I want to trim a MP4 video in a Windows Phone 8 Application.
Say when saving a video, I only want to save the last two minutes.
I have tried converting the video stream into a byte array and altering it. Since the mp4 format has headers and lot of other metadata it is not easy to achieve this fiddling with the byte array of the stream.
If it is a Windows Store app I can use MediaTranscode class in the Windows.Media.Transcoding API to achieve this like in the article below.
Trim Video Windows Store App Example
I pretty much want to do something similar in windows phone.
Is there a similar API I can use in WP?
I also have been looking into Microsoft Media Foundation to achieve this? I am no C++ expert and wanting achieve this in C#.
Any help or direction would be much appreciated.
Thanks
C# in general is not setup to do movie editing. It's older sibling c++ is where this done. I know that's not the answer you want to hear but sometimes that's the only reality there is. I was going to offer a hack to make it happen but after digging through the MSDN libraries I don't even see a worthy hack for this.
Find a C++ example and work from there. It will be a little headache but you are much better off than attempting to make C# bend beyond its elasticity point.
Here is a similar thread expressing your concerns.
http://forums.wpcentral.com/windows-phone-apps/204490-video-editing-apps.html
They have made the point that there isn't a single video editing tool on the entire market.
With how long the market has been around I would assume this is because it's not a capability in C#. Which happens to be 99% of the developers working on windows phone right now.
Related
I'm developping a SmartDevice application (Pocket PC 2003 template) in C# for a device with Windows Mobile 6.1. I need to use the camera of this device (photos, video); to do this work i tried using the CameraCaptureDialog class but it does not work for Pocket PC applications.
So, I documented on the internet and found that I probably refer to DirectShow API, but the problem is that I do not know where to start because I can't found a working/correct example.
My questions:
Is this the right way? Are there alternatives?
Where I can find a very good example that shows how to do this work?
You may try directshowbetcf: http://alexmogurenko.com/blog/directshownetcf/ if you really want to go with DirectShow and NetCF.
There's plenty of examples of directshow on the web. There is a site dedicated to converting the API over to C# which makes it a lot easier, maybe this was it http://directshownet.sourceforge.net/about.html. I struggled with DirectShow until I read the book "programming directshow" from microsoft press. About a third of that way through that book it all seemed incredibly easy and I was able to complete what I wanted. In the end it's a lot like referencing any library and using the classes from within that library. The added difficulty is that you need to add wrappers because they are all COM objects but that has been done for you.
This might be useful to you to understand the DirectShow technology. Basically gives a start to DirctShow and explains some of the important points. But its C++ not C#. Hope this help
Basic Video Capture
DirectShow is the video capture API in Windows Mobile 6. There is a Video Capture Filter there and all in all things are designed pretty much the same way they are in Windows.
The problem is that however that this is a native API, and not just in Windows Mobile. To develop in C# you need some bindings and they are missing. On desktop there is DirectShow.NET, which is a missing piece, but it does not seem to fit well for CE. Yet you still need to fill this gap in Windows Mobile.
To work it around you have a few ways, the first would be to go through DirectShow.NET and update it appropriately to start working on your device, strip parts missing in mobile OS etc. This would get you a twin for DS.NET but for mobile operating system.
Another option would be to do some C++ development and implement the minimal sufficient feature set in that domain, exposing the component via COM. Then you will reference this from managed code and things will get connected together. And another obvious option would be to use a third party solution which already does one of the mentioned above.
Lately, I've been trying to setup a media center PC. I've played around with all the common media center applications like XBMC, Plex, Boxee, and WMC. But all of them have one issue or another. So I was thinking about writing my own application from scratch.
My problem is I have no experience with developing software that plays media such as videos or music. I'm also not interested in spending a huge amount of time trying to figure this out, considering all the different file formats and codecs out there. I'm really more interested in developing the database and library interface for my application and reusing someone else's control or code for actually playing the media.
One option I was thinking was to just control an existing media player externally. So for example you may browse for a video to play in my application, and then when you hit play it would fire up VideoLAN or some other popular video player.
However, I was wondering if there was an easy way to play video inside a .NET application. I'm looking for something that is capable of playing a wide variety of formats such as MKV files, and DVD ISOs. I'm more experience with WinForms, but was also thinking about using this project as an opportunity to learn WPF.
i've spent many years looking at playing video under wpf.
The short answer
There is no easy way to guarantee to be able to play a variety of formats under wpf ( mkv,dvd etc etc ) or under windows for that matter.
the long answer
If you are looking just to run this at home and not release it, install all the codecs you need and most of the formats will run via mediaelement in wpf.
Getting all the codecs to cooperate can sometimes be frustrating.
Now moving into slightly harder territory.
if you want to play DVD then you need to replace mediaelement with wpfmediakit
http://wpfmediakit.codeplex.com/
wpfmediakit gives a base library to get access to the low level directshow functionality.
There is already a code base for playing DVDs based on wpfmediakit.
Now moving onto the very hard territory.
if you want to distribute your application and have users be able to "just watch" most/all media formats means you need to be able to completely control their codecs, which generally means distributing the codecs with your package and building the directshow filter graph in code rather than let windows build it.
