$(document).ready(function () {
//hide the branch
var noteServiceUrl = "../../../AJAX/Common/BankingServiceAjax.svc/";
var proxyNotes = new serviceProxy(noteServiceUrl);
OnGetNotes();
function OnGetNotes() {
proxyNotes.invoke("SearchBranchesByBankID",
{ "request":
{
"BankID": 1
}
}, OnGetNotesComplete, OnError);
}
function OnGetNotesComplete(result) {
var obj = jQuery.parseJSON(result);
var notes = obj.Notes;
}
I cannot access the BankingServiceAjax.svc by usercontrol, But if do this in page, I can access the Service. The URL is correct I think I lack only one attribute that might access the BankingService in my Usercontrol.
it is going to be done in an AJAX call similar to this
$.ajax(
{
type: "GET",
url: 'http://fastmotorcycleservice.cloudapp.net/FastMotorcycleListService.svc/list/Bruno',
data: "{}",
contentType: "application/json; charset=utf-8",
dataType: "json",
success: function (data) {
Google is good too - How To Consume svc Webservice using jQuery
Related
I have a webforms application and need to make an jquery ajax call to a PageMethod (i.e. WebMethod) in code behind from my aspx page. So far it does not work for me. Is this possible?
Here is my code:
$(function()
{
setInterval(function(){
$.ajax({
type: "GET",
url: "/ClientBillingBillDetails.aspx/MyPageMethod",
data: {someData: '<%= TheData %>'},
contentType: "application/json; charset=utf-8",
dataType: "json",
success: function(result) {
}
});
}, 10000);
});
[System.Web.Services.WebMethod]
public static string MyPageMethod(int someData)
{
return "";
}
Is something wrong with my URL or something else?
Thanks
Try This:
$(function () {
setInterval(function () {
$.ajax({
type: "POST",
url: "/ClientBillingBillDetails.aspx/MyPageMethod",
data: "{ 'someData': '<%= TheData %>' }",
contentType: "application/json; charset=utf-8",
dataType: "json",
success: function (result) {
}
});
}, 10000);
});
Use type as post and make sure if you have ajax.jquery library reference added in solution.
Also i think you can remove '/' in specifying method..
Just use "ClientBillingBillDetails.aspx/MyPageMethod".
Else you can use simple pageMethods using scriptmanager
I'm using jquery ajax on dropdown change function.The problem is that even before hitting the url mentioned in the ajax request I'm getting Object object error.
The ajax request is as follows
$("#locationList").change(function () {
var locationNo = document.getElementById('<%=locationList.ClientID%>').value;
$.ajax({
url: "HealthReport.aspx/GetCashsafes",
data: "{ 'Location': '" + locationNo + "'}",
type: "POST",
dataType: "json",
contentType: "application/json; charset=utf-8",
success: function (data) {
alert("Success");
response($.each(data.d, function (key, value) {
$("#CashSafeList").append($("<option></option>").val(value.CashsafeId).html(value.CashsafeDisplaySerialNo));
}));
},
error: function (result) {
alert(result);
$("#CashSafeList").append($("<option></option>").val("-1").html("Select one"));
}
});
});
The server side code is as follows
[WebMethod]
public static string GetCashsafes(string Location)
{
Decimal userId = (Decimal)AMSECSessionData.userId;
List<Cashsafe> lstCashSafe = DropDown.getCashSafeListLocationwise(userId, Convert.ToDecimal(Location));
List<CashSafeSelect> lstCashSafeSelect = new List<CashSafeSelect>();
lstCashSafeSelect = lstCashSafe.Select(item => new CashSafeSelect()
{
CashsafeId=(decimal)item.CashsafeId,
CashsafeSerialNo=item.CashsafeSerialNo.ToString()
}).Distinct().ToList();
System.Web.Script.Serialization.JavaScriptSerializer jSearializer =
new System.Web.Script.Serialization.JavaScriptSerializer();
string sjson=jSearializer.Serialize(lstCashSafeSelect);
return sjson;
}
I've checked the string sjson and the data is returning correctly in json format.
Since the error is showing even before the url is hit,i'm confused on how to proceed further.
Any help will be appreciated.
