I've got a problem using ASP.NET WebAPI Controller. What i try to build is a controller which contains two actions that can be called by a http-get. What i have so far:
[HttpGet]
public IList<Model> Get()
{
...
}
[HttpGet]
public IList<Model> GetAllWorkshops()
{
...
}
I also edited my RouteConfig.cs to the following:
routes.MapHttpRoute(
name: "API Default With ID",
routeTemplate: "api/{controller}/{action}/{id}",
defaults: new { id = RouteParameter.Optional }
);
routes.MapHttpRoute(
name: "API Default",
routeTemplate: "api/{controller}/{action}"
);
routes.MapRoute(
name: "Default",
url: "{controller}/{action}/{id}",
defaults: new { controller = "Home", action = "Index", id =UrlParameter.Optional }
);
The strange behaviour is that if i call : http://localhost:1536/Api/Workshop/Get or localhost:1536/Api/Workshop/GetAllWorkshops, i get the exception that multiple actions were found that match this request. But if i call localhost:1536/Api/Workshop/Get/1 or localhost:1536/Api/Workshop/GetAllWorkshops/1 it was works perfectly. So i think that the route with the id works. But why do the other two requests throw these exceptions?
I tried almost every imaginable route. It would be great if you find my mistakes!
Thank you very much!
Because route named "API Default With ID" has id as optional, so /api/workshop/get matched both the first and second route, hence the error.
To fix this error, you can remove second route because it is just a subset of the first route template.
However, it is better to use new Attribute Routing introduced in Web API 2, it is by far more maintainable and easy to understand than using old-style mapping.
If you use attribute mapping, your class will look like:
[RoutePrefix("api/workshop")]
public class WorkshopController : ApiController {
[HttpGet]
[Route("Get")]
public IList<Model> Get()
{
...
}
[HttpGet]
[Route("GetAllWorkshops")]
public IList<Model> GetAllWorkshops()
{
...
}
}
Very clear and concise.
I'm currently building an API using Web API 2.2
I have the RESTful part of it working but now I need one non-RESTful controller:
public class PremisesController : ApiController
{
private PremiseService _service;
public PremisesController()
{
_service = new PremiseService();
}
[HttpGet]
public IHttpActionResult Premise(string id)
{
id = id.Replace(" ", String.Empty).ToUpper();
List<Premise> premises = _service.GetPremisesForPostcode(id);
return Ok(premises);
}
[HttpGet]
public IHttpActionResult Building(string id)
{
double premise = Convert.ToDouble(id);
Building building = _service.GetBuildingsForPremise(premise);
return Ok(building);
}
}
The routing config is as follows:
config.MapHttpAttributeRoutes();
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = RouteParameter.Optional }
);
config.Routes.MapHttpRoute(
name: "ActionApi",
routeTemplate: "api/{controller}/{action}/{id}",
defaults: new { id = RouteParameter.Optional }
);
Im getting the error that it can't distinguish between the two methods when I initiate a GET action:
Multiple actions were found that match the request
So my question is Do I need to specify the Route attribute on top of each method and if yes, why? Doesn't the second route (ActionApi) deals with that situation?
EDIT:
I just tested you're code and it works the way it is... maybe just it is unclear.
/api/Premises/Premise/8 --> will take you to your first action
/api/Premises/Building/8 --> will take you to your second action
/api/Premises/8 --> will cause error because the routing will go to the first rule api/{controller}/{id} with a GET request, then he can't distinguish which of the actions you want because they both match the first route: (api/Premises/{id})
You could also use the RoutePrefix attribute on your controller.
[RoutePrefix("api/premises")]
public class PremisesController : ApiController
That combined with the route attribute would mean you shouldn't get multiple actions with the same route
The APIs call to a testdata controller is only working for REST calls with Ids.
