreferFairness, TaskScheduler.Default);
tcs.Task.Wait();
}
public void Reset()
{
while (true)
{
var tcs = m_tcs;
if (!tcs.Task.IsCompleted ||
Interlocked.CompareExchange(ref m_tcs, new TaskCompletionSource<bool>(), tcs) == tcs)
return;
}
}
}
With Reactive Extensions (Rx.Net)
var eventObservable = Observable
.FromEventPattern<EventArgs>(
h => example.YourEvent += h,
h => example.YourEvent -= h);
var res = await eventObservable.FirstAsync();
You can add Rx with Nuget Package System.Reactive
Tested Sample:
private static event EventHandler<EventArgs> _testEvent;
private static async Task Main()
{
var eventObservable = Observable
.FromEventPattern<EventArgs>(
h => _testEvent += h,
h => _testEvent -= h);
Task.Delay(5000).ContinueWith(_ => _testEvent?.Invoke(null, new EventArgs()));
var res = await eventObservable.FirstAsync();
Console.WriteLine("Event got fired");
}
I'm using my own AsyncEvent class for awaitable events.
public delegate Task AsyncEventHandler<T>(object sender, T args) where T : EventArgs;
public class AsyncEvent : AsyncEvent<EventArgs>
{
public AsyncEvent() : base()
{
}
}
public class AsyncEvent<T> where T : EventArgs
{
private readonly HashSet<AsyncEventHandler<T>> _handlers;
public AsyncEvent()
{
_handlers = new HashSet<AsyncEventHandler<T>>();
}
public void Add(AsyncEventHandler<T> handler)
{
_handlers.Add(handler);
}
public void Remove(AsyncEventHandler<T> handler)
{
_handlers.Remove(handler);
}
public async Task InvokeAsync(object sender, T args)
{
foreach (var handler in _handlers)
{
await handler(sender, args);
}
}
public static AsyncEvent<T> operator+(AsyncEvent<T> left, AsyncEventHandler<T> right)
{
var result = left ?? new AsyncEvent<T>();
result.Add(right);
return result;
}
public static AsyncEvent<T> operator-(AsyncEvent<T> left, AsyncEventHandler<T> right)
{
left.Remove(right);
return left;
}
}
To declare an event in the class that raises events:
public AsyncEvent MyNormalEvent;
public AsyncEvent<ProgressEventArgs> MyCustomEvent;
To raise the events:
if (MyNormalEvent != null) await MyNormalEvent.InvokeAsync(this, new EventArgs());
if (MyCustomEvent != null) await MyCustomEvent.InvokeAsync(this, new ProgressEventArgs());
To subscribe to the events:
MyControl.Click += async (sender, args) => {
// await...
}
MyControl.Click += (sender, args) => {
// synchronous code
return Task.CompletedTask;
}
Here is a small toolbox of six methods, that can be used for converting events to tasks:
/// <summary>Converts a .NET event, conforming to the standard .NET event pattern
/// based on <see cref="EventHandler"/>, to a Task.</summary>
public static Task EventToAsync(
Action<EventHandler> addHandler,
Action<EventHandler> removeHandler)
{
var tcs = new TaskCompletionSource<object>();
addHandler(Handler);
return tcs.Task;
void Handler(object sender, EventArgs e)
{
removeHandler(Handler);
tcs.SetResult(null);
}
}
/// <summary>Converts a .NET event, conforming to the standard .NET event pattern
/// based on <see cref="EventHandler{TEventArgs}"/>, to a Task.</summary>
public static Task<TEventArgs> EventToAsync<TEventArgs>(
Action<EventHandler<TEventArgs>> addHandler,
Action<EventHandler<TEventArgs>> removeHandler)
{
var tcs = new TaskCompletionSource<TEventArgs>();
addHandler(Handler);
return tcs.Task;
void Handler(object sender, TEventArgs e)
{
removeHandler(Handler);
tcs.SetResult(e);
}
}
/// <summary>Converts a .NET event, conforming to the standard .NET event pattern
/// based on a supplied event delegate type, to a Task.</summary>
public static Task<TEventArgs> EventToAsync<TDelegate, TEventArgs>(
Action<TDelegate> addHandler, Action<TDelegate> removeHandler)
{
var tcs = new TaskCompletionSource<TEventArgs>();
TDelegate handler = default;
Action<object, TEventArgs> genericHandler = (sender, e) =>
{
removeHandler(handler);
tcs.SetResult(e);
};
handler = (TDelegate)(object)genericHandler.GetType().GetMethod("Invoke")
.CreateDelegate(typeof(TDelegate), genericHandler);
addHandler(handler);
return tcs.Task;
}
/// <summary>Converts a named .NET event, conforming to the standard .NET event
/// pattern based on <see cref="EventHandler"/>, to a Task.</summary>
public static Task EventToAsync(object target, string eventName)
{
var type = target.GetType();
var eventInfo = type.GetEvent(eventName);
if (eventInfo == null) throw new InvalidOperationException("Event not found.");
var tcs = new TaskCompletionSource<object>();
EventHandler handler = default;
handler = new EventHandler((sender, e) =>
{
eventInfo.RemoveEventHandler(target, handler);
tcs.SetResult(null);
});
eventInfo.AddEventHandler(target, handler);
return tcs.Task;
}
/// <summary>Converts a named .NET event, conforming to the standard .NET event
/// pattern based on <see cref="EventHandler{TEventArgs}"/>, to a Task.</summary>
public static Task<TEventArgs> EventToAsync<TEventArgs>(
object target, string eventName)
{
var type = target.GetType();
var eventInfo = type.GetEvent(eventName);
if (eventInfo == null) throw new InvalidOperationException("Event not found.");
var tcs = new TaskCompletionSource<TEventArgs>();
EventHandler<TEventArgs> handler = default;
handler = new EventHandler<TEventArgs>((sender, e) =>
{
eventInfo.RemoveEventHandler(target, handler);
tcs.SetResult(e);
});
eventInfo.AddEventHandler(target, handler);
return tcs.Task;
}
/// <summary>Converts a generic Action-based .NET event to a Task.</summary>
public static Task<TArgument> EventActionToAsync<TArgument>(
Action<Action<TArgument>> addHandler,
Action<Action<TArgument>> removeHandler)
{
var tcs = new TaskCompletionSource<TArgument>();
addHandler(Handler);
return tcs.Task;
void Handler(TArgument arg)
{
removeHandler(Handler);
tcs.SetResult(arg);
}
}
All these methods are creating a Task that will complete with the next invocation of the associated event. This task can never become faulted or canceled, it may only complete successfully.
