This will be generics 101 for many but below is sample code so I can understand better.
public interface IRecordedItemsProcessor<T>
{
ObservableCollection<RecordedItem> Load(string name);
void Save();
RecordedItem Parse(T itemToParse);
}
public class FileLoadingProcessor : IRecordedItemsProcessor<string>
{
public ObservableCollection<RecordedItem> Load(string name)
{
}
public void Save()
{
}
public RecordedItem Parse(string itemToParse)
{
}
}
public class MyClass
{
public MyClass(IRecordedItemsProcessor<T> processor)
{
}
}
The issue is that MyClass needs a dependency on IRecordedItemsProcessor<T> but will not compile as it does not know what T is. How can this be resolved? Making MyClass implement a seems odd as all it needs to do is call Load/Save
Thanks
First solution is the most simple one: lift generic declaration to class level, like
public class MyClass<T>
{
public MyClass(IRecordedItemsProcessor<T> processor)
{
}
}
Then you could instantiate MyClass as following:
var myClass = new MyClass<string>(new FileLoadingProcessor());
Console.WriteLine (myClass);
Second solution is a removing generic input from constructor and inferring types. Then you don't need to specify generic exactly from call. Class declaration will look like:
public class MyClass
{
public void Process<T>(IRecordedItemsProcessor<T> processor)
{
}
}
And then you can call simply
var my = new MyClass();
my.Process(new FileLoadingProcessor());
The Idea is that you always need to specify class-level generics explicitly, but method level generics can be inferred by the compiler.
Third solutions is to encapsulate creation mechanisms inside MyClassFactory. This is quite flexible, but it might seem a little bit complicated, because descendants of IRecordedItemsProcessor<T> don't define generic at class level, so we should go to implemented interfaces and grab there generic types. And only then we can construct Generic MyClass. Listing is given below:
public class MyClassFactory
{
public MyClass<T> MakeMyClassFor<T>(IRecordedItemsProcessor<T> processor)
{
var processorGenericType = processor.GetType()
.GetInterfaces()
.Single(intr=>intr.Name == "IRecordedItemsProcessor`1")
.GetGenericArguments()[0];
var myClassType = typeof(MyClass<>).MakeGenericType(processorGenericType);
return Activator.CreateInstance(myClassType, processor) as MyClass<T>;
}
}
Now you can create MyClass very simply
var myClassFactory = new MyClassFactory();
var res = myClassFactory.MakeMyClassFor(new FileLoadingProcessor());
Console.WriteLine (res);
All of these three approaches have their pros and cons. Consider taking into account the context, in which you are going to use them.
You could do the following:
Create a new interface IRecordedItemsProcessor (non-generic)
Move Load and Save to this IRecordedItemsProcessor
Make IRecordedItemsProcessor<T> inherit from this IRecordedItemsProcessor
Make MyClass expect IRecordedItemsProcessor in its constructor
This makes it clear that MyClass doesn't care what type the processor might be able to parse, or even that it can parse things at all - it only knows that it can save and load.
You could inherit from a non-generic marker interface, this removes the need to know about T in your class:
public interface IRecordedItemsProcessor
{
}
public interface IRecordedItemsProcessor<T> : IRecordedItemsProcessor
{
ObservableCollection<RecordedItem> Load(string name);
void Save();
RecordedItem Parse(T itemToParse);
}
And then you can use any IRecordedItemsProcessor like:
public class MyClass
{
public MyClass(IRecordedItemsProcessor processor)
{
}
}
The generic type, as written, is being declared on the MyClass constructor which means the generic type must be defined at the MyClass level:
public class MyClass<T>
{
public MyClass(IRecordedItemsProcessor<T> processor)
{
}
}
However, if the generic type was declared at a method level, it would only have to be defined at the method level:
public class MyClass
{
public void MyMethod<T>( IRecordedItemsProcessor<T> processor )
{
}
}
EDIT
Based on your comment:
I want a class that can call the Load/Save methods but not be worried
that T is.
Then you'll need 2 interfaces: 1 for the load/save and then one with the parsing. In this case, you could use inheritance:
public interface IRecordedItems
{
ObservableCollection<RecordedItem> Load( string name );
void Save();
}
public interface IRecordedItemsProcessor<T> : IRecordedItems
{
RecordedItem Parse( T itemToParse );
}
public class MyClass : IRecordedItems
{
#region Implementation of IRecordedItems
public ObservableCollection<RecordedItem> Load( string name )
{
throw new NotImplementedException();
}
public void Save()
{
throw new NotImplementedException();
}
#endregion
}
EDIT 2
Based on your gist example, the type dependency could be moved off of the interface and directly into the interface method:
public class RecordedItem {}
public interface IRecordedItemsProcessor
{
ObservableCollection<RecordedItem> Load( string name );
void Save();
RecordedItem Parse<T>( T itemToParse );
}
public class MyClass
{
private readonly IRecordedItemsProcessor _processor;
public MyClass( IRecordedItemsProcessor processor )
{
_processor = processor;
processor.Parse<string>( "foo" );
processor.Parse<int>( 10 );
processor.Parse<RecordedItem>( new RecordedItem() );
}
}
Related
This is probably a classic covariance/contravariance question, it looks like it should work but I'm probably missing a trick.