I have a custom routing showed bellow and every time I call http://localhost:56762/api/web/testdata/ nothing happens(I set a breakpoint on IEnumerable<TestData> Get(), and it is not called). Howver, if I call http://localhost:56762/api/web/testdata/1 I have the get method with Id working.
config.Routes.MapHttpRoute(
name: "TestData",
routeTemplate: "api/web/testdata/{id}",
defaults: new {controller="testdata", id = RouteParameter.Optional }
);
// GET api/web/testdata/5
public string Get(int id)
{
return "TEST DATA!";
}
public IEnumerable<TestData> Get()
{
...
return listTestData;
}
You need a bracket for testdata in routeTemplate, see below:
config.Routes.MapHttpRoute(
name: "TestData",
routeTemplate: "api/web/{controller}/{id}",
defaults: new {id = RouteParameter.Optional }
);
Update
If you want to specify a specific controller for your route, see below:
config.Routes.MapHttpRoute(
name: "TestData",
routeTemplate: "api/web/{controller}/{id}",
defaults: new { controller = "testdata", id = RouteParameter.Optional }
);
Note: You need to delete or comment out the Default Api route in the Register method.
I keep getting this error when I try to have 2 "Get" methods
Multiple actions were found that match the request: webapi
I been looking around at the other similar questions about this on stack but I don't get it.
I have 2 different names and using the "HttpGet" attribute
[HttpGet]
public HttpResponseMessage Summary(MyVm vm)
{
return null;
}
[HttpGet]
public HttpResponseMessage FullDetails()
{
return null;
}
Your route map is probably something like this in WebApiConfig.cs:
routes.MapHttpRoute(
name: "API Default",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = RouteParameter.Optional });
But in order to have multiple actions with the same http method you need to provide webapi with more information via the route like so:
routes.MapHttpRoute(
name: "API Default",
routeTemplate: "api/{controller}/{action}/{id}",
defaults: new { id = RouteParameter.Optional });
Notice that the routeTemplate now includes an action. Lots more info here: http://www.asp.net/web-api/overview/web-api-routing-and-actions/routing-in-aspnet-web-api
Update:
Alright, now that I think I understand what you are after here is another take at this:
Perhaps you don't need the action url parameter and should describe the contents that you are after in another way. Since you are saying that the methods are returning data from the same entity then just let the parameters do the describing for you.
For example your two methods could be turned into:
public HttpResponseMessage Get()
{
return null;
}
public HttpResponseMessage Get(MyVm vm)
{
return null;
}
What kind of data are you passing in the MyVm object? If you are able to just pass variables through the URI, I would suggest going that route. Otherwise, you'll need to send the object in the body of the request and that isn't very HTTP of you when doing a GET (it works though, just use [FromBody] infront of MyVm).
Hopefully this illustrates that you can have multiple GET methods in a single controller without using the action name or even the [HttpGet] attribute.
Update as of Web API 2.
With this API config in your WebApiConfig.cs file:
public static void Register(HttpConfiguration config)
{
//// Web API routes
config.MapHttpAttributeRoutes(); //Don't miss this
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = System.Web.Http.RouteParameter.Optional }
);
}
You can route our controller like this:
[Route("api/ControllerName/Summary")]
[HttpGet]
public HttpResponseMessage Summary(MyVm vm)
{
return null;
}
[Route("api/ControllerName/FullDetails")]
[HttpGet]
public HttpResponseMessage FullDetails()
{
return null;
}
Where ControllerName is the name of your controller (without "controller"). This will allow you to get each action with the route detailed above.
For further reading: http://www.asp.net/web-api/overview/web-api-routing-and-actions/attribute-routing-in-web-api-2
In Web API (by default) methods are chosen based on a combination of HTTP method and route values.
MyVm looks like a complex object, read by formatter from the body so you have two identical methods in terms of route data (since neither of them has any parameters from the route) - which makes it impossible for the dispatcher (IHttpActionSelector) to match the appropriate one.
You need to differ them by either querystring or route parameter to resolve ambiguity.
After a lot of searching the web and trying to find the most suitable form for routing map
if have found the following
config.Routes.MapHttpRoute("DefaultApiWithId", "Api/{controller}/{id}", new { id =RouteParameter.Optional }, new { id = #"\d+" });
config.Routes.MapHttpRoute("DefaultApiWithAction", "Api/{controller}/{action}");
These mapping applying to both action name mapping and basic http convention (GET,POST,PUT,DELETE)
This is the answer for everyone who knows everything is correct and has checked 50 times.....
Make sure you are not repeatedly looking at RouteConfig.cs.
