We have a requirement to display bank routing/account data that is masked with asterisks, except for the last 4 numbers. It seemed simple enough until I found this in unit testing:
string.Format("{0:****1234}",61101234)
is properly displayed as: "****1234"
but
string.Format("{0:****0052}",16000052)
is incorrectly displayed (due to the zeros??): "****1600005252""
If you use the following in C# it works correctly, but I am unable to use this because DevExpress automatically wraps it with "{0: ... }" when you set the displayformat without the curly brackets:
string.Format("****0052",16000052)
Can anyone think of a way to get this format to work properly inside curly brackets (with the full 8 digit number passed in)?
UPDATE: The string.format above is only a way of testing the problem I am trying to solve. It is not the finished code. I have to pass to DevExpress a string format inside braces in order for the routing number to be formatted correctly.
It's a shame that you haven't included the code which is building the format string. It's very odd to have the format string depend on the data in the way that it looks like you have.
I would not try to do this in a format string; instead, I'd write a method to convert the credit card number into an "obscured" string form, quite possibly just using Substring and string concatenation. For example:
public static string ObscureFirstFourCharacters(string input)
{
// TODO: Argument validation
return "****" + input.Substring(4);
}
(It's not clear what the data type of your credit card number is. If it's a numeric type and you need to convert it to a string first, you need to be careful to end up with a fixed-size string, left-padded with zeroes.)
I think you are looking for something like this:
string.Format("{0:****0000}", 16000052);
But I have not seen that with the * inline like that. Without knowing better I probably would have done:
string.Format("{0}{1}", "****", str.Substring(str.Length-4, 4);
Or even dropping the format call if I knew the length.
These approaches are worthwhile to look through: Mask out part first 12 characters of string with *?
As you are alluding to in the comments, this should also work:
string.Format("{0:****####}", 16000052);
The difference is using the 0's will display a zero if no digit is present, # will not. Should be moot in your situation.
If for some reason you want to print the literal zeros, use this:
string.Format("{0:****\0\052}", 16000052);
But note that this is not doing anything with your input at all.
Related
I tried to figure out the basics of these numeric string formatters. So I think I understand the basics but there is one thing I'm not sure about
So, for example
#,##0.00
It turns out that it produces identical results as
#,#0.00
or
#,0.00
#,#########0.00
So my question is, why are people using the #,## so often (I see it a lot when googling)
Maybe I missed something.
You can try it out yourself here and put the following inside that main function
double value = 1234.67890;
Console.WriteLine(value.ToString("#,0.00"));
Console.WriteLine(value.ToString("#,#0.00"));
Console.WriteLine(value.ToString("#,##0.00"));
Console.WriteLine(value.ToString("#,########0.00"));
Probably because Microsoft uses the same format specifier in their documentation, including the page you linked. It's not too hard to figure out why; #,##0.00 more clearly states the programmer's intent: three-digit groups separated by commas.
What happens?
The following function is called:
public string ToString(string? format)
{
return Number.FormatDouble(m_value, format, NumberFormatInfo.CurrentInfo);
}
It is important to realize that the format is used to format the string, but your formats happen to give the same result.
Examples:
value.ToString("#,#") // 1,235
value.ToString("0,0") // 1,235
value.ToString("#") // 1235
value.ToString("0") // 1235
value.ToString("#.#")) // 1234.7
value.ToString("#.##") // 1234.68
value.ToString("#.###") // 1234.679
value.ToString("#.#####") // 1234.6789
value.ToString("#.######") // = value.ToString("#.#######") = 1234.6789
We see that
it doesn't matter whether you put #, 0, or any other digit for that matter
One occurrence means: any arbitrary large number
double value = 123467890;
Console.WriteLine(value.ToString("#")); // Prints the full number
, and . however, are treated different for double
After a dot or comma, it will only show the amount of character that are provided (or less: as for #.######).
At this point it's clear that it has to do with the programmer's intent. If you want to display the number as 1,234.68 or 1234.67890, you would format it as
"#,###.##" or "#,#.##" // 1,234.68
"####.#####" or "#.#####" // 1234.67890
I have the format string ######.00 used for formatting decimals in C#. I need to change it so that it omits the period but keeps the digits following the period. Can I accomplish this just by changing the format? I've searched, but haven't been able to find a solution online.
I found this answer to a very similar question, but it involves multiplying the decimal by 100 before formatting it. I'm not able to manipulate the number going in, nor the resulting string because I don't have access to them. This is because we're using a function from a third-party library that fetches the number from elsewhere and displays it formatted to the UI. I can only provide it with a format string. (If manipulating the number or resulting string is the only way to get it in the format we can probably do it, it would just take a good deal of refactoring, so I wanted to see if there's a simpler solution first. Hence the constraints.)
Just as an example of the output I'm looking for, consider the following code:
var myFormat = "{0:######.00}";
Console.WriteLine(string.Format(myFormat, 1234.1234));
Console.WriteLine(string.Format(myFormat, 5));
The code above currently outputs 1234.12 and 5.00, but I would like it to output 123412 and 500 just by changing myFormat. Is there a way to do this?
If only the format string is what you can change, there's probably no way to remove the dot.
However, you can implement your own Formatter, as MSDN's example.
string.Format(new CustomerFormatter(), "{0}", 1234.1234)
Here is my prob, I wanted String.Format() function should take 4 objects and format string. But it throws "Input string not in a correct format error".
