We Keep Coding

Outer Glow Effect for Text C#

i want to have outer glow text in a label for my winform application some thing like:
i searched for it in stackoverflow and I found this:
private void Form1_Paint(object sender, System.Windows.Forms.PaintEventArgs e)
{
//Create a bitmap in a fixed ratio to the original drawing area.
Bitmap bm=new Bitmap(this.ClientSize.Width/5, this.ClientSize.Height/5);
//Create a GraphicsPath object.
GraphicsPath pth=new GraphicsPath();
//Add the string in the chosen style.
pth.AddString("Text Halo",new FontFamily("Verdana"),(int)FontStyle.Regular,100,new Point(20,20),StringFormat.GenericTypographic);
//Get the graphics object for the image.
Graphics g=Graphics.FromImage(bm);
//Create a matrix that shrinks the drawing output by the fixed ratio.
Matrix mx=new Matrix(1.0f/5,0,0,1.0f/5,-(1.0f/5),-(1.0f/5));
//Choose an appropriate smoothing mode for the halo.
g.SmoothingMode=SmoothingMode.AntiAlias;
//Transform the graphics object so that the same half may be used for both halo and text output.
g.Transform=mx;
//Using a suitable pen...
Pen p=new Pen(Color.Yellow,3);
//Draw around the outline of the path
g.DrawPath(p,pth);
//and then fill in for good measure.
g.FillPath(Brushes.Yellow,pth);
//We no longer need this graphics object
g.Dispose();
//this just shifts the effect a little bit so that the edge isn't cut off in the demonstration
e.Graphics.Transform=new Matrix(1,0,0,1,50,50);
//setup the smoothing mode for path drawing
e.Graphics.SmoothingMode=SmoothingMode.AntiAlias;
//and the interpolation mode for the expansion of the halo bitmap
e.Graphics.InterpolationMode=InterpolationMode.HighQualityBicubic;
//expand the halo making the edges nice and fuzzy.
e.Graphics.DrawImage(bm,ClientRectangle,0,0,bm.Width,bm.Height,GraphicsUnit.Pixel);
//Redraw the original text
e.Graphics.FillPath(Brushes.Black,pth);
//and you're done.
pth.Dispose();
}
but the PROBLEM IS I CAN NOT MOVE IT please help me i need it to be movable and I want to be able to change it's size. the code above, just adds it automatically to somewhere in my form but I want to move that.
thank you

A better approach is to create a custom control for this to use/add some relevant drawing properties. Mainly, the Font and color of the text, the size and color of the outline. Then, you can lay out the custom control in any container at any location and with any size.
Here's a simple example.
[DesignerCategory("Code")]
public class GlowTextLabel : Control
{
private Color outlineColor = SystemColors.Highlight;
private int outlineSize = 1;
public GlowTextLabel() : base()
{
SetStyle(ControlStyles.Selectable, false);
SetStyle(ControlStyles.OptimizedDoubleBuffer |
ControlStyles.ResizeRedraw |
ControlStyles.SupportsTransparentBackColor, true);
}
[DefaultValue(typeof(Color), "Highlight")]
public Color OutlineColor
{
get => outlineColor;
set
{
if (outlineColor != value)
{
outlineColor = value;
Invalidate();
}
}
}
[DefaultValue(1)]
public int OutlineSize
{
get => outlineSize;
set
{
if (outlineSize != value)
{
outlineSize = Math.Max(1, value);
Invalidate();
}
}
}
protected override void OnTextChanged(EventArgs e)
{
base.OnTextChanged(e);
Invalidate();
}
protected override void OnPaint(PaintEventArgs e)
{
e.Graphics.Clear(BackColor);
var w = Math.Max(8, ClientSize.Width / 5);
var h = Math.Max(8, ClientSize.Height / 5);
using (var bmp = new Bitmap(w, h))
using (var gp = new GraphicsPath())
using (var sf = new StringFormat(StringFormat.GenericTypographic))
{
sf.Alignment = sf.LineAlignment = StringAlignment.Center;
gp.AddString(Text,
Font.FontFamily, (int)Font.Style, GetEmFontSize(Font),
ClientRectangle, sf);
using (var g = Graphics.FromImage(bmp))
using (var m = new Matrix(1.0f / 5, 0, 0, 1.0f / 5, -(1.0f / 5), -(1.0f / 5)))
{
g.SmoothingMode = SmoothingMode.AntiAlias;
g.Transform = m;
using (var pn = new Pen(OutlineColor, OutlineSize))
{
g.DrawPath(pn, gp);
g.FillPath(pn.Brush, gp);
}
}
e.Graphics.InterpolationMode = InterpolationMode.HighQualityBicubic;
// Optional for wider blur...
// e.Graphics.CompositingQuality = CompositingQuality.HighQuality;
e.Graphics.DrawImage(bmp,
ClientRectangle, 0, 0, bmp.Width, bmp.Height,
GraphicsUnit.Pixel);
e.Graphics.SmoothingMode = SmoothingMode.AntiAlias;
using (var br = new SolidBrush(ForeColor))
e.Graphics.FillPath(br, gp);
}
}
}
private float GetEmFontSize(Font fnt) =>
fnt.SizeInPoints * (fnt.FontFamily.GetCellAscent(fnt.Style) +
fnt.FontFamily.GetCellDescent(fnt.Style)) / fnt.FontFamily.GetEmHeight(fnt.Style);
Rebuild, find the GlowTextLabel control on the ToolBox under your project's components group, drop an instance, try the Font, ForeColor, OutlineColor, and OutlineSize properties with different values.
Pen width 1.
Pen width 10.
Pen width 20.