The file you want to edit is named WebApiConfig.cs
Also, it should probably look exactly like this:
using System.Web.Http;
namespace My.Epic.Website
{
public static class WebApiConfig
{
public static void Register(HttpConfiguration config)
{
config.MapHttpAttributeRoutes();
// api/Country/WithStates
config.Routes.MapHttpRoute(
name: "ControllerAndActionOnly",
routeTemplate: "api/{controller}/{action}",
defaults: new { },
constraints: new { action = #"^[a-zA-Z]+([\s][a-zA-Z]+)*$" });
config.Routes.MapHttpRoute(
name: "DefaultActionApi",
routeTemplate: "api/{controller}/{action}/{id}",
defaults: new { id = RouteParameter.Optional }
);
}
}
}
I could have saved myself about 3 hours.
It might be possible that your webmethods are being resolved to the same url. Have a look at the following link :-
http://www.asp.net/web-api/overview/web-api-routing-and-actions/routing-in-aspnet-web-api
So, you might need to add your methodname to your routing table.
Without using actions the options would be:
move one of the methods to a different controller, so that they don't clash.
use just one method that takes the param, and if it's null call the other method from your code.
This solution worked for me.
Please place Route2 first in WebApiConfig. Also Add HttpGet and HttpPost before each method and include controller name and method name in the url.
WebApiConfig =>
config.Routes.MapHttpRoute(
name: "MapByAction",
routeTemplate: "api/{controller}/{action}/{id}", defaults: new { id = RouteParameter.Optional });
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = RouteParameter.Optional });
Controller =>
public class ValuesController : ApiController
{
[HttpPost]
public string GetCustomer([FromBody] RequestModel req)
{
return "Customer";
}
[HttpPost]
public string GetCustomerList([FromBody] RequestModel req)
{
return "Customer List";
}
}
Url =>
http://localhost:7050/api/Values/GetCustomer
http://localhost:7050/api/Values/GetCustomerList
I found that that when I have two Get methods, one parameterless and one with a complex type as a parameter that I got the same error. I solved this by adding a dummy parameter of type int, named Id, as my first parameter, followed by my complex type parameter. I then added the complex type parameter to the route template. The following worked for me.
First get:
public IEnumerable<SearchItem> Get()
{
...
}
Second get:
public IEnumerable<SearchItem> Get(int id, [FromUri] List<string> layers)
{
...
}
WebApiConfig:
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}/{layers}",
defaults: new { id = RouteParameter.Optional, layers RouteParameter.Optional }
);
It is possible due to using MVC controller instead of Web API controller.
Check the namespace in Web API controller it should be as following
using System.Net;
using System.Net.Http;
using System.Web.Http;
If the namespace are as following then it is give above error in web api controller method calling
using System.Web;
using System.Web.Mvc;
Please check you have two methods which has the different name and same parameters.
If so please delete any of the method and try.
I've stumbled upon this problem while trying to augment my WebAPI controllers with extra actions.
Assume you would have
public IEnumerable<string> Get()
{
return this.Repository.GetAll();
}
[HttpGet]
public void ReSeed()
{
// Your custom action here
}
There are now two methods that satisfy the request for /api/controller which triggers the problem described by TS.
I didn't want to add "dummy" parameters to my additional actions so I looked into default actions and came up with:
[ActionName("builtin")]
public IEnumerable<string> Get()
{
return this.Repository.GetAll();
}
for the first method in combination with the "dual" route binding:
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{id}",
defaults: new { action = "builtin", id = RouteParameter.Optional },
constraints: new { id = #"\d+" });
config.Routes.MapHttpRoute(
name: "CustomActionApi",
routeTemplate: "api/{controller}/{action}");
Note that even though there is no "action" parameter in the first route template apparently you can still configure a default action allowing us to separate the routing of the "normal" WebAPI calls and the calls to the extra action.
In my Case Everything was right
1) Web Config was configured properly
2) Route prefix and Route attributes were proper
Still i was getting the error. In my Case "Route" attribute (by pressing F12) was point to System.Web.MVc but not System.Web.Http which caused the issue.
You can add [Route("api/[controller]/[action]")] to your controller class.
[Route("api/[controller]/[action]")]
[ApiController]
public class MySuperController : ControllerBase
{
...
}
I know it is an old question, but sometimes, when you use service resources like from AngularJS to connect to WebAPI, make sure you are using the correct route, other wise this error happens.