I'm attempting to return a less derived type from a factory method, but I find that I cannot cast the more specialized concrete instance to a less derived base type.
public class AnimalSettings { ... }
public class CatSettings : AnimalSettings { ... }
public interface IAnimalService<TSettings> { ... }
public abstract AnimalService<TSettings> : IAnimalService<TSettings> where TSettings : AnimalSettings { ... }
public class CatService : AnimalService<CatSettings> { ... }
Then, in a factory method I have:
public static IAnimalService<AnimalSettings> GetAnimalService(AnimalType selector)
{
switch (selector)
{
case AnimalType.Cat:
return (IAnimalService<AnimalSettings>) new CatService();
break;
}
}
and the intention is to be able to do the following:
var service = MyServiceFactory.GetAnimalService(AnimalType.Cat);
service.DoAnimalBehavior();
This compiles fine, but at runtime my code is failing in the attempted cast return (IAnimalService<AnimalSettings>) new CatService();, with an InvalidCastException.
How should I be casting my more derived type to a less derived type so that callers can use that interfaced base type to invoke functionality?
Changing the cast to (IAnimalservice<CatSettings>) new CatService() does work, but it's intended that the caller receives a IAnimalservice<AnimalSettings> so that it can handle any sort of animal (In other words, the caller should not be using any of the more specialized types). Should I be specifying an in or out as part of the generic definition somewhere?
By giving a complete example it would be much easier to help. ;-)
So here is the working code. And as Sweeper already mentioned, you need to add the out parameter at the interface to make it work.
using System;
public class Program
{
public static void Main()
{
var catService = new CatService(new CatSettings());
var genericService = (IAnimalService<AnimalSettings>)catService;
genericService.DoAnimalBehavior();
}
}
public abstract class AnimalSettings
{
public abstract void DoAnimalBehavior();
}
public class CatSettings : AnimalSettings
{
public override void DoAnimalBehavior()
{
Console.WriteLine("Meeoh");
}
}
public interface IAnimalService<out TSettings>
{
void DoAnimalBehavior();
}
public abstract class AnimalService<TSettings> : IAnimalService<TSettings> where TSettings : AnimalSettings
{
private readonly TSettings _settings;
public AnimalService(TSettings settings)
{
_settings = settings;
}
public void DoAnimalBehavior()
{
_settings.DoAnimalBehavior();
}
}
public class CatService : AnimalService<CatSettings>
{
private readonly CatSettings _catSettings;
public CatService(CatSettings catSettings)
: base(catSettings)
{
_catSettings = catSettings;
}
}
lately I started to learn generics. I run into trouble with storing references to generic classes instances. As you can see, my class ListHandler can store references to specific type of BaseClass. I would love to register BaseClass instances by themselves, which is why I wanted to guarantee that they will use BaseParamClass by adding 'where'. Anyway - it does not compile.'This', does not know that T is actually BaseClassParam even with 'where' keyword in class. I don't know what is wrong here and I couldn't find answer anywhere. I would be grateful for tips/guides/solutions.
public class ListHandler
{
private List<BaseClass<BaseParamClass>> list;
public ListHandler()
{
list = new List<BaseClass<BaseParamClass>>();
}
public void Register(BaseClass<BaseParamClass> param)
{
list.Add(param);
}
}
public class BaseClass<T> where T : BaseParamClass
{
private ListHandler listHandler;
public T Param { get; private set; }
public BaseClass(ListHandler listHandler)
{
this.listHandler = listHandler;
listHandler.Register(this); //throws error
}
}
Why don't you make ListHandler generic as well?
public class ListHandler<T>
{
private List<BaseClass<T>> list;
public ListHandler()
{
list = new List<BaseClass<T>>();
}
public void Register(BaseClass<T> param)
{
list.Add(param);
}
}
public class BaseClass<T>
{
private ListHandler<T> listHandler;
public T Param { get; private set; }
public BaseClass(ListHandler<T> listHandler)
{
this.listHandler = listHandler;
listHandler.Register(this);
}
}
Also, it seems strange to me to have BaseClass<T> contain a reference to a class that has a reference to BaseClass<T> itself.
I have another option for you.
Let's split the BaseClass<T> class into two with a non-generic base, like so:
public class BaseClass
{
protected ListHandler listHandler;
public BaseClass(ListHandler listHandler)
{
this.listHandler = listHandler;
}
}
public class BaseClass<T> : BaseClass where T : BaseParamClass
{
public T Param { get; private set; }
public BaseClass(ListHandler listHandler)
: base(listHandler)
{
listHandler.Register(this); // Compiles nicely! Yay!
