I'm running SAS batch files daily but since SAS files are not compiled, they are available for viewing by simply opening the files with Notepad.
I was wondering if I could run a .SAS file from within a C# project, hence hiding the SAS code.
Thanks in advance for your help !
If you want to hide your SAS code, there are a few ways to do it without something quite so complicated. This topic is well covered here:
https://communities.sas.com/thread/34604?start=0&tstart=0
Stored programs and compiled macros are two very good solutions here; they're fairly easy to implement and allow you to deploy your code (just like a C# project or whatever) with a minimum of extra work.
Related
I'm currently searching for a way to make it possible to deploy and update a C# .NET application over SFTP. Background is that most of my users do not have admin rights, internet access rights or common file structures/group policies. The best I could actually get was the ability to also use the SFTP-infrastructure the application already uses for data transfers.
So I tried using Visual Studio publish, which can deploy the application initially, however it does not support the update mechanisms (it only supports URLs and File Paths). A manual update/deployment process is out of the question, however, purely through the sheer size of the userbase (1000+ users).
I then had a look at wyBuild, a third-party build-tool that can actually use sftp to upload Updates. It can not, however, download them via sftp.
So I'm reaching somewhat the end of my rope here. Writing an updater myself seems like a large time investment, but I could not find any other solution. How would this problem be solvable? Thanks for any help in advance.
Oh, and before somebody flags for "asking for a tutorial", I tried hard to stay within the guidelines stackoverflow provides here
I work for an IT company where we all carry around flash drives that have our most used programs on them.In my spare time I am hoping to create a "main menu" item that is kind of a fun and convenient way to access these files. I am working on creating this using Visual Studio 2013 and using visual C# windows forms. I have come across a snag however that I can't seem to find a workaround for. I am by no means fluent in C#, but I need to have a button on the windows form open a file without specifying what drive it comes from. I understand that I have to specify a path, but as these will be stored on the flash drives of myself and my coworkers I cannot foresee that the path will always begin with E:. Depending on what USB slot the drive is plugged into it could be N: or F: or the like. I have provided an example below:
Using what I currently know I am opening files using this line of code:
System.Diagnostics.Process.Start("C:/Users/Myname/Desktop/Asmodeus/Anti-Virus/Anti-Virus Installers/avast_free_antivirus_setup.exe");
Is there any way possible I can have the file open simply from
System.Diagnostics.Process.Start("Asmodeus/Anti-Virus/Anti-Virus Installers/avast_free_antivirus_setup.exe");
or something of that nature?
Thanks in advance.
There must have been some mis-communication when I asked my question previously. what I am looking to do is open an executable file via a button click on the windows form using a relative path. I am not able to specify the absolute path because the application will be run from a flash drive and therefore will change depending on what USB slot it is currently inserted into.
What I am hoping to accomplish is insert a line of code that will allow me to open an executable file that is located in the \bin\debug folder along with the application itself. I have a picture for clarification but apparently do not have enough reputation to post it. Thank you and sorry for the earlier confusion.
Usually you can just use Environment.GetFolderPath (MSDN) to give you what you need. It doesn't do absolutely everything, but if you need Desktop and the like, that is plenty.
Depending on the target version of .Net, the SpecialFolders exposed are not all there. It may turn out that you need more than they provide, but in your case it doesn't sound like it.
If there is more you need that is not covered in the default, check out this project. I'm sure there are others like it, but it does a little more than the default BCL version, using the API directly. It is at least something to read and learn (and translate from vb.. use an online translator, very quick). I haven't looked at it, but it seems like you are learning this c#/.net thingy, so it might be helpful
This article is about accessing Windows special folders.
These folders include your “Favorites”, “Cookies”, system libraries and the like.
Here is code, including a large number of constant definitions, plus documentation,
allowing access to and creation of these folders.
So, I want to create a simple launcher for a game that I'm making for Windows. I want to write it on Visual Studio so it can do the following:
Launch the game wherever the .exe file is. (either via registry key or by the user selecting the destination)
Auto-install all the needed dependences for the game if they are missing or provide a link to install them.
Verify intergrity of the files.
Auto download the latest patch or take the user to the patch download site (optional).
In addition of these, I need some help on the following:
Assuming that I can set it up to download the patch, how can I deliver it? I'm not sure that the program can download files from SkyDrive can it?
How do I set it up as a 32-bit program? I have a 64-bit system here.
Is it possible to write a Metro version of the launcher using the same code?
Please note that the game will be in a "installable format". I'll be using Install Creator for this.
Thanks for any help in advance.
I've written a similar software before for a game, that did almost the same things as you described. Given that you have not shown any code, I'll answer the 3 questions in a general, basic way.
1.) Depends on what you mean by patch. An installer that supposed to replace or extend existing files, delete old files, deploy new ones? In that case it's up to the installer to manage it. If a patch simply downloads a file and puts it in the right place you can download it from either Skydrive (DriveOne) or any other place. Check out the API and the examples here.
2.) I'm not sure I understand this question, but I think you just want to compile your binary to 32bit in visual studio and that's it.
3.) Yes.
I'm using SharpDevelop to create a WinForm-based C# application. After studying my target audience, I believe it is in my best interest to use a no-install application. While creating my HelloWorld! program to get to know SharpDevelop (I have just switched from VBExpress), I found that the file it outputs is a .exe without any setup process. However, I'm worried that some of the features I want won't be compatible with this format. I don't want to get deep into this app and find out users are going to have to keep the program in the same directory as 548 other random files.
Here are the features I'm concerned about:
+Save user data (XML) in AppData.
+Access internet feeds (XML and/or JSON).
+Minimize to tray on close.
Also, are there any common pitfalls with this type of deployment method?
EDIT: I understand the enduser will need the .NET framwork for C# programs. I am not worried about this.
It will execute with the same privileges.
The only thing you will want to look out for is making sure the end user has the correct .NET framework installed since you don't have an installer to do that for you. But now reading the end of your message it appears you already have that covered.
If you are concerned about the deployment technique you can test it on a non-dev machine, though the results should be the exact same.
I need to create a resource file for a .net project (by hand) and compile it using the ResGen.exe tool provided by the .NET framework. I can't find any documentation for this. I need to write the resource file by hand because I'm in a situation where I don't want to download/buy extra tools (like VS) to generate this resource file, and also I feel more productive through the command-line (helps me understand how things really work).
So I need to write a resource file by hand to store an ICON in the executable and use it from within my program. I would also like to use this icon to represent my executable in Windows Explorer.
Any references would be great!
Visual C# Express Edition will do what you want for free. If nothing else you can download that, create the resource file and then use that as a subject for your admirable curiosity about 'how it really works'. This may also save you some time in manual experimentation to get it right the first time around.
These 2 links in conjunction provide information on using that tool to create and embed an icon file, it seems specific to C#. Of course i'm guessing at your full intention, let me know if this points you in the proper direction.
http://www.xtremedotnettalk.com/showthread.php?t=75449
specifically there is a post which states;
I think you should first create a *.resources-File from the Icon with the tool named "Resgen.exe"...
resgen App.ico App.ico.resources
the next step would be compiling...
csc /t:winexe /out:Keygen.exe /res:App.ico.resources /r:Crypto.dll /win32icon:App.ico Keygen.cs AssemblyInfo.cs
I'm sure you were here already.
http://msdn.microsoft.com/en-us/library/ccec7sz1(VS.80).aspx
You should check this link:
http://msdn.microsoft.com/en-us/library/ekyft91f.aspx
It explains what formatter is used and gives some code samples to generate one from code. You could then write a small wrapper app that you can call from the command line. No downloads needed!