is it possible to overwrite data in cells with OleDb in C# with a specific row range?
I only found adding data to first empty cells in specific column like
string sql = "Insert into [Tabelle1$] (testA, testB) values(6,7)";
If its not possible what assembly is fast for this task ....Microsoft.Office.Interop is horrible slow.
Thanks for any tip
I have a program (actually SSIS script task, but I don't suppose that matters) that creates an OLE DB connection to an Excel workbook, and reads the cell values in each worksheet, storing them in a SQL Server table.
Each worksheet has several sections of rows, each section being for a separate product. The first two rows of each product section are a quarter row, and a year row. Here is a screen shot:
I use an OleDbDataReader with a "Select *" command to read the data in each sheet into a DataTable. I have a column called "YearQuarter" in my SQL database, where I store a concatenation of the year row value and the preceding quarter row value, with a hyphen between the two strings:
My code is like this:
OleDbConnection oleExcelConnection = new OleDbConnection(
"Provider=Microsoft.ACE.OLEDB.12.0;" +
"Data Source=" + strWkbkFilePath + ";" +
"Mode=Read;" +
"Extended Properties=\"Excel 8.0;HDR=No;IMEX=1\"");
oleExcelConnection.Open();
DataTable dtCurrSheet = new DataTable();
// Name of table is in strLoadTblNm.
OleDbCommand oleExcelCommand;
OleDbDataReader oleExcelReader;
oleExcelCommand = excel_conn.CreateCommand();
oleExcelCommand.CommandText = "Select * From [" + strLoadTblNm + "]";
oleExcelCommand.CommandType = CommandType.Text;
oleExcelReader = oleExcelCommand.ExecuteReader();
// Load worksheet into data table
dtSheet.Load(oleExcelReader);
oleExcelReader.Close();
Looking at the output data, I noticed that I was getting inconsistent results. Some rows would have a YearQuarter column value that would have only the Year row value in them, while others would have the cell values from both rows. For example, I'd have "2009 - Year End" followed by just "2010", with no " - 1st Qtr." appended to it.
This is because that quarter cell valued is never loaded into the data reader, as the Dataset Visualizer shows:
Notice also that, in the Dataset, the column that is missing the Quarter cell value also has other numeric values missing their formatting (no commas).
If I save the file as a .csv, all cell values are preserved.
However, I noticed that it wasn't consistent. Sometimes I'd run my package and the same row would now have the full value. So, in the above example, I'd get "2010 - 1st Qtr."
I finally realized that it was working as expected only if I happened to have the workbook open in Excel at the same time that the program was running!
Why would this make a difference? Could it be that there is a macro or something in the workbook that is executed by Excel, but not when the workbook is accessed only via an OLE DB connection? Would the fact that it had been executed in Excel then affect the data obtained by OLE DB? If that's the case, how do I get around this? The spreadsheets are provided to me. So I can't modify them.
I think you're having issues with the auto-formatting thing Excel tries to apply. With an OLEDB connection, I can't see how having the sheet open fixes your problem (obviously very strange).
Try Adding IMEX = 1 to your connection options to treat the entire sheet as text to see if this is your issue. Pulled from OLEDB connection does not read data from excel sheet Also another good post from an external site: Tips for reading Excel spreadsheets using ADO.NET
Also, you're pulling data from an excel sheet and writing it to another excel sheet... Same workbook? I have a couple more ideas for ya though depending on your situation.
This bug turns out to be a "feature", and it should come with a big warning sign.
This article (thanks, #vb4all) explains that "ADO.NET scans the first 8 rows of data, and based on that, guesses the datatype for each column. Then it attempts to coerce all data from that column to that datatype, returning NULL whenever the coercion fails!"
In other words, it is treating the worksheet as a relation table, in which all values in a given column are of the same type. Of course, worksheet data is not bound by this restriction.