Usage example with a standard event (Progress<T>.ProgressChanged):
var p = new Progress<int>();
//...
int result = await EventToAsync<int>(
h => p.ProgressChanged += h, h => p.ProgressChanged -= h);
// ...or...
int result = await EventToAsync<EventHandler<int>, int>(
h => p.ProgressChanged += h, h => p.ProgressChanged -= h);
// ...or...
int result = await EventToAsync<int>(p, "ProgressChanged");
Usage example with a non-standard event:
public static event Action<int> MyEvent;
//...
int result = await EventActionToAsync<int>(h => MyEvent += h, h => MyEvent -= h);
The event is unsubscribed when the task is completed. No mechanism is provided for unsubscribing earlier than that.
Here is a class I used for testing, which support CancellationToken.
This Test method shows us awaiting an instance of ClassWithEvent's MyEvent to be raised. :
public async Task TestEventAwaiter()
{
var cls = new ClassWithEvent();
Task<bool> isRaisedTask = EventAwaiter<ClassWithEvent>.RunAsync(
cls,
nameof(ClassWithEvent.MyMethodEvent),
TimeSpan.FromSeconds(3));
cls.Raise();
Assert.IsTrue(await isRaisedTask);
isRaisedTask = EventAwaiter<ClassWithEvent>.RunAsync(
cls,
nameof(ClassWithEvent.MyMethodEvent),
TimeSpan.FromSeconds(1));
System.Threading.Thread.Sleep(2000);
Assert.IsFalse(await isRaisedTask);
}
Here's the event awaiter class.
public class EventAwaiter<TOwner>
{
private readonly TOwner_owner;
private readonly string _eventName;
private readonly TaskCompletionSource<bool> _taskCompletionSource;
private readonly CancellationTokenSource _elapsedCancellationTokenSource;
private readonly CancellationTokenSource _linkedCancellationTokenSource;
private readonly CancellationToken _activeCancellationToken;
private Delegate _localHookDelegate;
private EventInfo _eventInfo;
public static Task<bool> RunAsync(
TOwner owner,
string eventName,
TimeSpan timeout,
CancellationToken? cancellationToken = null)
{
return (new EventAwaiter<TOwner>(owner, eventName, timeout, cancellationToken)).RunAsync(timeout);
}
private EventAwaiter(
TOwner owner,
string eventName,
TimeSpan timeout,
CancellationToken? cancellationToken = null)
{
if (owner == null) throw new TypeInitializationException(this.GetType().FullName, new ArgumentNullException(nameof(owner)));
if (eventName == null) throw new TypeInitializationException(this.GetType().FullName, new ArgumentNullException(nameof(eventName)));
_owner = owner;
_eventName = eventName;
_taskCompletionSource = new TaskCompletionSource<bool>();
_elapsedCancellationTokenSource = new CancellationTokenSource();
_linkedCancellationTokenSource =
cancellationToken == null
? null
: CancellationTokenSource.CreateLinkedTokenSource(_elapsedCancellationTokenSource.Token, cancellationToken.Value);
_activeCancellationToken = (_linkedCancellationTokenSource ?? _elapsedCancellationTokenSource).Token;
_eventInfo = typeof(TOwner).GetEvent(_eventName);
Type eventHandlerType = _eventInfo.EventHandlerType;
MethodInfo invokeMethodInfo = eventHandlerType.GetMethod("Invoke");
var parameterTypes = Enumerable.Repeat(this.GetType(),1).Concat(invokeMethodInfo.GetParameters().Select(p => p.ParameterType)).ToArray();
DynamicMethod eventRedirectorMethod = new DynamicMethod("EventRedirect", typeof(void), parameterTypes);
ILGenerator generator = eventRedirectorMethod.GetILGenerator();
generator.Emit(OpCodes.Nop);
generator.Emit(OpCodes.Ldarg_0);
generator.EmitCall(OpCodes.Call, this.GetType().GetMethod(nameof(OnEventRaised),BindingFlags.Public | BindingFlags.Instance), null);
generator.Emit(OpCodes.Ret);
_localHookDelegate = eventRedirectorMethod.CreateDelegate(eventHandlerType,this);
}
private void AddHandler()
{
_eventInfo.AddEventHandler(_owner, _localHookDelegate);
}
private void RemoveHandler()
{
_eventInfo.RemoveEventHandler(_owner, _localHookDelegate);
}
private Task<bool> RunAsync(TimeSpan timeout)
{
AddHandler();
Task.Delay(timeout, _activeCancellationToken).