The easiest way is to use the existing .Net hooks to Microsoft's standard MediaPlayer:
http://msdn.microsoft.com/en-us/library/system.windows.media.mediaplayer.aspx
http://msdn.microsoft.com/en-us/library/windows/desktop/dd562851%28v=vs.85%29.aspx
was trying myself a while ago for something to play media in winforms, and found out there is vlc wrappers for .Net, dunno how good they are as i gave up, but you can try
here is one them:
http://vlcdotnet.codeplex.com/
Thanks for all the great answers. But just found out that VLC can actually be controlled through HTTP. So I think I'm just going to use that to point an instance of VLC running with the HTTP interface at whatever file I want to play.
I am new to DirectShow.
My intention was to develope a small application (C#) that handles video processing.
The main tasks i need are :
1 - Display video content from a DVD.
2 - Navigate to specific points of time in the video.
3 - Capture specific frames into still images and save them to files.
Sounded easy at first, but after reading thousands of blogs, forums and code samples i can't figure out how this can be done .
I am pretty sure these tasks have been implemented plenty of times, so if anyone has anything that can help i would be very happy to hear it.
As i am getting desperate on this issue, buying external DLLs or paying for some advice is an option.
Thanks.
Not sure if this will help, but I have a DvdPlayerElement control in my WPF MediaKit.
You must install an audio codec if you want audio as the built in one with Windows is locked down due to licensing.
perhaps you can wrap the MSVidWebDVD object, combined with some screen capture techniques [?] see also Extract frame from VOB(DVD) file
Thanks Jeremiah, I do know WPF MediaKit and tried working with it.
It is pretty cool, but does not allow all of the functionality available in DirectShow.
There are some events missing and the seeking operation does not seem to work for me.
I guess i can dig in the code and figure it out, but the time pressure won't allow it.
If you have an example of an application that accomplishes what i am looking for (display, seek, capture) i would be very happy to take a look.
Thanks again.
Does anyone know if it is possible to grab a frame/image from a video (.wmv) on position X using C# without installing DirectX and working on Windows 2008 (a webserver I would like to install as less as possible).
Or even a simple solution with directx could be nice.
Henk
What you'll actually need to look into is DirectShow, the general-purpose media (both audio and video) library for Windows. It used to be part of DirectX but several years ago it branched off and became part of the Windows (Platform) SDK. I should also point out here that it's now been deprecated since Windows Vista in favour of Media Foundation. From what I've read it's a much better library (DirectShow is hell for complex tasks), but unfortunately it's not really feasible to only target Media Foundation at the moment because of the lack of support for XP and earlier...
The best I can really do is point you to DirectShow.NET, a .NET wrapper library for DirectShow, which is rather stable and well tested at the moment. It includes various samples which should help you get going, but by no means will it be a straightforward solution. Also, I strongly recommend you take a look at this CodeProject article/sample application. It deals with both webcam video capture and video playback from files (including WMV). A bit of playing around with that, and learning how to do frame seeking/single frame capture (I think that project might even some code to do that) should get you what you need. Perhaps you'll even find the precise solution somewhere within the DirectShow.NET samples of that CodeProject app.
Of course, I would suggest an easier solution if I could here, but you're pretty much stuck with the horribleness that is DirectShow for the moment. Good luck anyway!
You should try FFmpeg.
Take a look at the Windows Media Format SDK, which is designed to give you pretty direct access to the frames inside a WMV (/WMA/ASF) file.
http://msdn.microsoft.com/en-us/library/dd757738(VS.85).aspx
In particular, you're interested in the synchronous API for reading these files (IWMSyncReader is the interface name). There are some pretty decent samples in the WMFSDK; I believe the most interesting one for you here will be WMSyncReader, which will show you how to dig through a WMV file and get frames, starting at position X.
Does XNA provide a means of audio input from the line-in? I looked at the MSDNA website but can't find anything on audio input. If it is indeed possible, a snippet of code or a tutorial website would be great.
Edit:
I need to do buffered reads from the audio-line in. I'm not so much interested in the implementation but rather if it has low latency.
Also development will be implemented into a PC only game.
I think all sound files need to be compiled by XACT before they can be used in XNA.
So either you get hold of DirectSound and look at the sample in:
\Samples\Managed\DirectSound\CaptureSound
...or you could interop with winmm.dll. This guy has made a small example of how to do it:
http://www.codeproject.com/KB/audio-video/cswavrec.aspx
And this guy writes some more about enumerating all sound recording devices:
http://www.codeproject.com/KB/cs/Enum_Recording_Devices.aspx
Hope it helps!
Edit:
I'm not sure what you want to do with your audio stream so this tutorial might be of interest as well:
http://nyxtom.vox.com/library/post/recording-audio-in-c.html
Edit 2:
What he said (in the comment)
|
|
V
If you're looking at doing a Windows only project, you could certainly capture the audio coming in with code from outside the XNA framework and play it back with the same. Because of how the XNA content manager works, you wouldn't be able to use the regular playback methods because the content manager translates everything into .xnb files at compile time and reads them from there. Nothing keeping you from playing using standard windows API calls though. You wouldn't really have an XNA project at that point, but I don't suppose the distinction is all that important since you're not looking to be compatible with the other platforms anyway.
To answer your question, no, you can't access audio line-in through the XNA APIs. You'd have to look at some other library such as Port Audio that would give you access to features like that. But then you'd be restricted to running on windows (ie. no xbox or zune).
disclaimer: not sure if port audio specifically has this functionality as I just found it quickly via google. Was just trying to illustrate that you'd have to use some other API.