Change the data like this
data: JSON.stringify({ 'Location': locationNo }),
Then your code will look like
$("#locationList").change(function () {
var locationNo = document.getElementById('<%=locationList.ClientID%>').value;
$.ajax({
url: "HealthReport.aspx/GetCashsafes",
data: JSON.stringify({ 'Location': locationNo }),
type: "POST",
dataType: "json",
contentType: "application/json; charset=utf-8",
success: function (data) {
alert("Success");
response($.each(data.d, function (key, value) {
$("#CashSafeList").append($("<option></option>").val(value.CashsafeId).html(value.CashsafeDisplaySerialNo));
}));
},
error: function (result) {
alert(result);
$("#CashSafeList").append($("<option></option>").val("-1").html("Select one"));
}
});
});
Edit
Since your dataType is json, you should return json, not string. Change your server side code like this,
[WebMethod]
public static List<CashSafeSelect> GetCashsafes(string Location)
{
Decimal userId = (Decimal)AMSECSessionData.userId;
List<Cashsafe> lstCashSafe = DropDown.getCashSafeListLocationwise(userId, Convert.ToDecimal(Location));
List<CashSafeSelect> lstCashSafeSelect = new List<CashSafeSelect>();
lstCashSafeSelect = lstCashSafe.Select(item => new CashSafeSelect()
{
CashsafeId=(decimal)item.CashsafeId,
CashsafeSerialNo=item.CashsafeSerialNo.ToString()
}).Distinct().ToList();
return lstCashSafeSelect;
}
You dont have to serialize those lists
Issue solved,Thanks to every one who replied especially #Anoop.
Issue was that I've set Autopostback=true for the dropdown where the ajax call is made.I've removed the autopostback property of the dropdown and now the code is working fine.
I wonder how a fresh day,clear mind helps to solve the issues.
I have been able to call WCF methods with .ajax. How do I call a method that returns a value? I need to call this method to see if data is ready and if not wait one second. The WCF method is:
[OperationContract]
[WebGet]
public bool IsDataReady(string requestGUID)
{
if (Global.publicDataDictionary.Keys.Contains(requestGUID))
return true;
else return false;
}
My JavaScript so far is:
$(document).ready(function() {
var input = {requestGUID:"<%=guid %>"};
console.log(input);
$.ajax({
url: "http://www.blah.com/services/TestsService.svc/IsDataReady",
type: "GET",
contentType: "application/json; charset=utf-8",
data: input,
dataType: "json",
success: function(data) {
}
});
EDIT2: I broke out the 2nd ajax call into a method but my logging is showing that the call to 2nd web service never passes a requestGUID. Can't i use the same input variable?
var guid = "<%= this.guid%>";
// var input = '{"SbiId":"' + guid + '"}';
// var input = {requestGUID:"ca222cf7-be5e-431a-ab93-9a31e8ae2f4a"};
function callUpdateGrid(input) {
console.log(input);
$.ajax({
url: "http://www.blah.com/services/TestsService.svc/GetContactsDataAndCountbyGUID",
type: "GET",
contentType: "application/json; charset=utf-8",
data: input,
dataType: "json",
success: function (data) {
var mtv = $find("<%= RadGrid1.ClientID %>").get_masterTableView();
console.log(data);
mtv.set_dataSource(data.d.Data);
mtv.dataBind();
}
});
}
function CallIsDataReady(input) {
$.ajax({
url: "http://www.blah.com/services/TestsService.svc/IsDataReady",
type: "GET",
contentType: "application/json; charset=utf-8",
data: input,
dataType: "json",
success: function (data) {
if (!data) {
setTimeout(function (inputInner) { CallIsDataReady(inputInner); }, 1000);
}
else {
//Continue as data is ready
callUpdateGrid(input);
}
}
});
}
$(document).ready(function () {
var input = { requestGUID: "<%=guid %>" };
CallIsDataReady(input);
});
EDIT2: I broke out the 2nd ajax call into a method but my logging is showing that the call to 2nd web service is never getting called:
url: "http://www.blah.com/services/TestsService.svc/GetContactsDataAndCountbyGUID",
else {
//Continue as data is ready
callUpdateGrid(input);
}
The return value will be contained in the data parameter passed to the success callback setup in your ajax call.
You will need to check the value here, then if false, setup a timeout, which on expiry will attempt the ajax call again.
It would be best IMO to wrap up the Ajax call inside a function, that you can call in a recursive fashion when the timeout has expired. e.g.
function CallIsDataReady(input){
$.ajax({
url: "http://www.blah.com/services/TestsService.svc/IsDataReady",
type: "GET",
contentType: "application/json; charset=utf-8",
data: input,
dataType: "json",
success: function(data) {
if (!data){
setTimeout(function(){CallIsDataReady(input);}, 1000);
}
else{
//Continue as data is ready
}
}
});
}
$(document).ready(function() {
var input = {requestGUID:"<%=guid %>"};
console.log(input);
CallIsDataReady(input);
});
When you view source on this page is:
var input = {requestGUID:"<%=guid %>"};
showing correctly in the javascript? If you put a breakpoint in your IsDataReady method, do you see if requestGUID has a value? Is your service on the same domain as the page calling it?