ContinueWith(TimeOutTaskCompleted);
return _taskCompletionSource.Task;
}
private void TimeOutTaskCompleted(Task tsk)
{
RemoveHandler();
if (_elapsedCancellationTokenSource.IsCancellationRequested) return;
if (_linkedCancellationTokenSource?.IsCancellationRequested == true)
SetResult(TaskResult.Cancelled);
else if (!_taskCompletionSource.Task.IsCompleted)
SetResult(TaskResult.Failed);
}
public void OnEventRaised()
{
RemoveHandler();
if (_taskCompletionSource.Task.IsCompleted)
{
if (!_elapsedCancellationTokenSource.IsCancellationRequested)
_elapsedCancellationTokenSource?.Cancel(false);
}
else
{
if (!_elapsedCancellationTokenSource.IsCancellationRequested)
_elapsedCancellationTokenSource?.Cancel(false);
SetResult(TaskResult.Success);
}
}
enum TaskResult { Failed, Success, Cancelled }
private void SetResult(TaskResult result)
{
if (result == TaskResult.Success)
_taskCompletionSource.SetResult(true);
else if (result == TaskResult.Failed)
_taskCompletionSource.SetResult(false);
else if (result == TaskResult.Cancelled)
_taskCompletionSource.SetCanceled();
Dispose();
}
public void Dispose()
{
RemoveHandler();
_elapsedCancellationTokenSource?.Dispose();
_linkedCancellationTokenSource?.Dispose();
}
}
It basically relies on CancellationTokenSource to report back the result.
It uses some IL injection to create a delegate to match the event's signature.
That delegate is then added as a handler for that event using some reflection.
The body of the generate method simply calls another function on the EventAwaiter class, which then reports success using the CancellationTokenSource.
Caution, do not use this, as is, in product. This is meant as a working example.
For instance, IL generation is an expensive process. You should avoid regenerate the same method over and over again, and instead cache these.
AsyncEx has AsyncManualResetEvent for this. You can:
var signal = new AsyncManualResetEvent();
await signal.WaitAsync();
And trigger it with:
signal.Set();
In my C#/XAML metro app, there's a button which kicks off a long-running process. So, as recommended, I'm using async/await to make sure the UI thread doesn't get blocked:
private async void Button_Click_1(object sender, RoutedEventArgs e)
{
await GetResults();
}
private async Task GetResults()
{
// Do lot of complex stuff that takes a long time
// (e.g. contact some web services)
...
}
Occasionally, the stuff happening within GetResults would require additional user input before it can continue. For simplicity, let's say the user just has to click a "continue" button.
My question is: how can I suspend the execution of GetResults in such a way that it awaits an event such as the click of another button?
Here's an ugly way to achieve what I'm looking for: the event handler for the continue" button sets a flag...
private bool _continue = false;
private void buttonContinue_Click(object sender, RoutedEventArgs e)
{
_continue = true;
}
... and GetResults periodically polls it:
buttonContinue.Visibility = Visibility.Visible;
while (!_continue) await Task.Delay(100); // poll _continue every 100ms
buttonContinue.Visibility = Visibility.Collapsed;
The polling is clearly terrible (busy waiting / waste of cycles) and I'm looking for something event-based.
Any ideas?
Btw in this simplified example, one solution would be of course to split up GetResults() into two parts, invoke the first part from the start button and the second part from the continue button. In reality, the stuff happening in GetResults is more complex and different types of user input can be required at different points within the execution. So breaking up the logic into multiple methods would be non-trivial.
You can use an instance of the SemaphoreSlim Class as a signal:
private SemaphoreSlim signal = new SemaphoreSlim(0, 1);
// set signal in event
signal.Release();
// wait for signal somewhere else
await signal.WaitAsync();
Alternatively, you can use an instance of the TaskCompletionSource<T> Class to create a Task<T> that represents the result of the button click:
private TaskCompletionSource<bool> tcs = new TaskCompletionSource<bool>();
// complete task in event
tcs.SetResult(true);
// wait for task somewhere else
await tcs.Task;
When you have an unusual thing you need to await on, the easiest answer is often TaskCompletionSource (or some async-enabled primitive based on TaskCompletionSource).
