We Keep Coding

How can do calculations inside a string?

How do i use operands in this code? What can i do to resolve this problem? Any suggestions or links to tutorials would be appreciated.
Operator '%' cannot be applied to operands of type 'string' 'int'
int i = 0;
double[] arr1 = new double[20];
for (i = 0; i < 20; i++)
{
Console.Write("Enter a number (0=stop): ");
var year = Console.ReadLine();
if (year == "0") break;
arr1[i] = int.Parse(year);
while (year != 0)
{
if (((year % 4 == 0) && (year % 100 != 0)) || (year % 400 == 0))
{
Console.WriteLine($"{year} is a leap year.");
}
else if (year < 0)
{
Console.WriteLine($"Year must be positive!");
}
else
{
Console.WriteLine($"{year} is not a leap year.");
}`

You are close. You are already parsing the string to an int. Just use that instead of the string year when doing your calculations. Also, I'm not sure what you're trying to do with that while loop but I don't think you need it. It seems to just cause your program to go in an infinite loop because while is evaluating year but there is no opportunity to change the year value within the while loop.
void Main()
{
int i = 0;
double[] arr1 = new double[20];
for (i = 0; i < 20; i++)
{
Console.Write("Enter a number (0=stop): ");
var line = Console.ReadLine();
int numYear = int.Parse(line);
arr1[i] = numYear;
string message = "" ;
if (line != "0")
{
if (numYear < 0)
{
message = "Year must be positive!";
}
else if ((numYear % 4 == 0) && (numYear % 100 != 0)) || (numYear % 400 == 0))
{
message = $"{numYear} is a leap year.");
}
else
{
message = $"{numYear} is not a leap year.");
}
Console.WriteLine(message);
}
}
}

Find inconsistent and consecutive objects from List in C#

I'm having trouble with getting a consecutive and nonconsecutive number from list. I'm sure it's pretty simple, but i can't get it.
If consecutiveNum=2, then if result from before last and last is equal, i need to throw an exception.
If nonConsecutiveNum=4, then if from 10 pieces there are 4 with same result, i need to throw an exception.
I'm trying with nested loops and couple checks, but i didn't succeeded at all. Same is for both cases, i tried a couple solutions with System.LINQ, but again i don't get the result i need.
Thanks in advance to all of you!
int consecutiveNum = 2;
int nonConsecutiveNum = 4;
int counter = 1;
var sensInfo = new ResultInfo()
{
Product = CurrentLot.Info.Product,
Result = code
};
if (consecutiveNum > 0)
{
for (int i = ListSensors.Count + 1; i >= 0; i--)
{
if (sensInfo.Result == ListSensors[i].Result)
{
counter++;
if (counter >= consecutiveNum)
{
throw new Exception("Consecutive num");
}
}
}
}
if (nonConsecutiveNum > 0)
{
for (int i = 0; i < ListSensors.Count; i++)
{
for (int j = i + 2; j < ListSensors.Count - 2; j++)
{
if (ListSensors[i].Result == ListSensors[i+1].Result)
continue;
if (ListSensors[i].Result == ListSensors[j].Result)
{
counter++;
if (counter >= nonConsecutiveNum)
{
throw new Exception("NonConsecutive num");
}
}
}
}
}

// consecutiveNum
for (int i = ListSensors.Count - 1; i >= 0; i--)
{
if (sensInfo.Result == ListSensors[i].Result)
{
counter++;
if (counter >= consecutiveNum)
{
throw new Exception("Consecutive num");
}
}
else
{
counter = 1;
}
}
// nonConsecutiveNum
IDictionary<int, int> resultCountDictionary = new Dictionary<int,int>();
foreach (var listSensor in ListSensors)
{
if (resultCountDictionary.ContainsKey(listSensor.Result))
{
resultCountDictionary[listSensor.Result] = resultCountDictionary[listSensor.Result] + 1;
if (resultCountDictionary[listSensor.Result] >= nonConsecutiveNum)
{
throw new Exception();
}
}
else
{
resultCountDictionary.Add(listSensor.Result, 1);
}
}

Consecutive:
Using MoreLinq's Window function:
ListSensors.Window(consecutiveNum).Any(x => x.Distinct().Count() == 1);
Nonconsecutive:
ListSensors.Any(x => ListSensors.Count(s => s == x) >= nonConsecutiveNum);