}
}
Now, the list inside ListHandler can be defined as private List<BaseClass> list;. That means there is no problem adding any BaseClass item to the list. We also can then define two methods for registering and fetching generic versions of the BaseClass<T> from the ListHandler. It would look like this:
public class ListHandler
{
private List<BaseClass> list;
public ListHandler()
{
list = new List<BaseClass>();
}
public void Register<T>(BaseClass<T> param) where T : BaseParamClass
{
list.Add(param);
}
public BaseClass<T> Fetch<T>() where T : BaseParamClass
{
return list.Select(x => x as BaseClass<T>).Where(x => x != null).FirstOrDefault();
}
}
So, given a class public class FooParam : BaseParamClass { } I can write this code:
ListHandler listHandler = new ListHandler();
BaseClass<FooParam> baseClass = new BaseClass<FooParam>(listHandler);
BaseClass<FooParam> baseClass2 = listHandler.Fetch<FooParam>();
Console.WriteLine(object.ReferenceEquals(baseClass, baseClass2));
The result from this code is True is written to the console - which means I can successfully fetch the instance of BaseClass<FooParam> from the ListHandler.
Why your code doesn't compile
In order to fully understand why your code doesn't compile, you'll have to dive into covariance and contravariance, which is a big topic and hard to explain in an SO answer. It can be especially confusing if you've gotten to a point where inheritance polymorphism is second nature to you; the rules are just different enough to be make your head hurt.
Here is what is confusing--
You're used to doing this:
object a = new String(...);
But generics don't let you do this!
List<object> c = new List<string>(); //Compiler error
That's because those two Lists are not related the same way that object and string are related. One does not inherit from the other. Rather, they are different variants of a generic type definition. In the generic world, you can't assign one to the other. The same is true of this:
void Foo<T>() where T: BaseParamClass
{
BaseClass<BaseParamClass> a = new BaseClass<T>(); //Compiler error
}
In this example, T could be BaseParamClass or one of its derived types. They are not the same type. So to remain type-safe, the compiler has to disallow this assignment, and your Register call, which has the same type mismatch.
Standard ways around this
You need a covariant interface. These allow assignment from derived to base. So for example, while this is still illegal:
List<object> a = new List<string>(); //Compiler error
This is totally fine:
IEnumerable<object> e = new List<string>(); //Is OK
Because IEnumerable was declared to be covariant, like this:
interface IEnumerable<out T>
Which means it is can be assigned in this way. It works because using out also adds a compiler constraint to the interface: it can be used to retrieve stuff...
interface IEnumerable<out T>
{
T Item[int index];
}
...but it cannot accept anything:
interface IEnumerable<out T>
{
Add(T item); //Compiler error
}
These constraints are what allow generics to provide early-bound type safety while still allowing certain forms of (non-inheritance) polymorphism.
What I'd suggest
Based on your comment, it sounds like you just need a container (a stack, apparently) that can hold references to these BaseClass<T> instances. If you are following separation of concerns, the stack doesn't need to actually do anything with the T, other than store it and retrieve it, and to allow it to register itself.
Since that is a separate concern, make a separate interface.
And in the interest of keeping things simple, maybe avoid using generics completely for this bit.
One way to do it--
Create an interface that allows access to everything the stack needs to know about an item it is containing. For example, if the stack contains popups of various kinds, you may want to expose the popup's title.
interface IStackable
{
string Title { get; set; }
}
Now use it like this:
public class ListHandler
{
private readonly Dictionary<string, IStackable> list;
public ListHandler()
{
list = new Dictionary<string, IStackable>();
}
public void Register(IStackable item)
{
list.Add(item.Title, item);
}
}
public class BaseClass<T> : IStackable where T : BaseParamClass
{
private ListHandler listHandler;
public T Param { get; private set; }
public BaseClass(ListHandler listHandler)
{
this.listHandler = listHandler;
listHandler.Register(this);
}
public string Title { get; set; }
}
Unless there is some other requirement, you shouldn't need to make it any more complicated than that.
All you really need to do is add an interface. This works:
public class BaseParamClass
{
}
public class ListHandler
{
private List<IBase<BaseParamClass>> list;
public ListHandler()
{
list = new List<IBase<BaseParamClass>>();
}
public void Register(IBase<BaseParamClass> param)
{
list.Add(param);
}
}
public interface IBase<T> where T : BaseParamClass
{
T Param {get; }
}
public class BaseClass : IBase<BaseParamClass>
{
private ListHandler listHandler;
public BaseParamClass Param { get; private set; }
public BaseClass(ListHandler listHandler)
{
this.listHandler = listHandler;
listHandler.Register(this);
}
}
Working code on DotNetFiddle
I have the following classes
public abstract class BaseViewPresenter { }
public abstract class BaseView<T> : UserControl
where T : BaseViewPresenter { }
public class LoginPresenter : BaseViewPresenter { }
public partial class LoginView : BaseView<LoginPresenter> { }
I have a method that looks like this (simplified)
public BaseView<BaseViewPresenter> Resolve(BaseViewPresenter model)
{
var type = model.GetType();
var viewType = _dataTemplates[type];
// Correctly creates BaseView object
var control = Activator.CreateInstance(viewType);
// Fails to cast as BaseView<BaseViewPresenter> so returns null
return control as BaseView<BaseViewPresenter>;
}
When I call this using an instances of LoginPresenter
var login = new LoginPresenter();
var ctl = Resolve(login);
The line Activator.CreateInstance(viewType) correctly resolves into a new instances of my LoginView, however control as BaseView<BaseViewPresenter> can't do the cast correctly so returns null.