In this case, your need is quite simple, so you can just use TaskCompletionSource directly:
private TaskCompletionSource<object> continueClicked;
private async void Button_Click_1(object sender, RoutedEventArgs e)
{
// Note: You probably want to disable this button while "in progress" so the
// user can't click it twice.
await GetResults();
// And re-enable the button here, possibly in a finally block.
}
private async Task GetResults()
{
// Do lot of complex stuff that takes a long time
// (e.g. contact some web services)
// Wait for the user to click Continue.
continueClicked = new TaskCompletionSource<object>();
buttonContinue.Visibility = Visibility.Visible;
await continueClicked.Task;
buttonContinue.Visibility = Visibility.Collapsed;
// More work...
}
private void buttonContinue_Click(object sender, RoutedEventArgs e)
{
if (continueClicked != null)
continueClicked.TrySetResult(null);
}
Logically, TaskCompletionSource is like an async ManualResetEvent, except that you can only "set" the event once and the event can have a "result" (in this case, we're not using it, so we just set the result to null).
Here is a utility class that I use:
public class AsyncEventListener
{
private readonly Func<bool> _predicate;
public AsyncEventListener() : this(() => true)
{
}
public AsyncEventListener(Func<bool> predicate)
{
_predicate = predicate;
Successfully = new Task(() => { });
}
public void Listen(object sender, EventArgs eventArgs)
{
if (!Successfully.IsCompleted && _predicate.Invoke())
{
Successfully.RunSynchronously();
}
}
public Task Successfully { get; }
}
And here is how I use it:
var itChanged = new AsyncEventListener();
someObject.PropertyChanged += itChanged.Listen;
// ... make it change ...
await itChanged.Successfully;
someObject.PropertyChanged -= itChanged.Listen;
Ideally, you don't. While you certainly can block the async thread, that's a waste of resources, and not ideal.
Consider the canonical example where the user goes to lunch while the button is waiting to be clicked.
If you have halted your asynchronous code while waiting for the input from the user, then it's just wasting resources while that thread is paused.
That said, it's better if in your asynchronous operation, you set the state that you need to maintain to the point where the button is enabled and you're "waiting" on a click. At that point, your GetResults method stops.
Then, when the button is clicked, based on the state that you have stored, you start another asynchronous task to continue the work.
Because the SynchronizationContext will be captured in the event handler that calls GetResults (the compiler will do this as a result of using the await keyword being used, and the fact that SynchronizationContext.Current should be non-null, given you are in a UI application), you can use async/await like so:
private async void Button_Click_1(object sender, RoutedEventArgs e)
{
await GetResults();
// Show dialog/UI element. This code has been marshaled
// back to the UI thread because the SynchronizationContext
// was captured behind the scenes when
// await was called on the previous line.
...
// Check continue, if true, then continue with another async task.
if (_continue) await ContinueToGetResultsAsync();
}
private bool _continue = false;
private void buttonContinue_Click(object sender, RoutedEventArgs e)
{
_continue = true;
}
private async Task GetResults()
{
// Do lot of complex stuff that takes a long time
// (e.g. contact some web services)
...
}
ContinueToGetResultsAsync is the method that continues to get the results in the event that your button is pushed. If your button is not pushed, then your event handler does nothing.
Simple Helper Class:
public class EventAwaiter<TEventArgs>
{
private readonly TaskCompletionSource<TEventArgs> _eventArrived = new TaskCompletionSource<TEventArgs>();
private readonly Action<EventHandler<TEventArgs>> _unsubscribe;
public EventAwaiter(Action<EventHandler<TEventArgs>> subscribe, Action<EventHandler<TEventArgs>> unsubscribe)
{
subscribe(Subscription);
_unsubscribe = unsubscribe;
}
public Task<TEventArgs> Task => _eventArrived.Task;
private EventHandler<TEventArgs> Subscription => (s, e) =>
{
_eventArrived.TrySetResult(e);
_unsubscribe(Subscription);
};
}
Usage:
var valueChangedEventAwaiter = new EventAwaiter<YourEventArgs>(
h => example.YourEvent += h,
h => example.YourEvent -= h);
await valueChangedEventAwaiter.Task;
Stephen Toub published this AsyncManualResetEvent class on his blog.
public class AsyncManualResetEvent
{
private volatile TaskCompletionSource<bool> m_tcs = new TaskCompletionSource<bool>();
public Task WaitAsync() { return m_tcs.Task; }
public void Set()
{
var tcs = m_tcs;
Task.Factory.StartNew(s => ((TaskCompletionSource<bool>)s).TrySetResult(true),
tcs, CancellationToken.None, TaskCreationOptions.PreferFairness, TaskScheduler.Default);
tcs.Task.Wait();
}
public void Reset()
{
while (true)
{
var tcs = m_tcs;
if (!tcs.Task.IsCompleted ||
Interlocked.CompareExchange(ref m_tcs, new TaskCompletionSource<bool>(), tcs) == tcs)
return;
}
}
}
With Reactive Extensions (Rx.Net)
var eventObservable = Observable
.FromEventPattern<EventArgs>(
h => example.YourEvent += h,
h => example.YourEvent -= h);
var res = await eventObservable.FirstAsync();
You can add Rx with Nuget Package System.Reactive
Tested Sample:
private static event EventHandler<EventArgs> _testEvent;
private static async Task Main()
{
var eventObservable = Observable
.FromEventPattern<EventArgs>(
h => _testEvent += h,
h => _testEvent -= h);
Task.Delay(5000).ContinueWith(_ => _testEvent?.Invoke(null, new EventArgs()));
var res = await eventObservable.FirstAsync();
Console.WriteLine("Event got fired");
}
I'm using my own AsyncEvent class for awaitable events.