Print Text with DrawString() next to an existing bitmap

Greetings fellow users,
A virgin post on my end since its the first time i am abusing stack overflow with a question! I have been trying to get a bitmap print along with a String to print. Basically the view i want to achieve is the Image and the text to the right of the image as we see the printout. Below is the code I am using
Bitmap qrCodeImage = qrCode.GetGraphic(20);
senderQR = qrCodeImage;
PrintDocument pd = new PrintDocument();
Margins margins = new Margins(10, 10, 10, 10);
pd.DefaultPageSettings.Margins = margins;
pd.PrintPage += PrintPage;
pd.Print();
Here is the PrintPage method
private void PrintPage(object sender, PrintPageEventArgs e)
{
System.Drawing.Image img = senderQR;
Bitmap batchCode = new Bitmap(80, 700);
Rectangle m = e.MarginBounds;
RectangleF batch1 = new RectangleF(80, 700, 650, 1000);
m.Width = img.Width / 5;
m.Height = img.Height / 5;
Graphics g = Graphics.FromImage(batchCode);
g.SmoothingMode = System.Drawing.Drawing2D.SmoothingMode.AntiAlias;
g.InterpolationMode = System.Drawing.Drawing2D.InterpolationMode.HighQualityBilinear;
g.PixelOffsetMode = System.Drawing.Drawing2D.PixelOffsetMode.HighQuality;
g.DrawString(batch, new Font("Arial", 40), Brushes.Black, batch1);
g.Flush();
e.Graphics.DrawImage(img, m);
}
What am i doing wrong? what seems to be the issue? I have been struggling a whole lot to achieve this but no luck!
Additional Notes:
I want the text on the right to Wrap under itself and not under or on top of the existing bitmap within a size of 3,5 x 2 (inches) (label printing).
This is the printout i get with the existing code;
https://prnt.sc/h1ecb0
https://prnt.sc/h1edex

The image you're drawing on (batchCode) is 80 pixels wide and 700 high. When you write your text over it, you set the top-left point of your writing to 80,700 - exactly to the bottom-right corner of your picture. Basically, you write your text outside of the picture.
Update
I've created a small example to make it reproducible, below is a form class for a basic WinForms application:
public partial class Form1 : Form
{
private PictureBox pictureBox2;
public Form1()
{
InitializeComponent();
pictureBox2 = new PictureBox();
pictureBox2.Size = ClientSize;
pictureBox2.SizeMode = PictureBoxSizeMode.AutoSize;
this.Click += Form1_Click;
pictureBox2.Click += Form1_Click;
Controls.Add(pictureBox2);
}
private void Form1_Click(object sender, EventArgs e)
{
var batch = "hello there!";
Bitmap batchCode = new Bitmap(1000, 1000);
var batch1 = new RectangleF(150, 150, 850, 850);
using (Graphics g = Graphics.FromImage(batchCode))
{
g.SmoothingMode = System.Drawing.Drawing2D.SmoothingMode.AntiAlias;
g.InterpolationMode = System.Drawing.Drawing2D.InterpolationMode.HighQualityBilinear;
g.PixelOffsetMode = System.Drawing.Drawing2D.PixelOffsetMode.HighQuality;
g.DrawString(batch, new Font("Arial", 40), Brushes.Black, batch1);
}
pictureBox2.Image = batchCode;
}
}