Is there a way to correctly cast the control into BaseView<BaseViewPresenter> without using specific type generics?
Since LoginView inherits from BaseView<LoginPresenter>, and LoginPresenter inherits from BaseViewPresenter, I would assume there's a way to convert LoginView to BaseView<BaseViewPresenter>.
I am stuck with using .Net 3.5
This is a very frequently asked question. Let's rename your types:
abstract class Fruit { } // was BaseViewPresenter
abstract class FruitBowl<T> where T : Fruit // was BaseView
class Apple : Fruit { } // was LoginPresenter
class BowlOfApples : FruitBowl<Apple> { } // was LoginView
Your question now is:
I have a BowlOfApples, which inherits from FruitBowl<Apple>. Why can I not use it as a FruitBowl<Fruit>? An apple is a fruit, so a bowl of apples is a bowl of fruit.
No, it isn't. You can put a banana in a bowl of fruit, but you can't put a banana in a bowl of apples, and therefore a bowl of apples is not a bowl of fruit. (And by similar argument, a bowl of fruit is not a bowl of apples either.) Since the operations you can legally perform on the two types are different, they cannot be compatible.
Here is a photo of StackOverflow legend Jon Skeet demonstrating this fact:
The feature you want is called generic contravariance, and it is supported only on interfaces and delegate types when the compiler can prove that the variance is safe, and when the varying type is a reference type. For example, you can use an IEnumerable<Apple> in a context where IEnumerable<Fruit> is needed because the compiler can verify that there is no way that you can put a Banana into a sequence of fruit.
Do a search on "C# covariance and contravariance" on this site or on the web and you'll find many more details about how this feature works. In particular, my series of articles on how we designed and implemented this feature in C# 4 starts here: http://blogs.msdn.com/b/ericlippert/archive/2007/10/16/covariance-and-contravariance-in-c-part-one.aspx
I accepted Eric's answer since it provides a great explanation of why what I wanted wasn't possible, but I also thought I'd share my solution in case anyone else runs into this same problem.
I removed the generic type parameter from my original BaseView class, and created a 2nd version of the BaseView class that included the generic type parameter and specifics for it.
The first version is used by my .Resolve() method or other code that doesn't care about the specific types, and the second version is used by any code that does care, such as the implentation of a BaseView
Here's an example of how my code ended up looking
// base classes
public abstract class BaseViewPresenter { }
public abstract class BaseView : UserControl
{
public BaseViewPresenter Presenter { get; set; }
}
public abstract class BaseView<T> : BaseView
where T : BaseViewPresenter
{
public new T Presenter
{
get { return base.Presenter as T; }
set { base.Presenter = value; }
}
}
// specific classes
public class LoginPresenter : BaseViewPresenter { }
public partial class LoginView : BaseView<LoginPresenter>
{
// Can now call things like Presenter.LoginPresenterMethod()
}
// updated .Resolve method used for obtaining UI object
public BaseView Resolve(BaseViewPresenter presenter)
{
var type = model.GetType();
var viewType = _dataTemplates[type];
BaseView view = Activator.CreateInstance(viewType) as BaseView;
view.Presenter = presenter;
return view;
}
You're expecting to treat the type as being covariant with respect to the generic argument. Classes can never be covariant; you'd need to use an interface rather than (or in addition to) an abstract class to make it covariant with respect to T. You'd also need to be using C# 4.0.
My usual solution to this problem is to create an intermediary class that has access to the type-parametric class's methods through delegates. Fields can also be accessed through getters/setters.
The general pattern goes:
public abstract class Super {}
public abstract class MyAbstractType<T> where T : Super {
public MyGeneralType AsGeneralType() {
return MyGeneralType.Create(this);
}
// Depending on the context, an implicit cast operator might make things
// look nicer, though it might be too subtle to some tastes.
public static implicit operator MyGeneralType(MyAbstractType<T> t) {
return MyGeneralType.Create(t);
}
public int field;
public void MyMethod1() {}
public void MyMethod2(int argument) {}
public abstract bool MyMethod3(string argument);
}
public delegate T Getter<T>();
public delegate void Setter<T>(T value);
public delegate void MyMethod1Del();
public delegate void MyMethod2Del(int argument);
public delegate bool MyMethod3Del(string argument);
public class MyGeneralType {
public Getter<int> FieldGetter;
public Setter<int> FieldSetter;
public MyMethod1Del MyMethod1;
public MyMethod2Del MyMethod2;
public MyMethod3Del MyMethod3;
public static MyGeneralType Create<T>(MyAbstractType<T> t) where T : Super {
var g = new MyGeneralType();
g.FieldGetter = delegate { return t.field; };
g.FieldSetter = value => { t.field = value; };
g.MyMethod1 = t.MyMethod1;
g.MyMethod2 = t.MyMethod2;
g.MyMethod3 = t.MyMethod3;
return g;
}
public int field {
get { return FieldGetter(); }
set { FieldSetter(value); }
}
}
The above exemplifies getting all the methods and fields but normally I only need a few of them. This is a general solution to the problem and one could feasibly write a tool to generate these intermediary classes automatically, which I might at some point.