public delegate Task AsyncEventHandler<T>(object sender, T args) where T : EventArgs;
public class AsyncEvent : AsyncEvent<EventArgs>
{
public AsyncEvent() : base()
{
}
}
public class AsyncEvent<T> where T : EventArgs
{
private readonly HashSet<AsyncEventHandler<T>> _handlers;
public AsyncEvent()
{
_handlers = new HashSet<AsyncEventHandler<T>>();
}
public void Add(AsyncEventHandler<T> handler)
{
_handlers.Add(handler);
}
public void Remove(AsyncEventHandler<T> handler)
{
_handlers.Remove(handler);
}
public async Task InvokeAsync(object sender, T args)
{
foreach (var handler in _handlers)
{
await handler(sender, args);
}
}
public static AsyncEvent<T> operator+(AsyncEvent<T> left, AsyncEventHandler<T> right)
{
var result = left ?? new AsyncEvent<T>();
result.Add(right);
return result;
}
public static AsyncEvent<T> operator-(AsyncEvent<T> left, AsyncEventHandler<T> right)
{
left.Remove(right);
return left;
}
}
To declare an event in the class that raises events:
public AsyncEvent MyNormalEvent;
public AsyncEvent<ProgressEventArgs> MyCustomEvent;
To raise the events:
if (MyNormalEvent != null) await MyNormalEvent.InvokeAsync(this, new EventArgs());
if (MyCustomEvent != null) await MyCustomEvent.InvokeAsync(this, new ProgressEventArgs());
To subscribe to the events:
MyControl.Click += async (sender, args) => {
// await...
}
MyControl.Click += (sender, args) => {
// synchronous code
return Task.CompletedTask;
}
Here is a small toolbox of six methods, that can be used for converting events to tasks:
/// <summary>Converts a .NET event, conforming to the standard .NET event pattern
/// based on <see cref="EventHandler"/>, to a Task.</summary>
public static Task EventToAsync(
Action<EventHandler> addHandler,
Action<EventHandler> removeHandler)
{
var tcs = new TaskCompletionSource<object>();
addHandler(Handler);
return tcs.Task;
void Handler(object sender, EventArgs e)
{
removeHandler(Handler);
tcs.SetResult(null);
}
}
/// <summary>Converts a .NET event, conforming to the standard .NET event pattern
/// based on <see cref="EventHandler{TEventArgs}"/>, to a Task.</summary>
public static Task<TEventArgs> EventToAsync<TEventArgs>(
Action<EventHandler<TEventArgs>> addHandler,
Action<EventHandler<TEventArgs>> removeHandler)
{
var tcs = new TaskCompletionSource<TEventArgs>();
addHandler(Handler);
return tcs.Task;
void Handler(object sender, TEventArgs e)
{
removeHandler(Handler);
tcs.SetResult(e);
}
}
/// <summary>Converts a .NET event, conforming to the standard .NET event pattern
/// based on a supplied event delegate type, to a Task.</summary>
public static Task<TEventArgs> EventToAsync<TDelegate, TEventArgs>(
Action<TDelegate> addHandler, Action<TDelegate> removeHandler)
{
var tcs = new TaskCompletionSource<TEventArgs>();
TDelegate handler = default;
Action<object, TEventArgs> genericHandler = (sender, e) =>
{
removeHandler(handler);
tcs.SetResult(e);
};
handler = (TDelegate)(object)genericHandler.GetType().GetMethod("Invoke")
.CreateDelegate(typeof(TDelegate), genericHandler);
addHandler(handler);
return tcs.Task;
}
/// <summary>Converts a named .NET event, conforming to the standard .NET event
/// pattern based on <see cref="EventHandler"/>, to a Task.</summary>
public static Task EventToAsync(object target, string eventName)
{
var type = target.GetType();
var eventInfo = type.GetEvent(eventName);
if (eventInfo == null) throw new InvalidOperationException("Event not found.");
var tcs = new TaskCompletionSource<object>();
EventHandler handler = default;
handler = new EventHandler((sender, e) =>
{
eventInfo.RemoveEventHandler(target, handler);
tcs.SetResult(null);
});
eventInfo.AddEventHandler(target, handler);
return tcs.Task;
}
/// <summary>Converts a named .NET event, conforming to the standard .NET event
/// pattern based on <see cref="EventHandler{TEventArgs}"/>, to a Task.</summary>
public static Task<TEventArgs> EventToAsync<TEventArgs>(
object target, string eventName)
{
var type = target.GetType();
var eventInfo = type.GetEvent(eventName);
if (eventInfo == null) throw new InvalidOperationException("Event not found.");
var tcs = new TaskCompletionSource<TEventArgs>();
EventHandler<TEventArgs> handler = default;
handler = new EventHandler<TEventArgs>((sender, e) =>
{
eventInfo.RemoveEventHandler(target, handler);
tcs.SetResult(e);
});
eventInfo.AddEventHandler(target, handler);
return tcs.Task;
}
/// <summary>Converts a generic Action-based .NET event to a Task.</summary>
public static Task<TArgument> EventActionToAsync<TArgument>(
Action<Action<TArgument>> addHandler,
Action<Action<TArgument>> removeHandler)
{
var tcs = new TaskCompletionSource<TArgument>();
addHandler(Handler);
return tcs.Task;
void Handler(TArgument arg)
{
removeHandler(Handler);
tcs.SetResult(arg);
}
}
All these methods are creating a Task that will complete with the next invocation of the associated event. This task can never become faulted or canceled, it may only complete successfully.