Make sure you do NOT decorate your Controller methods for the default GET|PUT|POST|DELETE actions with [HttpPost/Put/Get/Delete] attribute. I had added this attibute to my vanilla Post controller action and it caused a 404.
Hope this helps someone as it can be very frustrating and bring progress to a halt.
For example => TestController
[HttpGet]
public string TestMethod(int arg0)
{
return "";
}
[HttpGet]
public string TestMethod2(string arg0)
{
return "";
}
[HttpGet]
public string TestMethod3(int arg0,string arg1)
{
return "";
}
If you can only change WebApiConfig.cs file.
config.Routes.MapHttpRoute(
name: "DefaultApi",
routeTemplate: "api/{controller}/{action}/",
defaults: null
);
Thats it :)
And Result :
Have you tried like:
[HttpGet("Summary")]
public HttpResponseMessage Summary(MyVm vm)
{
return null;
}
[HttpGet("FullDetails")]
public HttpResponseMessage FullDetails()
{
return null;
}
I have a Web API controller with the following actions:
[HttpPut]
public string Put(int id, JObject data)
[HttpPut, ActionName("Lock")]
public bool Lock(int id)
[HttpPut, ActionName("Unlock")]
public bool Unlock(int id)
And the following routes mapped:
routes.MapHttpRoute(
name: "Api",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = RouteParameter.Optional }
);
routes.MapHttpRoute(
name: "ApiAction",
routeTemplate: "api/{controller}/{action}/{id}"
);
When I make the following requests everything works as expected:
PUT /api/items/Lock/5
PUT /api/items/Unlock/5
But when I attempt to make a request to:
PUT /api/items/5
I get the following exception:
Multiple actions were found that match the request:
Put(int id, JObject data)
Lock(int id)
Unlock(int id)
I tried adding an empty action name to the default route but that did not help:
[HttpPut, ActionName("")]
public string Put(int id, JObject data)
Any ideas how I can combine default RESTful routing with custom action names?
EDIT: The routing mechanism is not confused by the choice of controller. It is confused by the choice of action on a single controller. What I need is to match the default action when no action is specified. Hope that clarifies things.
This is an expected error from the default action selector which is the ApiControllerActionSelector. You basically have three action methods which correspond to HTTP Put verb. Also keep in mind that the default action selector considers simple action parameter types which are all primitive .NET types, well-known simple types (System.String, System.DateTime, System.Decimal, System.Guid, System.DateTimeOffset, System.TimeSpan) and underlying simple types (e.g: Nullable<System.Int32>).
As a solution to your problem I would create two controllers for those as below:
public class FooController : ApiController {
public string Put(int id, JObject data)
}
public class FooRPCController : ApiController {
[HttpPut]
public bool Lock(int id)
[HttpPut]
public bool Unlock(int id)
}
the routes would look like as below:
routes.MapHttpRoute(
name: "ApiAction",
routeTemplate: "api/Foo/{action}/{id}",
defaults: new { controller = "FooRPC" }
);
routes.MapHttpRoute(
name: "Api",
routeTemplate: "api/Foo/{id}",
defaults: new { id = RouteParameter.Optional, controller = "Foo" }
);
On the other hand (not completely related to your topic), I have three blog posts on action selection, especially with complex type parameters. I encourage you to check them out as they may give you a few more perspective:
Complex Type Action Parameters and Controller Action Selection with ASP.NET Web API
Complex Type Action Parameters with ComplexTypeAwareActionSelector in ASP.NET Web API - Part 1
Complex Type Action Parameters with ComplexTypeAwareActionSelector in ASP.NET Web API - Part 2
With the help of Giscard Biamby, I found this answer which pointed me in the right direction. Eventually, to solve this specific problem, I did it this way:
routes.MapHttpRoute(
name: "ApiPut",
routeTemplate: "api/{controller}/{id}",
defaults: new { action = "Put" },
constraints: new { httpMethod = new HttpMethodConstraint("Put") }
);
Thanks #GiscardBiamby
Firstly, remove [HttpPut, ActionName("")] and then modify your route to this
config.Routes.MapHttpRoute(
name: "Api",
routeTemplate: "api/{controller}/{id}",
defaults: new { id = RouteParameter.Optional },
constraints: new { id = #"^[0-9]+$" }
);