This behavior can be gotten around by setting IMEX=1 in the connection string options and then modifying these registry settings:
Hkey_Local_Machine/Software/Microsoft/Jet/4.0/Engines/Excel/ImportMixedTypes
Hkey_Local_Machine/Software/Microsoft/Jet/4.0/Engines/Excel/Typ
(Note: registry keys vary depending on 32 vs. 64 bit. E.g., for 64-bit, the first one would be HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Jet\4.0\Engines\Jet 4.0).
I think this was a very risky design, inviting data transfer errors that could easily go unnoticed.
I have wrote a winform application that can open and read from a sheet of an excel file.I have used OleDbDataAdapter to read data and then set the data to a datatable. but my problem is that in this datatable the first row of data is used as the name of the columns however i want to use the base names that excel defines for each column (I mean "A B C ... AA AB ..." and so on).
Take a look at this answer Importing Excel data into C# without first row becoming column names?
It seems you need to change the connection string Extended Properties=\"Excel 8.0;HDR=No;IMEX=1;\" and make sure HDR=No is set.
Is there some simple way I am missing to import an Excel worksheet into a datatable using an OleDBConnection and change what row the header is located on? I have HDR=YES in my connection string and that works great when header is on row 1 but the header is actually going to need to be on row 3. I am using the following CommandText:
SELECT [headercol1name], [headercol2name], [headercol3name] FROM [sheetname]
You can specify a range: How can I programmatically import Excel data into an Access table?
"SELECT * FROM [Sheet1$A3:G65536]" will only return records for used range, though I did not test very carefully.
To my knowledge, neither the HDR parameter or the schema.ini file allow anything but the first row to be the header row.
http://msdn.microsoft.com/en-us/library/ms709353%28v=vs.85%29.aspx
I have a C#/.Net job that imports data from Excel and then processes it. Our client drops off the files and we process them. I don't have any control over the original file.
I use the OleDb library to fill up a dataset. The file contains some numbers like 30829300, 30071500, etc... The data type for those columns is "Text".
Those numbers are converted to scientific notation when I import the data. Is there anyway to prevent this from happening?
One workaround to this issue is to change your select statement, instead of SELECT * do this:
"SELECT Format([F1], 'General Number') From [Sheet1$]"
-or-
"SELECT Format([F1], \"#####\") From [Sheet1$]"
However, doing so will blow up if your cells contain more than 255 characters with the following error:
"Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done."
Fortunately my customer didn't care about erroring out in this scenario.
This page has a bunch of good things to try as well:
http://www.dicks-blog.com/archives/2004/06/03/external-data-mixed-data-types/
The OleDb library will, more often than not, mess up your data in an Excel spreadsheet. This is largely because it forces everything into a fixed-type column layout, guessing at the type of each column from the values in the first 8 cells in each column. If it guesses wrong, you end up with digit strings converted to scientific-notation. Blech!
To avoid this you're better off skipping the OleDb and reading the sheet directly yourself. You can do this using the COM interface of Excel (also blech!), or a third-party .NET Excel-compatible reader. SpreadsheetGear is one such library that works reasonably well, and has an interface that's very similar to Excel's COM interface.
Using this connection string:
Provider=Microsoft.ACE.OLEDB.12.0; data source={0}; Extended Properties=\"Excel 12.0;HDR=NO;IMEX=1\"
with Excel 2010 I have noticed the following. If the Excel file is open when you run the OLEDB SELECT then you get the current version of the cells, not the saved file values. Furthermore the string values returned for a long number, decimal value and date look like this:
5.0130370071e+012
4.08
36808
If the file is not open then the returned values are:
5013037007084
£4.08
Monday, October 09, 2000
If you look at the actual .XSLX file using Open XML SDK 2.0 Productivity Tool (or simply unzip the file and view the XML in notepad) you will see that Excel 2007 actually stores the raw data in scientific format.
For example 0.00001 is stored as 1.0000000000000001E-5
<x:c r="C18" s="11" xmlns:x="http://schemas.openxmlformats.org/spreadsheetml/2006/main">
<x:v>1.0000000000000001E-5</x:v>
</x:c>
Looking at the cell in Excel its displayed as 0.00001 in both the cell and the formula bar. So it not always true that OleDB is causing the issue.