Usage example with a standard event (Progress<T>.ProgressChanged):
var p = new Progress<int>();
//...
int result = await EventToAsync<int>(
h => p.ProgressChanged += h, h => p.ProgressChanged -= h);
// ...or...
int result = await EventToAsync<EventHandler<int>, int>(
h => p.ProgressChanged += h, h => p.ProgressChanged -= h);
// ...or...
int result = await EventToAsync<int>(p, "ProgressChanged");
Usage example with a non-standard event:
public static event Action<int> MyEvent;
//...
int result = await EventActionToAsync<int>(h => MyEvent += h, h => MyEvent -= h);
The event is unsubscribed when the task is completed. No mechanism is provided for unsubscribing earlier than that.
Here is a class I used for testing, which support CancellationToken.
This Test method shows us awaiting an instance of ClassWithEvent's MyEvent to be raised. :
public async Task TestEventAwaiter()
{
var cls = new ClassWithEvent();
Task<bool> isRaisedTask = EventAwaiter<ClassWithEvent>.RunAsync(
cls,
nameof(ClassWithEvent.MyMethodEvent),
TimeSpan.FromSeconds(3));
cls.Raise();
Assert.IsTrue(await isRaisedTask);
isRaisedTask = EventAwaiter<ClassWithEvent>.RunAsync(
cls,
nameof(ClassWithEvent.MyMethodEvent),
TimeSpan.FromSeconds(1));
System.Threading.Thread.Sleep(2000);
Assert.IsFalse(await isRaisedTask);
}
Here's the event awaiter class.
public class EventAwaiter<TOwner>
{
private readonly TOwner_owner;
private readonly string _eventName;
private readonly TaskCompletionSource<bool> _taskCompletionSource;
private readonly CancellationTokenSource _elapsedCancellationTokenSource;
private readonly CancellationTokenSource _linkedCancellationTokenSource;
private readonly CancellationToken _activeCancellationToken;
private Delegate _localHookDelegate;
private EventInfo _eventInfo;
public static Task<bool> RunAsync(
TOwner owner,
string eventName,
TimeSpan timeout,
CancellationToken? cancellationToken = null)
{
return (new EventAwaiter<TOwner>(owner, eventName, timeout, cancellationToken)).RunAsync(timeout);
}
private EventAwaiter(
TOwner owner,
string eventName,
TimeSpan timeout,
CancellationToken? cancellationToken = null)
{
if (owner == null) throw new TypeInitializationException(this.GetType().FullName, new ArgumentNullException(nameof(owner)));
if (eventName == null) throw new TypeInitializationException(this.GetType().FullName, new ArgumentNullException(nameof(eventName)));
_owner = owner;
_eventName = eventName;
_taskCompletionSource = new TaskCompletionSource<bool>();
_elapsedCancellationTokenSource = new CancellationTokenSource();
_linkedCancellationTokenSource =
cancellationToken == null
? null
: CancellationTokenSource.CreateLinkedTokenSource(_elapsedCancellationTokenSource.Token, cancellationToken.Value);
_activeCancellationToken = (_linkedCancellationTokenSource ?? _elapsedCancellationTokenSource).Token;
_eventInfo = typeof(TOwner).GetEvent(_eventName);
Type eventHandlerType = _eventInfo.EventHandlerType;
MethodInfo invokeMethodInfo = eventHandlerType.GetMethod("Invoke");
var parameterTypes = Enumerable.Repeat(this.GetType(),1).Concat(invokeMethodInfo.GetParameters().Select(p => p.ParameterType)).ToArray();
DynamicMethod eventRedirectorMethod = new DynamicMethod("EventRedirect", typeof(void), parameterTypes);
ILGenerator generator = eventRedirectorMethod.GetILGenerator();
generator.Emit(OpCodes.Nop);
generator.Emit(OpCodes.Ldarg_0);
generator.EmitCall(OpCodes.Call, this.GetType().GetMethod(nameof(OnEventRaised),BindingFlags.Public | BindingFlags.Instance), null);
generator.Emit(OpCodes.Ret);
_localHookDelegate = eventRedirectorMethod.CreateDelegate(eventHandlerType,this);
}
private void AddHandler()
{
_eventInfo.AddEventHandler(_owner, _localHookDelegate);
}
private void RemoveHandler()
{
_eventInfo.RemoveEventHandler(_owner, _localHookDelegate);
}
private Task<bool> RunAsync(TimeSpan timeout)
{
AddHandler();
Task.Delay(timeout, _activeCancellationToken).