EDIT:
In your service change: [WebGet]
to:
[WebGet(
RequestFormat=WebMessageFormat.Json,
ResponseFormat=WebMessageFormat.Json]
Read up on RESTful web services:
http://www.codeproject.com/Articles/105273/Create-RESTful-WCF-Service-API-Step-By-Step-Guide
I am using the below code to call a ashx page. But it's not working for me. I have place my code here. I always got the error message message "Request Failed". Please help me..
<script type="text/javascript">
function CallLoginHandler(user, pass) {
alert(user);//Got value
alert(pass);//Got Value
$(function(){
$.ajax({
type: "POST",
url: "../handler/JQGridHandler.ashx?MainPage=GetUserDetails&Type=2&user=" + user + "&pass=" + pass + "",
contentType: "application/json; charset=utf-8",
dataType: "json",
success: OnComplete,
error: OnFail
});
return false;
});
}
function OnComplete(result) {
alert([result.Id, result.Name, result.Age, result.Department]);
}
function OnFail(result) {
alert('Request Failed');
}
</script>
remove these lines:
$(function(){ // <----remove this
return false; // and this
}); // and this too
Update to this function:
function CallLoginHandler(user, pass) {
$.ajax({
type: "POST",
url: "../handler/JQGridHandler.ashx", // updated url
data: { // pass your data like this since type is post
MainPage:"GetUserDetails",
Type:2,
user:user,
pass:pass
},
contentType: "application/json; charset=utf-8",
dataType: "json",
success: OnComplete,
error: OnFail
});
}
and also your url is not correct:
url: "../handler/JQGridHandler...... + pass + "",
// --here you have a blank `""` after pass-----^
and since your type: "post" so you can pass the data like this:
data: {
MainPage:"GetUserDetails",
Type:2,
user:user,
pass:pass
},
Separate your string into a javascript object to be encoded and sent to the server as JSON based on your content type. Also, get rid of $(function(){ in your function call, it's useless here.
$.ajax({
type: "POST",
url: "../handler/JQGridHandler.ashx';
contentType: "application/json; charset=utf-8",
dataType: "json",
data: {
MainPage: 'GetUserDetails',
Type: 2,
user: user,
pass: pass
}
success: OnComplete,
error: OnFail
});
If this doesn't work, then the issue is likely one of the following:
The URL address is wrong
The server is evaluating a GET as opposed to a POST request
The server expects, application/x-www-form-urlencoded but you've declared it's json
You have a routing issue
Note: Do not send your user and pass in query string.
function CallLoginHandler(user, pass) {
$.ajax({
type: "POST",
url: "../handler/JQGridHandler.ashx",
data: {
MainPage: 'GetUserDetails',
Type: 2,
user: user,
pass: pass
},
// DO NOT SET CONTENT TYPE to json
// contentType: "application/json; charset=utf-8",
// DataType needs to stay, otherwise the response object
// will be treated as a single string
dataType: "json",
success: OnComplete,
error: OnFail
});
});
}
Your handler.ashx file
using System;
using System.Web;
using Newtonsoft.Json;
public class Handler : IHttpHandler
{
public void ProcessRequest(HttpContext context)
{
context.Response.ContentType = "text/plain";
string user= context.Request.Form["user"];
//.....
var wrapper = new { d = myName };
// in order to use JsonConvert you have to download the
// Newtonsoft.Json dll from here http://json.codeplex.com/
context.Response.Write(JsonConvert.SerializeObject(wrapper));
}
public bool IsReusable
{
get
{
return false;
}
}
}
source
Is it possible to accomplish something like this?
<script type="text/javascript">
function getValues( keysArray ) {
var valuesArray = new Array(keysArray.length);
for (var i = 0; i < keysArray.length; i++) {
valuesArray[i] = #this.LocalResources(keysArray[i]);
}
return valuesArray;
}
getValues function will get executed on the browser. Razor is going to execute before the page is send to the browser. there for this wouldn't work.
If you wanted to call the LocalResources method on the server you could to expose a controller action and perform a ajax request from the client.
Perhaps something like this on the browser:
Javascript
function getValues( keysArray ) {
$.ajax({
url: "/Controller/getValues",
type: "POST",
dataType: "json",
contentType: "application/json; charset=utf-8",
async: true,
data: JSON.stringify({ "keysArray" : keysArray }),
success: function (result) {
//result obj is your array of resources
}
});
MVC Controller
public JSONResult getValues(object keysArray)
{
///Build respurce array here
}
Ajax request, or;
loading the list of necessary Resources keys in page and then accessing them by JS.