Can't figure out why my function is not being called

Not sure how stackoverflow questions work, but I am trying to piggy-back off my earlier issue.
I have got rid of all the errors and dig is not null anymore because I actually needed it to have a value and I realized that from people's help earlier but now my function is not being called.
What am I missing??
"Dig" is defined early in my code (public string dig = default;)
private void button1_Click(object sender, EventArgs e)
{
using (StreamWriter objWriter = new StreamWriter("C:\\temp\\Test.txt"))
{
int numpins = int.Parse(textBox1.Text);
string basepin = textBox2.Text;
int pinlength = basepin.Length;
string formatspecifier = "{0:d" + pinlength.ToString() + "}";
long pinnumber = long.Parse(basepin);
for (int d = 0; d < numpins; d++)
{
dig = basepin;
if (dig == null)
{
throw new Exception("null value not allowed");
}
else
{
GetCheckDigit(dig);
}
basepin = string.Format(formatspecifier, pinnumber);
objWriter.WriteLine(basepin);
pinnumber++;
}
objWriter.Close();
}
}
This is my function
private static string GetCheckDigit(string dig)
{
var sum = 0;
var result = true;
var digits = dig.ToCharArray();
for (int i = digits.Length - 1; i >= 0; i--)
{
var num = digits[i] - 48;
if (result)
{
num *= 2;
if (num > 9)
num -= 9;
}
sum += num;
result = !result;
}
if ((sum % 10) == 0)
{
return "0";
}
return (10 - (sum % 10)).ToString();
}

Unless numpins is lower than 0 or basepin is null, GetCheckDigit(dig) is being called.
In case you meant it doesn't output anything to the screen it's because
GetCheckDigit(dig) doesn't output anything to screen, just returns the string.