ContinueWith(TimeOutTaskCompleted);
return _taskCompletionSource.Task;
}
private void TimeOutTaskCompleted(Task tsk)
{
RemoveHandler();
if (_elapsedCancellationTokenSource.IsCancellationRequested) return;
if (_linkedCancellationTokenSource?.IsCancellationRequested == true)
SetResult(TaskResult.Cancelled);
else if (!_taskCompletionSource.Task.IsCompleted)
SetResult(TaskResult.Failed);
}
public void OnEventRaised()
{
RemoveHandler();
if (_taskCompletionSource.Task.IsCompleted)
{
if (!_elapsedCancellationTokenSource.IsCancellationRequested)
_elapsedCancellationTokenSource?.Cancel(false);
}
else
{
if (!_elapsedCancellationTokenSource.IsCancellationRequested)
_elapsedCancellationTokenSource?.Cancel(false);
SetResult(TaskResult.Success);
}
}
enum TaskResult { Failed, Success, Cancelled }
private void SetResult(TaskResult result)
{
if (result == TaskResult.Success)
_taskCompletionSource.SetResult(true);
else if (result == TaskResult.Failed)
_taskCompletionSource.SetResult(false);
else if (result == TaskResult.Cancelled)
_taskCompletionSource.SetCanceled();
Dispose();
}
public void Dispose()
{
RemoveHandler();
_elapsedCancellationTokenSource?.Dispose();
_linkedCancellationTokenSource?.Dispose();
}
}
It basically relies on CancellationTokenSource to report back the result.
It uses some IL injection to create a delegate to match the event's signature.
That delegate is then added as a handler for that event using some reflection.
The body of the generate method simply calls another function on the EventAwaiter class, which then reports success using the CancellationTokenSource.
Caution, do not use this, as is, in product. This is meant as a working example.
For instance, IL generation is an expensive process. You should avoid regenerate the same method over and over again, and instead cache these.
AsyncEx has AsyncManualResetEvent for this. You can:
var signal = new AsyncManualResetEvent();
await signal.WaitAsync();
And trigger it with:
signal.Set();
It sometimes want to block my thread while waiting for a event to occur.
I usually do it something like this:
private AutoResetEvent _autoResetEvent = new AutoResetEvent(false);
private void OnEvent(object sender, EventArgs e){
_autoResetEvent.Set();
}
// ...
button.Click += OnEvent;
try{
_autoResetEvent.WaitOne();
}
finally{
button.Click -= OnEvent;
}
However, it seems that this should be something that I could extract to a common class (or perhaps even something that already exists in the framework).
I would like to be able to do something like this:
EventWaiter ew = new EventWaiter(button.Click);
ew.WaitOne();
EventWaiter ew2 = new EventWaiter(form.Closing);
ew2.WaitOne();
But I can't really find a way to construct such a class (I can't find a good valid way to pass the event as an argument). Can anyone help?
To give an example of why this can be useful, consider something like this:
var status = ShowStatusForm();
status.ShowInsertUsbStick();
bool cancelled = WaitForUsbStickOrCancel();
if(!cancelled){
status.ShowWritingOnUsbStick();
WriteOnUsbStick();
status.AskUserToRemoveUsbStick();
WaitForUsbStickToBeRemoved();
status.ShowFinished();
}else{
status.ShowCancelled();
}
status.WaitUntilUserPressesDone();
This is much more concise and readable than the equivalent code written with the logic spread out between many methods. But to implement WaitForUsbStickOrCancel(), WaitForUsbStickToBeRemoved and WaitUntilUserPressesDone() (assume that the we get an event when usb sticks are inserted or removed) I need to reimplement "EventWaiter" each time. Of course you have to be careful to never run this on the GUI-thread, but sometimes that is a worthwhile tradeoff for the simpler code.
The alternative would look something like this:
var status = ShowStatusForm();
status.ShowInsertUsbStick();
usbHandler.Inserted += OnInserted;
status.Cancel += OnCancel;
//...
void OnInserted(/*..*/){
usbHandler.Inserted -= OnInserted;
status.ShowWritingOnUsbStick();
MethodInvoker mi = () => WriteOnUsbStick();
mi.BeginInvoke(WritingDone, null);
}
void WritingDone(/*..*/){
/* EndInvoke */
status.AskUserToRemoveUsbStick();
usbHandler.Removed += OnRemoved;
}
void OnRemoved(/*..*/){
usbHandler.Removed -= OnRemoved;
status.ShowFinished();
status.Done += OnDone;
}
/* etc */
I find that much harder to read. Admittedly, it is far from always that the flow will be so linear, but when it is, I like the first style.
It is comparable to using ShowMessage() and Form.ShowDialog() - they also block until some "event" occurs (though they will run a message-loop if they are called on the gui-thread).