Auto crop a rectangle

I want to auto crop the image which I took it from tablet camera. Actually I want to take the picture of id cards and need to auto corp it, I am using black background but sometimes it is too glaze and there is a reflection also, at that time its not cropped properly. Can anyone assist me with c# code to crop the images(Note : I am using phone cameras to take the image of id cards, mostly the background will be black and sometime it will be some other things).
Below I mentioned my code also:
private void ProcessImage(Bitmap bitmap)
{
// lock image
BitmapData bitmapData = bitmap.LockBits(
new Rectangle(0, 0, bitmap.Width, bitmap.Height),
ImageLockMode.ReadWrite, bitmap.PixelFormat);
// step 1 - turn background to black
ColorFiltering colorFilter = new ColorFiltering();
colorFilter.Red = new IntRange(0, 64);
colorFilter.Green = new IntRange(0, 64);
colorFilter.Blue = new IntRange(0, 64);
colorFilter.FillOutsideRange = false;
colorFilter.ApplyInPlace(bitmapData);
// step 2 - locating objects
BlobCounter blobCounter = new BlobCounter();
blobCounter.FilterBlobs = true;
blobCounter.MinHeight = 5;
blobCounter.MinWidth = 5;
blobCounter.ProcessImage(bitmapData);
Blob[] blobs = blobCounter.GetObjectsInformation();
bitmap.UnlockBits(bitmapData);
// step 3 - check objects' type and highlight
SimpleShapeChecker shapeChecker = new SimpleShapeChecker();
Graphics g = Graphics.FromImage(bitmap);
Pen yellowPen = new Pen(Color.Yellow, 2); // circles
Pen redPen = new Pen(Color.Red, 2); // quadrilateral
Pen brownPen = new Pen(Color.Brown, 2); // quadrilateral with known sub-type
Pen greenPen = new Pen(Color.Green, 2); // known triangle
Pen bluePen = new Pen(Color.Blue, 2); // triangle
for (int i = 0, n = blobs.Length; i < n; i++)
{
List<IntPoint> edgePoints = blobCounter.GetBlobsEdgePoints(blobs[i]);
DoublePoint center;
double radius;
List<IntPoint> corners;
// is triangle or quadrilateral
if (shapeChecker.IsConvexPolygon(edgePoints, out corners))
{
// get sub-type
PolygonSubType subType = shapeChecker.CheckPolygonSubType(corners);
Pen pen;
if (subType == PolygonSubType.Rectangle)
{
pen = (corners.Count == 4) ? redPen : bluePen;
}
else
{
pen = (corners.Count == 4) ? brownPen : greenPen;
}
//g.DrawPolygon( pen, ToPointsArray( corners ) );
if (pen.Color.Name == "Red")
{
int intdummy = 0;
g.DrawRectangle(pen, corners[0].X, corners[0].Y, 1150, 750);
//Code for corpping///////
pictureBox2.Image = bitmap;
pictureBox2.SizeMode = PictureBoxSizeMode.StretchImage;
Bitmap croppedBitmap = new Bitmap("E:\\xxx\\Vicas Tablet\\WinImager\\cropimage\\cropimage\\Testing Images\\Image1.jpg");
//croppedBitmap = croppedBitmap.Clone(new Rectangle(corners[0].X, corners[0].Y,1150,750),System.Drawing.Imaging.PixelFormat.DontCare);
croppedBitmap = croppedBitmap.Clone(
new Rectangle(corners[0].X, corners[0].Y, ((int)corners[1].X - (int)corners[0].X), ((int)corners[2].Y - (int)corners[1].Y)), System.Drawing.Imaging.PixelFormat.DontCare);
pictureBox2.Image = croppedBitmap;
////End code for cropping///////////
}
}

Merging 2 images using C#

I want to merge two pictures in my C# program.
the first one is any picture in grayscale mode, and the second one is like in this picture:
Both of the pictures/images have the same size, and this is my code:
Bitmap first = new Bitmap (picturebox1.image);
Bitmap second = new Bitmap (picturebox2.image);
Bitmap result = new Bitmap (first.width, first.height);
Graphics g = Graphics.FromImage(result);
g.DrawImageUnscaled(first, 0, 0);
g.Flush();
g.DrawImageUnscaled(second, 0, 0);
g.Flush();
picturebox3.image = result;
I can join those picture, but the result has smaller size than the two originals (both pictures have same size). Could anyone give me some suggestions?
Additionally, I want the result picture has condition like this :
if the edge pixel in 2nd picture dropped to the bright side at the 1st one, it will be dark, otherwise when the edge dropped to the dark side, it will be bright (seem glow).
so the text will be semi transparent.
Here's an example of the results I want.
Could anyone give some suggestions please?