Try it here: https://dotnetfiddle.net/tLkmgR
Note that this is enough for all my cases, but you can be extra hacky with this:
public abstract class MyAbstractType<T> where T : Super {
// ... Same everything else ...
// data fields must become abstract getters/setters, unfortunate
public abstract int field {
get;
set;
}
public static implicit operator MyAbstractType<Super>(MyAbstractType<T> t) {
return MyGeneralType.Create(t);
}
}
public class MyGeneralType : MyAbstractType<Super> {
// ... same constructors and setter/getter
// fields but only keep method fields
// that contain the method references for
// implementations of abstract classes,
// and rename them not to clash with the
// actual method names ...
public MyMethod3Del myMethod3Ref;
// Implement abstract methods by calling the corresponding
// method references.
public override bool MyMethod3(string argument) {
return myMethod3Ref(argument);
}
// Same getters/setters but with override keyword
public override int field {
get { return FieldGetter(); }
set { FieldSetter(value); }
}
}
And there you go, now you can literally cast a MyAbstractType<Sub> where Sub : Super to a MyAbstractType<Super>, although it's no longer the same object anymore, but it does retain the same methods and data, it's sort of a complex pointer.
public class Sub : Super {}
public class MySubType : MyAbstractType<Sub> {
public int _field;
public override int field {
get { return _field; }
set { _field = value; }
}
public override bool MyMethod3(string argument) {
Console.WriteLine("hello " + argument);
return argument == "world";
}
}
public class MainClass {
public static void Main() {
MyAbstractType<Sub> sub = new MyAbstractType<Sub>();
MyAbstractType<Super> super = sub;
super.MyMethod3("hello"); // calls sub.MyMethod3();
super.field = 10; // sets sub.field
}
}
This isn't as good in my opinion, the other version of MyGeneralType is a more straighforward layer over the concrete types, plus it doesn't require rewriting the data fields, but it does actually answer the question, technically. Try it here: https://dotnetfiddle.net/S3r3ke
Example
Using these abstract classes:
public abstract class Animal {
public string name;
public Animal(string name) {
this.name = name;
}
public abstract string Sound();
}
public abstract class AnimalHouse<T> where T : Animal {
List<T> animals;
public AnimalHouse(T[] animals) {
this.animals = animals.ToList();
}
public static implicit operator GeneralAnimalHouse(AnimalHouse<T> house) {
return GeneralAnimalHouse.Create(house);
}
public List<string> HouseSounds() {
return animals.Select(animal => animal.Sound()).ToList();
}
}
We make this "general" variant:
public delegate List<string> HouseSoundsDel();
public class GeneralAnimalHouse {
public HouseSoundsDel HouseSounds;
public static GeneralAnimalHouse Create<T>(AnimalHouse<T> house) where T : Animal {
var general = new GeneralAnimalHouse();
general.HouseSounds = house.HouseSounds;
return general;
}
}
And finally with these inheritors:
public class Dog : Animal {
public Dog(string name) : base(name) {}
public override string Sound() {
return name + ": woof";
}
}
public class Cat : Animal {
public Cat(string name) : base(name) {}
public override string Sound() {
return name + ": meow";
}
}
public class DogHouse : AnimalHouse<Dog> {
public DogHouse(params Dog[] dogs) : base(dogs) {}
}
public class CatHouse : AnimalHouse<Cat> {
public CatHouse(params Cat[] cats) : base(cats) {}
}
We use it like this:
public class AnimalCity {
List<GeneralAnimalHouse> houses;
public AnimalCity(params GeneralAnimalHouse[] houses) {
this.houses = houses.ToList();
}
public List<string> CitySounds() {
var random = new Random();
return houses.SelectMany(house => house.HouseSounds())
.OrderBy(x => random.Next())
.ToList();
}
}
public class MainClass {
public static void Main() {
var fluffy = new Cat("Fluffy");
var miu = new Cat("Miu");
var snuffles = new Cat("Snuffles");
var snoopy = new Dog("Snoopy");
var marley = new Dog("Marley");
var megan = new Dog("Megan");
var catHouse = new CatHouse(fluffy, miu, snuffles);
var dogHouse = new DogHouse(snoopy, marley, megan);
var animalCity = new AnimalCity(catHouse, dogHouse);
foreach (var sound in animalCity.CitySounds()) {
Console.WriteLine(sound);
}
}
}
Output:
Miu: meow
Snoopy: woof
Snuffles: meow
Fluffy: meow
Marley: woof
Megan: woof
Notes:
I added names so it's clear that the method references carry their owner's data with them, for those unfamiliar with delegates.