Labeling checkTypes for biometric attendance

I have a table named Attendancelogs where I am saving the records that I fetch from a biometric device, the table structure is;
LogType defines the type of log i.e. Biometric/Manual
CheckType defines the type of entry i.e. I or O
VerifyMode defines the type of punch i.e. Fingerprint/Password
isIgnore is used to exclude an entry from the logs.
Now, what I am trying to do is to write a function called sortFunc(); that will process on the already stored records in the Attendancelogs table. what this is suppose to do is;
Mark the checkType of each employee as I for the first entry, then O for their second entry of the date and so on.
If an employee has a last I at the end of the day, meaning no check out, then the next day's first punch of that employee (with in 12 AM - 7 AM) is considered check out for the previous day (marking as a nighter case for that employee) the rest entries are considered as sequential I and O.
any multiple entries within 10 seconds (or defined time) is ignored and marked CheckType as "Auto Ignored for x seconds"
If an employee is not allowed to use Card/Password then his CheckTypes are marked as Card not allowed or Password not allowed
Here is the function that I wrote;
public static bool inn = true;
public void sortLogs(int machineNum)
{
DateTime prevDate = DateTime.MinValue;
DateTime currentDate = DateTime.MinValue;
DateTime prevDateTime = DateTime.MinValue;
DateTime currentDateTime = DateTime.MinValue;
TimeSpan lowerBound = TimeSpan.Zero;
TimeSpan upperBound = TimeSpan.Zero;
var time = DateTime.ParseExact("00:00:00", "HH:mm:ss", null).ToString("hh:mm:ss tt", CultureInfo.GetCultureInfo("en-US"));
lowerBound = Convert.ToDateTime(time).TimeOfDay;
var time2 = DateTime.ParseExact("07:00:00", "HH:mm:ss", null).ToString("hh:mm:ss tt", CultureInfo.GetCultureInfo("en-US"));
upperBound = Convert.ToDateTime(time2).TimeOfDay;
upperBound = new TimeSpan(7, 0, 0);
var CheckType = "N/S";
bool isNighter = false;
List<AttendanceLog> firstDates = new List<AttendanceLog>();
AttendanceLog lastEmp = new AttendanceLog();
var empList = db.AttendanceLogs.OrderBy(x => x.EmpID).ThenBy(x => x.DateTime).ToList();
var countEmps = empList.DistinctBy(p => p.EmpID).Count();
string[,] array = new string[countEmps, 2];
var checkDevice = db.DeviceInformations.Where(xy => xy.DeviceID == machineNum && xy.IsActive == 1.ToString()).ToList();
AttendanceLog firstObj = new AttendanceLog();
int counter = 0;
int tempEmp = -1;
foreach (var emp in empList)
{
if (emp.EmpID == 0)
continue;
var cardAcceptance = db.Roles.Where(x => x.EmpID == emp.EmpID && x.Card_Acceptance == true).ToList();
var passwordAcceptance = db.Roles.Where(x => x.EmpID == emp.EmpID && x.Password_Acceptance == true).ToList();
currentDate = emp.Date;
currentDateTime = emp.DateTime;
if (emp.EmpID != tempEmp)
{
inn = true;
}
if (prevDateTime != DateTime.MinValue)
{
var seconds = (emp.DateTime - prevDateTime).TotalSeconds;
var settings = db.settings.Where(xy => xy.Constant_Name == "Entry Delay").FirstOrDefault();
if (settings.Constant_Value <= 0)
settings.Constant_Value = 10;
else
if (seconds > 0 && seconds < settings.Constant_Value)
{
//store prevDateTime in deleted table
emp.CheckType = "Auto Ignored: " + seconds + " seconds interval.";
// prevDateTime = emp.DateTime;
continue;
}
}
if (passwordAcceptance.Count <= 0)
{
if (emp.VerifyMode == "3")
{
try
{
emp.CheckType = "Password not allowed";
//db.SaveChanges();
continue;
}
catch (DbEntityValidationException e)
{
foreach (var eve in e.EntityValidationErrors)
{
foreach (var ve in eve.ValidationErrors)
{
}
}
throw;
}
}
}
if (cardAcceptance.Count <= 0)
{
if (emp.VerifyMode == "4")
{
try
{
emp.CheckType = "Card not allowed";
// db.SaveChanges();
continue;
}
catch (DbEntityValidationException e)
{
foreach (var eve in e.EntityValidationErrors)
{
foreach (var ve in eve.ValidationErrors)
{
}
}
throw;
}
}
}
if (counter != countEmps)
{
if (emp.EmpID != firstObj.EmpID)
{
array[counter, 0] = emp.EmpID.ToString();
firstObj.EmpID = emp.EmpID;
firstObj.Date = emp.Date;
counter++;
}
}
if (currentDate == firstObj.Date)
{
//check for entry delay
//get emp datetime here
//comapre with the slots
//if the datetime exsits in between
//otherwise store it with boolean flag for the first entry only, the rest should not be flagged
if (emp.DateTime.TimeOfDay > lowerBound && emp.DateTime.TimeOfDay < upperBound)
{
//consider the first check as nighter and then ignore the rest
}
else {
//checks after the upperBound means, no nighter
}
if (inn)
{
inn = false;
emp.CheckType = "I";
}
else
{
inn = true;
emp.CheckType = "O";
}
for (int i = 0; i < array.Length / 2; i++)
{
if (array[i, 0] == emp.EmpID.ToString())
{
array[i, 1] = emp.CheckType;
break;
}
}
//CheckType = emp.CheckType;
prevDate = currentDate;
prevDateTime = currentDateTime;
}
else
{
if (prevDate != currentDate)
{
if (emp.DateTime.TimeOfDay > lowerBound && emp.DateTime.TimeOfDay < upperBound)
{
//consider the first check as nighter and then ignore the rest
if (inn)
{
inn = false;
emp.CheckType = "I";
}
else
{
inn = true;
emp.CheckType = "O";
}
for (int i = 0; i < array.Length / 2; i++)
{
if (array[i, 0] == emp.EmpID.ToString())
{
array[i, 1] = emp.CheckType;
break;
}
}
//CheckType = emp.CheckType;
prevDate = currentDate;
prevDateTime = currentDateTime;
}
else
{
//checks after the upperBound means, no nighter
}
for (int i = 0; i < array.Length / 2; i++)
{
if (array[i, 0] == emp.EmpID.ToString())
{
if (array[i, 1] == "I")
{
emp.CheckType = "O";
inn = true;
}
else
{
emp.CheckType = "I";
inn = false;
}
}
}
}
else
{
if (inn)
{
inn = false;
emp.CheckType = "I";
}
else
{
inn = true;
emp.CheckType = "O";
}
for (int i = 0; i < array.Length / 2; i++)
{
if (array[i, 0] == emp.EmpID.ToString())
{
array[i, 1] = emp.CheckType;
}
}
}
prevDate = currentDate;
}
tempEmp = emp.EmpID.Value;
}
db.SaveChanges();
}
This did run but it messes up the "12 AM to 7 AM" checks and the password checks, i.e. not the accurate results.
As one of the example seen ^ consecutive O should not be there. I have been going crazy over this!