I modified Dead.Rabit's class EventWaiter to handle EventHandler<T>. So you can use for waiting all events type of EventHandler<T>, that means your delegate is something like delegate void SomeDelegate(object sender, T EventsArgs).
public class EventWaiter<T>
{
private AutoResetEvent _autoResetEvent = new AutoResetEvent(false);
private EventInfo _event = null;
private object _eventContainer = null;
public EventWaiter(object eventContainer, string eventName)
{
_eventContainer = eventContainer;
_event = eventContainer.GetType().GetEvent(eventName);
}
public void WaitForEvent(TimeSpan timeout)
{
EventHandler<T> eventHandler = new EventHandler<T>((sender, args) => { _autoResetEvent.Set(); });
_event.AddEventHandler(_eventContainer, eventHandler);
_autoResetEvent.WaitOne(timeout);
_event.RemoveEventHandler(_eventContainer, eventHandler);
}
}
And for example I use that for waiting to get Url from HttpNotificationChannel when I registering to windows push notification service.
HttpNotificationChannel pushChannel = new HttpNotificationChannel(channelName);
//ChannelUriUpdated is event
EventWaiter<NotificationChannelUriEventArgs> ew = new EventWaiter<NotificationChannelUriEventArgs>(pushChannel, "ChannelUriUpdated");
pushChannel.Open();
ew.WaitForEvent(TimeSpan.FromSeconds(30));
Don't pass the event, pass a delegate that matches the event handler signature. This actually sounds hacky to me, so be aware of potential dead lock issues.
I've rushed together a working sample in LinqPad using reflection, getting a reference to the EventInfo object with a string (be careful as you loose compile time checking). The obvious issue is that there is no guarentee an event will ever be fired, or that the event your expecting may be fired before the EventWaiter class is ready to start blocking so I'm not sure I'd sleep comfy if I put this in a production app.
void Main()
{
Console.WriteLine( "main thread started" );
var workerClass = new WorkerClassWithEvent();
workerClass.PerformWork();
var waiter = new EventWaiter( workerClass, "WorkCompletedEvent" );
waiter.WaitForEvent( TimeSpan.FromSeconds( 10 ) );
Console.WriteLine( "main thread continues after waiting" );
}
public class WorkerClassWithEvent
{
public void PerformWork()
{
var worker = new BackgroundWorker();
worker.DoWork += ( s, e ) =>
{
Console.WriteLine( "threaded work started" );
Thread.Sleep( 1000 ); // <= the work
Console.WriteLine( "threaded work complete" );
};
worker.RunWorkerCompleted += ( s, e ) =>
{
FireWorkCompletedEvent();
Console.WriteLine( "work complete event fired" );
};
worker.RunWorkerAsync();
}
public event Action WorkCompletedEvent;
private void FireWorkCompletedEvent()
{
if ( WorkCompletedEvent != null ) WorkCompletedEvent();
}
}
public class EventWaiter
{
private AutoResetEvent _autoResetEvent = new AutoResetEvent( false );
private EventInfo _event = null;
private object _eventContainer = null;
public EventWaiter( object eventContainer, string eventName )
{
_eventContainer = eventContainer;
_event = eventContainer.GetType().GetEvent( eventName );
}
public void WaitForEvent( TimeSpan timeout )
{
_event.AddEventHandler( _eventContainer, (Action)delegate { _autoResetEvent.Set(); } );
_autoResetEvent.WaitOne( timeout );
}
}
Output
// main thread started
// threaded work started
// threaded work complete
// work complete event fired
// main thread continues after waiting
You may also try this:
class EventWaiter<TEventArgs> where TEventArgs : EventArgs
{
private readonly Action<EventHandler<TEventArgs>> _unsubHandler;
private readonly Action<EventHandler<TEventArgs>> _subHandler;
public EventWaiter(Action<EventHandler<TEventArgs>> subHandler, Action<EventHandler<TEventArgs>> unsubHandler)
{
_unsubHandler = unsubHandler;
_subHandler = subHandler;
}
protected void Handler(object sender, TEventArgs args)
{
_unsubHandler.Invoke(Handler);
TaskCompletionSource.SetResult(args);
}
public TEventArgs WaitOnce()
{
TaskCompletionSource = new TaskCompletionSource<TEventArgs>();
_subHandler.Invoke(Handler);
return TaskCompletionSource.Task.Result;
}
protected TaskCompletionSource<TEventArgs> TaskCompletionSource { get; set; }
}
Usage:
EventArgs eventArgs = new EventWaiter<EventArgs>((h) => { button.Click += new EventHandler(h); }, (h) => { button.Click -= new EventHandler(h); }).WaitOnce();
I think like these should work, didn't tried just coded.
public class EventWaiter<T> where T : EventArgs
{
private System.Threading.ManualResetEvent manualEvent;
public EventWaiter(T e)
{
manualEvent = new System.Threading.ManualResetEvent(false);
e += this.OnEvent;
}
public void OnEvent(object sender, EventArgs e)
{
manualEvent.Set();
}
public void WaitOne()
{
manualEvent.WaitOne();
}
public void Reset()
{
manualEvent.Reset();
}
}
Didn't thought about too much, but can't figure out how to make it isolated from the EventArgs.
Take a look at the MSDN ManualResetEvent and you will discover that you can kind of chain the waits and so some weird stuff.