Here is my code,
string jsonData = string.Format("{{\"sectionTitle\":\"{0}\",\"strPushMsg\":\"{1}\",\"Language\":\"{2}\",}\",\"articleid\":\"{3}\"}}", urlsectiontitle, formatHeadline, Language, articleid);
\"{2}\",}\"
Looks like you need to escape that closing brace by doubling it:
string.Format("{{\"sectionTitle\":\"{0}\",\"strPushMsg\":\"{1}\",\"Language\":\"{2}\",}}\",\"articleid\":\"{3}\"}}", urlsectiontitle, formatHeadline, Language, articleid);
It appears you are creating JSON. This can use single quotes (which would avoid all the escaping), but even better use a tool like JSON.Net designed to create JSON. While your (partial) structure here is quite small (the unmatched } shows this is only partial), and the JSON gets bigger it is much easier to use a tool to get it right.
ok so I am building a program in WPF format.
as you know wpf's inputs are usually string, to turn those into double first I need to validate if those string fit and then to proceed and convert them.
the problem is in the validation, I have done the part in the validation that is checking if the string.IsNullOrEmpty but the thing I could not do is validate if the answer is completely not convertable... let me show an example because some strings that are not completely numeric are still should be accepted for example:
"sadasdaasd" - not accepted (obviously)
"8945a4554" - not accepted (there is an 'a' in the middle)
"3519" - accepted
"12.55" - accepted
"-3/4" - accepted and the value should be converted to double as (-3) divided by (4). so '/' is accepted and it splits the string by 2 and then converts it to double as first part/ second part.
I have been trying to do this validation all day and still have not succeeded, I have tried searching the web for some input validation, some said that I need to use double.TryParse(string, out double) but this function does not work with the '/' split that i wanted. so please help me!!!
I would start by parsing your string via regex (q: is "-3*4" acceptable as -3 times 4?). Basically you're looking for a match on a regex which is kind of like this (this works on -3/4, you'd want to test it further and modify if multiplication is allowed): -?\d+[/]\d+
If you find that match, parse out your string with string.Split('/') which will give you an array of strings. TryParse each of those and do the math.
If there is not a match, use TryParse (as recommended previously). That will either succeed (3519, 12.55 in your examples) or fail (sadasdaasd, 8945a4554 in your examples).
Note: you could also use string.Contains('/'), but then you have to check to see if it holds more than one slash (unless such a thing is allowed- in which case you'll need to revisit that regex).
How would I accomplish displaying a line as the one below in a console window by writing it into a variable during design time then just calling Console.WriteLine(sDescription) to display it?
Options:
-t Description of -t argument.
-b Description of -b argument.
If I understand your question right, what you need is the # sign in front of your string. This will make the compiler take in your string literally (including newlines etc)
In your case I would write the following:
String sDescription =
#"Options:
-t Description of -t argument.";
So far for your question (I hope), but I would suggest to just use several WriteLines.
The performance loss is next to nothing and it just is more adaptable.
You could work with a format string so you would go for this:
string formatString = "{0:10} {1}";
Console.WriteLine("Options:");
Console.WriteLine(formatString, "-t", "Description of -t argument.");
Console.WriteLine(formatString, "-b", "Description of -b argument.");
the formatstring makes sure your lines are formatted nicely without putting spaces manually and makes sure that if you ever want to make the format different you just need to do it in one place.
Console.Write("Options:\n\tSomething\t\tElse");
produces
Options:
Something Else
\n for next line, \t for tab, for more professional layouts try the field-width setting with format specifiers.
http://msdn.microsoft.com/en-us/library/txafckwd.aspx
If this is a /? screen, I tend to throw the text into a .txt file that I embed via a resx file. Then I just edit the txt file. This then gets exposed as a string property on the generated resx class.
If needed, I embed standard string.Format symbols into my txt for replacement.
Personally I'd normally just write three Console.WriteLine calls. I know that gives extra fluff, but it lines the text up appropriately and it guarantees that it'll use the right line terminator for whatever platform I'm running on. An alternative would be to use a verbatim string literal, but that will "fix" the line terminator at compile-time.
I know C# is mostly used on windows machines, but please, please, please try to write your code as platform neutral. Not all platforms have the same end of line character. To properly retrieve the end of line character for the currently executing platform you should use:
System.Environment.NewLine
Maybe I'm just anal because I am a former java programmer who ran apps on many platforms, but you never know what the platform of the future is.
The "best" answer depends on where the information you're displaying comes from.
If you want to hard code it, using an "#" string is very effective, though you'll find that getting it to display right plays merry hell with your code formatting.
For a more substantial piece of text (more than a couple of lines), embedding a text resources is good.
But, if you need to construct the string on the fly, say by looping over the commandline parameters supported by your application, then you should investigate both StringBuilder and Format Strings.
StringBuilder has methods like AppendFormat() that accept format strings, making it easy to build up lines of format.
Format Strings make it easy to combine multiple items together. Note that Format strings may be used to format things to a specific width.
To quote the MSDN page linked above:
Format Item Syntax
Each format item takes the following
form and consists of the following
components:
{index[,alignment][:formatString]}
The matching braces ("{" and "}") are
required.
Index Component
The mandatory index component, also
called a parameter specifier, is a
number starting from 0 that identifies
a corresponding item in the list of
objects ...
Alignment Component
The optional alignment component is a
signed integer indicating the
preferred formatted field width. If
the value of alignment is less than
the length of the formatted string,
alignment is ignored and the length of
the formatted string is used as the
field width. The formatted data in
the field is right-aligned if
alignment is positive and left-aligned
if alignment is negative. If padding
is necessary, white space is used. The
comma is required if alignment is
specified.
Format String Component
The optional formatString component is
a format string that is appropriate
for the type of object being formatted
...