The required using statements for this code are System, System.Collections.Generic, and System.Linq.
You can try it here: https://dotnetfiddle.net/6qkHL3#
A version that makes GeneralAnimalHouse a subclass of AnimalHouse<Animal> can be found here: https://dotnetfiddle.net/XS0ljg
I've a Generic type, which is used to give some meta data on an object to persist:
public class PersistedElementDefinition<T> where T: IPersistedObject{
List<PersistedPropertyDefinition<T>> PropertiesToPersist {get;set;}
}
public class PersistedPropertyDefinition<T> where T: IPersistedObject{
public Func<T, object> PropertyGetter{get;set;}
public Action<T, object> PropertySetter {get;set;}
}
and I've my IPersistedObject which can give his definition
public interface IPersistedObject{
PersistedElementDefinition<TypeOfTheImplementingType> Definition {get;}
}
The idea is that if I implement IPersistedObject I should implement it like this:
public class MyPersistedObject:IPersistedObject{
PersistedElementDefinition<MyPersistedObject> Definition{get;}
}
When I persist my class have the following thing:
I can't do the following:
public interface IPersistedObject<T>{
PersistedElementDefinition<T> Definition {get;}
}
because:
It would allow to have a MyPersistedObject<SomeOtherObject
At some point I receive an object, and I should be able to see if it implements the IPersistedObject and do some custom action with it.
For the 2, here is an example of what kind of issue I'm facing if I've a Generic interface:
public void Persist<T>(T objectToPersist)where T:IPersistedObject{
...
foreach(PersistedPropertyDefinition<T> property in objectToPersist.PropertiesToPersist){
object objectToSerialize = property.ObjectGetter(objectToPersist);
if(objectToSerialize is IPersistedObject<___Don't know how to put something generic here___>){
Persist((IPersistedObject<___Don't know how to put something generic here___>)objectToSerialize);
}
}
...
}
Is there a possibility in c# to declare an interface with a generic property of the implementing type?
You can use the curiously recurring template pattern to lock this down a bit further. It isn't bulletproof, but assuming you're not a masochist, and you don't mind the fact that it is theoretically possible to create nonsensical implementations of the interface that violate the invariants you are trying to guarantee, you can do this:
public interface IPersistedObject<T> where T : IPersistedObject<T>
{
PersistedElementDefinition<T> Definition {get;}
}
public class PersistedElementDefinition<T> where T: IPersistedObject<T>
{
...
}
public class MyPersistedObject : IPersistedObject<MyPersistedObject>
{
// Here, you are forced to implement a PersistedElementDefinition<MyPersistedObject>,
// which presumably is the reason behind this whole song and dance
PersistedDefinition<MyPersistedObject> Definition { get; }
}
The problem with this, as you noticed at the outset, is that you could simply define public class MyPersistedObject : IPersistedObject<MyOtherPersistedObject>, and end up breaking the contract you are trying to cobble together, which in plain words is the following:
A persisted object must have a gettable definition that is a persisted element definition of its own type
The C# type system is simply not equipped to handle this elegantly. My advice is to get out early, change to object or dynamic where possible and learn to live with the loss of certain compile time guarantees.
Assuming you're willing to sacrifice some compile time safety, you could do things like so:
class Program
{
static void Main(string[] args)
{
var mpo = new MyPersistedObject();
var ptp = mpo.Definition.PropertiesToPersist;
}
}
public class PersistedElementDefinition<T> where T : IPersistedObject
{
private readonly List<PersistedPropertyDefinition<T>> _propsToPersist = new List<PersistedPropertyDefinition<T>>();
public List<PersistedPropertyDefinition<T>> PropertiesToPersist
{
get { return _propsToPersist; }
}
}
public class PersistedPropertyDefinition<T> where T : IPersistedObject
{
public Func<T, object> PropertyGetter { get; set; }
public Action<T, object> PropertySetter { get; set; }
}
public interface IPersistedObject
{
dynamic Definition { get; }
}
public class MyPersistedObject : IPersistedObject
{
private readonly PersistedElementDefinition<MyPersistedObject> _definition = new PersistedElementDefinition<MyPersistedObject>();
public dynamic Definition { get { return _definition; } }
}
I have the following classes
public abstract class BaseViewPresenter { }
public abstract class BaseView<T> : UserControl
where T : BaseViewPresenter { }
public class LoginPresenter : BaseViewPresenter { }
public partial class LoginView : BaseView<LoginPresenter> { }
I have a method that looks like this (simplified)
public BaseView<BaseViewPresenter> Resolve(BaseViewPresenter model)
{
var type = model.GetType();
var viewType = _dataTemplates[type];
// Correctly creates BaseView object
var control = Activator.CreateInstance(viewType);
// Fails to cast as BaseView<BaseViewPresenter> so returns null
return control as BaseView<BaseViewPresenter>;
}
When I call this using an instances of LoginPresenter
var login = new LoginPresenter();
var ctl = Resolve(login);
The line Activator.CreateInstance(viewType) correctly resolves into a new instances of my LoginView, however control as BaseView<BaseViewPresenter> can't do the cast correctly so returns null.