I have found that the easiest way is to choose Zip format, rather than text format for columns with large 'numbers'.
Have you tried casting the value of the field to (int) or perhaps (Int64) as you are reading it?
Look up the IMEX=1 connection string option and TypeGuessRows registry setting on google.
In truth, there is no easy way round this because the reader infers column data types by looking at the first few rows (8 by default). If the rows contain all numbers then you're out of luck.
An unfortunate workaround which I've used in the past is to use the HDR=NO connection string option and set the TypeGuessRows registry setting value to 1, which forces it to read the first row as valid data to make its datatype determination, rather than a header.
It's a hack, but it works. The code reads the first row (containing the header) as text, and then sets the datatype accordingly.
Changing the registry is a pain (and not always possible) but I'd recommend restoring the original value afterwards.
If your import data doesn't have a header row, then an alternative option is to pre-process the file and insert a ' character before each of the numbers in the offending column. This causes the column data to be treated as text.
So all in all, there are a bunch of hacks to work around this, but nothing really foolproof.
I had this same problem, but was able to work around it without resorting to the Excel COM interface or 3rd party software. It involves a little processing overhead, but appears to be working for me.
First read in the data to get the column names
Then create a new DataSet with each of these columns, setting each of their DataTypes to string.
Read the data in again into this new
dataset. Voila - the scientific
notation is now gone and everything is read in as a string.
Here's some code that illustrates this, and as an added bonus, it's even StyleCopped!
public void ImportSpreadsheet(string path)
{
string extendedProperties = "Excel 12.0;HDR=YES;IMEX=1";
string connectionString = string.Format(
CultureInfo.CurrentCulture,
"Provider=Microsoft.ACE.OLEDB.12.0;Data Source={0};Extended Properties=\"{1}\"",
path,
extendedProperties);
using (OleDbConnection connection = new OleDbConnection(connectionString))
{
using (OleDbCommand command = connection.CreateCommand())
{
command.CommandText = "SELECT * FROM [Worksheet1$]";
connection.Open();
using (OleDbDataAdapter adapter = new OleDbDataAdapter(command))
using (DataSet columnDataSet = new DataSet())
using (DataSet dataSet = new DataSet())
{
columnDataSet.Locale = CultureInfo.CurrentCulture;
adapter.Fill(columnDataSet);
if (columnDataSet.Tables.Count == 1)
{
var worksheet = columnDataSet.Tables[0];
// Now that we have a valid worksheet read in, with column names, we can create a
// new DataSet with a table that has preset columns that are all of type string.
// This fixes a problem where the OLEDB provider is trying to guess the data types
// of the cells and strange data appears, such as scientific notation on some cells.
dataSet.Tables.Add("WorksheetData");
DataTable tempTable = dataSet.Tables[0];
foreach (DataColumn column in worksheet.Columns)
{
tempTable.Columns.Add(column.ColumnName, typeof(string));
}
adapter.Fill(dataSet, "WorksheetData");
if (dataSet.Tables.Count == 1)
{
worksheet = dataSet.Tables[0];
foreach (var row in worksheet.Rows)
{
// TODO: Consume some data.
}
}
}
}
}
}
}
I got one solution from somewhere else but it worked perfectly for me.
No need to make any code change, just format excel columns cells to 'General" instead of any other formatting like "number" or "text", then even Select * from [$Sheet1] or Select Column_name from [$Sheet1] will read it perfectly even with large numeric values more than 9 digits
I googled around this state..
Here are my solulition steps
For template excel file
1-format Excel coloumn as Text
2- write macro to disable error warnings for Number -> text convertion
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Application.ErrorCheckingOptions.BackgroundChecking = Ture
End Sub
Private Sub Workbook_Open()
Application.ErrorCheckingOptions.BackgroundChecking = False
End Sub
On codebehind
3- while reading data to import
try to parse incoming data to Int64 or Int32....