It was for joining
Bitmap first = new Bitmap (picturebox1.Image);
Bitmap second = new Bitmap (picturebox2.Image);
Bitmap result = new Bitmap (first.Width+first.Width, first.Height);
Graphics g = Graphics.FromImage(result);
g.DrawImageUnscaled(first, 0, 0);
g.DrawImageUnscaled(second,first.Width, 0);
Try this for merging one on top another . set alpha by yourself ( red: U can use BitMap.MakeTransParent if u not want alpha)
public Bitmap SetImageOpacity(Image image, float opacity)
{
try
{
//create a Bitmap the size of the image provided
Bitmap bmp = new Bitmap(image.Width, image.Height);
//create a graphics object from the image
using (Graphics gfx = Graphics.FromImage(bmp))
{
//create a color matrix object
ColorMatrix matrix = new ColorMatrix();
//set the opacity
matrix.Matrix33 = opacity;
//create image attributes
ImageAttributes attributes = new ImageAttributes();
//set the color(opacity) of the image
attributes.SetColorMatrix(matrix, ColorMatrixFlag.Default, ColorAdjustType.Bitmap);
//now draw the image
gfx.DrawImage(image, new Rectangle(0, 0, bmp.Width, bmp.Height), 0, 0, image.Width, image.Height, GraphicsUnit.Pixel, attributes);
}
return bmp;
}
catch (Exception ex)
{
return null;
}
}
private void button1_Click(object sender, EventArgs e)
{
Bitmap first = new Bitmap(pictureBox1.Image);
Bitmap second = SetImageOpacity(pictureBox2.Image, 0.5f);
//Bitmap result = new Bitmap(first.Width, first.Height);
//fix :
Bitmap result = new Bitmap(Math.Max(first.Width,second.Width), Math.Max(first.Height,second.Height));
Console.WriteLine(first.Width);
Graphics g = Graphics.FromImage(result);
g.DrawImageUnscaled(first, 0, 0);
g.DrawImageUnscaled(second, 0, 0);
pictureBox3.Image = result;
result.Save("result.jpg" );
}
}
}
And Coming For watermark why not you want to use Drawstring with alpha
here is article for all these http://www.codeproject.com/Articles/5034/How-to-implement-Alpha-blending

You need to include the System.Drawing.Imaging namespace to make this code work.
Go through following code:
private void CombineImages(FileInfo[] files)
{
//change the location to store the final image.
string finalImage = #"C:\\MyImages\\FinalImage.jpg";
List imageHeights = new List();
int nIndex = 0;
int width = 0;
foreach (FileInfo file in files)
{
Image img = Image.FromFile(file.FullName);
imageHeights.Add(img.Height);
width += img.Width;
img.Dispose();
}
imageHeights.Sort();
int height = imageHeights[imageHeights.Count - 1];
Bitmap img3 = new Bitmap(width, height);
Graphics g = Graphics.FromImage(img3);
g.Clear(SystemColors.AppWorkspace);
foreach (FileInfo file in files)
{
Image img = Image.FromFile(file.FullName);
if (nIndex == 0)
{
g.DrawImage(img, new Point(0, 0));
nIndex++;
width = img.Width;
}
else
{
g.DrawImage(img, new Point(width, 0));
width += img.Width;
}
img.Dispose();
}
g.Dispose();
img3.Save(finalImage, System.Drawing.Imaging.ImageFormat.Jpeg);
img3.Dispose();
imageLocation.Image = Image.FromFile(finalImage);
}
Follow Link:
http://www.niteshluharuka.com/2012/08/combine-several-images-to-form-a-single-image-using-c/

This codeproject article shows how to watermark an image with text as well as another image.
In summary, what you have to do is draw your watermark image over the image with the desired transparency.