Is there a way to correctly cast the control into BaseView<BaseViewPresenter> without using specific type generics?
Since LoginView inherits from BaseView<LoginPresenter>, and LoginPresenter inherits from BaseViewPresenter, I would assume there's a way to convert LoginView to BaseView<BaseViewPresenter>.
I am stuck with using .Net 3.5
This is a very frequently asked question. Let's rename your types:
abstract class Fruit { } // was BaseViewPresenter
abstract class FruitBowl<T> where T : Fruit // was BaseView
class Apple : Fruit { } // was LoginPresenter
class BowlOfApples : FruitBowl<Apple> { } // was LoginView
Your question now is:
I have a BowlOfApples, which inherits from FruitBowl<Apple>. Why can I not use it as a FruitBowl<Fruit>? An apple is a fruit, so a bowl of apples is a bowl of fruit.
No, it isn't. You can put a banana in a bowl of fruit, but you can't put a banana in a bowl of apples, and therefore a bowl of apples is not a bowl of fruit. (And by similar argument, a bowl of fruit is not a bowl of apples either.) Since the operations you can legally perform on the two types are different, they cannot be compatible.
Here is a photo of StackOverflow legend Jon Skeet demonstrating this fact:
The feature you want is called generic contravariance, and it is supported only on interfaces and delegate types when the compiler can prove that the variance is safe, and when the varying type is a reference type. For example, you can use an IEnumerable<Apple> in a context where IEnumerable<Fruit> is needed because the compiler can verify that there is no way that you can put a Banana into a sequence of fruit.
Do a search on "C# covariance and contravariance" on this site or on the web and you'll find many more details about how this feature works. In particular, my series of articles on how we designed and implemented this feature in C# 4 starts here: http://blogs.msdn.com/b/ericlippert/archive/2007/10/16/covariance-and-contravariance-in-c-part-one.aspx
I accepted Eric's answer since it provides a great explanation of why what I wanted wasn't possible, but I also thought I'd share my solution in case anyone else runs into this same problem.
I removed the generic type parameter from my original BaseView class, and created a 2nd version of the BaseView class that included the generic type parameter and specifics for it.
The first version is used by my .Resolve() method or other code that doesn't care about the specific types, and the second version is used by any code that does care, such as the implentation of a BaseView
Here's an example of how my code ended up looking
// base classes
public abstract class BaseViewPresenter { }
public abstract class BaseView : UserControl
{
public BaseViewPresenter Presenter { get; set; }
}
public abstract class BaseView<T> : BaseView
where T : BaseViewPresenter
{
public new T Presenter
{
get { return base.Presenter as T; }
set { base.Presenter = value; }
}
}
// specific classes
public class LoginPresenter : BaseViewPresenter { }
public partial class LoginView : BaseView<LoginPresenter>
{
// Can now call things like Presenter.LoginPresenterMethod()
}
// updated .Resolve method used for obtaining UI object
public BaseView Resolve(BaseViewPresenter presenter)
{
var type = model.GetType();
var viewType = _dataTemplates[type];
BaseView view = Activator.CreateInstance(viewType) as BaseView;
view.Presenter = presenter;
return view;
}
You're expecting to treat the type as being covariant with respect to the generic argument. Classes can never be covariant; you'd need to use an interface rather than (or in addition to) an abstract class to make it covariant with respect to T. You'd also need to be using C# 4.0.
My usual solution to this problem is to create an intermediary class that has access to the type-parametric class's methods through delegates. Fields can also be accessed through getters/setters.
The general pattern goes:
public abstract class Super {}
public abstract class MyAbstractType<T> where T : Super {
public MyGeneralType AsGeneralType() {
return MyGeneralType.Create(this);
}
// Depending on the context, an implicit cast operator might make things
// look nicer, though it might be too subtle to some tastes.
public static implicit operator MyGeneralType(MyAbstractType<T> t) {
return MyGeneralType.Create(t);
}
public int field;
public void MyMethod1() {}
public void MyMethod2(int argument) {}
public abstract bool MyMethod3(string argument);
}
public delegate T Getter<T>();
public delegate void Setter<T>(T value);
public delegate void MyMethod1Del();
public delegate void MyMethod2Del(int argument);
public delegate bool MyMethod3Del(string argument);
public class MyGeneralType {
public Getter<int> FieldGetter;
public Setter<int> FieldSetter;
public MyMethod1Del MyMethod1;
public MyMethod2Del MyMethod2;
public MyMethod3Del MyMethod3;
public static MyGeneralType Create<T>(MyAbstractType<T> t) where T : Super {
var g = new MyGeneralType();
g.FieldGetter = delegate { return t.field; };
g.FieldSetter = value => { t.field = value; };
g.MyMethod1 = t.MyMethod1;
g.MyMethod2 = t.MyMethod2;
g.MyMethod3 = t.MyMethod3;
return g;
}
public int field {
get { return FieldGetter(); }
set { FieldSetter(value); }
}
}
The above exemplifies getting all the methods and fields but normally I only need a few of them. This is a general solution to the problem and one could feasibly write a tool to generate these intermediary classes automatically, which I might at some point.