Inputting values for jagged array

Ok, I'm attempting to make a simple program that reads in number of pizzas sold for a given day and then have the user input the type of pizza sold for that day (with this I need to use the Split() with the user input).
I'm having issues populating the columns for my jagged array.
Now, I can get what I have to work for only 1 pizza sold, but anything beyond that it is not taking in my user input for the type of pizzas sold for that day (the column values). It's not reading in the user input as separate items so once I input, it goes to the next line like it's waiting for data instead of moving on. (Since I'm testing this for one day, it would end the program once the user input was read in).
I'm not quite sure where my issue is with my loops putting in my column values, but I'm figuring it has something with reading in the user input and placing that in the column of the jagged array. Any help would be great.
static void Main(string[] args)
{
Greeting();
string[][] pizza = new string[7][];
GetPizzas(pizza);
}
static void Greeting()
{
Write("Welcome to Z's Pizza Report!");
}
static void GetPizzas(string[][] array)
{
int numOfPizza;
string day;
for (int r = 0; r < array.Length; r++)
{
if (r == 0)
{
day = "Monday";
Write("How many total pizzas were there for {0}? ", day);
numOfPizza = int.Parse(ReadLine());
while (numOfPizza < 0)
{
Write("Number cannot be negative. Try Again: ");
numOfPizza = int.Parse(ReadLine());
}
array[r] = new string[numOfPizza];
Write("Enter all the pizzas for {0}, seperated by spaces: ", day);
for (int c = 0; c < array[r].Length; c++)
{
string total = ReadLine();
array[c] = total.Split(' ');
while (array[r] != array[c])
{
Write("Input does not match number needed. Try Again: ");
total = ReadLine();
array[c] = total.Split(' ');
}
}
}
else if (r == 1)
{
day = "Tuesday";
}
else if (r == 2)
{
day = "Wednesday";
}
else if (r == 3)
{
day = "Thursday";
}
else if (r == 4)
{
day = "Friday";
}
else if (r == 5)
{
day = "Saturday";
}
else
{
day = "Sunday";
}
}
}

The code seems overly complicated to me, but does something like this help? Oh, notice that I'm using the built-in DayOfWeek enum to parse the friendly name for the day. The difference between this and yours is that Sunday is day 0.
This line of code casts the integer to the enum, and then gets the string value:
var dayOfWeek = ((DayOfWeek)i).ToString();
I also added a helper function to get an integer from the user. It takes in a prompt string, an error string, an optional min value and an optional max value, then it prompts the user for an integer and won't return until they enter a valid value:
static int GetIntFromUser(string prompt, string error,
int minValue = int.MinValue, int maxValue = int.MaxValue)
{
int result;
if (!string.IsNullOrEmpty(prompt)) Console.Write(prompt);
while (!int.TryParse(Console.ReadLine(), out result)
|| result < minValue || result > maxValue)
{
if (!string.IsNullOrEmpty(error)) Console.Write(error);
}
return result;
}
The rest of the code looks like:
static void Main(string[] args)
{
var pizzasSold = new string[7][];
GetPizzas(pizzasSold);
for (int i = 0; i < pizzasSold.Length; i++)
{
var dayOfWeek = ((DayOfWeek)i).ToString();
Console.WriteLine("You sold {0} pizzas on {1}: {2}",
pizzasSold[i].Length, dayOfWeek, string.Join(", ", pizzasSold[i]));
}
Console.Write("\nDone!\nPress any key to exit...");
Console.ReadKey();
}
static void GetPizzas(string[][] array)
{
for (int r = 0; r < array.Length; r++)
{
var dayOfWeek = ((DayOfWeek)r).ToString();
var numPizzasSold =
GetIntFromUser($"How many total pizzas were there for {dayOfWeek}? ",
"Number cannot be negative. Try Again: ", 0);
Console.Write($"Enter all the pizzas for {dayOfWeek}, seperated by spaces: ");
var pizzasSold = Console.ReadLine().Split(new[] { ' ' },
StringSplitOptions.RemoveEmptyEntries);
while (pizzasSold.Length != numPizzasSold)
{
Console.Write($"Input does not match number needed. Try Again: ");
pizzasSold = Console.ReadLine().Split(new[] { ' ' },
StringSplitOptions.RemoveEmptyEntries);
}
array[r] = pizzasSold;
}
}

using System;
namespace ConsoleApp12
{
class Program
{
static void Main(string[] args)
{
int[][] n = new int[3][];
int i;
n[0] = new int[4];
n[1] = new int[3];
n[2] = new int[2];
// n[1] = new int[] { 1, 2, 3 };
// Console.WriteLine("enter the rollno");
for (i = 0; i < 4; i++)
{
n[0][i] = Convert.ToInt32(Console.ReadLine());
}
for (i = 0; i < 3; i++)
{
n[1][i] = Convert.ToInt32(Console.ReadLine());
}
for (i = 0; i < 2; i++)
{
n[2][i] = Convert.ToInt32(Console.ReadLine());
}
// for (i = 0; i < 3; i++)
// {
// n[i][j] = Convert.ToInt32(Console.ReadLine());
//}
for (i = 0; i <4; i++)
{
Console.Write(n[0][i] + " ");
}
Console.WriteLine();
for (i = 0; i < 3; i++)
{
Console.Write(n[1][i] + " ");
}
}
}
}