saving drawn image into folder

I have drawn an image in pictureBox, now i want to save it in the folder. I have tried so many ways nothing worked. I am drawing image using the fallowing code. I am drawing the image based on Textbox values.
private void btnTransferBottleRegenerate_Click(object sender, EventArgs e)
{
float[] volumetransfer = new float[1];
volumetransfer[0] = float.Parse(txtTransferVolume.Text);
int[] percentages = new int[6];
percentages[0] = int.Parse(txtTransferNotIdentified.Text);
percentages[1] = int.Parse(txtTransferWaterBasedMud.Text);
percentages[2] = int.Parse(txtTransferOilBasedMud.Text);
percentages[3] = int.Parse(txtTransferWater.Text);
percentages[4] = int.Parse(txtTransferHydrocarbonLiq.Text);
percentages[5] = int.Parse(txtTransferGas.Text);
Color[] colors = new Color[6];
colors[0] = Color.Gray;
colors[1] = Color.Chocolate;
colors[2] = Color.SaddleBrown;
colors[3] = Color.Blue;
colors[4] = Color.Red;
colors[5] = Color.Lime;
// Finally, call the method
DrawPercentages(percentages, colors, volumetransfer);
//string filename = Application.StartupPath + "\\volumetransfer.jpg";
// pictureBox1.Image.Save(Application.StartupPath + "\\Image\\picture1.jpg");
// pictureBox1.Refresh();
// if (pictureBox1 != null)
// {
pictureBox1.Image.Save(Application.StartupPath + "\\test.bmp");
// }
}
private void DrawPercentages(int[] percentages, Color[] colors, float[] volumetransfer)
{
// Create a Graphics object to draw on the picturebox
Graphics G = pictureBox1.CreateGraphics();
// Calculate the number of pixels per 1 percent
float pixelsPerPercent = pictureBox1.Height / volumetransfer[0];
// Keep track of the height at which to start drawing (starting from the bottom going up)
int drawHeight = pictureBox1.Height;
// Loop through all percentages and draw a rectangle for each
for (int i = 0; i < percentages.Length; i++)
{
// Create a brush with the current color
SolidBrush brush = new SolidBrush(colors[i]);
// Update the height at which the next rectangle is drawn.
drawHeight -= (int)(pixelsPerPercent * percentages[i]);
// Draw a filled rectangle
G.FillRectangle(brush, 0, drawHeight, pictureBox1.Width, pixelsPerPercent * percentages[i]);
}
}
}
}
when I click "Regenerate" button then it is going to draw the image in pictureBox after that i want to save it in a folder. I have the design like this.

A solution is draw on a bitmap, set it as the image of the PictureBox and then save it:
private void DrawPercentages(int[] percentages, Color[] colors, float[] volumetransfer){
Bitmap bmp = new Bitmap(pictureBox1.Width, pictureBox1.Height);
using(Graphics G = Graphics.FromImage(bmp)){
//...
}
pictureBox1.Image = bmp;
}
And then your code should work perfectly without any problem.

First, you should paint within the correct event PictureBox1_Paint so that your drawn image stays visible (better: got repaint) even if your window gets eg: resized.
Afterwards you could make use of a snippet posted by #Hans Passant - How to save Graphics object to save your drawn image to disk.
// global to be accesible within paint
float[] volumetransfer = new float[1];
int[] percentages = new int[6];
Color[] colors = new Color[6];
private void btnTransferBottleRegenerate_Click(object sender, EventArgs e)
{
/// initialization goes here
// force pictureBox to be redrawn
// so resizing your window won't let your rectangles disapear
pictureBox1.Invalidate();
using (var bmp = new Bitmap(pictureBox1.Width, pictureBox1.Height))
{
pictureBox1.DrawToBitmap(bmp, new Rectangle(0, 0, bmp.Width, bmp.Height));
bmp.Save(#"e:\temp\test.png"); //Application.StartupPath + "\\Image\\picture1.jpg"
}
}
private void pictureBox1_Paint(object sender, PaintEventArgs e)
{
// use GraphicsObject of PaintEventArgs
Graphics G = e.Graphics;
float pixelsPerPercent = pictureBox1.Height / volumetransfer[0];
int drawHeight = pictureBox1.Height;
for (int i = 0; i < percentages.Length; i++)
{
SolidBrush brush = new SolidBrush(colors[i]);
drawHeight -= (int)(pixelsPerPercent * percentages[i]);
G.FillRectangle(brush, 0, drawHeight, pictureBox1.Width, pixelsPerPercent * percentages[i]);
}
}
On the other hand your DrawPercentage(..) could return a new Image - which you could afterwards assign to the pictureBox and save it with pictureBox1.Image.Save(...)
private void button1_Click(object sender, EventArgs e)
{
float[] volumetransfer = new float[1];
int[] percentages = new int[6];
Color[] colors = new Color[6];
/// initialization goes here
pictureBox1.Image = CreateImage(volumetransfer, percentages, colors);
pictureBox1.Image.Save(#"e:\temp\test.png");
}
private Image CreateImage(float[] volumetransfer, int[] percentages, Color[] colors)
{
Image img = new Bitmap(pictureBox1.Width, pictureBox1.Height);
Graphics g = Graphics.FromImage(img);
float pixelsPerPercent = pictureBox1.Height / volumetransfer[0];
int drawHeight = pictureBox1.Height;
for (int i = 0; i < percentages.Length; i++)
{
SolidBrush brush = new SolidBrush(colors[i]);
drawHeight -= (int)(pixelsPerPercent * percentages[i]);
g.FillRectangle(brush, 0, drawHeight, pictureBox1.Width, pixelsPerPercent * percentages[i]);
}
return img;
}