Try it here: https://dotnetfiddle.net/tLkmgR
Note that this is enough for all my cases, but you can be extra hacky with this:
public abstract class MyAbstractType<T> where T : Super {
// ... Same everything else ...
// data fields must become abstract getters/setters, unfortunate
public abstract int field {
get;
set;
}
public static implicit operator MyAbstractType<Super>(MyAbstractType<T> t) {
return MyGeneralType.Create(t);
}
}
public class MyGeneralType : MyAbstractType<Super> {
// ... same constructors and setter/getter
// fields but only keep method fields
// that contain the method references for
// implementations of abstract classes,
// and rename them not to clash with the
// actual method names ...
public MyMethod3Del myMethod3Ref;
// Implement abstract methods by calling the corresponding
// method references.
public override bool MyMethod3(string argument) {
return myMethod3Ref(argument);
}
// Same getters/setters but with override keyword
public override int field {
get { return FieldGetter(); }
set { FieldSetter(value); }
}
}
And there you go, now you can literally cast a MyAbstractType<Sub> where Sub : Super to a MyAbstractType<Super>, although it's no longer the same object anymore, but it does retain the same methods and data, it's sort of a complex pointer.
public class Sub : Super {}
public class MySubType : MyAbstractType<Sub> {
public int _field;
public override int field {
get { return _field; }
set { _field = value; }
}
public override bool MyMethod3(string argument) {
Console.WriteLine("hello " + argument);
return argument == "world";
}
}
public class MainClass {
public static void Main() {
MyAbstractType<Sub> sub = new MyAbstractType<Sub>();
MyAbstractType<Super> super = sub;
super.MyMethod3("hello"); // calls sub.MyMethod3();
super.field = 10; // sets sub.field
}
}
This isn't as good in my opinion, the other version of MyGeneralType is a more straighforward layer over the concrete types, plus it doesn't require rewriting the data fields, but it does actually answer the question, technically. Try it here: https://dotnetfiddle.net/S3r3ke
Example
Using these abstract classes:
public abstract class Animal {
public string name;
public Animal(string name) {
this.name = name;
}
public abstract string Sound();
}
public abstract class AnimalHouse<T> where T : Animal {
List<T> animals;
public AnimalHouse(T[] animals) {
this.animals = animals.ToList();
}
public static implicit operator GeneralAnimalHouse(AnimalHouse<T> house) {
return GeneralAnimalHouse.Create(house);
}
public List<string> HouseSounds() {
return animals.Select(animal => animal.Sound()).ToList();
}
}
We make this "general" variant:
public delegate List<string> HouseSoundsDel();
public class GeneralAnimalHouse {
public HouseSoundsDel HouseSounds;
public static GeneralAnimalHouse Create<T>(AnimalHouse<T> house) where T : Animal {
var general = new GeneralAnimalHouse();
general.HouseSounds = house.HouseSounds;
return general;
}
}
And finally with these inheritors:
public class Dog : Animal {
public Dog(string name) : base(name) {}
public override string Sound() {
return name + ": woof";
}
}
public class Cat : Animal {
public Cat(string name) : base(name) {}
public override string Sound() {
return name + ": meow";
}
}
public class DogHouse : AnimalHouse<Dog> {
public DogHouse(params Dog[] dogs) : base(dogs) {}
}
public class CatHouse : AnimalHouse<Cat> {
public CatHouse(params Cat[] cats) : base(cats) {}
}
We use it like this:
public class AnimalCity {
List<GeneralAnimalHouse> houses;
public AnimalCity(params GeneralAnimalHouse[] houses) {
this.houses = houses.ToList();
}
public List<string> CitySounds() {
var random = new Random();
return houses.SelectMany(house => house.HouseSounds())
.OrderBy(x => random.Next())
.ToList();
}
}
public class MainClass {
public static void Main() {
var fluffy = new Cat("Fluffy");
var miu = new Cat("Miu");
var snuffles = new Cat("Snuffles");
var snoopy = new Dog("Snoopy");
var marley = new Dog("Marley");
var megan = new Dog("Megan");
var catHouse = new CatHouse(fluffy, miu, snuffles);
var dogHouse = new DogHouse(snoopy, marley, megan);
var animalCity = new AnimalCity(catHouse, dogHouse);
foreach (var sound in animalCity.CitySounds()) {
Console.WriteLine(sound);
}
}
}
Output:
Miu: meow
Snoopy: woof
Snuffles: meow
Fluffy: meow
Marley: woof
Megan: woof
Notes:
I added names so it's clear that the method references carry their owner's data with them, for those unfamiliar with delegates.
The required using statements for this code are System, System.Collections.Generic, and System.Linq.
You can try it here: https://dotnetfiddle.net/6qkHL3#
A version that makes GeneralAnimalHouse a subclass of AnimalHouse<Animal> can be found here: https://dotnetfiddle.net/XS0ljg